Association of JAK/STAT genetic variants with cutaneous melanoma.

Background: The Janus-activated kinase (JAK)-signal transducer and activator of transcription (STAT) signaling pathway regulates cutaneous melanoma (CM) development and progression. The JAK1, JAK2, and STAT3 proteins are encoded by polymorphic genes. This study aimed to verify whether single-nucleotide variants (SNVs) in JAK1 (c.1648+1272G>A, c.991-27C>T), JAK2 (c.-1132G>T, c.-139G>A), and STAT3 (c.*1671T>C, c.-1937C>G) altered the risk, clinicopathological aspects, and survival of CM patients as well as protein activity. Methods: CM patients (N = 248) and controls (N = 274) were enrolled in this study. Genotyping was performed by real-time polymerase chain reaction (PCR), and JAK1, JAK2, and STAT3 expression was assessed by quantitative PCR (qPCR). STAT3 c.-1937C>G SNV was investigated by luciferase, qPCR, western blot, apoptosis, and cell cycle assays in SKMEL-28 cells with CC or GG genotype. Results: Individuals with STAT3 c.*1671TT and c.-1937CC genotypes and TC haplotype of both SNVs were under about 2.0-fold increased risk of CM. Specific JAK1, JAK2, and STAT3 combined genotypes were associated with up to 4.0-fold increased risk of CM. Higher luciferase activity [4,013.34 vs. 2,463.32 arbitrary units (AU); p = 0.004], STAT3 expression by qPCR (649.20 vs. 0.03 AU; p = 0.003) and western blot (1.69 vs. 1.16 AU; p = 0.01), and percentage of cells in the S phase of the cell cycle (57.54 vs. 30.73%; p = 0.04) were more frequent in SKMEL-28 with STAT3 c.-1937CC than with GG genotype. CM cell line with CC genotype presented higher STAT3 protein levels than the one with GG genotype (1.93 versus 1.27 AU, p = 0.0027). Conclusion: Our data present preliminary evidence that inherited abnormalities in the JAK/STAT pathway can be used to identify individuals at a high risk of CM, who deserve additional attention for tumor prevention and early detection.

Unraveling the Complex Interplay of Fis and IHF Through Synthetic Promoter Engineering.

Bacterial promoters are usually formed by multiple cis-regulatory elements recognized by a plethora of transcriptional factors (TFs). From those, global regulators are key elements since these TFs are responsible for the regulation of hundreds of genes in the bacterial genome. For instance, Fis and IHF are global regulators that play a major role in gene expression control in Escherichia coli, and usually, multiple cis-regulatory elements for these proteins are present at target promoters. Here, we investigated the relationship between the architecture of the cis-regulatory elements for Fis and IHF in E. coli. For this, we analyze 42 synthetic promoter variants harboring consensus cis-elements for Fis and IHF at different distances from the core -35/-10 region and in various numbers and combinations. We first demonstrated that although Fis preferentially recognizes its consensus cis-element, it can also recognize, to some extent, the consensus-binding site for IHF, and the same was true for IHF, which was also able to recognize Fis binding sites. However, changing the arrangement of the cis-elements (i.e., the position or number of sites) can completely abolish the non-specific binding of both TFs. More remarkably, we demonstrated that combining cis-elements for both TFs could result in Fis and IHF repressed or activated promoters depending on the final architecture of the promoters in an unpredictable way. Taken together, the data presented here demonstrate how small changes in the architecture of bacterial promoters could result in drastic changes in the final regulatory logic of the system, with important implications for the understanding of natural complex promoters in bacteria and their engineering for novel applications.

A Highly Glucose Tolerant ß-Glucosidase from Malbranchea pulchella (MpBg3) Enables Cellulose Saccharification.

ß-glucosidases catalyze the hydrolysis ß-1,4, ß-1,3 and ß-1,6 glucosidic linkages from non-reducing end of short chain oligosaccharides, alkyl and aryl ß-D-glucosides and disaccharides. They catalyze the rate-limiting reaction in the conversion of cellobiose to glucose in the saccharification of cellulose for second-generation ethanol production, and due to this important role the search for glucose tolerant enzymes is of biochemical and biotechnological importance. In this study we characterize a family 3 glycosyl hydrolase (GH3) ß-glucosidase (Bgl) produced by Malbranchea pulchella (MpBgl3) grown on cellobiose as the sole carbon source. Kinetic characterization revealed that the MpBgl3 was highly tolerant to glucose, which is in contrast to many Bgls that are completely inhibited by glucose. A 3D model of MpBgl3 was generated by molecular modeling and used for the evaluation of structural differences with a Bgl3 that is inhibited by glucose. Taken together, our results provide new clues to understand the glucose tolerance in GH3 ß-glucosidases.

Reverse Engineering of an Aspirin-Responsive Transcriptional Regulator in Escherichia coli.

