Multienzyme Mimicking Cascade Mn3O4 Catalyst to Augment Reactive Oxygen Species Elimination and Colorimetric Detection: A Study of Phase Variation upon Calcination Temperature.

Over decades, nanozyme has served as a better replacement of bioenzymes and fulfills most of the shortcomings and intrinsic disadvantages of bioenzymes. Recently, manganese-based nanomaterials have been highly noticed for redox-modulated multienzyme mimicking activity and wide applications in biosensing and biomedical science. The redox-modulated multienzyme mimicking activity was highly in tune with their size, surface functionalization, and charge on the surface and phases. On the subject of calcination temperature to Mn3O4 nanoparticles (NPs), its phase has been transformed to Mn2O3 NPs and Mn5O8 NPs upon different calcination temperatures. Assigning precise structure-property connections is made easier by preparing the various manganese oxides in a single step. The present study has focused on the variation of multienzyme mimicking activity with different phases of Mn3O4 NPs, so that they can be equipped for multifunctional activity with greater potential. Herein, spherical Mn3O4 NPs have been synthesized via a one-step coprecipitation method, and other phases are obtained by direct calcination. The calcination temperature varies to 100, 200, 400, and 600 °C and the corresponding manganese oxide NPs are named M-100, M-200, M-400, and M-600, respectively. The phase transformation and crystalline structure are evaluated by powder X-ray diffraction and selected-area electron diffraction analysis. The different surface morphologies are easily navigated by Fourier transform infrared, field-emission scanning electron microscopy, and high-resolution transmission electron microscopy analysis. Fortunately, for the mixed valence state of Mn3O4 NPs, all phases of manganese oxide NPs showed multienzyme mimicking activity including superoxide dismutase (SOD), catalase, oxidase (OD), and peroxidase; therefore, it offers a synergistic antioxidant ability to overexpose reactive oxygen species. Mn3O4 NPs exhibited good SOD-like enzyme activity, which allowed it to effectively remove the active oxygen (O2•-) from cigarette smoke. A sensitive colorimetric sensor with a low detection limit and a promising linear range has been designed to detect two isomeric phenolic pollutants, hydroquinone (H2Q) and catechol (CA), by utilizing optimized OD activity. The current probe has outstanding sensitivity and selectivity as well as the ability to visually detect two isomers with the unaided eye.

Phase variation of manganese oxide in the MnO@ZnO nanocomposite with calcination temperature and its effect on structural and biological activities.

Having powerful antibacterial and antioxidant effects, zinc oxide and manganese oxide nanomaterials are of great interest. Here we have synthesized manganese oxide decorated zinc oxide (MZO) nanocomposites by co-precipitation method, calcined at different temperatures (300-750 °C) and studied various properties. Here the crystalline structure of the nanocomposite and phase change of the manganese oxide are observed with calcination temperature. The average crystalline size increases and the dislocation density and microstrain decrease with the increase in calcined temperature for the same structural features. The formation of composites was confirmed by XRD pattern and SEM images. EDAX spectra proved the high purity of the composites. Here, different biological properties change with the calcination temperature for different shapes, sizes and structures of the nanocomposite. Nanomaterial calcined at 750 °C provides the best anti-microbial activity against Escherichia coli, Salmonella typhimurium, Shigella flexneri (gram-negative), Bacillus subtilis and Bacillus megaterium (gram-positive) bacterial strain at 300 µg/mL concentration. The nanomaterial with calcination temperatures of 300 °C and 450 °C provided better antioxidant properties.

Label-Free Detection of Epinephrine Using Flower-like Biomimetic CuS Antioxidant Nanozymes.

A biosensor comprising crystalline CuS nanoparticles (NPs) was synthesized via a one-step simple coprecipitation route without involvement of a surfactant. The powder X-ray diffraction method has been used to evaluate the crystalline nature and different phases consist of the formation of CuS NPs. Mainly hexagonal unit cells consist of the formation of CuS NP unit cells. Most of the surfaces are covered with rhombohedral microparticles with a smooth exterior and surface clustering, examined by SEM images, and the shape of NPs was spherical, having an average size of 23 nm, as confirmed by TEM analysis. This study has focused on the peroxidase-mimicking activity, superoxide dismutase (SOD)-mimicking activity, and chemosensor-based colorimetric determination and detection of epinephrine (EP) neurotransmitters with excellent selectivity. The CuS NPs catalyzed the oxidation of the oxidase substrate 3, 3-5, 5 tetramethyl benzidine (TMB) with the help of supplementary H2O2 that followed Michaelis-Menten kinetics with excellent Km and Vmax values calculated by the Lineweaver-Burk plot. Taking advantage of the drop in absorbance upon introduction of EP for the CuS NPs-TMB/H2O2 system, a colorimetric route has been developed for selective and real-time detection of EP. The sensitivity of the new colorimetric probe was vibrant, having a linear range of 0-16 µM, and achieved a low limit of detection of 457 nM. Moreover, the present nanosystem exhibited appreciable SOD-mimicking activity which could effectively remove O2•- from commercial cigarette smoke, along with it acting as a potential radical scavenger as well. The new nanosystem effectively scavenged •OH, O2.-, and metal chelation which were investigated calorimetrically.

Assembled Bisphenol A with cyclic oligosaccharide as the controlled release complex to reduce risky effects.

