The impact of posterior epidural adipose tissue on postoperative outcomes after posterior decompression surgery for lumbar spinal stenosis: A prospectively randomized non-inferiority trial.

STUDY DESIGN: The present study is a prospectively randomized study. OBJECTIVE: The objective of the study was to evaluate the impact of posterior epidural adipose tissue (PAT) on postoperative outcome following lumbar decompression surgery for lumbar spinal stenosis (LSS) by whether PAT was removed or preserved during the surgical procedure. SUMMARY OF BACKGROUND DATA: In posterior decompression surgery for LSS, PAT is routinely removed without knowledge of its role and significance. However, considering adipose tissue has regenerative properties of damaged neighboring tissues or itself, PAT, which is adipose tissue located at peridural space, might also have a potential to regenerate the neighboring damaged tissue, including dura and nerve root in the lumbar spine, but this has not been thoroughly studied. METHODS: Of the 185 eligible patients screened for the current study, 181 patients were enrolled and randomly allocated into either group A (PAT removal, n = 90) or group B (PAT retention, n = 91). The primary outcome measure was pain intensity on the lower back and lower extremity. The secondary outcome measures were functional outcome based on the Oswestry disability index (ODI) and walking distance, complications during the surgical procedure, and surgical outcomes. RESULTS: Postoperative pain intensity on the lower back and lower extremity was greater in group A than in group B. Functional status on ODI and walking distance was also worse in group B than in group A (64.9% in group A and 66.2% in group B). The number of patients with aggravated pain intensity and deteriorated functional status in postoperative follow-up times was significantly greater in group A than in group B. There were no significant differences in surgical outcome and complications between the groups. CONCLUSION: Preserving epidural fat may be favorable in postoperative outcomes of posterior decompression surgery for LSS compared to removing epidural fat.

The role of the anterior talofibular ligament area as a morphological parameter of the chronic ankle sprain.

BACKGROUND: Repetitive microtrauma can result in a hypertrophied ATFL. Previous studies have found that the anterior talofibular ligament thickness (ATFLT) is correlated with lateral ankle sprains, ligament injuries and chronic stroke in patients, and thickened anterior talofibular ligament (ATFL) has been considered to be a major morphologic parameter of hypertrophied ATFL. However, hypertrophy is different from thickness. Thus, we devised the anterior talofibular ligament area (ATFLA) as a new morphological parameter to evaluate the hypertrophy of the whole ATFL. METHODS: ATFL samples were collected from 53 patients with sprain group and from 50 control subjects who underwent magnetic resonance imaging (MRI) of the ankle and revealed no evidence of lateral ankle injury. Axial T1-weighted MRI images were collected at the ankle level from all subjects. We measured the ATFLA and ATFLT at the anterior margin of the fibular malleolus to the talus bone on the MRI using a picture archiving and communications system. The ATFLA was measured as the whole cross-sectional ligament area of the ATFL that was most hypertrophied in the axial MR images. The ATFLT was measured as the thickest point between the lateral malleolus and the talus of the ankle. RESULTS: The average ATFLA was 25.0 ± 6.0 mm2 in the control group and 47.1 ± 10.4 mm2 in the sprain group. The average ATFLT was 2.3 ± 0.6 mm in the control group and 3.8 ± 0.6 mm in the hypertrophied group. Patients in sprain group had significantly greater ATFLA (p < 0.001) and ATFLT (p < 0.001) than the control subjects. A Receiver Operator Characteristics curve analysis showed that the best cut-off point of the ATFLA was 34.8 mm2, with 94.3% sensitivity, 94.0% specificity, and an AUC of 0.97 (95% CI, 0.94-1.00). The optimal cut-off point of the ATFLT was 3.1 mm, with 86.8% sensitivity, 86.0% specificity, and AUC of 0.95 (95% CI, 0.92-0.99). CONCLUSION: ATFLA is a new morphological parameter for evaluating chronic ankle sprain, and may even be more sensitive than ATFLT.

Uncinate Process Area as a New Sensitive Morphological Parameter to Predict Cervical Neural Foraminal Stenosis.

