Graphene Oxide Enhanced Monoethanolamine and Ethylenediamine Nanofluids for Efficient Carbon Dioxide Uptake from Flue Gas.

The addition of nanoparticles in amine solutions to produce a stable amine-based nanofluid provides a high surface area for absorption and improves the absorption rate. In this work, nanofluids were prepared by dispersing graphene oxide (GO) in monoethanolamine (MEA) and ethylenediamine (EDA) solutions for adsorption of carbon dioxide (CO2) to further improve their absorption performance by providing more reaction sites on the GO framework. GO was synthesized using the modified Hummers method and characterized for physicochemical properties using SEM, EDS, FTIR, Raman analysis, and TGA. The FTIR spectra for the GO nanoparticles before absorption showed peaks attributed to C-C, H-C, and C-O bonding. After the absorption experiments, the FTIR spectra of GO showed peaks due to C-O-NH2, N-O-N, and N-H bonding. The BET analysis further confirmed the decrease in the surface area, pore volume, and pore diameter of the GO recovered from the nanofluids after the CO2 experiment, indicating an interaction between GO and amine molecules. The absorption process of CO2 by the nanofluid was performed in a custom-made pressure chamber whereby the CO2 gas was in direct contact with the absorption fluids. The obtained adsorption rate constant (k) for the reaction between CO2 and 30% MEA and EDA solutions was 0.113 and 0.131, respectively. Upon addition of 0.2 mg/mL GO in the base solution, k increased to 0.16854 and 0.17603 for the MEA and EDA nanofluids, respectively. The proposed mechanism involves GO nanoparticles interacting with the amine groups through the oxygen-rich groups of GO. This results in the formation of a zwitterion that readily reacts with CO2, resulting in a carbamate.

The removal of pathogenic bacteria and dissolved organic matter from freshwater using microporous membranes: insights into biofilm formation and fouling reversibility.

Pathogenic bacteria in drinking-water pose a health risk to consumers, as they compromise the quality of portable water. Chemical disinfection of water containing dissolved organic matter (DOM) causes harmful disinfection by-products. In this work, 4-hydroxybenzoic acid (4-HBA) blended polyethersulfone membranes were fabricated and characterised using microscopic and spectroscopic techniques. The membranes were evaluated for the removal of bacteria and DOM from synthetic and environmental water. Permeate flux increased from 287.30 to 374.60 l m-2 h-1 at 3 bars when 4-HBA increased from 0 to 1.5 wt.%, suggesting that 4-HBA influenced the membrane's affinity for water. Furthermore, 4-HBA demonstrated antimicrobial properties by inhibiting bacterial growth. The membrane with 1 wt.% 4-HBA recorded 99.4 and 100% bacteria removal in synthetic and environmental water, respectively. Additionally, DOM removal of 55-73% was achieved. A flux recovery ratio (FRR) of 94.6% was obtained when a mixture of bacteria and humic acid was filtered, implying better fouling layer reversibility during cleaning. Furthermore, 100% FRR was achieved when a multimedia granular filtration step was installed prior to membrane filtration. The results illustrated that the membranes had a high permeate flux with low irreversible fouling. This indicated the potential of the membranes in treating complex feed streams using simple cleaning protocols.

Modeling the antifouling properties of atomic layer deposition surface-modified ceramic nanofiltration membranes.

This work investigates the enhancement of antifouling properties of ceramic nanofiltration membranes by surface modification via atomic layer deposition (ALD) of TiO2. Feed solutions containing bovine serum albumin (BSA), humic acid (HA) and sodium alginate (SA) were used as model foulants. The classic fouling mechanism models and the modified fouling indices (MFI) were deduced from the flux decline profiles. Surface roughness values of the ALD coated and uncoated membranes were 63 and 71 nm, respectively, while the contact angles were 34.2 and 59.5°, respectively. Thus, coating increased the water affinity of the membrane surfaces and consequently improved the anti-fouling properties. The MFI values and the classic fouling mechanism correlation coefficients for cake filtration for the ALD coated and the uncoated membrane upon SA fouling were 42,963 (R2 = 0.82) and 143,365 sL-2 (R2 = 0.98), respectively, whereas the correlation coefficients for the combined foulants (SA + BSA + HA) were 267,185 (R2 = 0.99) and 9569 sL-2 (R2 = 0.37), respectively. The study showed that ALD can effectively enhance the antifouling properties of ceramic membranes.

Characterization of natural organic matter in South African drinking water treatment plants: Towards integrating ceramic membrane filtration.

