Dual Modification of Cassava Starch Using Physical Treatments for Production of Pickering Stabilizers.

Cassava starch nanoparticles (SNP) were produced using the nanoprecipitation method after modification of starch granules using ultrasound (US) or heat-moisture treatment (HMT). To produce SNP, cassava starches were gelatinized (95 °C/30 min) and precipitated after cooling, using absolute ethanol. SNPs were isolated using centrifugation and lyophilized. The nanoparticles produced from native starch and starches modified using US or HMT, named NSNP, USNP and HSNP, respectively, were characterized in terms of their main physical or functional properties. The SNP showed cluster plate formats, which were smooth for particles produced from native starch (NSNP) and rough for particles from starch modified with US (USNP) or HMT (HSNP), with smaller size ranges presented by HSNP (~63-674 nm) than by USNP (~123-1300 nm) or NSNP (~25-1450 nm). SNP had low surface charge values and a V-type crystalline structure. FTIR and thermal analyses confirmed the reduction of crystallinity. The SNP produced after physical pretreatments (US, HMT) showed an improvement in lipophilicity, with their oil absorption capacity in decreasing order being HSNP > USNP > NSNP, which was confirmed by the significant increase in contact angles from ~68.4° (NSNP) to ~76° (USNP; HSNP). A concentration of SNP higher than 4% may be required to produce stability with 20% oil content. The emulsions produced with HSNP showed stability during the storage (7 days at 20 °C), whereas the emulsions prepared with NSNP exhibited phase separation after preparation. The results suggested that dual physical modifications could be used for the production of starch nanoparticles as stabilizers for Pickering emulsions with stable characteristics.

Cassava Starch Films Containing Quinoa Starch Nanocrystals: Physical and Surface Properties.

Quinoa starch nanocrystals (QSNCs), obtained by acid hydrolysis, were used as a reinforcing filler in cassava starch films. The influence of QSNC concentrations (0, 2.5, 5.0, 7.5 and 10%, w/w) on the film's physical and surface properties was investigated. QSNCs exhibited conical and parallelepiped shapes. An increase of the QSNC concentration, from 0 to 5%, improved the film's tensile strength from 6.5 to 16.5 MPa, but at 7.5%, it decreased to 11.85 MPa. Adequate exfoliation of QSNCs in the starch matrix also decreased the water vapor permeability (~17%) up to a 5% concentration. At 5.0% and 7.5% concentrations, the films increased in roughness, water contact angle, and opacity, whereas the brightness decreased. Furthermore, at these concentrations, the film's hydrophilic nature changed (water contact angle values of >65°). The SNC addition increased the film opacity without causing major changes in color. Other film properties, such as thickness, moisture content and solubility, were not affected by the QSNC concentration. The DSC (differential scanning calorimetry) results indicated that greater QSNC concentrations increased the second glass transition temperature (related to the biopolymer-rich phase) and the melting enthalpy. However, the film's thermal stability was not altered by the QSNC addition. These findings contribute to overcoming the starch-based films' limitations through the development of nanocomposite materials for future food packaging applications.

Production of a rich-carotenoid colorant from pumpkin peels using oil-in-water emulsion followed by spray drying.

Peels and seeds are byproducts generated during the processing of fruits and vegetables that have been cut off or rejected in the food industry. Pumpkin peels are an example of products that provide valuable nutritional aspects but that have low commercial value. This work aimed at recovering carotenoids from pumpkin peels to produce valuable powders. The pumpkin peel flour was obtained from convective drying and milling processes. Liquid-solid extraction produced the ethanol raw extract with a high carotenoid content. Carotenoid extract and Arabic gum suspensions were mixed in proportions of 1:2, 1:3, or 1:4 w/w. Emulsions produced via Ultra-Turrax (UT) and Ultra-Turrax plus high pressure (UTHP) were evaluated and spray dried. The particles carotenoid concentrations varied from 159.1 to 304.6 µg/g and from 104.3 to 346.2 µg/g for samples primarily produced via UT and UTHP, respectively. UTHP 1:3 particles showed the lowest degradation of carotenoids during 90 days of storage, with a retention index of 79%. The homogenization and spray drying techniques were proven to be suitable steps to preserve the carotenoids recovered from the byproduct studied. Microparticles can be used as a natural dye with potential use in food, pharmaceuticals, and cosmetics.

Development of natural pigments microencapsulated in waste yeast Saccharomyces cerevisiae using spray drying technology and their application in yogurt.

