Monitoring the Formation of Nickel-Poor and Nickel-Rich Oxide Cathode Materials for Lithium-Ion Batteries with Synchrotron Radiation.

The syntheses of Ni-poor (NCM111, LiNi1/3Co1/3Mn1/3O2) and Ni-rich (NCM811 LiNi0.8Co0.1Mn0.1O2) lithium transition-metal oxides (space group R3̅m) from hydroxide precursors (Ni1/3Co1/3Mn1/3(OH)2, Ni0.8Co0.1Mn0.1(OH)2) are investigated using in situ synchrotron powder diffraction and near-edge X-ray absorption fine structure spectroscopy. The development of the layered structure of these two cathode materials proceeds via two utterly different reaction mechanisms. While the synthesis of NCM811 involves a rock salt-type intermediate phase, NCM111 reveals a layered structure throughout the entire synthesis. Moreover, the necessity and the impact of a preannealing step and a high-temperature holding step are discussed.

Variability in X-ray induced effects in [Rh(COD)Cl]2 with changing experimental parameters.

X-ray characterisation methods have undoubtedly enabled cutting-edge advances in all aspects of materials research. Despite the enormous breadth of information that can be extracted from these techniques, the challenge of radiation-induced sample change and damage remains prevalent. This is largely due to the emergence of modern, high-intensity X-ray source technologies and the growing potential to carry out more complex, longer duration in situ or in operando studies. The tunability of synchrotron beamlines enables the routine application of photon energy-dependent experiments. This work explores the structural stability of [Rh(COD)Cl]2, a widely used catalyst and precursor in the chemical industry, across a range of beamline parameters that target X-ray energies of 8 keV, 15 keV, 18 keV and 25 keV, on a powder X-ray diffraction synchrotron beamline at room temperature. Structural changes are discussed with respect to absorbed X-ray dose at each experimental setting associated with the respective photon energy. In addition, the X-ray radiation hardness of the catalyst is discussed, by utilising the diffraction data collected at the different energies to determine a dose limit, which is often considered in protein crystallography and typically overlooked in small molecule crystallography. This work not only gives fundamental insight into how damage manifests in this organometallic catalyst, but will encourage careful consideration of experimental X-ray parameters before conducting diffraction on similar radiation-sensitive organometallic materials.

Negative X-ray expansion in cadmium cyanide.

Cadmium cyanide, Cd(CN)2, is a flexible coordination polymer best studied for its strong and isotropic negative thermal expansion (NTE) effect. Here we show that this NTE is actually X-ray-exposure dependent: Cd(CN)2 contracts not only on heating but also on irradiation by X-rays. This behaviour contrasts that observed in other beam-sensitive materials, for which X-ray exposure drives lattice expansion. We call this effect 'negative X-ray expansion' (NXE) and suggest its origin involves an interaction between X-rays and cyanide 'flips'; in particular, we rule out local heating as a possible mechanism. Irradiation also affects the nature of a low-temperature phase transition. Our analysis resolves discrepancies in NTE coefficients reported previously on the basis of X-ray diffraction measurements, and we establish the 'true' NTE behaviour of Cd(CN)2 across the temperature range 150-750 K. The interplay between irradiation and mechanical response in Cd(CN)2 highlights the potential for exploiting X-ray exposure in the design of functional materials.

Structural and Electronic Effects of X-ray Irradiation on Prototypical [M(COD)Cl]2 Catalysts.

X-ray characterization techniques are invaluable for probing material characteristics and properties, and have been instrumental in discoveries across materials research. However, there is a current lack of understanding of how X-ray-induced effects manifest in small molecular crystals. This is of particular concern as new X-ray sources with ever-increasing brilliance are developed. In this paper, systematic studies of X-ray-matter interactions are reported on two industrially important catalysts, [Ir(COD)Cl]2 and [Rh(COD)Cl]2, exposed to radiation in X-ray diffraction (XRD) and X-ray photoelectron spectroscopy (XPS) experiments. From these complementary techniques, changes to structure, chemical environments, and electronic structure are observed as a function of X-ray exposure, allowing comparisons of stability to be made between the two catalysts. Radiation dose is estimated using recent developments to the RADDOSE-3D software for small molecules and applied to powder XRD and XPS experiments. Further insights into the electronic structure of the catalysts and changes occurring as a result of the irradiation are drawn from density functional theory (DFT). The techniques combined here offer much needed insight into the X-ray-induced effects in transition-metal catalysts and, consequently, their intrinsic stabilities. There is enormous potential to extend the application of these methods to other small molecular systems of scientific or industrial relevance.

Insights into the Mechanochemical Synthesis of MOF-74.