BACKGROUND: Hypertrophy of the uncovertebral joint has been considered as a major cause of cervical neural foraminal stenosis (CNFS). The cross-sectional area of the uncinate process is a key morphologic parameter in the identification of uncovertebral joint hypertrophy. To evaluate the connection between CNFS and the uncinate process, we devised a new morphological parameter, the uncinate process area (UPA). OBJECTIVE: We hypothesized that the UPA is an important morphologic parameter in the diagnosis of CNFS. STUDY DESIGN: Retrospective observational study. SETTING: The single center study in Incheon, Republic of Korea. METHODS: UPA data were collected from 146 patients with CNFS and 197 control subjects who underwent neck computed tomography (CT) as part of a routine medical examination. Neck CT images were obtained from all subjects. The whole cross-sectional area of the bone margin of the uncinate process was measured at the C5-6 intervertebral disc level on CT scans using a picture archiving and communications system. RESULTS: The average UPA was 15.52 mm-squared in the control group and 29.97 mm-squared in the CNFS group. The CNFS group displayed significantly greater UPA levels (P < 0.001). Regarding the validity of the UPA as a predictor of CNFS, the receiver operating characteristic curve analysis revealed an optimal cut-off point for the UPA of 21.15 mm-squared, with 91.8% sensitivity, 93.4% specificity, and an area under the curve of 0.972 (95% CI,0.956-0.989) in the CNFS group. LIMITATIONS: Anatomically, the UP is located on the superior lateral surfaces of the C3-7 cervical vertebral bodies. However, we focused on the C5-6 uncovertebral joint level, because many previous studies revealed C6 UP has the greatest height among UP and C5-6 uncovertebral joint hypertrophy is a primary cause of CNFS. CONCLUSIONS: The newly devised UPA is a sensitive parameter for assessing CNFS. A hypertrophied UPA is associated with an increased risk of CNFS. We think that this result will be helpful for diagnostic radiology in evaluating patients with CNFS.Institutional Review Board (IRB) approval number: IS16RISI0002KEY WORDS: Uncinate process area, cervical neural foraminal stenosis, Uncovertebral joint hypertrophy, optimal cut-off point, cross- sectional area.

Diagnosis of periprosthetic joint bacterial infections by culture of sonication fluid from infected implants.

PURPOSE: This study compared the results of a culture method using sonication with those yielded by the conventional culture method, for patients with infected total knee arthroplasty (TKA). We also evaluated the usefulness of sonication for the identification of pathogens in infected TKA cases. METHODS: Isolates were cultured from 13 implants that had been removed from 13 patients with infected TKA. Preoperative culture was performed on aspirated joint fluid, and during the operation, infected tissue was collected for culture. The removed prosthetic implants were cultured before and after sonication. Next, we identified the cultured bacteria using API biochemical kits and 16 S rRNA sequencing. RESULTS: The cultures from preoperative joint fluid and intraoperative tissue were positive in 9 of 13 cases (69.2%). For the removed implants, 10 cases were positive before sonication. After sonication, 12 cases (92.3%) had positive cultures. The pathogen most commonly isolated from the cultures was Staphylococcus aureus. CONCLUSIONS: This study found that a culturing workflow incorporating sonication diagnosed pathogens in patients with infected TKA with higher sensitivity than did the conventional culturing method.

Safety of Temporary Use of Recycled Autoclaved Femoral Components in Infected Total Knee Arthroplasty: Confirming Sterility Using a Sonication Method.

BACKGROUND: The purpose of this study was to evaluate the usefulness of sonication technique for microbiological diagnosis and the sterility of the recycled autoclaved femoral components from infected total knee arthroplasty (TKA) using a sonication method. METHODS: Nineteen femoral implants explanted from patients with infected TKA were sterilized with a standard autoclave method. Standard culture of the fluid before and after sonication of the sterilized implants was performed to detect pathogenic microorganisms. Additional experiments were performed to evaluate the sterility of the recycled implant by inducing artificial biofilm formation. Methicillin-resistant Staphylococcus aureus (MRSA) was inoculated into 10 implants and sterilization in a standard autoclave was performed, and then the fluid was cultured before and after sonication. RESULTS: Two of the 19 sterilized implants were positive for growth of bacteria after sonication, whereas no growth was detected in the cultured fluid from the sterilized implants before sonication. The bacteria were Staphylococcus species in all two cases. In one of 10 implants inoculated with MRSA, the culture was positive for growth of bacteria both before and after sonication. However, Staphylococcus epidermidis was cultured from both occasions and thus this implant was thought to be contaminated. CONCLUSIONS: We found sonication for identification of pathogens could be helpful, but this finding should be interpreted carefully because of the possibility of contamination. Sterilization of an infected femoral implant with an autoclave method could be a good method for using the temporary articulating antibiotic spacer in two-stage revision arthroplasty.