Although Saccharomyces cerevisiae has shown potential utilization as a bio-vehicle for encapsulation, there are no reports about the functionality of natural colorants encapsulated using yeast cells. The main objectives of this study were to produce natural food coloring by encapsulating extracts from grape pomace (GP) and jabuticaba byproducts (JB) in brewery waste yeast and evaluate the functionality of the pigments by their incorporation into yogurts. Particles produced by the encapsulation of extracts from GP and JB in S. cerevisiae using 5% of yeast had the highest encapsulation efficiencies for both anthocyanins (11.1 and 47.3%) and phenolic compounds (67.5 and 63.6%), the highest concentration of both bioactives during storage and stable luminosity. Yogurts showed a pseudoplastic behavior and were considered weak gels. Colored yogurts had acceptance indexes between 73.9 and 81.4%. This work evidenced the utilization of enriched yeasts as coloring agents and interesting additives for the production of functional foods.

Reducing carotenoid loss during storage by co-encapsulation of pequi and buriti oils in oil-in-water emulsions followed by freeze-drying: Use of heated and unheated whey protein isolates as emulsifiers.

Buriti and pequi oils are rich in carotenoids and beneficial to human health; however, carotenoid oxidation during storage causes color loss in foods, making it difficult to use these oils in food products. This research aimed to encapsulate pequi oil and co-encapsulate pequi and buriti oils by emulsification using whey protein isolate (WPI) as an emulsifier in two forms, natural (unheated) and heated, followed by freeze-drying. The emulsions were studied by droplet size under different stress conditions, instability index, and rheology. The freeze-dried (FD) samples were studied after accelerated oxidation and the total carotenoid retention was determined; for the reconstituted FD, the zeta potential and droplet size were recorded after storage at 37 °C for 30 days. The emulsions were stable in all conditions, with average droplet sizes between 0.88 ± 0.03 and 2.33 ± 0.02 µm, and formulations with heated WPI presented the lowest instability index values. The FD's zeta potential values ranged from -50 ± 3 to -32 ± 3 mV. The co-encapsulated oils presented higher carotenoid retention (50 ± 1 and 48 ± 1%) than the free oils (31 ± 2%) after 30 days. The oxidative stability indexes were 51 ± 4 and 46 ± 3 for the co-encapsulated oils with unheated and heated WPI, respectively, and 20.5 ± 0.1 h for the free oils. FD formulations with 1:3 ratio of oil: aqueous phase and heated or unheated WPI showed the best carotenoid retention and oxidative stability, indicating that FD oil emulsions have potential as next-generation bioactive compound carriers.

Quinoa starch nanocrystals production by acid hydrolysis: Kinetics and properties.

Quinoa starch (QS) acid hydrolysis was investigated, focusing on the kinetics and physicochemical properties of nanocrystals production as a function of temperature (30, 35 and 40 °C). Waxy maize starch (WMS) was hydrolyzed at 40 °C for comparison. QS presented different hydrolysis percentages at 30 °C (63%), 35 °C (73%) and 40 °C (91%), on the fifth day. QS showed faster hydrolysis (first-order rate constant, k = 0.59 day-1) than WMS (k = 0.39 day-1) at 40 °C. Material produced at 30 °C was micrometric-sized and irregularly-shaped while that at 35 and 40 °C, was nanometric-sized and conical and parallelepiped-shaped. The hydrolysis temperature increase did not affect the crystallinity index of quinoa starch nanocrystals (QSNC), whereas zeta potential and Fourier transform infrared spectroscopy band intensities increased, and thermal transition peak temperature and thermal stability decreased when hydrolysis temperature increased. QSNC were produced at 35 and 40 °C with yields of 22.8% and 6.8%, respectively. At 40 °C, QSNC presented smaller sizes than WMS nanocrystals, but also lower yield and crystallinity index.

Sugarcane Juice with Co-encapsulated Bifidobacterium animalis subsp. lactis BLC1 and Proanthocyanidin-Rich Cinnamon Extract.

Bioactive compounds are sensitive to many factors, and they can alter the sensory characteristics of foods. Microencapsulation could be a tool to provide protection and allow the addition of bioactives in new matrices, such as sugarcane juice. This study focused on producing and evaluating the potential function of probiotics and proanthocyanidin-rich cinnamon extract (PRCE), both in free and encapsulated forms when added to sugarcane juice. The pure sugarcane juice treatment T1 was compared with other sugarcane juices to which bioactive compounds had been added; T2, a non-encapsulated Bifidobacterium animalis subsp. lactis (BLC1); T3, a non-encapsulated BLC1 and PRCE; T4, BLC1 microcapsules; and T5, with BLC1 and PRCE microcapsules. The samples were morphologically, physicochemically, rheologically, and sensorially characterized. Samples were also evaluated regarding the viability of BLC1 during the juice's storage at 4 °C. It was possible to produce probiotic sugarcane juice with non-encapsulated BLC1, but not with the addition of free PRCE, which in its free form reduced the viability of this microorganism to < 1 log CFU/mL after 7 days. The microcapsules were effective to protect BLC1 during juice storage and to maintain high contents of phenolic and proanthocyanidin compounds, although the products containing these had their viscosity altered and were less accepted than either the control or those with non-encapsulated BLC1.

