ABSTRACT
Nowadays, it is very important to produce new-generation drugs with antimicrobial properties that will target biofilm-induced infections. The first target for combating these microorganisms, which are the source itself. Antimicrobial peptides, which are more effective than antibiotics due to their ability to kill microorganisms and use a different metabolic pathway, are among the new options today. The aim of this study is to develop new-generation antibiotics that inhibit both biofilm-producing bacteria and the biofilm itself. For this purpose, we designed four different peptides by combining two amino acid forms (D- and L-) with the same sequence having alpha helix structures. It was found that the combined use of these two forms can increase antimicrobial efficacy more than 30-fold. These results are supported by molecular modeling and scanning electron microscopy (SEM), at the same time cytotoxicity (IC50) and hemotoxicity (HC50) values remained within the safe range. Furthermore, antibiofilm activities of these peptides were investigated. Since the existing biofilm inhibition methods in the literature do not technically simulate the exact situation, in this study, we have developed a real-time observable biofilm model and a new detection method based on it, which we call the CoMIC method. Findings have shown that the NET1 peptide with D-leucine amino acid in its structure and the NET3 peptide with D-arginine amino acid in its structure are effective in inhibiting biofilm. As a conclusion, our peptides can be considered as potential next-generation broad-spectrum antibiotic molecule/drug candidates that might be used in biofilm and clinical important bacteria. KEY POINTS: ⢠Antimicrobial peptides were developed to inhibit both biofilms producing bacteria and the biofilm itself. ⢠CoMIC will fill a very crucial gap in understanding biofilms and conducting the necessary quantitative studies. ⢠Molecular modelling studies, NET1 peptide molecules tends to move towards and adhere to the membrane within nanoseconds.
Subject(s)
Anti-Bacterial Agents , Antimicrobial Peptides , Biofilms , Microbial Sensitivity Tests , Biofilms/drug effects , Antimicrobial Peptides/pharmacology , Antimicrobial Peptides/chemistry , Anti-Bacterial Agents/pharmacology , Anti-Bacterial Agents/chemistry , Models, Molecular , Microscopy, Electron, Scanning , Bacteria/drug effectsABSTRACT
Since its emergence in December 2019, SARS-CoV-2 is causing one of the most devastating pandemics in human history. Currently, the most important method for definitive diagnosis of COVID-19 is identification of SARS-CoV-2 RNA in nasopharyngeal swab samples by RT-PCR. Nasopharyngeal swab sampling is a discomforting procedure sometimes with adverse effects, which also poses a risk for infection for the personnel performing the sampling. We have developed a new method for concentrating biological samples, which enabled us to use gargle and mouthwash samples to be used in RT-PCR, for the diagnosis of COVID-19, as an alternative to nasopharyngeal swab samples. We have analyzed nasopharyngeal and gargle and mouthwash samples, before and after concentration, of 363 patients by RT-PCR for the presence of SARS-CoV-2. Among 114 patients in which SARS-CoV-2 was identified in at least one of their samples, the virus was identified in 76 (66.7%), 67 (58.8%), and 101 (88.6%) of nasopharyngeal swab, gargle, and mouthwash samples before and after concentration, respectively. When concentrated by our new method, gargle and mouthwash samples can be used instead of nasopharyngeal samples in identification of SARS-CoV-2 by RT-PCR, with the same or better sensitivity. Eliminating the need for nasopharyngeal sampling will save the patients from an invasive and painful procedure and will lower the risk of infection for the healthcare personnel taking the sample. This easy sampling procedure may decrease the workload of hospitals, shorten the turnaround time of obtaining test results, and thus enable rapid isolation of infected patients.
Subject(s)
COVID-19 Nucleic Acid Testing/methods , COVID-19/diagnosis , Diagnostic Tests, Routine/methods , Mouthwashes/analysis , COVID-19/virology , Humans , Nasopharynx/virology , RNA, Viral/genetics , SARS-CoV-2/genetics , SARS-CoV-2/isolation & purification , Specimen HandlingABSTRACT
In this study, we provide a method using fluorescently labeled oligonucleotides for the diagnosis of microorganisms producing nucleases in real time, while growing them in culture media. The detection of such microorganisms was possible in a short period of time, as short as 10 minutes up to a maximum of 8 hours, depending on the bacterial density. We also showed the suitability of this new method for determination of minimum inhibitory concentration (MIC) in culture media in a very short period of time, compared to conventional methods. We believe that it can make a significant contribution to gain new insights for analysis of complex materials such as clinical samples, food samples and environmental samples.