Superior articular process cross-sectional area is a new sensitive parameter for the diagnosis of lumbar central canal spinal stenosis.

PURPOSE: Previous studies reported that hypertrophied superior articular process (SAP) was associated with an increased risk of lumbar foraminal stenosis. However, no study investigated the effect of SAP hypertrophy in lumbar central canal spinal stenosis (LCCSS). We hypothesized that the SAP cross-sectional area (SAPCSA) is the main morphologic feature in the diagnosis of LCCSS. PATIENTS AND METHODS: Data regarding the SAPCSA were collected from 109 patients with LCCSS. All patients were enrolled after the LCCSS diagnosis was confirmed by an experienced, board-certified neuroradiologist. All patients had clinical manifestations compatible with LCCSS. A total of 120 subjects in the control group underwent lumbar spine MRI as part of non-symptomatic medical examination. T2-weighted axial images were obtained from the 2 groups. Using a picture archiving and communications system, we analyzed the CSA of the bone margin of SAP at the level of L4-L5 facet joint on MRI. RESULTS: The average SAPCSA was 96.63±13.37 mm2 in the control group, and 123.59±14.18 mm2 in the LCCSS. The LCCSS group showed significantly higher levels of the SAPCSA (P<0.001) compared with the control one. Receiver operator characteristic (ROC) curve analysis was performed to determine the validity of the SAPCSA as a predictor of LCCSS. In the LCCSS group, the optimal cut-off-point was 110.71 mm2, with 83.5% sensitivity, 83.3% specificity, and area under the curve of 0.92 (95% CI: 0.88-0.95). CONCLUSION: Higher SAPCSA values were associated with a higher possibility of LCCSS. These results are important in the evaluation of patients with LCCSS.

Clenching Reduction Technique for Osteosynthesis of Atypical C2 Fractures with the Combining Use of Laminar and Pedicle Screw: A Technical Note.

Atypical C2 fractures refer to all fracture types of the C2 body excluding odontoid fractures and traumatic spondylolisthesis of C2. A 55-year-old male patient presented with neck pain after a vehicular accident. Computed tomography (CT) showed an oblique fracture line of the C2 vertebral body through the pedicle and lamina with fracture gap and posterior displacement. We used a clenching reduction technique to treat this fracture by using an ipsilateral laminar screw and contralateral pedicle screw. The final follow-up CT scan showed complete bone union. Neck motion was preserved including rotation. For this unstable atypical C2 fracture, the clenching reduction technique proved to be a safe and effective technique while salvaging neck motion.

Dural sac area is a more sensitive parameter for evaluating lumbar spinal stenosis than spinal canal area: A retrospective study.

Narrowing of the dural sac cross-sectional area (DSCSA) and spinal canal cross-sectional area (SCCSA) have been considered major causes of lumbar central canal spinal stenosis (LCCSS). DSCSA and SCCSA were previously correlated with subjective walking distance before claudication occurs, aging, and disc degeneration. DSCSA and SCCSA have been ideal morphological parameters for evaluating LCCSS. However, the comparative value of these parameters is unknown and no studies have evaluated the clinical optimal cut-off values of DSCSA and SCCSA. This study assessed which parameter is more sensitive.Both DSCSA and SCCSA samples were collected from 135 patients with LCCSS, and from 130 control subjects who underwent lumbar magnetic resonance imaging (MRI) as part of a medical examination. Axial T2-weighted MRI scans were acquired at the level of facet joint from each subject. DSCSA and SCCSA were measured at the L4-L5 intervertebral level on MRI using a picture archiving and communications system.The average DSCSA value was 151.67 ±â€Š53.59 mm in the control group and 80.04 ±â€Š35.36 mm in the LCCSS group. The corresponding average SCCSA values were 199.95 ±â€Š60.96 and 119.17 ±â€Š49.41 mm. LCCSS patients had significantly lower DSCSA and SCCSA (both P < .001). Regarding the validity of both DSCSA and SCCSA as predictors of LCCSS, Receiver operating characteristic curve analysis revealed an optimal cut-off value for DSCSA of 111.09 mm, with 80.0% sensitivity, 80.8% specificity, and an area under the curve (AUC) of 0.87 (95% confidence interval, 0.83-0.92). The best cut off-point of SCCSA was 147.12 mm, with 74.8% sensitivity, 78.5% specificity, and AUC of 0.85 (95% confidence interval, 0.81-0.89).DSCSA and SCCSA were both significantly associated with LCCSS, with DSCSA being a more sensitive measurement parameter. Thus, to evaluate LCCSS patients, pain specialists should more carefully investigate the DSCSA than SCCSA.