Characterization and optimization of oil microcapsules from Attalea phalerata Mart. for the preservation of bioactive compounds

This study aimed microencapsulating Attalea phalerata Mart. oil, containing high carotenoid and phenolic compounds content, with Arabic gum and gelatin, using the complex coacervation method. The yield, efficiency, morphology of microcapsules and content of phenolic compounds, carotenoids and antioxidant activity in different processes conditions (concentration of the filling, temperature and agitation speed) were evaluated. The results showed 88% of yield, efficiency up to 70% and a characteristic size of microcapsules. The amount of carotenoids was high in crude oil (394.84 µg of carotenoids/g oil) and the microencapsulation tests showed amounts of 19.19 to 166.40 µg of carotenoids/g oil. The phenolic compounds in the crude oil were 20.73 mg GAE/g sample and the microencapsulation tests showed amounts of 3.17 to 15.16 mg GAE/g oil. The values of bioactive compounds influenced in the antioxidant activity though ABTS•+ method with values of 161.70 µM trolox/g oil to crude oil and 7.70 and 159.54 µM trolox/g oil for microcapsules tests.

The Chemical Composition and Metabolic Effects of Attalea phalerata Nut Oil in Hyperlipidemic Rats Induced by a High-Fructose Diet.

The fatty acids found in nuts are important regulators of the metabolism. These acids are frequently associated with a reduction of serum cholesterol and body fat and a lower risk of developing cardiovascular disease. In this context, the aim of this study was to identify and quantify the nut oil fatty acids from Attalea phalerata and investigate their metabolic effects in rats with hyperlipidemia induced by a diet rich in fructose. Oleic and lauric acids were the major compounds found in the A. phalerata nut oil (APNO). Hyperlipidemic rats treated with APNO showed a reduction in the total serum cholesterol similar to those treated with simvastatin, an increased body temperature by 1 °C, and a reduction in the body weight gain and mesenteric depot of white adipose tissue compared to the hyperlipidemic controls rats. There was an increase in the relative liver weight of rats treated with APNO, without, however, any change in the serum markers of hepatic toxicity. In addition, there was an increase in the moisture and lipid content of the feces of the rats treated with APNO compared to the controls. Together, these results suggest that APNO has potential use in health foods and nutritional supplements to control hypercholesterolemia and obesity.

Development of functional yogurt containing free and encapsulated echium oil, phytosterol and sinapic acid.

The consumption of omega-3 fatty acids and phytosterol promotes the reduction of cholesterol and triacylglycerol levels. However, such compounds are susceptible to oxidation, which hampers their application. The objective of this work was to coencapsulate echium oil, phytosterols and sinapic acid (crosslinker/antioxidant), and incorporate the obtained microcapsules into yogurt. The microcapsules were evaluated for particle size, accelerated oxidation by Rancimat, and simulation of gastric/intestinal release. The yogurts were assessed for morphology, pH, titratable acidity, color, rheology and sensory analysis. The microcapsules (13-42µm) promoted protection against oil oxidation (induction time of 54.96h). The yogurt containing microcapsules, presented a pH range from 3.89 to 4.17 and titratable acidity range from 0.798 to 0.826%, with good sensorial acceptance. It was possible to apply the microcapsules in yogurt, without compromising the rheological properties and physicochemical stability of the product.

Effect of different polysaccharides and crosslinkers on echium oil microcapsules.

Microencapsulation by complex coacervation using gelatin and arabic gum (AG) as wall materials and transglutaminase for crosslinking is commonly used. However, AG is only produced in a few countries and transglutaminase is expensive. This work aimed to evaluate the encapsulation of echium oil by complex coacervation using gelatin and cashew gum (CG) as wall materials and sinapic acid (S) as crosslinker. Treatments were analyzed in relation to morphology, particle size, circularity, accelerated oxidation and submitted to different stress conditions. Rounded microcapsules were obtained for treatments with AG (45.45µm) and microcapsules of undefined format were obtained for treatments with CG (22.06µm). The S incorporation for 12h improved the oil stability by three fold compared to oil encapsulated without crosslinkers. Treatments with CG and S were resistant to different stress conditions similar to treatments with AG and transglutaminase, making this an alternative for delivery/application of compounds in food products.

Influence of osmotic dehydration on ascorbic acid loss in pickled dry peppers (Capsicum chinense)

The objective of this work was (1) to develop a dehydrated pepper with 45% humidity, determining the drying curves for pepper, with and without osmotic pre-treatment and (2) to evaluate the influence of both drying and osmotic treatment on the content ascorbic acid (vitamin C) in fresh pepper and pepper with 45% humidity. The experiments were carried out using the peppers cut in half, with and without osmotic pre-treatment, followed by drying in an oven at 70 ºC. The results showed that the osmotic pretreatment did not influence the retention of ascorbic acid during the drying of pepper. The sensory analysis regarding the color, flavor, and texture attributes revealed that there was no difference in the acceptability.