ABSTRACT
Oral suspension is the most preferred dosage form for the paediatric population because of the difficulties related to solid medications, such as the swallowing limitations, bitter taste, and poor oral bioavailability, which can cause serious impairment to attain a successful treatment. Given the importance of successful therapies, there is a need for safe and effective commercially-available paediatric oral suspension and their characterization. For the latter, it is important to identify safe excipients and preservatives. The paediatric group is a diverse category which includes infants and teenagers, with major pharmacokinetics and pharmacodynamics differences, mainly because of physiological and behavioral variations. Therefore, finding a single formulation for paediatric population remains a challenge, as well asthe formulation of stable-in-time suspension. In addition, drug's dissolving characteristic and permeation, are the main determinants for oral absorption, which are closely related to drug release kinetics from the pharmaceutical form. In this context, drug release profile is an important and limiting step in oral bioavailability, particularly for BCS class II drugs; thus, it is possible to increase bioavailability and minimize adverse effects by changing the release rate of such drugs. This review covers all the aspects for paediatric oral suspension development, and analyses the considerations for excipients selection as a crucial task for effectively choosing a safe and effective pharmaceutical form and correctly dosing paediatric patients.
Subject(s)
Biological Availability , Excipients , Suspensions , Humans , Administration, Oral , Child , Excipients/chemistry , Drug Compounding/methods , Adolescent , Drug Liberation , Chemistry, Pharmaceutical/methods , Infant , Pharmaceutical Preparations/administration & dosage , Pharmaceutical Preparations/chemistryABSTRACT
Aim: This work aimed to synthesize magnesium-doped zinc oxide, silver and gold nanoparticles (Nps) and to evaluate their potential to prevent and eradicate Escherichia coli, Proteus mirabilis, Staphylococcus aureus, Acinetobacter baumannii and Pseudomonas aeruginosa biofilms. Materials & methods: The Nps were synthesized by precipitation and metallic reduction techniques. Physicochemical and biological characterization of Nps was performed. Results: All the Nps tested were able to inhibit the formation of E. coli, P. mirabilis, S. aureus and A. baumannii biofilms. The effects on the eradication of preformed biofilms were variable, although all the Nps tested were able to eradicate A. baumannii biofilms. Conclusion: The observed effects make the Nps suitable for coating surfaces and/or antibiotic carriers with medical interest.
Subject(s)
Metal Nanoparticles , Zinc Oxide , Gold/pharmacology , Zinc Oxide/pharmacology , Zinc Oxide/chemistry , Magnesium/pharmacology , Silver/pharmacology , Silver/chemistry , Zinc/pharmacology , Metal Nanoparticles/chemistry , Staphylococcus aureus , Magnesium Oxide/pharmacology , Escherichia coli , Biofilms , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistryABSTRACT
Buccal delivery of small and large molecules is an attractive route of administration that has been studied extensively over the past few decades. This route bypasses first-pass metabolism and can be used to deliver therapeutics directly to systemic circulation. Moreover, buccal films are efficient dosage forms for drug delivery due to their simplicity, portability, and patient comfort. Films have traditionally been formulated using conventional techniques, including hot-melt extrusion and solvent casting. However, newer methods are now being exploited to improve the delivery of small molecules and biologics. This review discusses recent advances in buccal film manufacturing, using the latest technologies, such as 2D and 3D printing, electrospraying, and electrospinning. This review also focuses on the excipients used in the preparation of these films, with emphasis on mucoadhesive polymers and plasticizers. Along with advances in manufacturing technology, newer analytical tools have also been used for the assessment of permeation of the active agents across the buccal mucosa, the most critical biological barrier and limiting factor of this route. Additionally, preclinical and clinical trial challenges are discussed, and some small molecule products already on the market are explored.