Effect of multiple intra-articular injections of polynucleotides on treatment of intractable knee osteoarthritis: A case report.

RATIONALE: Knee osteoarthritis (KOA) is a chronic joint degenerative disease. Intra-articular injection (IAI) of hyaluronic acid (HA) is widely used to treat KOA. However, some HA injections have no effect at all. Polynucleotides (PN) are recently noted as a valid substitute for HA. PATIENT CONCERNS: A 61-year-old female was admitted to the pain center with symptoms of pain over the knee and warmth feeling with stiffness in the left knee. The patient reported chronic severe pain in the left knee area despite 6 times IAI of HA. She had past medical history of breast cancer and thyroid cancer. DIAGNOSES: She was diagnosed as having KOA. INTERVENTIONS: Ultrasound-guided IAI of PN was carried out 3 times in 3 weeks. OUTCOMES: She was followed-up for more than 5 months with good improvement in intractable knee pain without any adverse event. LESSONS: IAI of PN is an efficient therapeutic option for KOA treatment if HA injection is unsuccessful.

Effect of polydeoxyribonucleotide injection on pes anserine bursitis: A case report.

RATIONALE: Pes anserine (PA) bursitis is an inflammatory condition of the medial knee. The PA bursa becomes more painful when infected, damaged, or irritated. Although various treatment options have been attempted to treat PA bursitis, optimal treatments are still debated. This study aims to investigate the effect of polydeoxyribonucleotide (PDRN) injection on reducing pain and inflammation in a patient presenting with PA bursitis. PATIENT CONCERNS: A 50-year-old female patient was admitted to our pain clinic with symptoms of tenderness and pain over the medial knee. Physical examination revealed the pain to be located over the proximal medial tibia at the insertion of the conjoined tendons of the PA. The knee had lost its range of movement and strength, and resisted knee flexion. DIAGNOSES: She was diagnosed as having PA bursitis. INTERVENTIONS: Ultrasound guided PA bursa injection was carried out. OUTCOMES: Follow-up for the patient was more than eight months. She showed good improvement in PA bursitis without any complications. LESSONS: This is the first successful report of successful PDRN injection for PA bursa.

Effect of transforaminal epidural polydeoxyribonucleotide injections on lumbosacral radiculopathy: A case report.

RATIONALE: Transforaminal epidural glucocorticoids administration is widely performed for the management of lumbosacral radiculopathy. However, it may worsen the condition of patients with type 2 diabetes mellitus (DM). Polydeoxyribonucleotide (PDRN) was recently noted as a substitute for glucocorticoids. PATIENT CONCERNS: A 44-year-old male patient was admitted to our pain clinic with symptoms of low back pain with severe pain and tingling sensation of left posterolateral leg. He had type 2 DM medicated with Glimepiride and Metformin. Blood glucose level was 367 mg/dL. He declined to use glucocorticoid. DIAGNOSES: He was diagnosed as left foraminal disc protrusion at L4-5, left subarticular disc protrusion at L5-S1. INTERVENTIONS: Fluoroscopically guided transforaminal epidural PDRN injections were carried out. OUTCOMES: The patient was followed up for more than 6 months and demonstrated good improvement in lumbosacral radiculopathy without any complications. LESSONS: This is the first successful report on epidural injection of PDRN.

Total knee arthroplasty conversion for patients with ankylosed knees.

INTRODUCTION: The purpose of this study was to evaluate the results of total knee arthroplasty for patients with ankylosed knees. METHODS: We evaluated seven patients (10 knees) who underwent total knee arthroplasties for ankylosed knees from 1995 to 2008. There were two men and five women, with a mean age of 44.1 years (42-48 years). The mean follow-up period was 10.2 years (1-19.5 years). A rectus snip was performed in all cases, and V-Y quadricepsplasty was used in one case of severe quadriceps contracture. In all cases, we used the PFC Sigma PS fixed model (DePuy Orthopaedics Inc., Warsaw, Indiana, USA). The goal was more than 90° of flexion. Clinical evaluation was performed using range of motion (ROM), Knee Society (KS) Knee Score, KS Function Score, and complications. Radiographs were used to evaluate loosening or osteolysis. RESULTS: The ROF was improved from 9.5° (0-30°) to 78.5° (15-115°), The Knee Score improved from 42.6 (25-70) to 68.6 (41-97), and the Function Score improved from 39 (0-60) to 66 (40-90). A radiolucent line was detected in two cases (one patient) around the tibial component, and one case had a necrosis of skin edge. Only one case had no improvement of motion. CONCLUSION: Total knee arthroplasty conversion for patients with ankylosed knees can achieve good results for motion and function without osteotomy of the tibial tuberosity when there is good quality soft tissue of the thigh.