Bacterial transcription factors (TFs) are key devices for the engineering of complex circuits in many biotechnological applications, yet there are few well-characterized inducer-responsive TFs that could be used in the context of an animal or human host. We have deciphered the inducer recognition mechanism of two AraC/XylS regulators from Pseudomonas putida (BenR and XylS) for creating a novel expression system responsive to acetyl salicylate (i.e., aspirin). Using protein homology modeling and molecular docking with the cognate inducer benzoate and a suite of chemical analogues, we identified the conserved binding pocket of BenR and XylS. By means of site-directed mutagenesis, we identified a single amino acid position required for efficient inducer recognition and transcriptional activation. Whereas this modification in BenR abolishes protein activity, in XylS, it increases the response to several inducers, including acetyl salicylic acid, to levels close to those achieved by the canonical inducer. Moreover, by constructing chimeric proteins with swapped N-terminal domains, we created novel regulators with mixed promoter and inducer recognition profiles. As a result, a collection of engineered TFs was generated with an enhanced response to benzoate, 3-methylbenzoate, 2-methylbenzoate, 4-methylbenzoate, salicylic acid, aspirin, and acetylsalicylic acid molecules for eliciting gene expression in E. coli.

Efficient hydrolysis of wine and grape juice anthocyanins by Malbranchea pulchella ß-glucosidase immobilized on MANAE-agarose and ConA-Sepharose supports.

ß-glucosidases (BGLs) hydrolyze short-chain cellulooligosaccharides. Some BGLs can hydrolyze anthocyanins and be applied in the clarification process of food industries, especially grape juice and wine. Enzyme immobilization is a valuable tool to increase enzyme stabilization. In this work, Malbranchea pulchella BGL was immobilized on Monoaminoethyl-N-ethyl-agarose ionic support, MANAE-agarose, and Concanavalin A-Sepharose affinity support, Con-A-Sepharose. The formed biocatalysts, denominated BLG-MANAE and BLG-ConA, were applied in the grape juice and red wine clarification. BGL-MANAE and BGL-ConA hyperactivated M. pulchella BGL 10- and 3-fold, respectively. Both biocatalysts showed at least 70% activity at pH range 2-11, until 24 h incubation. BGL-MANAE and BGL-ConA showed activity of 60% and 100%, respectively, at 50 °C, up to 24 h. Both biocatalysts were efficiently reused 20-fold. They were stable in the presence of up to 0.1 M glucose for 24 h incubation, and with 5%, 10% and 15% ethanol kept up to 70% activity. BGL-MANAE biocatalyst was 11% and 25% more efficient than BGL-ConA in clarification of concentrate and diluted wines, respectively. Likewise, BGL-MANAE biocatalysts were 14% and 33% more efficient than the BGL-ConA in clarification of diluted and concentrated juices, respectively. Therefore, the BGL-MANAE biocatalyst was especially effective in red wine and grape juice clarification.

The art of vector engineering: towards the construction of next-generation genetic tools.

When recombinant DNA technology was developed more than 40 years ago, no one could have imagined the impact it would have on both society and the scientific community. In the field of genetic engineering, the most important tool developed was the plasmid vector. This technology has been continuously expanding and undergoing adaptations. Here, we provide a detailed view following the evolution of vectors built throughout the years destined to study microorganisms and their peculiarities, including those whose genomes can only be revealed through metagenomics. We remark how synthetic biology became a turning point in designing these genetic tools to create meaningful innovations. We have placed special focus on the tools for engineering bacteria and fungi (both yeast and filamentous fungi) and those available to construct metagenomic libraries. Based on this overview, future goals would include the development of modular vectors bearing standardized parts and orthogonally designed circuits, a task not fully addressed thus far. Finally, we present some challenges that should be overcome to enable the next generation of vector design and ways to address it.

Calibrating Transcriptional Activity Using Constitutive Synthetic Promoters in Mutants for Global Regulators in Escherichia coli.

The engineering of synthetic circuits in cells relies on the use of well-characterized biological parts that would perform predicted functions under the situation considered, and many efforts have been taken to set biological standards that could define the basic features of these parts. However, since most synthetic biology projects usually require a particular cellular chassis and set of growth conditions, defining standards in the field is not a simple task as gene expression measurements could be affected severely by genetic background and culture conditions. In this study, we addressed promoter parameterization in bacteria in different genetic backgrounds and growth conditions. We found that a small set of constitutive promoters of different strengths controlling a short-lived GFP reporter placed in a low-copy number plasmid produces remarkably reproducible results that allow for the calibration of promoter activity over different genetic backgrounds and physiological conditions, thus providing a simple way to set standards of promoter activity in bacteria. Based on these results, we proposed the utilization of synthetic constitutive promoters as tools for calibration for the standardization of biological parts, in a way similar to the use of DNA and protein ladders in molecular biology as references for comparison with samples of interest.

Emergent Properties in Complex Synthetic Bacterial Promoters.

Regulation of gene expression in bacteria results from the interplay between hundreds of transcriptional factors (TFs) at target promoters. However, how the arrangement of binding sites for TFs generates the regulatory logic of promoters is not well-known. Here, we generated and fully characterized a library of synthetic complex promoters for the global regulators, CRP and IHF, in Escherichia coli, which are formed by a weak -35/-10 consensus sequence preceded by four combinatorial binding sites for these two TFs. Using this approach, we found that while cis-elements for CRP preferentially activate promoters when located immediately upstream of the promoter consensus, binding sites for IHF mainly function as "UP" elements and stimulate transcription in several different architectures in the absence of this protein. However, the combination of CRP- and IHF-binding sites resulted in emergent properties in these complex promoters, where the activity of combinatorial promoters cannot be predicted from the individual behavior of its components. Taken together, the results presented here add to the information on architecture-logic of complex promoters in bacteria.