Subject(s)
Biological Products , Nanoparticles , Humans , Polymers , Administration, Buccal , Drug Delivery Systems/methods , Mouth Mucosa/metabolismABSTRACT
The objective of this study was to develop clarithromycin-loaded lipid nanocarriers and incorporate them into microcapsules for pH-specific localized release of clarithromycin in the Helicobacter pylori microenvironment in order to obtain a gastro-retentive and pH-sensitive formulation. A Plackett-Burman design was applied to identify the effect of 5 factors on 3 responses. Then, a central composite design was applied to estimate the most important factors leading to the best compromise between lower particle size, polydispersity index and particle size changes. The optimized clarithromycin-loaded nanocapsules were employed to generate microcapsules by different methodologies. Nanocarriers and microcapsules were characterized in vitro. Experimental design and conditions were optimized to obtain nanocapsules of around 100 nm by a modified phase inversion-based process. High particle size homogeneity and high stability were achieved. At 4 °C both optimized lipid nanocapsules were stable during at least 365 days, confirming stability under those conditions. Clarithromycin incorporation in the nanocarrier was effective. Both types of microcoating were evaluated regarding their pH sensitivity. Spray drying microcapsules exhibited similar and uncontrolled release profiles at pH 2 and 7.4. Alternatively, when microcoatings were generated using an Encapsulator, release was insignificant at pH 2, while at pH 7.4 release was triggered, and appeared more appropriate to formulate microcapsules that release nanocarriers under pH neutral Helicobacter pylori microenvironment conditions, thereby permitting effective drug delivery in infected locations. The release of clarithromycin from lipid nanocarrier loaded microcapsules was pH-sensitive suggesting that this could be an effective strategy for clarithromycin delivery to the Helicobacter pylori microenvironment. Clarithromycin nanocapsules with and without microcoating showed a high anti-Helicobacter pylori activity in vitro.
Subject(s)
Helicobacter Infections , Helicobacter pylori , Nanocapsules , Anti-Bacterial Agents/chemistry , Capsules , Clarithromycin/chemistry , Clarithromycin/pharmacology , Drug Delivery Systems , Helicobacter Infections/drug therapy , Humans , Lipids/pharmacology , Research DesignABSTRACT
Currently, most vaccines available on the market are for parental use; however, this may not be the best option on several occasions. Mucosal routes of administration such as intranasal, sublingual, and buccal generate great interest due to the benefits they offer. These range from increasing patient compliance to inducing a more effective immune response than that achieved through conventional routes. Due to the activation of the common mucosal immune system, it is possible to generate an effective systemic and local immune response, which is not achieved through parenteral administration. Protection against pathogens that use mucosal entry routes is provided by an effective induction of mucosal immunity. Mucosal delivery systems are being developed, such as films and microneedles, which have proven to be effective, safe, and easy to administer. These systems have multiple advantages over commonly used injections, which are simple to manufacture, stable at room temperature, painless for the patient since they do not require puncture. Therefore, these delivery systems do not require to be administered by medical personnel; in fact, they could be self-administered.
ABSTRACT
Ang-(1-9) peptide is a bioactive vasodilator peptide that prevents cardiomyocyte hypertrophy in vitro and in vivo as well as lowers blood pressure and pathological cardiovascular remodeling; however, it has a reduced half-life in circulation, requiring a suitable carrier for its delivery. In this work, hybrid nanoparticles composed of polymeric nanoparticles (pNPs) based on Eudragit® E/Alginate (EE/Alg), and gold nanospheres (AuNS), were developed to evaluate their encapsulation capacity and release of Ang-(1-9) under different experimental conditions. Hybrid pNPs were characterized by dynamic light scattering, zeta potential, transmission and scanning electron microscopy, size distribution, and concentration by nanoparticle tracking analysis. Nanometric pNPs, with good polydispersity index and colloidally stable, produced high association efficiency of Ang-(1-9) and controlled release. Finally, the treatment of neonatal cardiomyocytes in culture with EE/Alg/AuNS 2% + Ang-(1-9) 20% pNPs decreased the area and perimeter, demonstrating efficacy in preventing norepinephrine-induced cardiomyocyte hypertrophy. On the other hand, the incorporation of AuNS did not cause negative effects either on the cytotoxicity or on the association capacity of Ang-(1-9), suggesting that the hybrid carrier EE/Alg/AuNS pNPs could be used for the delivery of Ang-(1-9) in the treatment of cardiovascular hypertrophy.
ABSTRACT
Urinary tract infection (UTI) is one of the most common reasons for antibiotic treatment. Nevertheless, uropathogens are steadily becoming resistant to currently available therapies. In this context, nanotechnology emerges as an innovative and promising approach among diverse strategies currently under development. In this review we deeply discuss different nanoparticles (NPs) used in UTI treatment, including organic NPs, nanodiamonds, chemical and green synthesized inorganic NPs, and NPs made of composite materials. In addition, we compare the effects of different NPs against uropathogens in vivo and in vitro and discuss their potential impact the in the near future.
