Reversible Electrochromic/Electrofluorochromic Dual Switching in Zn(II)-Based Metallo-Supramolecular Polymer Films.

The introduction of novel materials with multifunctional chromogenic properties, such as electrochromic/electrofluorochromic (EC/EFC) properties, has recently attracted prospective interest in the development of various optoelectronic devices and smart windows. In this study, a novel Zn(II)-based metallo-supramolecular polymer (polyZn) has been developed as an ON/OFF switchable EFC application with prominent EC behavior. In this regard, the polymeric chain of polyZn was first synthesized by 1:1 complexation in a zigzag manner with Zn(II) ions at the metal center and 4,4'-[bis(2,2':6',2″-terpyridinyl)benzene]triphenylamine (LTPY-TPA) as the redox-active ditopic ligand. The polyZn exhibits excellent solubility in organic solvents and can form a very good uniform thin film on an indium tin oxide/glass substrate by spin-coating. In a neutral state, transparent polyZn exhibits a bright yellow color to the naked eye (absorption at ∼325 nm). The electroactive triphenylamine (TPA) core of LTPA-TPY, however, undergoes reversible single-electron oxidation when a positive bias of +1.6 V vs Ag/Ag+ is applied, generating radical cations (TPA ↔ TPA•+) with a significant drop in transparency (77%). A noticeable chromic shift in the hue of the film from brilliant yellow to green was observed with the appearance of a near-infrared absorption band at ∼897 nm with a tail of 1300-1600 nm. Interestingly, in addition to this EC phenomenon, the fabricated solid-state polyZn film exhibits intense, high-contrast reddish-orange photoluminescence with λem = 650 nm, which is significantly desired as a molecular probe for bioimaging. Both the TPA core and the redox-inactive Zn(II)-terpyridine core emit orange-red photoluminescence in polyZn, which is significantly quenched upon the oxidation of the film and is re-emitted at 0.0 V vs Ag/Ag+. This ON/OFF EFC transition was sustained for several cycles. This study should motivate to design and create distinctive new unique materials with combined EC/EFC behavior for the fabrication of optoelectronic devices by combining a metal-fluorescent core with a redox-active spacer.

The Role of Emerging Technologies to Fight Against COVID-19 Pandemic: An Exploratory Review.

Since the end of the year 2019, the whole world is experiencing a global emergency due to the COVID-19 pandemic. The major sectors including industry, economics, education have been affected. Ongoing pandemics confined us to avoid mass gathering and rigorously maintain social distancing to mitigate the spreading of this infectious disease. In this situation emerging technologies including the internet of things (IoT), Artificial Intelligence (AI) is playing a very important role in various fields such as healthcare, economics, educational system, and others to monitoring or tackle the impact of COVID-19 pandemic. Several papers discussed the impact of IoT on the COVID-19 pandemic in various aspects. However, the challenges and designing issues towards the implementation of IoT-based monitoring systems are not deeply investigated. Alongside, the adaptation of IoT and other technologies in the post-covid situation is not addressed properly. Our review article provides an up to date extensive survey on how IoT-enabled technologies are helping to combat the pandemic and to manage industry, education, economic, and medical system. As result, the realization is that IoT and other associated technologies have a great impact on virus detection, tracking, and mitigate the spread. In the face of an expeditiously spreading pandemic, the associated designing issues of the IoT-based framework have been looked into as a part of this review. Alongside, this review highlights the major challenges like privacy, security scalability, etc. facing in using such technologies. Finally, we explore 'The New Normal' and the use of technologies to help in the post-pandemic era.

Isomerization-Induced Excimer Formation of Pyrene-Based Acylhydrazone Controlled by Light- and Solvent-Sensing Aromatic Analytes.

