ABSTRACT
Finding green energy resources that contribute to the battle against global warming and the pollution of our planet is an urgent challenge. Thermoelectric electricity production is a clean and efficient method of producing energy; consequently, scientists are currently researching and creating thermoelectric materials to increase the efficiency of thermoelectric electricity production and expand the potential of the thermoelectric effect for clean energy production. This work focuses on a comprehensive study of the thermoelectric properties of two-dimensional ScYCBr2. We report here a computational analysis of this Janus-like MXene, which is predicted to exhibit outstanding thermoelectric properties. The study uses density-functional theory to provide evidence of the important role played by symmetry breaking to promote low-thermal transport by favoring certain phonon scattering channels. Compared to its symmetric parent compounds, the asymmetric Janus-type ScYCBr2 displays additional phonon scattering channels reducing the thermal conductivity. An exhaustive investigation of the dynamical stability for both zero-temperature and high-temperature conditions was also performed to support the stability of ScYCBr2. Our analysis shows that thanks to its asymmetric structure, the ScYCBr2 MXene has thermoelectric properties that largely surpass those of its parent symmetric counterpart Sc2CBr2, being a material with a remarkable thermoelectric high figure of merit. Another advantage of ScYCBr2 is its high carrier mobility. This work not only demonstrates that this material is a promising thermoelectric material but also shows that ScYCBr2 can operate efficiently at high temperatures up to 1200 K.
ABSTRACT
Ab initio atomistic thermodynamics (AIAT) has become an indispensable tool to estimate Gibbs free energy changes for solid surfaces interacting with gaseous species relative to pressure (p) and temperature (T). For such systems, AIAT assumes that solid vibrational contributions to Gibbs free energy differences cancel out. However, the validity of this assumption is unclear for nanoscale systems. Using hydrated titania nanoparticles (NPs) as an example, we estimate the vibrational contributions to the Gibbs free energy of hydration (ΔGhyd(T,p)) for arbitrary NP size and degree of hydration. Comparing ΔGhyd(T,p) phase diagrams for NPs when considering these contributions (AIATnano) relative to a standard AIAT approach reveals significant qualitative and quantitative differences, which only become negligible for large systems. By constructing a size-dependent ΔGhyd(T,p) phase diagram, we illustrate how our approach can provide deeper insights into how nanosytems interact with their environments, with many potential applications (e.g., catalytic nanoparticles, biological colloids, nanoparticulate pollutants).
ABSTRACT
Correction for 'The nature of the electronic ground state of M2C (M = Ti, V, Cr, Zr, Nb, Mo, Hf, Ta, and W) MXenes' by Néstor García-Romeral et al., Phys. Chem. Chem. Phys., 2023, 25, 31153-31164, https://doi.org/10.1039/D3CP04402E.
ABSTRACT
First-principles calculations based on density functional theory are performed to investigate the formation of titania/MXene composites taking (TiO2)5/M2C (M = Ti, Zr, Hf, V, Nb, Ta, Cr, Mo, and W) as cases of study. The present systematic analysis confirms a favorable, high exothermic interaction, which promotes important structural reconstructions of the (TiO2)5 cluster along with charge transfer from the MXene to titania. MXenes composed of d3 transition metals promote the strongest interaction, deformation energy, and charge transfer, followed by d4 and d5 M2C MXenes. We provide evidence that the formation of these (TiO2)5/M2C composites is governed by charge transfer, leading to scaling relationships. By using the electronegativity of the metal composing MXene and the MXene d-band center, we also establish linear correlations that can be used to predict the interaction strength of (TiO2)5/M2C composites just from the knowledge of the MXene composition. It is likely that the present trends hold for other TiO2/MXene composites.
