ABSTRACT
A tractor-based robot with the capability of real-time assessing and visualizing the radioactive material density and fertility distribution of farmlands has been developed to accelerate the recovery process of the farmlands suffered by the accident of the Fukushima Daiichi Nuclear Power Plant (FDNPP). In a field test at a decontaminated farmland near FDNPP, within-field heterogeneities of soil contamination and fertility are clarified almost in real-time. Results obtained by this robot are consistent with the map by the conventional soil sampling or the history of decontamination activities.
Subject(s)
Fukushima Nuclear Accident , Radiation Monitoring , Robotics , Soil Pollutants, Radioactive , Cesium Radioisotopes/analysis , Farms , Fertility , Japan , Nuclear Power Plants , Radiation Monitoring/methods , Soil , Soil Pollutants, Radioactive/analysisABSTRACT
It has been found that ion implantation can induce a swelling (step-height) phenomenon on crystal surface. In this paper, we studied about the control of swelling height of Si crystal by irradiating Ar beam under various parameters (fluence, charge and energy). These irradiation parameters were regulated by an irradiation facility that enables to achieve the multiple ionization. For both charges, the swelling height was studied with the various fluencies of two different charges Ar(1+) and Ar(4+). The swelling height increased with increasing the fluence. The swelling height was also studied by changing energy of Ar(4+) beam. The swelling height increased by increasing the energy. The obtained swelling heights are understood base on the contribution of ion-beam induced defect, which is evaluated by SRIM. By comparing with the previous results, it was found that the expansion phenomena also depend on irradiated ion. The swelling structures were found to be stable more than two months. The present results have shown that this method of producing swelling structure indicates the potential application to fabricate 3-D nanostructure.
Subject(s)
Argon , Crystallization/methods , Nanostructures/chemistry , Nanostructures/ultrastructure , Silicon/chemistry , Silicon/radiation effects , Heavy Ions , Macromolecular Substances/chemistry , Materials Testing , Molecular Conformation , Nanostructures/radiation effects , Particle Size , Surface PropertiesABSTRACT
In various fields of nanotechnology, the importance of nanoscale three-dimensional (3D) structures is increasing. In order to develop an efficient process to fabricate nanoscale 3D structures, we have applied highly charged ion (HCI) beams to the ion-beam lithography (IBL) technique. Ar-ion beams with various charge states (1+ to 9+) were applied to fabricate spin on glass (SOG) and Si by means of the IBL technique. The Ar ions were prepared by a facility built at Kochi University of Technology, which includes an electron cyclotron resonance ion source (NANOGAN, 10 GHz). IBL fabrication was performed as a function of not only the charge state but also the energy and the dose of Ar ions. The present results show that the application of an Ar(9+) beam reduces the etching time for SOG and enhances the etching depth compared with those observed with Ar ions in lower charged states. Considering the high-energy deposition of HCI at a surface, the former phenomena can be understood consistently. Also, the latter phenomena can be understood based on anomalously deep structural changes, which are remarkable for glasses. Furthermore, it has also been shown that the etching depth can be easily controlled with the kinetic energy of the Ar ions. These results show the possibilities of the IBL technique with HCI beams in the field of nanoscale 3D fabrication.