Subject(s)
Bacteriological Techniques/methods , Deoxyribonucleases/analysis , Fluorescent Dyes/chemistry , Oligonucleotide Probes/chemistry , Anti-Infective Agents/pharmacology , Candida albicans/enzymology , Candida albicans/isolation & purification , Culture Media/chemistry , Enterococcus faecalis/enzymology , Enterococcus faecalis/isolation & purification , Escherichia coli/enzymology , Escherichia coli/isolation & purification , Microbial Sensitivity Tests , Staphylococcus aureus/enzymology , Staphylococcus aureus/isolation & purificationABSTRACT
Four multicaulin and miltirone-like phenanthrene derivatives were synthesised and evaluated as antituberculosis agents. The crucial step of the synthesis was Pschorr coupling of 4-(3-isopropyl-4-methoxyphenyl)-2-(2-aminophenyl)ethane (13) to give 2-isopropyl-3-methoxy-9,10-dihydrophenanthrene (9) and 4-isopropyl-3-methoxy-9,10-dihydrophenanthrene (9a). Compound 9 was converted to multicaulin and miltirone-like phenanthrene derivatives by further reactions. The best antituberculosis activity was exhibited by 2-isopropylphenanthrene-3-ol (11).
Subject(s)
Antitubercular Agents/pharmacology , Mycobacterium/drug effects , Phenanthrenes/pharmacology , Antitubercular Agents/chemical synthesis , Antitubercular Agents/chemistry , Dose-Response Relationship, Drug , Microbial Sensitivity Tests , Molecular Structure , Phenanthrenes/chemical synthesis , Phenanthrenes/chemistry , Structure-Activity RelationshipABSTRACT
Quantitative PCR (qPCR) is an important tool in pathogen detection. However, the use of different qPCR components, calibration materials and DNA extraction methods reduces comparability between laboratories, which can result in false diagnosis and discrepancies in patient care. The wider establishment of a metrological framework for nucleic acid tests could improve the degree of standardisation of pathogen detection and the quantification methods applied in the clinical context. To achieve this, accurate methods need to be developed and implemented as reference measurement procedures, and to facilitate characterisation of suitable certified reference materials. Digital PCR (dPCR) has already been used for pathogen quantification by analysing nucleic acids. Although dPCR has the potential to provide robust and accurate quantification of nucleic acids, further assessment of its actual performance characteristics is needed before it can be implemented in a metrological framework, and to allow adequate estimation of measurement uncertainties. Here, four laboratories demonstrated reproducibility (expanded measurement uncertainties below 15%) of dPCR for quantification of DNA from human cytomegalovirus, with no calibration to a common reference material. Using whole-virus material and extracted DNA, an intermediate precision (coefficients of variation below 25%) between three consecutive experiments was noted. Furthermore, discrepancies in estimated mean DNA copy number concentrations between laboratories were less than twofold, with DNA extraction as the main source of variability. These data demonstrate that dPCR offers a repeatable and reproducible method for quantification of viral DNA, and due to its satisfactory performance should be considered as candidate for reference methods for implementation in a metrological framework.
Subject(s)
Cytomegalovirus Infections/diagnosis , Cytomegalovirus/genetics , DNA, Viral/analysis , Laboratory Proficiency Testing/standards , Real-Time Polymerase Chain Reaction/methods , Cytomegalovirus/isolation & purification , Cytomegalovirus Infections/genetics , Cytomegalovirus Infections/virology , DNA, Viral/genetics , Humans , Reproducibility of ResultsABSTRACT
Preventing adulteration of meat and meat products with less desirable or objectionable meat species is important not only for economical, religious and health reasons, but also, it is important for fair trade practices, therefore, several methods for identification of meat and meat products have been developed. In the present study, ten different DNA extraction methods, including Tris-EDTA Method, a modified Cetyltrimethylammonium Bromide (CTAB) Method, Alkaline Method, Urea Method, Salt Method, Guanidinium Isothiocyanate (GuSCN) Method, Wizard Method, Qiagen Method, Zymogen Method and Genespin Method were examined to determine their relative effectiveness for extracting DNA from meat samples. The results show that the salt method is easy to perform, inexpensive and environmentally friendly. Additionally, it has the highest yield among all the isolation methods tested. We suggest this method as an alternative method for DNA isolation from meat and meat products.