This work presents the first comprehensive investigation of natural organic matter (NOM) fraction removal using ceramic membranes in South Africa. The rate of removal of bulk NOM (measured as UV254 and DOC % removal), the biodegradable dissolved organic carbon (BDOC) fraction, polarity-based fractions, and fluorescent dissolved organic carbon (FDOM) fractions was investigated from water abstracted from drinking water treatment plants (WTPs) in South Africa. Further, mechanisms of ceramic membrane fouling by waters of South Africa were studied. Ceramic membranes removed more than 80% DOC from samples from coastal WTPs, whereas for inland plants, the removal was between 60% and 75% of DOC. FDOM was removed to at least 80% regardless of the site of the plant. The BDOC removal by the ceramic membranes was above 85%. The hydrophobic fraction was the most amenable to removal by ceramic membranes regardless of the site of sample abstraction (above 60% for all sites). The freshness index (ß:α) correlated strongly to UV254 removal (R2 = 0.96), thus UV254 removal can serve as a proxy for the susceptibility to removal of such class of NOM by ceramic membranes. This investigation demonstrated that ceramic membranes could be a valuable technology if integrated into the existing WTPs. PRACTITIONER POINTS: The removal of bulk parameters by ceramic membrane was greater than unit conventional processes used in all the sampled water treatment plants. The hydrophobic polarity-based fraction of NOM was the most amenable to removal by ceramic membranes regardless of the site of the WTP. Polarity-based fractions, aromaticity, and initial DOC had a combined influence on the removal of organic matter by ceramic membranes as explained by principal component three.

Delayed Solvent-Nonsolvent Demixing Preparation and Performance of a Highly Permeable Polyethersulfone Ultrafiltration Membrane.

Membrane performance optimization is a critical preparation step that ensures optimum separation and fouling resistance. Several studies have employed additives such as carbon and inorganic nanomaterials to optimize membrane performance. These particles provide excellent results but are rather costly, unstable and toxic to several biological organs. This study demonstrated that performance enhancement can also be achieved through delayed solvent−nonsolvent demixing during phase inversion membrane preparation. The rate of solvent−nonsolvent demixing was delayed by increasing the concentration of the solvent in the coagulation bath. This study employed synthetic and real water samples and several analytical techniques to compare optimized performances and properties of membranes prepared in this study with that of nanoparticle-embedded membranes in the literature. Pure water flux and BSA rejection of the membranes prepared in this study were comparable to those of nanoparticle embedded membranes. This study also shows the influence of delayed solvent−nonsolvent demixing on membrane properties such as morphology, wettability, surface roughness and porosity, thereby showing the suitability of the technique in membrane optimization. Furthermore, fouling studies showed that membranes prepared in this study have high flux recovery when fouled by humic acid feed water (>95%) and above 50% flux recovery with real water samples.

Fundamental fouling mechanisms of dissolved organic matter fractions and their implications on the surface modifications of ceramic nanofiltration membranes: insights from a laboratory scale application.

This work reports on the fundamental factors influencing inter-foulant and foulant-membrane interactions during simulated dissolved organic matter removal using ceramic nanofiltration. Fouling tests were performed using sodium alginate (SAL), humic acid (HA) and bovine serum albumin (BSA) as model foulants. Fouling potentials of each foulant and their mixtures were investigated using feed solutions containing fixed concentrations of K+, Na+, Mg2+ and Ca2+ with a total ionic strength of 10 mM. The impact of modification by atomic layer deposition on fouling mitigation was also assessed. The flux decline in the first 100 min for single foulants was 4.16 × 10-2, 2.69 × 10-2 and 1.60 × 10-2 Lm-2 for SAL, HA and BSA, respectively. These results demonstrated that for the single foulants, deposition on the membrane surface in the early stages of filtration was primarily governed by membrane-foulant interactions. Interestingly, cake filtration was the least fouling mechanism in feed solutions composed of BSA and SAL (R2 = 0.519, 0.374 for BSA + SAL and BSA + SAL + HA, respectively) and the most favorable fouling mechanism of feed solution which included HA and SAL (R2 = 0.972). The water contact angle dropped from 58o to 35° after coating, thus improving its anti-fouling properties.

Preparation, characterization, and application of polypropylene-clinoptilolite composites for the selective adsorption of lead from aqueous media.

A polymer composite of polypropylene (PP) and clinoptilolite (CLI) for the adsorption of lead has been prepared using the melt-mixing compounding technique in a rheomixer. Characterization of the composite was performed using scanning electron microscopy-energy dispersive spectroscopy (SEM-EDS), X-ray diffraction (XRD), Brunuer-Emmett-Teller (BET), and Fourier transform infrared spectroscopy (FTIR). The influence of contact time, pH, initial metal-ion concentration, temperature, and pretreatment on the adsorption of lead (Pb) by the PP-CLI composite was investigated. Optimum pH was found to be between pH 6 and pH 8 while the maximum sorption of lead at optimal pH was 95%. No difference was observed between the adsorption behavior of composites functionalized with 20% and 30% clinoptilolite, respectively, while the pretreatment with HCl and NaCl made a slight difference to the adsorption capacity of composites. The findings from this study on the lead adsorption behavior of CLI-PP composite may have potential applications in wastewater and water purification works.