Pyrene is a fluorescent polycyclic aromatic hydrocarbon, and it would be interesting to determine whether its C═N-based conjugate can be used for sensing of aromatic analytes at its supramolecular aggregated state. For this purpose, we have synthesized (E)-3,4,5-tris(dodecyloxy)-N'-(pyren-1-ylmethylene)benzohydrazide (Py@B) by alkylation, substitution, and the Schiff base reaction methodology. The E-isomer of Py@B (E-Py@B) exhibits a bright fluorescence due to excimer formation in nonaromatic solvents. Upon photoirradiation with λ = 254 nm, it exhibits E-Z isomerization across the C═N bond at a low concentration (10-4 M), resulting in a quenched fluorescence intensity, and interestingly, upon photoirradiation with λ = 365 nm, the Z-isomer of Py@B returns to the E-isomer again, indicating that E-Z isomerization of Py@B is reversible in nature. The thick supramolecular aggregated morphology of E-Py@B changes to a flowery needlelike morphology after photoirradiation with λ = 254 nm. The UV-vis absorption band at 370 nm for 10-4 M Py@B in methyl cyclohexane (MCH) is due to excimer formation for closer proximity of pyrene moieties present in E-Py@B and changes to the absorption peak at 344 nm for its Z-isomer formation. The fluorescence spectroscopy results also support the fact that the optimum concentration of the E-isomer of Py@B is 2 × 10-4 M in MCH for excimer formation. From spectral results, it may be concluded that nonaromatic solvents assist in constructing the excimer, but aromatic solvents resist forming an excimer complex of E-Py@B. The fluorescent emission of E-Py@B in MCH is quickly quenched on addition of different aromatic analytes through both static and dynamic pathways. In the solid state, E-Py@B also senses aromatic vapors efficiently via fluorescence quenching. Absorbance spectra of a model molecule obtained using time-dependent density functional theory (TDDFT) calculations on a DFT-optimized structure indicate complex adduct formation between E-Py@B and aromatic analytes from the well-matched theoretical and experimental UV-vis spectra on addition of different analytes with E-Py@B.

Single Amino-Acid Based Self-Assembled Biomaterials with Potent Antimicrobial Activity.

The design and development of soft biomaterials based on amino acid and short-peptide have gained much attention due to their potent biomedical applications. A slight alteration in the side-chain of single amino acid in a peptide or protein sequence has a huge impact on the structure and function. Phenylalanine is one of the most studied amino acids, which contains an aromatic phenyl group connected through a flexible -CH2 - unit. In this work, we have examined whether flexibility and aromatic functionality of phenylalanine (Phe) are important in gel formation of model gelator Fmoc-Phe-OH or not. To examine this hypothesis, we synthesized Fmoc-derivatives of three analogues unnatural amino acids including cyclohexylalanine, phenylglycine, and homophenylalanine; which are slightly varied from Phe. Interestingly, all these three new analogues formed hydrogels in phosphate buffer at pH 7.0 having different gelation efficacy and kinetics. This study suggests that the presence of aromatic side-chain and flexibility are not mandatory for the gelation of this model gelator. Newly synthesized unnatural amino acid derivatives have also exhibited promising antimicrobial activity towards gram-positive bacteria by inhibiting cellular oxygen consumption. We further determined the biocompatibility of these amino acid derivatives by using a hemolysis assay on human blood cells. Overall studies described the development of single amino acid-based new injectable biomaterials with improved antimicrobial activity by the slight alteration in the side-chain of amino acid.

Ru(II)-Based Metallo-Supramolecular Polymer with Tetrakis(N-methylbenzimidazolyl)bipyridine for a Durable, Nonvolatile, and Electrochromic Device Driven at 0.6 V.

Low-voltage operation, high durability, and long memory time are demanded for electrochromic (EC) display device applications. Metallo-supramolecular polymers (MSPs), composed of a metal ion and ditopic ligand, are one of the recently developed EC materials, and the ligand modification is expected to tune the redox potential of MSP. In order to lower the redox potential of MSP, tetrakis(N-methylbenzimidazolyl)bipyridine (LBip) was designed as an electronically rich ligand. Ru-based MSP (polyRu-LBip) was successfully synthesized by 1:1 complexation of RuCl2(DMSO)4 with LBip. The molecular weight (Mw) was high (8.8 × 106 Da) enough to provide a simple 1H NMR spectrum, of which the proton peaks could be assigned by the comparison with the spectrum of the corresponding mono-Ru complex. The redox potential (E1/2) between Ru(II/III) was 0.51 V versus Ag/Ag+, which was much lower than the redox potential of previously reported Ru-based MSP with bis(terpyridyl)benzene (0.95 V vs Ag/Ag+). The polymer film exhibited reversible, distinct color changes between violet and light green-yellow upon applying very low potentials of 0 and 0.6 V vs Ag/Ag+, respectively. The appearance and disappearance of the metal-to-ligand charge transfer absorption by the electrochemical redox between Ru(II/III) were confirmed using in situ spectro-electrochemical measurement. A solid-state EC device with polyRu-LBip was revealed to have large optical contrast (ΔT 54%), fast response time (1.37 s for bleaching and 0.67 s for coloration), remarkable coloration efficiency (571 cm2/C), and high durability for the repeated color changes more than 20,000 cycles. The device also showed a long optical memory time of up to 19 h to maintain 40% to the initial contrast under the open circuit conditions. It is considered that the stabilization of the Ru(III) state by LBip suppressed the self-coloring to Ru(II) inside the device.