Subject(s)
DNA/isolation & purification , Meat Products/analysis , Meat/analysis , Cetrimonium Compounds/chemistry , DNA/analysis , Polymerase Chain Reaction , Spectrometry, FluorescenceABSTRACT
BACKGROUND: Real-time PCR (qPCR) based methods, such as the Xpert MTB/RIF, are increasingly being used to diagnose tuberculosis (TB). While qualitative methods are adequate for diagnosis, the therapeutic monitoring of TB patients requires quantitative methods currently performed using smear microscopy. The potential use of quantitative molecular measurements for therapeutic monitoring has been investigated but findings have been variable and inconclusive. The lack of an adequate reference method and reference materials is a barrier to understanding the source of such disagreement. Digital PCR (dPCR) offers the potential for an accurate method for quantification of specific DNA sequences in reference materials which can be used to evaluate quantitative molecular methods for TB treatment monitoring. METHODS: To assess a novel approach for the development of quality assurance materials we used dPCR to quantify specific DNA sequences in a range of prototype reference materials and evaluated accuracy between different laboratories and instruments. The materials were then also used to evaluate the quantitative performance of qPCR and Xpert MTB/RIF in eight clinical testing laboratories. RESULTS: dPCR was found to provide results in good agreement with the other methods tested and to be highly reproducible between laboratories without calibration even when using different instruments. When the reference materials were analysed with qPCR and Xpert MTB/RIF by clinical laboratories, all laboratories were able to correctly rank the reference materials according to concentration, however there was a marked difference in the measured magnitude. CONCLUSIONS: TB is a disease where the quantification of the pathogen could lead to better patient management and qPCR methods offer the potential to rapidly perform such analysis. However, our findings suggest that when precisely characterised materials are used to evaluate qPCR methods, the measurement result variation is too high to determine whether molecular quantification of Mycobacterium tuberculosis would provide a clinically useful readout. The methods described in this study provide a means by which the technical performance of quantitative molecular methods can be evaluated independently of clinical variability to improve accuracy of measurement results. These will assist in ultimately increasing the likelihood that such approaches could be used to improve patient management of TB.
Subject(s)
DNA, Bacterial/isolation & purification , Mycobacterium tuberculosis/genetics , Real-Time Polymerase Chain Reaction/methods , Tuberculosis, Pulmonary/diagnosis , Adult , Female , Humans , Male , Microscopy , Molecular Diagnostic Techniques , Pathology, Molecular , Sensitivity and SpecificityABSTRACT
Enumeration-based determination of DNA copy-concentration was assessed through an international comparison among national metrology institutes (NMIs) and designated institutes (DIs). Enumeration-based quantification does not require a calibration standard thereby providing a route to "absolute quantification", which offers the potential for reliable value assignments of DNA reference materials, and International System of Units (SI) traceability to copy number 1 through accurate counting. In this study, 2 enumeration-based methods, flow cytometric (FCM) counting and the digital polymerase chain reaction (dPCR), were compared to quantify a solution of the pBR322 plasmid at a concentration of several thousand copies per microliter. In addition, 2 orthogonal chemical-analysis methods based on nucleotide quantification, isotope-dilution mass spectrometry (IDMS) and capillary electrophoresis (CE) were applied to quantify a more concentrated solution of the plasmid. Although 9 dPCR results from 8 laboratories showed some dispersion (relative standard deviation [RSD] = 11.8%), their means were closely aligned with those of the FCM-based counting method and the orthogonal chemical-analysis methods, corrected for gravimetric dilution factors. Using the means of dPCR results, the RSD of all 4 methods was 1.8%, which strongly supported the validity of the recent enumeration approaches. Despite a good overall agreement, the individual dPCR results were not sufficiently covered by the reported measurement uncertainties. These findings suggest that some laboratories may not have considered all factors contributing to the measurement uncertainty of dPCR, and further investigation of this possibility is warranted.
Subject(s)
DNA/analysis , Flow Cytometry/methods , Plasmids/analysis , Polymerase Chain Reaction/methods , Electrophoresis, Capillary , Mass Spectrometry , Nucleotides/analysisABSTRACT
Tuberculosis (TB) remains to be a major global health problem, with about 9 million new cases and 1.4 million deaths in 2011. For the control of tuberculosis as well as other infectious diseases, WHO recommended "ASSURED" (Affordable, Sensitive, Specific, User-friendly, Rapid and robust, Equipment-free, and Deliverable to the end user) diagnostic tools that can easily be maintained and used in developing countries. Aptamers are promising tools for developing point-of-care diagnostic assays for TB. In this study, ssDNA aptamers that recognize Mycobacterium tuberculosis H37Ra were selected by systematic evolution of ligands by exponential enrichment (SELEX). For this purpose, two different selection protocols, ultrafiltration and centrifugation, were applied. A total of 21 TB specific aptamers were selected. These aptamers exhibited "G-rich" regions on the 3' terminus of the aptamers, including a motif of "TGGGG," "GTGG," or "CTGG." Binding capability of selected aptamers were investigated by quantitative PCR and Mtb36 DNA aptamer was found the most specific aptamer to M. tuberculosis H37Ra. The dissociation constant (K d) of Mtb36 aptamer was calculated as 5.09 ± 1.43 nM in 95% confidence interval. Relative binding ratio of Mtb36 aptamer to M. tuberculosis H37Ra over Mycobacterium bovis and Escherichia coli was also determined about 4 times and 70 times more, respectively. Mtb36 aptamer is highly selective for M. tuberculosis, and it can be used in an aptamer-based biosensor for the detection of M. tuberculosis.