Subject(s)
Nanoparticles , Urinary Tract Infections , Anti-Bacterial Agents , HumansABSTRACT
In this work, we used the artificial intelligence tool known as neurofuzzy logic (NFL) for fabricating uniform nanoparticles of polycaprolactone by the nanoprecipitation method with a focus on stabilizer selection. The adaptability of NFL assisted the decision-making on different manufacturing and formulation conditions. The nanoprecipitation method can be summarized as mixing a poorly water-soluble polymer solution with water and its consequent precipitation. Although nanoprecipitation seems simple, the process is highly variable to even slight modifications, leading to polydispersity and nanoparticle aggregation. Here, the NFL model established relationships between mixing conditions, different stabilizers and solvents, among other parameters. Seven parameters measured by dynamic light scattering and laser doppler electrophoresis were modelized with high predictability using NFL tool, as a function of the raw materials and operation conditions. The model allowed the principal component analysis to be carried out, showing that the selection of a stabilizer is the most critical parameter for avoiding nanoparticle aggregation. Then, inputs related to fluid dynamics were relevant to tune the characteristics of the stabilized nanoparticles even further. NFL model showed great potential to support pharmaceutical research by finding subtle relationships between several variables, even from incomplete or fragmented data, which is common in pharmaceutical development.
Subject(s)
Fuzzy Logic , Nanoparticles , Artificial Intelligence , PolyestersABSTRACT
Lipid nanocarriers have a great potential for improving the physicochemical characteristics and behavior of poorly water-soluble drugs, such as aqueous dispersibility and oral bioavailability. This investigation presents a novel nanostructured lipid carrier (NLC) based on a mixture of solid lipid glycerides, fatty acid esters of PEG 1500 (Gelucire® 44/14), and an oil mix composed of capric and caprylic triglycerides (Miglyol® 812). These NLCs were developed by a simple low-energy method based on melt emulsification to yield highly encapsulating and narrowly distributed nanoparticles (~100 nm, PdI = 0.1, and zeta potential = ~-10 mV). Rhodamine 123 was selected as a poorly water-soluble drug model and owing to its spectroscopic properties. The novel NLCs were characterized by dynamic light scattering (DLS), zeta potential, nanoparticle tracking analysis (NTA), transmission electron microscopy (TEM), differential scanning calorimetry (DSC), and colloidal stability. The drug release was determined through a dialysis bag and vertical Franzs' cells to provide insights about the methods' suitability, revealing similar performance regardless of their different fluid dynamics. Rhodamine 123 followed a characteristic biphasic release profile owing to the swelling of the hydrophilic polymer coating and diffusion process from the lipid core as revealed by the Korsmeyers-Peppas kinetic modeling. Moreover, to elucidate the formation and incorporation of Rhodamine 123 into the NLC core, several molecular dynamics simulations were conducted. The temperature was shown to be an important condition to improve the formation of the nanoparticles. In addition, the liquid lipid incorporation to the formulation forms nanoparticles with imperfect centers, in contrast to nanoparticles without it. Moreover, Miglyol® 812 improves hydrophobic molecule solubility. These results suggest the potential of novel NLC as a drug delivery system for poorly water-soluble drugs.
ABSTRACT
During the last decades, inkjet printing has emerged as a novel technology and attracted the attention of the pharmaceutical industry, as a potential method for manufacturing personalized and customizable dosage forms to deliver drugs. Commonly, the desired drug is dissolved or dispersed within the ink and then dispensed in various dosage forms. Using this approach, several studies have been conducted to load hydrophilic or poorly water-soluble small molecules onto the surface of different solid substrates, including films, tablets, microneedles, and smart data-enriched edible pharmaceuticals, using two-dimensional and three-dimensional inkjet printing methods, with high dose accuracy and reproducibility. Furthermore, biological drugs, such as peptides, proteins, growth factors, and plasmids, have also been evaluated with positive results, eliciting the expected biological response; nonetheless, minor changes in the structure of these compounds with significant impaired activity cannot be dismissed. Another strategy using inkjet printing is to disperse drug-loaded nanoscale particles in the ink liquid, such as nanosuspension, nanocomplexes, or nanoparticles, which have been explored with promising results. Although these favorable outcomes, the proper selection of ink constituents and the inkjet printer, the correlation of printing cycles and effectively printed doses, the stability studies of drugs within the ink and the optimal analysis of samples before and after the printing process are the main challenges for inkjet printing, and therefore, this review analyzes these aspects to assess the body of current literature and help to guide future investigations on this field.