Dual-Redox System of Metallo-Supramolecular Polymers for Visible-to-Near-IR Modulable Electrochromism and Durable Device Fabrication.

Dual-redox metallo-supramolecular polymers with a zigzag structure (polyFe-N and polyRu-N) were successfully synthesized by 1:1 complexation of a redox-active Fe(II) or Ru(II) ion and 4,4-bis(2,2:6,2-terpyridinyl)phenyl-triphenylamine (LTPA) as a redox-active ligand. The polymers had high solubility in methanol, and the polymer solutions showed dark brown (polyFe-N) or orange-red (polyRu-N) coloration. UV-vis spectra of the polymers displayed a strong metal-to-ligand charge transfer (MLCT) absorption in the visible region. Cyclic voltammograms of the polymer films exhibited two pairs of reversible redox waves. The first redox at ∼0.5 V versus Ag/Ag+ was assigned to the redox in the triphenylamine (TPA) moiety of LTPA, and the second redox at 0.8 V versus Ag/Ag+ (polyFe-N) or 0.9 V versus Ag/Ag+ (polyRu-N) was given to the redox of Fe(II)/(III) or Ru(II)/(III), respectively. Upon applying a positive potential of more than 0.5 V versus Ag/Ag+ to the polymer films, a new absorption at ∼820 nm in the near-infrared (NIR) region appeared with wide tailing to the longer wavelength. It is considered that the new absorption in the NIR region is caused by the polaron band of the oxidized ligand in the polymers. When the applied potential was increased to 1.0 V versus Ag/Ag+ (polyFe-N) or 1.1 V versus Ag/Ag+ (polyRu-N), the maximum wavelength of the new absorption in the NIR region shifted to 885-900 nm and the absorbance was further enhanced with disappearance of the MLCT absorption. Eventually, the original colors of the polymers were faint to light green. This visible-to-NIR electrochromism was reversible, and maximum optical contrast (ΔT) reached 52% in the visible region and 80% in the NIR region. A prototype solid-state device with the polymer was fabricated for practical utilization, exhibiting excellent cycle stability of >4000 cycles with maintaining high optical contrast from the visible-to-NIR range.

Self-assembling behaviour of a modified aromatic amino acid in competitive medium.

Aromatic amino acid, specifically phenylalanine (Phe), is one of the most studied building blocks in peptide synthesis due to its importance in biology. It is reported in the literature that Phe-containing peptides have a high tendency to form different self-assembled materials due to efficient aromatic-aromatic interactions. In this article, we have tuned the supramolecular interactions of phenylalanine by making it electron-deficient upon introduction of the nitro group in the ring. The presence of the nitro group has a profound influence on the self-assembly process. It has been observed that 4-nitrophenylalanine (4NP) is a highly efficient gelator compared with the native phenylalanine in DMSO solvent in terms of minimum gelation concentration and it forms hydrogen bonding mediated crystals in water. The change of self-assembling patterns of 4NP in these solvents was studied using X-ray diffraction, UV-Vis spectroscopy, FE-SEM and other techniques. With the help of different experimental data and density functional theory (DFT), we have simulated the theoretical structure of 4NP in DMSO. The theoretical structure of 4NP in DMSO is different compared with that of crystals in water. We then studied the self-assembly process of 4NP in the mixed solvent of DMSO (polar aprotic) and water (polar protic). Different competitive non-covalent interactions of solvents as well as the ratio of the solvent mixture guide the final self-assembly state of 4NP.