ABSTRACT
Reducing the size of titania (TiO2) to the nanoscale promotes the photoactive anatase phase for use in a range of applications from industrial catalysis to environment remediation. The nanoscale dimensions of these systems affect the magnitude of the electronic energy gap by quantum confinement. Upon interaction with aqueous environments or water vapour, the surfaces of these systems will also be hydroxylated to some degree. In turn, this affects the electronic energy levels due to the cumulative electrostatic effect of the dipolar hydroxyl (-OH) ligands (i.e. the ligand dipole effect). Using accurate density functional calculations, we investigate the combined effects of quantum confinement and the hydration-induced ligand dipole effect on a set of realistic titania nanosystems over a wide range of hydroxylation. Our detailed investigation reveals that, contrary to previous models, the ligand dipole effect does not-linearly depend on the ligand coverage due to the formation of inter-ligand OHâ¯OH hydrogen bonds. To account for the resulting effects, we propose a refined model, which describes the ligand dipole effect more accurately in our systems. We show that both hydroxylation (by the ligand dipole effect) and size (by quantum confinement) have significant but distinct impacts on the electronic energy levels in nanotitania. As an example, we discuss how variations in these effects can be used to tune the highest unoccupied energy level in nanotitania for enhancing the efficiency of the hydrogen evolution reaction. Overall, we show that any specific energy shift can be achieved by a range of different combinations of nanosystem size and degree of hydroxylation, thus providing options for energy-level tuning while also allowing consideration of practical constraints (e.g. synthetic limitations, operating conditions) for photochemical applications.
ABSTRACT
The time evolution of the exciton generated by light adsorption in a photocatalyst is an important feature that can be approached from full nonadiabatic molecular dynamics simulations. Here, a crucial parameter is the nonradiative recombination rate between the hole and the electron that form the exciton. In the present work, we explore the performance of a Fermi's golden rule-based approach on predicting the recombination rate in a set of photoactive titania nanostructures, relying solely on the coupling of the ground and first excited state. In this scheme the analysis of the first excited state is carried out by invoking Kasha's rule thus avoiding computationally expensive nonadiabatic molecular dynamics simulations and resulting in an affordable estimate of the recombination rate. Our results show that, compared to previous ones from nonadiabatic molecular dynamics simulations, semiquantitative recombination rates can be predicted for the smaller titania nanostructures, and qualitative values are obtained from the larger ones. The present scheme is expected to be useful in the field of computational heterogeneous photocatalysis whenever a complex and computationally expensive full nonadiabatic molecular dynamics cannot be carried out.
ABSTRACT
First-principles calculations on titania clusters (TiO2)n (n=5 and 10) supported on the pristine Ti2C (0001) surface were carried out to understand the properties of semiconductor/MXene composites with implications in (photo)-catalysis. The reported results reveal a high exothermic interaction accompanied by a substantial charge transfer with a concomitant, notorious, deformation of the titania nanoclusters. The analysis of the density of states analysis of the composite systems evidences a metallic character with titania related states crossing the Fermi level. The picture of the chemical bonds is completed by the analysis of X-Ray Photoelectron Spectra (XPS) features, evidencing clear shifts of the C(1s) and O(1s) related peaks relative to the isolated systems that have a quite complex origin. This detailed analysis provides insights to experimentalists interested in the design and synthesis of these systems with possible applications in catalysis.
ABSTRACT
A systematic computational study is presented aimed at accurately describing the electronic ground state nature and properties of M2C (M = Ti, V, Cr, Zr, Nb, Mo, Hf, Ta, and W) MXenes. Electronic band structure calculations in the framework of density functional theory (DFT), carried out with different types of basis sets and employing the generalized gradient approach (GGA) and hybrid functionals, provide strong evidence that Ti2C, Zr2C, Hf2C, and Cr2C MXenes exhibit an open-shell conducting ground state with localized spins on the metal atoms, while V2C, Nb2C, Mo2C, Ta2C, and W2C MXenes exhibit a diamagnetic conducting ground state. For Ti2C, Zr2C, Hf2C, and Cr2C, the analysis of the low-lying spin polarized solutions with different spin orderings indicates that their ground states are antiferromagnetic (AFM), consisting of two ferromagnetic (FM) metal layers coupled antiferromagnetically. For the diamagnetic MXenes, the converged spin polarized solutions are significantly less stable than the closed shell solution except for the case of V2C and Mo2C where those excited open shell solutions can be thermally accessible (less than 300 meV per formula unit). The analysis of charge and spin density distributions of the ground state of the MXenes reveals that, in all cases, the metal atoms have a net charge close to +1 e and C atoms close to -2 e. In the case of diamagnetic MXenes, the electronic structure of V2C, Nb2C, and Ta2C is consistent with metal atoms exhibiting a closed-shell s2d2 configuration whereas for Mo2C, and W2C is consistent with a low-spin s1d4 configuration although the FM solution is close in energy for V2C and Mo2C suggesting that they may play a role in their chemistry at high temperature. For the open shell MXenes, the spin density primarily located at the metal atoms showing one unpaired electron per Ti+, Zr+, and Hf+ magnetic center, consistent with s2d1 configuration of the metal atom, and of â¼3.5 unpaired electrons per Cr+ magnetic center interpreted as a mixture of s2d3 and high-spin s1d4 configuration. Finally, the analysis of the density of states reveals the metallic character of all these bare MXenes, irrespective of the nature of the ground state, with significant covalent contributions for Mo2C and W2C.