Subject(s)
Biological Products , Nanoparticles , Printing, Three-Dimensional , Reproducibility of Results , TabletsABSTRACT
Loperamide is a µ-opioid agonist with poor gastrointestinal absorption, mainly because of its modest aqueous solubility and being a P-glycoprotein (Pgp) efflux substrate. Nevertheless, studies associated with therapeutic effects strongly suggest that loperamide holds potential pharmacological advantages over traditional µ-opioid agonists commonly used for analgesia. Thus, in this Communication, we assessed in MDCK-hMDR1 cell lines the effects over loperamide uptake and efflux ratio, when loaded into Eudragit RS (ERS) nanocarriers coated with poloxamer 188 (P188). ERS was chosen for enhancing loperamide aqueous dispersibility and P188 as a potential negative Pgp modulator. In uptake assays, it was observed that Pgp limited the accumulation of loperamide into cells and that preincubation with P188, but not coincubation, led to increasing loperamide uptake at a similar extent of Pgp pharmacological inhibition. On the other hand, the efflux ratio displayed no alterations when Pgp was pharmacologically inhibited, whereas ERS/P188 nanocarriers effectively enhanced loperamide uptake and absorptive transepithelial transport. The latter suggests that loperamide transport across cells is significantly influenced by the presence of the unstirred water layer (UWL), which could hinder the visualization of Pgp-efflux effects during transport assays. Thus, results in this work highlight that formulating loperamide into this nanocarrier enhances its uptake and transport permeability.
Subject(s)
Antidiarrheals/administration & dosage , Drug Carriers/chemistry , Loperamide/administration & dosage , ATP Binding Cassette Transporter, Subfamily B/genetics , ATP Binding Cassette Transporter, Subfamily B/metabolism , Acrylic Resins/chemistry , Administration, Oral , Animals , Antidiarrheals/pharmacokinetics , Biological Availability , Dogs , Humans , Intestinal Absorption , Intestinal Mucosa/metabolism , Loperamide/pharmacokinetics , Madin Darby Canine Kidney Cells , Methacrylates/chemistry , Nanoparticles/chemistry , Permeability , Poloxamer/chemistry , Recombinant Proteins/genetics , Recombinant Proteins/metabolism , SolubilityABSTRACT
The aim of the study was to develop a novel buccal dosage form to transport rhodamine 123 and human insulin as models for poorly water-soluble and biological drugs, using lipid-core micelles (LCMs)-loaded mucoadhesive films. LCMs were synthesized by a low-energy hot emulsification process, yielding spherically shaped, small-sized, monodispersed and negatively charged carriers with high entrapment efficiency. In vitro release studies demonstrated a higher release of insulin rather than rhodamine from LCMs in simulated physiological conditions, due to an initial burst release effect; however, both release profiles are mainly explained by a diffusion mechanism. Furthermore, LCMs-loaded mucoadhesive films were manufactured and preserved with similar mechanical properties and optimal mucoadhesive behavior compared to nonloaded films. Ex vivo permeation experiments using excised porcine buccal epithelium reveal that both rhodamine and insulin-loaded LCM films elicited a significantly enhanced permeation effect compared to LCMs in suspension and free drugs in solution as controls. Hence, LCMs-loaded mucoadhesive films are suitable as buccal dosage form for the transport and delivery of rhodamine 123 and insulin, as models for poorly water-soluble and biological drugs, respectively.
ABSTRACT
Dermatophyte fungal infections are difficult to treat because they need long-term treatments. 4-Nerolidylcatechol (4-NC) is a compound found in Piper umbellatum that has been reported to demonstrate significant antifungal activity, but is easily oxidizable. Due to this characteristic, the incorporation in nanostructured systems represents a strategy to guarantee the compound's stability compared to the isolated form and the possibility of improving antifungal activity. The objective of this study was to incorporate 4-NC into polymeric nanoparticles to evaluate, in vitro and in vivo, the growth inhibition of Microsporum canis. 4-NC was isolated from fresh leaves of P. umbellatum, and polymer nanoparticles of polycaprolactone were developed by nanoprecipitation using a 1:5 weight ratio (drug:polymer). Nanoparticles exhibited excellent encapsulation efficiency, and the antifungal activity was observed in nanoparticles with 4-NC incorporated. Polymeric nanoparticles can be a strategy employed for decreased cytotoxicity, increasing the stability and solubility of substances, as well as improving the efficacy of 4-NC.