Dual-Branched Dense Hexagonal Fe(II)-Based Coordination Nanosheets with Red-to-Colorless Electrochromism and Durable Device Fabrication.

Highly dense hexagonal Fe(II)-based coordination nanosheets (CONASHs) were designed by dual-branching, at the metal-coordination moieties and the tritopic ligands, which successfully obtained a liquid/liquid interface by the complexation of Fe(II) ions and the tritopic bidentate ligands. The 1:1 complexation was confirmed by titration. The obtained Fe(II)-based nanosheets were fully characterized by small-angle X-ray scattering (SAXS), atomic force microscopy (AFM), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDX), and X-ray photoelectron spectroscopy (XPS). A monolayer of the sheets was obtained, employing the Langmuir-Blodgett (LB) method, and the determined thickness was ∼2.5 nm. The polymer nanosheets exhibited red-to-colorless electrochromism because the electrochemical redox transformation between Fe(II) and Fe (III) ions controlled the appearance/disappearance of the metal (ion)-to-ligand charge-transfer (MLCT) absorption. The poor π-conjugation in the tritopic ligands contributed to the highly colorless electrochromic state. A solid-state device, with the robust polymer film, exhibited excellent electrochromic (EC) properties, with high optical contrast (ΔT > 65%) and high durability after repeated color changes for >15 000 cycles, upon applying low-operating voltages (+1.5/0 V).

Ni(II)-Based Metallosupramolecular Polymer with Carboxylic Acid Groups: A Stable Platform for Smooth Imidazole Loading and the Anhydrous Proton Channel Formation.

The Ni(II)-based metallosupramolecular polymer with carboxylic acid groups (polyNi) was synthesized via a 1:1 complexation of Ni(II) salt with (4,4'-(9,9-dihexyl-9H-fluorene-2,7-diyl)bis(pyridine-2,6-dicarboxylic acid) for the first time. The divalent state of Ni(II) in the polymer was confirmed by the X-ray absorption fine structure analysis. Smooth loading of imidazole molecules into polyNi proceeded with the help of the carboxylic acid groups to form the imidazole-loaded polyNi (polyNi-Im). Thermogravimetric analysis of polyNi-Im revealed that approximately three imidazole molecules were incorporated per repeating unit of polyNi. The Fourier transform infrared spectrum of polyNi-Im showed a new peak at 3219 cm-1, which shows an ∼73 cm-1 enhancement to -N-H of pristine imidazole. The peak suggests the formation of an imidazolium cation in the polymer. Powder X-ray diffraction indicated no degradation of the polymer structure during the imidazole loading because the diffraction pattern of polyNi-Im was almost the same as that of polyNi except for the presence of peaks corresponding to the imidazole molecules. Interestingly, the scanning electron microscopy measurement showed a large morphological change to uniform spherical particles by loading imidazole to the polymer. PolyNi-Im exhibited good proton conductivity (1.05 × 10-2 mS/cm) at a high temperature (120 °C), which is around 7 orders of magnitude higher than that of pristine polyNi because of the proton conduction pathway formation along the polymer chains by the incorporated imidazole molecules.

Transparent Supercapacitor Display with Redox-Active Metallo-Supramolecular Polymer Films.

The use of metallo-supramolecular polymer (MSP) as a thin-film-based redox supercapacitor electrode material is reported for the first time. Fe(II)- and Ru(II)-based MSPs (polyFe and polyRu, respectively) were synthesized by complexation of appropriate metal salts with 4',4″-(1,4-phenylene)bis-2,2':6',2″-terpyridine, and thin films of these polymers were prepared by spray coating onto an indium tin oxide glass substrate. A study of the energy storage performances of the polyFe and polyRu films in a nonaqueous electrolyte system revealed volumetric capacitances of ∼62.6 ± 3 F/cm3 for polyFe and 98.5 ± 7 F/cm3 for polyRu at a current density of 2 A/cm3. To improve the energy storage performance over a wider potential range, asymmetric supercapacitor (ASC) displays were fabricated with suitable combinations of the MSPs as cathodic materials and Prussian blue as the anodic counter material in a sandwich configuration with a transparent polymeric ion gel as the electrolyte. The fabricated ASCs showed a maximum volumetric energy density (∼10-18 mW h/cm3) that was higher than that of lithium thin-film batteries and a power density (7 W/cm3) comparable to that of conventional electrolyte capacitors, with superb cyclic stability for 10 000 cycles. To demonstrate the practical use of the MSP, the illumination of a light-emitting diode bulb was powered by a laboratory-made device. This work should inspire the development of high-performance thin-film flexible supercapacitors based on MSPs as active cathodic materials.