ABSTRACT
The discovery of novel materials for catalytic purposes that are highly stable is one of the main challenges nowadays for reducing our dependence on fossil fuels. Here, low-dimensional PbTiO3 is introduced as an electrocatalyst using first-principles calculations. Density-functional theory calculations indicate that 2D-PbTiO3 is dynamically and thermodynamically stable. Our results show that a single oxygen defect vacancy in 2D-PbTiO3 can play a key role in enhancing the hydrogen evolution reaction (HER), together with the Ti atoms. Our study concludes that the Volmer-Heyrovsky mechanism is a more favorable route to achieve HER than the Volmer-Tafel mechanism, including solvation and vacuum conditions.
ABSTRACT
The effect of N-doping of titania (TiO2) nanoparticles (NPs) on their reduction through neutral O vacancy (Ovac) formation is investigated using all electron density functional theory-based calculations, including hybrid density functionals, and taking the bipyramidal anatase (TiO2)84 NP as a realistic model. The location of the N dopant is systematically analyzed, including O substitution in the (TiO2)84 structure and N occupying interstitial regions. Our computational study concludes that interstitial N doping is more favorable than N substituting O atoms and confirms that the presence of N reduces the energy gap. In the N-doped NP, Ovac formation is more favored than in undoped NP but less than in the N-doped bulk, which has important consequences.
ABSTRACT
The magnetic nature of Ti2C, Ti3C2, and Ti4C3 MXenes is determined from periodic calculations within density functional theory and using the generalized gradient approximation based PBE functional, the PBE0 and HSE06 hybrids, and the on-site Hubbard corrected PBE+U one, in all cases using a very tight numerical setup. The results show that all functionals consistently predict a magnetic ground state for all MXenes, with spin densities mainly located at the Ti surface atoms. The analysis of solutions corresponding to different spin orderings consistently show that all functionals predict an antiferromagnetic conducting ground state with the two ferromagnetic outer (surface) Ti layers being antiferromagnetically coupled. A physically meaningful spin model is proposed, consistent with the analysis of the chemical bond, with closed shell, diamagnetic, Ti2+ like ions in inner layers and surface paramagnetic Ti+ like centers with one unpaired electron per magnetic center. From a Heisenberg spin model, the relevant isotropic magnetic coupling constants are extracted from an appropriate mapping of total energy differences per formula unit to the expected energy values of the spin Hamiltonian. While the numerical values of the magnetic coupling constants largely depend on the used functional, the nearest neighbor intralayer coupling is found to be always ferromagnetic, and constitutes the dominant interaction, although two other non-negligible interlayer antiferromagnetic terms are involved, implying that the spin description cannot be reduced to NN interaction only. The influence of the MXene thickness is noticeable for the dominant ferromagnetic interaction, increasing its value with the MXene width. However, the interlayer interactions are essentially due to the covalency effects observed in all metallic solutions which, as expected, decay with distance. Within the PBE+U approach, a U value of 5 eV is found to closely simulate the results from hybrid functionals for Ti2C and less accurately for Ti3C2 and Ti4C3.