Analysis of acetabular orientation and femoral anteversion using images of three-dimensional reconstructed bone models.

PURPOSE: Radiographic measurements using two-dimensional (2D) plain radiographs or planes from computed tomography (CT) scans have several drawbacks, while measurements using images of three-dimensional (3D) reconstructed bone models can provide more consistent anthropometric information. We compared the consistency of results using measurements based on images of 3D reconstructed bone models (3D measurements) with those using planes from CT scans (measurements using 2D slice images). METHODS: Ninety-six of 561 patients who had undergone deep vein thrombosis-CT between January 2013 and November 2014 were randomly selected. We evaluated measurements using 2D slice images and 3D measurements. The images used for 3D reconstruction of bone models were obtained and measured using [Formula: see text] and [Formula: see text] (Materialize, Leuven, Belgium). RESULTS: The mean acetabular inclination, acetabular anteversion and femoral anteversion values on 2D slice images were 42.01[Formula: see text], 18.64[Formula: see text] and 14.44[Formula: see text], respectively, while those using images of 3D reconstructed bone models were 52.80[Formula: see text], 14.98[Formula: see text] and 17.26[Formula: see text]. Intra-rater reliabilities for acetabular inclination, acetabular anteversion, and femoral anteversion on 2D slice images were 0.55, 0.81, and 0.85, respectively, while those for 3D measurements were 0.98, 0.99, and 0.98. Inter-rater reliabilities for acetabular inclination, acetabular anteversion and femoral anteversion on 2D slice images were 0.48, 0.86, and 0.84, respectively, while those for 3D measurements were 0.97, 0.99, and 0.97. CONCLUSION: The differences between the two measurements are explained by the use of different tools. However, more consistent measurements were possible using the images of 3D reconstructed bone models. Therefore, 3D measurement can be a good alternative to measurement using 2D slice images.

Percutaneous iliosacral screwing in pelvic ring injury using three-dimensional fluoroscopy.

BACKGROUND: Iliosacral screw fixation is a popular technique for treatment of unstable pelvic injuries involving the posterior ring. However, screw malposition may result in dangerous complications involving injury to adjacent neurovascular structures. This study was conducted in order to evaluate the results and efficacy of using three-dimensional fluoroscopy in the performance of iliosacral screw fixation. METHODS: Twenty-nine patients (31 cases, two bilateral) who suffered injury to the pelvic ring requiring surgical treatment were included in this study. According to the Association for Osteosynthesis-Orthopaedic Trauma Association (AO-OTA) classification, there were 14 patients with type B, 13 patients with type C, and 2 patients with a bilateral sacral fracture. The mean age of patients was 39 years. Once the guide pin had been inserted, its safety was confirmed using three-dimensional fluoroscopy; screw fixation was then performed. Eighteen patients underwent percutaneous iliosacral screw fixation and anterior fixation, while 11 patents underwent screw fixation only. Postoperative computed tomography (CT) was performed for evaluation of the screw position, including any invasion into the sacral foramen or canal and neurovascular injury. The perforation of the screw was divided according to the location (sacral zones I, II, and III) and the degree (grade 0, no perforation; grade 1, perforation <2 mm; grade 2, perforation between 2 and 4 mm; grade 3, perforation >4 mm). RESULTS: The mean operation time was 35.6 min, and the mean radiation exposure time was 85.9 s. For accurate location of the guide pin, one patient underwent three-dimensional reconstruction twice. None of the patients required reoperation or suffered any neurovascular injury. Although seven cases involved perforation, all were less than 2 mm (grade 0: 24 cases, grade 1: 7 cases). CONCLUSIONS: When performing percutaneous iliosacral screw fixation in a patient with an unstable pelvic ring injury, use of three-dimensional fluoroscopy may allow for accurate location of the screw and result in fewer complications.