Subject(s)
Aptamers, Nucleotide/chemistry , Mycobacterium tuberculosis/isolation & purification , Humans , SELEX Aptamer Technique , Tuberculosis/diagnosisABSTRACT
A fully water soluble 3-hydroxyflavone (3HF) derivative, N-(3-hydroxy-4'-flavonyl)-N,N,N-trimethylammonium sulfate (3HFNMe3) was synthesized. Investigation of its emissions at varying wavelengths revealed that it had three emission bands of normal (N(â)), anionic (A(â)) and tautomeric (T(â)), in ultrapure water. Recognition of single-stranded ten ssDNA chains, having different nucleotide sequences was studied, using the ratiometric change of the intensities of the two bands (A(â)/T(â)), depending upon the varying environment of the 3HFNMe3 with different ssDNA chains. Addition of the ssDNA chains to the 3HFNMe3 solution caused gradual quenching of the A(â) band and had almost no effect on the T(â) band. As the ratios of the two bands (A(â)/T(â)) vs increasing amount of the ssDNAs generated characteristic curves for each ssDNA chain, it became possible to identify the chains with their characteristic curves.
Subject(s)
Flavonoids/chemistry , Fluorescent Dyes/chemistry , Base Composition , DNA, Single-Stranded/chemistry , DNA, Single-Stranded/metabolism , Flavonoids/chemical synthesis , Spectrophotometry, Ultraviolet , Water/chemistryABSTRACT
We have evaluated the efficiency of the TK Rapid Mycobacterial Culture System in isolating mycobacteria from clinical samples and in susceptibility testing. The TK Medium indicates mycobacterial growth by changing its color from red to yellow. During a 1-year period, 16,303 clinical samples were inoculated to TK selective (TK SLC) and Löwenstein-Jensen media (LJ). Mycobacteria were isolated in 2150 (13.04%) samples in at least 1 type of medium. While LJ isolated mycobacteria from 1920 (11.69%) of all samples, TK SLC isolated 2070 (12.63%). Among all positives, the isolation rates for LJ and TK SLC were 89.30% and 96.27%, respectively. Contamination of cultures by other organisms was observed in 878 (5.33%) LJ tubes and in 90 (0.55%) TK SLC tubes. On average, time-to-growth detection was 15.57 days in TK SLC and 25.14 days in LJ. The modes of time-to-growth detection were 12 and 25 days for TK SLC and LJ, respectively. The reliability of antimycobacterial susceptibility testing was checked by 36 Mycobacterium tuberculosis strains with known susceptibility patterns which were obtained from the World Health Organization collection and by participating in an external quality control program. All susceptibility results, except for a few borderline-resistant strains, were consistent with the expected susceptibility patterns. The TK Rapid Mycobacterial Culture System is a practical and reliable automated system that shortens the time required for both culture and susceptibility results. All types of TK Media are ready to use, saving time and effort as well as drastically reducing contamination during testing.
Subject(s)
Antitubercular Agents/pharmacology , Bacteriological Techniques/methods , Culture Media/chemistry , Mycobacterium tuberculosis/drug effects , Mycobacterium tuberculosis/growth & development , Tuberculosis/diagnosis , Automation , Humans , Microbial Sensitivity Tests/methods , Mycobacterium tuberculosis/isolation & purification , Reproducibility of Results , Sputum/microbiology , Time Factors , Tuberculosis/microbiologyABSTRACT
The fatty acid composition of the seed oil of 23 Stachys taxa was analysed by GC/MS. The main compounds were found to be linoleic (27.1-64.3%), oleic (20.25-48.1%), palmitic (4.3-9.1%), stearic (trace to 5.2%) and 6-octadecynoic (2.2-34.1%) acids. The latter compound could be used as a chemotaxonomic marker of the genus Stachys. A cluster analysis was performed for comparison and characterisation of the seed oil from Stachys species.