ABSTRACT
This Perspective aims at providing a road map to computational heterogeneous photocatalysis highlighting the knowledge needed to boost the design of efficient photocatalysts. A plausible computational framework is suggested focusing on static and dynamic properties of the relevant excited states as well of the involved chemistry for the reactions of interest. This road map calls for explicitly exploring the nature of the charge carriers, the excited-state potential energy surface, and its time evolution. Excited-state descriptors are introduced to locate and characterize the electrons and holes generated upon excitation. Nonadiabatic molecular dynamics simulations are proposed as a convenient tool to describe the time evolution of the photogenerated species and their propagation through the crystalline structure of photoactive material, ultimately providing information about the charge carrier lifetime. Finally, it is claimed that a detailed understanding of the mechanisms of heterogeneously photocatalyzed reactions demands the analysis of the excited-state potential energy surface.
ABSTRACT
The nature of the electronic ground state of the Ti2C MXene is unambiguously determined by making use of density functional theory-based calculations including hybrid functionals together with a stringent computational setup providing numerically converged results up to 1 meV. All the explored density functionals (i.e., PBE, PBE0, and HSE06) consistently predict that the Ti2C MXene has a magnetic ground state corresponding to antiferromagnetic (AFM)-coupled ferromagnetic (FM) layers. A spin model, with one unpaired electron per Ti center, consistent with the nature of the chemical bond emerging from the calculations, is presented in which the relevant magnetic coupling constants are extracted from total energy differences of the involved magnetic solutions using an appropriate mapping approach. The use of different density functionals enables us to define a realistic range for the magnitude of each of the magnetic coupling constants. The intralayer FM interaction is the dominant term, but the other two AFM interlayer couplings are noticeable and cannot be neglected. Thus, the spin model cannot be reduced to include nearest-neighbor interactions only. The Néel temperature is roughly estimated to be in the 220 ± 30 K, suggesting that this material can be used in practical applications in spintronics and related fields.
ABSTRACT
Titania (TiO2) nanoparticles (NPs) are widely employed in applications that take advantage of their photochemical properties (e.g. pollutant degradation, photocatalysis). Here, we study the interrelation between crystallinity, surface hydroxylation and electronic structure in titania NPs with 1.4-2.3 nm diameters using all electron density functional theory-based calculations. We show how the distribution of local coordination environments of the atoms in thermally annealed quasi-spherical non-crystalline NPs converge to those in correspondingly sized faceted crystalline anatase NPs upon increasing hydroxylation. When highly hydroxylated, annealed NPs also possess electronic energy gaps with very similar energies and band edge orbital characters to those of the crystalline anatase NPs. We refer to the crystallite-mimicking non-crystalline annealed NPs as "crystalikes". Small stable crystalike NPs could allow for photochemical applications of titania in the size range where crystalline anatase NPs tend to become thermodynamically unfavoured (<3-5 nm). Our work implies the anatase crystal structure may not be as essential as previously assumed for TiO2 NP applications and generally suggests that crystalikes could be possible in other nanomaterials.
ABSTRACT
From grain boundaries and heterojunctions to manipulating 2D materials, solid-solid interfaces play a key role in many technological applications. Understanding and predicting properties of these complex systems present an ongoing and increasingly important challenge. Over the last few decades computer simulation of interfaces has become vastly more powerful and sophisticated. However, theoretical interface screening remains based on largely heuristic methods and is strongly biased to systems that are amenable to modelling within constrained periodic cell approaches. Here we present an unconstrained and generally applicable non-periodic screening approach for systematic exploration of material's interfaces based on extracting and aligning disks from periodic reference slabs. Our disk interface method directly and accurately describes how interface structure and energetic stability depends on arbitrary relative displacements and twist angles of two interacting surfaces. The resultant detailed and comprehensive energetic stability maps provide a global perspective for understanding and designing interfaces. We confirm the power and utility of our method with respect to the catalytically important TiO2 anatase (101)/(001) and TiO2 anatase (101)/rutile (110) interfaces.
ABSTRACT
C-Doping of titania nanoparticles is analyzed by using all-electron density functional theory-based calculations considering the (TiO2)84 nanoparticle as a realistic representative of nanoparticles in the scalable regime. Several sites are evaluated including substituting oxygen (CO) and titanium (CTi) sites as well as interstitial (Ci) situations. The formation energy of such a doped structure is studied as a function of the oxygen chemical potential (or oxygen partial pressure). Our calculations predict that low partial oxygen pressure favors the formation of C-doped (TiO2)84 NPs at oxygen and interstitial sites. For the former, the most stable situation is for O sites at the inner part of the nanoparticle. Interestingly, the substitution of O by C at facet sites requires formation energies as those reported in previous studies where the bulk anatase and surfaces models were considered. However, C-doping - at other low coordinated sites not presented in extended models - is even more favorable which shows the need to employ more realistic models for nanostructures involved in photocatalytic processes.