ABSTRACT
Angiotensin-(1-9), a component of the non-canonical renin-angiotensin system, has a short half-life in blood. This peptide has shown to prevent and/or attenuate hypertension and cardiovascular remodeling. A controlled release of angiotensin-(1-9) is needed for its delivery to the heart. Our aim was to develop a drug delivery system for angiotensin-(1-9). Thermosensitive liposomes (LipoTherm) were prepared with gold nanoclusters (LipoTherm-AuNC) to increase the stability and reach a temporal and spatial control of angiotensin-(1-9) release. Encapsulation efficiencies of nearly 50% were achieved in LipoTherm, reaching a total angiotensin-(1-9) loading of around 180 µM. This angiotensin-(1-9)-loaded LipoTherm sized around 100 nm and exhibited a phase transition temperature of 43 °C. AuNC were grown on LipoTherm and the new hybrid nanosystem showed energy absorption in the near-infrared (NIR) wavelength range. By NIR laser irradiation, a controlled release of angiotensin-(1-9) was achieved from the LipoTherm-AuNC nanosystem. These nanosystems did not show any cytotoxic effect on cultured cardiomyocytes. Biological activity of angiotensin-(1-9) released from the LipoTherm-AuNC-based nanosystem was confirmed using an ex vivo Langendorff heart model.
Subject(s)
Gold , Liposomes , Angiotensin I , Doxorubicin , Drug Delivery SystemsABSTRACT
New therapeutics such as antisense oligonucleotides, small interfering RNA and peptide-drug conjugates are taking great relevance in the pharmaceutical industry due to their specificity of action and their improved safety profile. However, they could present bioavailability issues due to their hydrophilic nature, such as BCS class III drugs. Therefore, the formation of ion pairs of these type of molecules allows modifying their physicochemical characteristics such as polarity and lipophilicity leading to improved permeability. By carrying out a tailored synthesis, it is possible to obtain complexes with greater stability and better performance in vitro and in vivo, where their correlation with physicochemical properties continues to be a growing field of research. Moreover, ionic liquids (IL), which are substances that melt below 100 °C, have enabled modifying various drug properties, showing promising results in vitro-in vivo, especially when they are included in suitable drug delivery systems, such as nanoparticles, microparticles, self-emulsifying drug delivery systems, and transdermal patches, among others. The drug-IL is formed from the therapeutic agent and a counterion, mainly by ionic interactions, and resulting in a wide variety of derivatives with different properties. However, the pharmaceutical field is limited to the use of some excipients or GRAS (generally recognized as safe) substances, so the search for new counterions is of great interest. In this article, we have compiled key indexes that can be obtained from databases to guide the search for suitable counterions, together with different drug delivery system strategies to choose the most appropriate formulation according to the non-parenteral route of administration selected. Intellectual property advancements in the field are also presented and analyzed.
Subject(s)
Drug Carriers/administration & dosage , Drug Carriers/metabolism , Drug Compounding/methods , Drug Delivery Systems/methods , Ionic Liquids/administration & dosage , Ionic Liquids/metabolism , Animals , Drug Administration Routes , Drug Carriers/chemical synthesis , Humans , Hydrophobic and Hydrophilic Interactions/drug effects , Ionic Liquids/chemical synthesis , Permeability/drug effectsABSTRACT
Dermatophyte fungal infections are difficult to treat because they need long-term treatments. 4-Nerolidylcatechol (4-NC) is a compound found in Piper umbellatum that has been reported to demonstrate significant antifungal activity, but is easily oxidizable. Due to this characteristic, the incorporation in nanostructured systems represents a strategy to guarantee the compound's stability compared to the isolated form and the possibility of improving antifungal activity. The objective of this study was to incorporate 4-NC into polymeric nanoparticles to evaluate, in vitro and in vivo, the growth inhibition of Microsporum canis. 4-NC was isolated from fresh leaves of P. Umbellatum, and polymer nanoparticles of polycaprolactone were developed by nanoprecipitation using a 1:5 weight ratio (drug:polymer). Nanoparticles exhibited excellent encapsulation efficiency, and the antifungal activity was observed in nanoparticles with 4-NC incorporated. Polymeric nanoparticles can be a strategy employed for decreased cytotoxicity, increasing the stability and solubility of substances, as well as improving the efficacy of 4-NC(AU).