A review on recent advances in polymer and peptide hydrogels.

In this review, we focus on the very recent developments on the use of the stimuli responsive properties of polymer hydrogels for targeted drug delivery, tissue engineering, and biosensing utilizing their different optoelectronic properties. Besides, the stimuli-responsive hydrogels, the conducting polymer hydrogels are discussed, with specific attention to the energy generation and storage behavior of the xerogel derived from the hydrogel. The electronic and ionic conducting gels have been discussed that have applications in various electronic devices, e.g., organic field effect transistors, soft robotics, ionic skins, and sensors. The properties of polymer hybrid gels containing carbon nanomaterials have been exemplified here giving attention to applications in supercapacitors, dye sensitized solar cells, photocurrent switching, etc. Recent trends in the properties and applications of some natural polymer gels to produce thermal and acoustic insulating materials, drug delivery vehicles, self-healing material, tissue engineering, etc., are discussed. Besides the polymer gels, peptide gels of different dipeptides, tripeptides, oligopeptides, polypeptides, cyclic peptides, etc., are discussed, giving attention mainly to biosensing, bioimaging, and drug delivery applications. The properties of peptide-based hybrid hydrogels with polymers, nanoparticles, nucleotides, fullerene, etc., are discussed, giving specific attention to drug delivery, cell culture, bio-sensing, and bioimaging properties. Thus, the present review delineates, in short, the preparation, properties, and applications of different polymer and peptide hydrogels prepared in the past few years.

Electrochromic Os-based metallo-supramolecular polymers: electronic state tracking by in situ XAFS, IR, and impedance spectroscopies.

In this study, the electronic states of Os-based metallo-supramolecular polymers (poly(OsL)2+) during electrochromism were tracked by in situ X-ray absorption fine structure (XAFS), infrared (IR), and impedance spectroscopies. The XAFS spectra suggested electronic charge migration in the polymer, and the in situ spectra revealed reversible changes caused by electrochemical redox reactions. The IR spectra of the polymers showed an IVCT band, and we also confirmed the reversible changes by applying a voltage to the redox cell. During the impedance measurements, we found a drastic decrease in the charge transfer resistance (R CT) of the polymer films near the electrochemical redox potential.

Triarylamine-Cored Dendritic Molecular Gel for Efficient Colorometric, Fluorometric, and Impedometeric Detection of Picric Acid.

Detection of nitroaromatics at ultralow concentration is a major security concern in defense, forensics, and environmental science. To this end, a new triarylamine-cored dendritic gelator (OGR) was synthesized, which produced thermoreversible, thixotropic, and fluorescent gels in n-octanol. On gelation, both π-π* transitions and the emission peak of the gelator show redshifts with a 4.5-fold increase of fluorescence intensity in the gel state indicating J-aggregation. The nitrogen lone-pair electrons of OGR make it a donor, and electron transfer occurs to acceptor nitroaromatics causing fluorescence quenching, which is further promoted due to its acidity. The Stern-Volmer rate constants measured for different nitroaromatics showed that it senses picric acid (PA) best. The contact-mode technique with OGR-treated paper strips can allow naked-eye detection of PA under UV light down to 10-11 m concentration within 30 s. Reusability of the gel is achieved by treating OGR@PAx with NaOH solution. Impedance spectroscopic results indicated a decrease of both charge-transport resistance and Warburg impedance on successive addition of PA. The limits of detection of PA determined from fluorescence and impedance measurements match well. Thus, the OGR gel is a reusable, low-cost, specific sensor for PA by naked-eye colorimetric, fluorescence, and impedance techniques.

Enhancement of Energy Storage and Photoresponse Properties of Folic Acid-Polyaniline Hybrid Hydrogel by in Situ Growth of Ag Nanoparticles.