Herein, in order to improve the bioavailability of a non-biodegradable pollutant, inclusion complexation procedures had been used to develop better formulations of this pollutant, Bisphenol A (BPA). In our research, an inclusion complex (IC) of ß-cyclodextrin (ß-CD) with BPA was formed to investigate the effect of ß-CD on the water solubility, anti-oxidant, anti-bacterial activity, toxicity, and thermal stability of BPA. UV-Vis and other spectrometric methods such as NMR, FTIR, and XRD indicated the molecular mechanism of interactions between ß-CD and BPA, which was further hypothesized using molecular modeling to confirm preliminary results. Studies of TGA and DSC demonstrated that encapsulation boosted the thermal stability of BPA. This research also makes predictions about BPA's release behavior when CT-DNA is present. In vitro testing of the IC's antibacterial activities showed that it outperformed pure BPA. The in silico study was found to have a considerable decrease in toxicity level for IC compared to pure BPA. Therefore, ß-CD-encapsulated BPA can lessen toxicity by raising antioxidant levels. Additionally, as its antibacterial activity increases, it may be employed therapeutically. Thus, this discovery of creating BPA formulations with controlled release and/or protective properties allows for a more logical application of BPA by reducing its hazardous effects through boosting its efficacy.

Exploring inclusion complex of an anti-cancer drug (6-MP) with ß-cyclodextrin and its binding with CT-DNA for innovative applications in anti-bacterial activity and photostability optimized by computational study.

The co-evaporation approach was used to examine the host-guest interaction and to explore the cytotoxic and antibacterial properties of an important anti-cancer medication, 6-mercaptopurine monohydrate (6-MP) with ß-cyclodextrin (ß-CD). The UV-Vis investigation confirmed the inclusion complex's (IC) 1 : 1 stoichiometry and was also utilized to oversee the viability of this inclusion process. FTIR, NMR, and XRD, among other spectrometric techniques, revealed the mechanism of molecular interactions between ß-CD and 6-MP which was further hypothesized by DFT to verify tentative outcomes. TGA and DSC studies revealed that 6-MP's thermal stability increased after encapsulation. Because of the protection of drug 6-MP by ß-CD, the formed IC was found to have higher photostability. This work also predicts the release behavior of 6-MP in the presence of CT-DNA without any chemical changes. An evaluation of the complex's antibacterial activity in vitro revealed that it was more effective than pure 6-MP. The in vitro cytotoxic activity against the human kidney cancer cell line (ACHN) was also found to be significant for the IC (IC50 = 4.18 µM) compared to that of pure 6-MP (IC50 = 5.49 µM). These findings suggest that 6-MP incorporation via ß-CD may result in 6-MP stability and effective presentation of its solubility, cytotoxic and antibacterial properties.

Probing the Molecular Assembly of a Metabolizer Drug with ß-Cyclodextrin and Its Binding with CT-DNA in Augmenting Antibacterial Activity and Photostability by Physicochemical and Computational Methodologies.

The assembly of an inclusion complex in an aqueous medium using a metabolizer drug (dyphylline) as guest and ß-cyclodextrin as host has been established, which is extremely appropriate for a variety of applications in modern biomedical sciences. The formation of the inclusion complex is established by 1H NMR, and surface tension and conductivity measurements demonstrate that the inclusion complex was produced with 1:1 stoichiometry. The thermodynamic parameters based on density, viscosity, and refractive index measurements were used to determine the nature of the complex. This research also forecasts how dyphylline will release in the presence of CT-DNA without any chemical modifications. The produced insertion complex (IC) has a higher photostability due to the drug dyphylline being protected by ß-CD. The antibacterial activity of dyphylline greatly improved after complexation and exhibited higher toxicity against Gram-negative (highest against Escherichia coli) in comparison to Gram-positive bacteria. The encapsulation mode of the dyphylline molecule into the cavity of the ß-CD was also investigated using DFT to confirm preliminary results.

ß-Cyclodextrin-Stabilized Biosynthesis Nanozyme for Dual Enzyme Mimicking and Fenton Reaction with a High Potential Anticancer Agent.

The myth of inactivity of inorganic materials in a biological system breaks down by the discovery of nanozymes. From this time, the nanozyme has attracted huge attention for its high durability, cost-effective production, and easy storage over the natural enzyme. Moreover, the multienzyme-mimicking activity of nanozymes can regulate the level of reactive oxygen species (ROS) in an intercellular system. ROS can be generated by peroxidase (POD), oxidase (OD), and Fenton-like catalytic reaction by a nanozyme which kills the cancer cells by oxidative stress; therefore, it is important in CDT (chemo dynamic therapy). Our current study designed to investigate the enzyme mimicking behavior and anticancer ability of cerium-based nanomaterials because the cerium-based materials offer a high redox ability while maintaining nontoxicity and high stability. Our group synthesized CeZrO4 nanoparticles by a green method using ß-cyclodextrin as a stabilizer and neem leaf extract as a reducing agent, exhibiting POD- and OD-like dual enzyme activities. The best enzyme catalytic activity is shown in pH = 4, indicating the high ROS generation in an acidic medium (tumor microenvironment) which is also supported by the Fenton-like behavior of CeZrO4 nanoparticles. Inspired by the high ROS generation in vitro method, we investigated the disruption of human kidney cells by this nanoparticle, successfully verified by the MTT assay. The harmful effect of ROS in a normal cell is also investigated by the in vitro MTT assay. The results suggested that the appreciable anticancer activity with minimal side effects by this synthesized nanomaterial.