Subject(s)
Nanoparticles/therapeutic use , Microsporum/growth & development , Antifungal AgentsABSTRACT
The number of biologic drugs has increased in the pharmaceutical industry due to their high therapeutic efficacy and selectivity. As such, safe and biocompatible delivery systems to improve their stability and efficacy are needed. Here, we developed novel cationic polymethacrylate-alginate (EE-alginate) pNPs for the biologic drug model lysozyme (Lys). The impact of variables such as total charge and charge ratios over nanoparticle physicochemical properties as well as their influence over in vitro safety (viability/proliferation and cell morphology) on HeLa cells was investigated. Our results showed that electrostatic interactions between the EE-alginate and lysozyme led to the formation of EE/alginate Lys pNPs with reproducible size, high stability due to their controllable zeta potential, a high association efficiency, and an in vitro sustained Lys release. Selected formulations remained stable for up to one month and Fourier transform-Infrared (FT-IR) showed that the functional groups of different polymers remain identifiable in combined systems, suggesting that Lys secondary structure is retained after pNP synthesis. EE-alginate Lys pNPs at low concentrations are biocompatible, while at high concentrations, they show cytotoxic for HeLa cells, and this effect was found to be dose-dependent. This study highlights the potential of the EE-alginate, a novel polyelectrolyte complex nanoparticle, as an effective and viable nanocarrier for future drug delivery applications.
ABSTRACT
Cardiovascular diseases are the leading cause of death worldwide. Despite preventive efforts, early detection of atherosclerosis, the common pathophysiological mechanism underlying cardiovascular diseases remains elusive, and overt coronary artery disease or myocardial infarction is often the first clinical manifestation. Nanoparticles represent a novel strategy for prevention, diagnosis, and treatment of atherosclerosis, and new multifunctional nanoparticles with combined diagnostic and therapeutic capacities hold the promise for theranostic approaches to this disease. This review focuses on the development of nanosystems for therapy and diagnosis of subclinical atherosclerosis, coronary artery disease, and myocardial infarction and the evolution of nanosystems as theranostic tools. We also discuss the use of nanoparticles in noninvasive imaging, targeted drug delivery, photothermal therapies together with the challenges faced by nanosystems during clinical translation.
Subject(s)
Atherosclerosis/diagnostic imaging , Atherosclerosis/therapy , Myocardial Infarction/diagnostic imaging , Myocardial Infarction/therapy , Nanoparticles/administration & dosage , Theranostic Nanomedicine/methods , Animals , Humans , Molecular Imaging/methods , Molecular Imaging/trends , Molecular Targeted Therapy/methods , Molecular Targeted Therapy/trends , Theranostic Nanomedicine/trendsABSTRACT
Oral bioavailability of loperamide is restricted by its limited absorption in the gastrointestinal tract due to its poor aqueous solubility and its P-glycoprotein (Pgp) substrate characteristic. In addition, ammonium methacrylate copolymers have shown to have mucoadhesive properties, whereas poloxamer 188, has been suggested as a Pgp inhibitor. Thus, in this work, we evaluate conditions that affect physicochemical parameters of ammonium methacrylate/poloxamer 188-based nanocarriers loaded with loperamide hydrochloride. Nanocarriers were synthesized by nanoprecipitation, enhancing loperamide encapsulation efficiency by modifying the aqueous phase to basic pH. The isolation of the non-encapsulated drug fraction from the nanocarriers-incorporated fraction was conducted by centrifugation, ultrafiltration, vacuum filtration and diafiltration. The last method was effective in providing a deeper understanding of drug-nanocarrier loading and interactions by means of modeling the data obtained by it. Through diafiltration, it was determined an encapsulation efficiency of about 93%, from which a 38% ±6 was shown to be reversibly (thermodynamic interaction) and a 62% ±6 irreversibly (kinetic interaction) bound. Finally, release profiles were assessed through empirical and semi-empirical modeling, showing a biphasic release behavior (burst effect 11.34% and total release at 6â¯hâ¯=â¯33% ±1). Thus, encapsulation efficiency and release profile were shown to have a strong mathematical modeling-based correlation, providing the mechanistic approach presented in this article a solid support for future translational investigations.