Electrically conductive hydrogels are a fascinating class of materials that exhibit multifarious applications such as photoresponse, energy storage, etc., and the three-dimensional micro- and nanofibrillar structures of the gels are the key to those applications. Herein, we have synthesized a hybrid hydrogel based on folic acid (F) and polyaniline (PANI) in which F acts as a supramolecular cross-linker of PANI chains. The gels are mechanically robust and are characterized by field-emission scanning electron microscopy, transmission electron microscopy, and spectroscopic, rheological, and universal testing measurements. The hybrid xerogel exhibit a BET surface area 238 m2 g-1, conductivity of 0.04 S/cm, specific capacitance of 295 F/g at a current density of 1A/g, and photocurrent of ∼2 mA under white-light illumination. Silver nanoparticles (AgNPs) are in situ grown to elegantly improve the conductivity, energy storage, and photoresponse capability of the gels. The formation of AgNPs drastically improves the specific capacitances up to 646 F/g (at current density 1A/g), excellent rate capability (403 F/g at 20 A/g), and stable cycling performance with a retention ratio of 74% after 5000 cycles. The AgNPs embedded gel exhibits dramatic enhancement of photocurrent to 56 mA, and its time-dependent photoillumination corroborates faster rise and decay of current compared to those of folic acid-polyaniline hydrogel.

A Comparative Account of the Kinetics of Light-Induced E-Z Isomerization of an Anthracene-Based Organogelator in Sol, Gel, Xerogel, and Powder States: Fiber to Crystal Transformation.

The organogel of (E)-N'-(anthracene-10-ylmethylene)-3,4,5-tris(dodecyloxy)benzohydrazide (I) in methyl cyclohexane having a fibrillar network structure exhibits excellent fluorescence, which decreases sharply with time upon photoirradiation at λ = 365 nm. It has been attributed to the transformation of the E isomer of I to the Z isomer, and the kinetics of E-Z isomerization are compared for the sol, gel, xerogel, and powder states. The rate constants at different temperatures are measured from Avrami plots and its increase with an increase in temperature, indicating temperature acts as a promoter for photoirradiated E-Z isomeization along the imine (C═N) bond. In the powder form, the rate constant values are the lowest compared to those of other states for all temperatures and the xerogels exhibit the highest rate of E-Z isomerization. The rate constants of sol and gel states mostly lie between the two. The wide-angle X-ray scattering pattern changes after ultraviolet (UV) irradiation with the generation of new sharp peaks whose intensities increase with an increase in irradiation time. A polarized optical microscopic study indicates formation of small crystalline dots on the fibers in the gels, dendritic morphology on the xerogel fibers, and large needlelike morphology at the surface boundary of the solid. The dried I gel exhibits a melting peak at 96.7 °C, but upon irradiation, two peaks are observed at 98.5 and 152.7 °C; the latter has been attributed to the melting of crystals of Z isomers. Similar higher melting peaks are observed both for the xerogel and for powders after UV irradiation; the powders exhibit the highest meting peak at 159.4 °C. Possible reasons for the variation of rate constant values in the four different states and the difference in morphology and melting points of crystals of Z isomers of I are discussed.

Nanoengineering of a Supramolecular Gel by Copolymer Incorporation: Enhancement of Gelation Rate, Mechanical Property, Fluorescence, and Conductivity.

In the quest to engineer the nanofibrillar morphology of folic acid (F) gel, poly(4-vinylpyridine-co-styrene) (PVPS) is judiciously integrated as a polymeric additive because of its potential to form H-bonding and π-stacking with F. The hybrid gels are designated as F-PVPSx gels, where x denotes the amount of PVPS (mg) added in 2 mL of F gel (0.3%, w/v). The assistance of PVPS in the gelation of F is manifested from the drop in critical gelation concentration and increased fiber diameter and branching of F-PVPSx gels compared to that of F gel. PVPS induces a magnificent improvement of mechanical properties: a 500 times increase of storage modulus and ∼62 times increase of yield stress in the F-PVPS5 gel compared to the F gel. The complex modulus also increases with increasing PVPS concentration with a maximum in F-PVPS5 gel. Creep recovery experiments suggest PVPS induced elasticity in the otherwise viscous F gel. The fluorescence intensity of F-PVPSx gels at first increases with increasing PVPS concentration showing maxima at F-PVPS5 gel and then slowly decreases. Gelation is monitored by time-dependent fluorescence spectroscopy, and it is observed that F and F-PVPSx gels exhibit perfectly opposite trend; the former shows a sigmoidal decrease in fluorescence intensity during gelation, but the latter shows a sigmoidal increase. The gelation rate constants calculated from Avrami treatment on the time-dependent fluorescence data manifest that PVPS effectively enhances the gelation rate showing a maximum for F-PVPS5 gel. The hybrid gel exhibit 5 orders increase of dc conductivity than that of F-gel showing semiconducting nature in the current-voltage plot. The Nyquist plot in impedance spectra of F-PVPS5 xerogel exhibit a depressed semicircle with a spike at lower frequency region, and the equivalent circuit represents a complex combination of resistance-capacitance circuits attributed to the hybrid morphology of the gel fibers.