ABSTRACT
A high-throughput analysis based on density functional simulations underscores the viable epitaxial growth of MXenes by alternating nitrogen and metal adlayers. This is supported by an exhaustive analysis of a number of thermodynamic and kinetic thresholds belonging to different critical key steps in the course of the epitaxial growth. The results on 18 pristine N- and C-based MXenes with M2X stoichiometry reveal an easy initial N2 fixation and dissociation, where N2 adsorption is controlled by the MXene surface charge and metal d-band center and its dissociation controlled by the reaction energy change. Furthermore, formation energies indicate the plausible formation of N-terminated M2XN2 MXenes. Moreover, the further covering with metal adlayers is found to be thermodynamically driven and stable, especially when using early transition metal atoms. The most restrictive analyzed criterion is the N2 adsorption and dissociation at nearly full N-covered adlayers, which is yet achievable for almost half of the explored M2X seeds. The present results unfold the possibility of expanding, controlling, and tuning the composition, width, and structure of the MXene family.
ABSTRACT
The study of novel two-dimensional structures for potential applications in photocatalysis or in optoelectronics is a challenging task. In this work, first-principles calculations have been carried out to explore the properties of the two-dimensional perovskite-based MgPSe3. Dynamic and mechanical analyses confirm the stability of this low-dimensional material. Our calculated Raman frequencies are in good agreement with previous studies. Furthermore, a topological bonding analysis, based on the electron localization function, indicates a covalent and ionic character for the P-Se and Mg-Se bonds, respectively. From a reactivity point of view, water interacts poorly with MgPSe3 and its associative interaction is physisorbed and governed by weak interactions. Consequently, the low dissociative energy of H2O molecules affects the reaction taking place on the surface of the material, making it unfavorable for both hydrogen and oxygen evolution reactions. However, the computed electronic properties show that MgPSe3 is a promising material for optoelectronic applications.
ABSTRACT
Understanding the water splitting mechanism in photocatalysis is a rewarding goal as it will allow producing clean fuel for a sustainable life in the future. However, identifying the photocatalytic mechanisms by modeling photoactive nanoparticles requires sophisticated computational techniques based on multiscale modeling. In this review, we will survey the strengths and drawbacks of currently available theoretical methods at different length and accuracy scales. Understanding the surface-active site through Density Functional Theory (DFT) using new, more accurate exchange-correlation functionals plays a key role for surface engineering. Larger scale dynamics of the catalyst/electrolyte interface can be treated with Molecular Dynamics albeit there is a need for more generalizations of force fields. Monte Carlo and Continuum Modeling techniques are so far not the prominent path for modeling water splitting but interest is growing due to the lower computational cost and the feasibility to compare the modeling outcome directly to experimental data. The future challenges in modeling complex nano-photocatalysts involve combining different methods in a hierarchical way so that resources are spent wisely at each length scale, as well as accounting for excited states chemistry that is important for photocatalysis, a path that will bring devices closer to the theoretical limit of photocatalytic efficiency.
ABSTRACT
A computational study was carried out to investigate the effect of surface termination on Janus Hf2COS MXene by substituting partly the O-terminated layer with S atoms. Our predictions confirm that this chemical strategy allows one to tailor the band gap of MXenes. Indeed, the semiconducting character of Hf2CO2 MXene decreases by the exchange of O by S atoms. From a structural point of view, dynamical, mechanical, and thermal analysis confirm the thermodynamic stability of the Janus Hf2COS MXene, which shows metallic character. Furthermore, topological chemical analysis indicates an ionic nature of Hf2CO2 MXene that tends to be reduced by increasing the concentration of S atoms, promoting a covalent character. Shortly, the present study illustrates how the properties of MXenes can be tailored by functionalizing them with different chemical terminations.