Light induced E-Z isomerization in a multi-responsive organogel: elucidation from (1)H NMR spectroscopy.

A multiresponsive organogel of (E)-N'-(anthracene-10-ylmethylene)-3,4,5-tris(dodecyloxy)benzohydrazide (I) showed a decrease of fluorescence intensity, decrease in mechanical strength and a change in gel morphology on irradiation with a wavelength of 365 nm. This is attributed to the E-Z isomerization across the C=N bond of I as evidenced from (1)H NMR spectroscopy.

Graphene quantum dot-doped polyaniline nanofiber as high performance supercapacitor electrode materials.

Graphene quantum dot-doped polyaniline composites have been prepared by the chemical oxidation of aniline. Synthesized novel fibrous composites show an excellent specific capacitance value of ∼1044 F g(-1) at a current density of 1 A g(-1) as well as moderate cyclic stability with a retention of life time of 80.1% after 3000 cycles.

Facile Decoration of Polyaniline Fiber with Ag Nanoparticles for Recyclable SERS Substrate.

Facile synthesis of polyaniline@Ag composite has been successfully demonstrated by a simple solution-dipping method using high-aspect-ratio benzene tetracarboxylic acid-doped polyaniline (BDP) fiber as a nontoxic reducing agent as well as template cum stabilizer. In BDP@Ag composite, BDP fibers are decorated with spherical Ag nanoparticles (Ag NPs), and the population of Ag NPs on BDP fibers is controlled by changing the molar concentration of AgNO3. Importantly, Ag-NP-decorated BDP fibers (BDP@Ag composites) have been evolved as a sensitive materials for the detection of trace amounts of 4-mercaptobenzoic acid and rhodamine 6G as an analyte of surface-enhanced Raman scattering (SERS), and the detection limit is down to nanomolar concentrations with excellent recyclability. Furthermore, synthesized BDP@Ag composites are applied simultaneously as an active SERS substrate and a superior catalyst for reduction of 4-nitrothiophenol.

Integration of poly(ethylene glycol) in N-fluorenylmethoxycarbonyl-l-tryptophan hydrogel influencing mechanical, thixotropic, and release properties.

Polyethylene glycol (PEG) is incorporated to improve the mechanical properties of N-fluorenylmethoxycarbonyl-l-tryptophan (FT) hydrogel producing the hybrid (FTP) gels designated as FTP1, FTP2.5, etc. having PEG concentrations of 0.05 and 0.125% (w/v), respectively. Both the FT and FTP1 gels exhibit fibrillar network morphology; the fibers of the FTP1 gel are thinner than those of the FT gel. FTP gels exhibit a magnificent improvement in mechanical properties, and the storage and complex moduli increase with a maximum of ∼2800% for the FTP2.5 gel. Creep recovery experiment exhibits a maximum strain recovery of 90% for the FTP1 gel. The thixotropic property is observed for both FT and FTP gels and the rate of recovery increases with increase of PEG concentration; the latter acts as a molecular adhesive to the gel fibers bringing back the network structure easily. Gelation of FT causes a 5-fold increase of fluorescence intensity due to molecular aggregation, and with increase of FT concentration the ratio of fluorescence intensities at 470 and 395 nm increases. Exploiting the thixotropic property of FT and FTP hybrid gels, doxorubicin (DOX) is successfully encapsulated, and tunable release of DOX using appropriate amount of PEG in the gel matrix under physiological conditions is observed.