Mechanochemical synthesis has recently emerged as a scalable "green" approach for the preparation of MOFs, but current understanding of the underlying reaction mechanisms is limited. In this work, an investigation of the reaction pathway of the mechanochemical synthesis of MOF-74 from ZnO and 2,5-dihydroxyterephthalic acid (H4HDTA), using DMF as a liquid additive, is presented. The complex reaction pathway involves the formation of four short-lived intermediate phases, prior to the crystallization of MOF-74. The crystal structures of three of these intermediates have been determined using a combination of single-crystal and powder X-ray diffraction methods and are described here. The initial stages of the reaction are very fast, with a DMF solvate of H4HDTA forming after only 2 min of milling. This is followed by crystallization, after only 4 min of milling, of a triclinic one-dimensional coordination polymer, Zn(H2DHTA)(DMF)2(H2O)2, which converts into a monoclinic polymorph on additional milling. Highly crystalline MOF-74 appears after prolonged milling, for at least 70 min.

Cation Ordering and Exsolution in Copper-Containing Forms of the Flexible Zeolite Rho (Cu,M-Rho; M=H, Na) and Their Consequences for CO2 Adsorption.

The flexibility of the zeolite Rho framework offers great potential for tunable molecular sieving. The fully copper-exchanged form of Rho and mixed Cu,H- and Cu,Na-forms have been prepared. EPR spectroscopy reveals that Cu2+ ions are present in the dehydrated forms and Rietveld refinement shows these prefer S6R sites, away from the d8r windows that control diffusion. Fully exchanged Cu-Rho remains in an open form upon dehydration, the d8r windows remain nearly circular and the occupancy of window sites is low, so that it adsorbs CO2 rapidly at room temperature. Breakthrough tests with 10 % CO2 /40 % CH4 mixtures show that Cu4.9 -Rho is able to produce pure methane, albeit with a relatively low capacity at this pCO2 due to the weak interaction of CO2 with Cu cations. This is in strong contrast to Na-Rho, where cations in narrow elliptical window sites enable CO2 to be adsorbed with high selectivity and uptake but too slowly to enable the production of pure methane in similar breakthrough experiments. A series of Cu,Na-Rho materials was prepared to improve uptake and selectivity compared to Cu-Rho, and kinetics compared to Na-Rho. Remarkably, Cu,Na-Rho with >2 Cu cations per unit cell exhibited exsolution, due to the preference of Na cations for narrow S8R sites in distorted Rho and of Cu cations for S6R sites in the centric, open form of Rho. The exsolved Cu,Na-Rho showed improved performance in CO2 /CH4 breakthrough tests, producing pure CH4 with improved uptake and CO2 /CH4 selectivity compared to that of Cu4.9 -Rho.

Compositional flexibility in Li-N-H materials: implications for ammonia catalysis and hydrogen storage.

Li-N-H materials, particularly lithium amide and lithium imide, have been explored for use in a variety of energy storage applications in recent years. Compositional variation within the parent lithium imide, anti-fluorite crystal structure has been related to both its facile storage of hydrogen and impressive catalytic performance for the decomposition of ammonia. Here, we explore the controlled solid-state synthesis of Li-N-H solid-solution anti-fluorite structures ranging from amide-dominated (Li4/3(NH2)2/3(NH)1/3 or Li1.333NH1.667) through lithium imide to majority incorporation of lithium nitride-hydride (Li3.167(NH)0.416N0.584H0.584 or Li3.167NH). Formation of these solid solutions is demonstrated to cause significant changes to the thermal stability and ammonia reactivity of the samples, highlighting the potential use of compositional variation to control the properties of the material in gas storage and catalytic applications.

Discovery of a Low Thermal Conductivity Oxide Guided by Probe Structure Prediction and Machine Learning.

We report the aperiodic titanate Ba10 Y6 Ti4 O27 with a room-temperature thermal conductivity that equals the lowest reported for an oxide. The structure is characterised by discontinuous occupancy modulation of each of the sites and can be considered as a quasicrystal. The resulting localisation of lattice vibrations suppresses phonon transport of heat. This new lead material for low-thermal-conductivity oxides is metastable and located within a quaternary phase field that has been previously explored. Its isolation thus requires a precisely defined synthetic protocol. The necessary narrowing of the search space for experimental investigation was achieved by evaluation of titanate crystal chemistry, prediction of unexplored structural motifs that would favour synthetically accessible new compositions, and assessment of their properties with machine-learning models.

Refinement of pore size at sub-angstrom precision in robust metal-organic frameworks for separation of xylenes.

The demand for xylenes is projected to increase over the coming decades. The separation of xylene isomers, particularly p- and m-xylenes, is vital for the production of numerous polymers and materials. However, current state-of-the-art separation is based upon fractional crystallisation at 220 K which is highly energy intensive. Here, we report the discrimination of xylene isomers via refinement of the pore size in a series of porous metal-organic frameworks, MFM-300, at sub-angstrom precision leading to the optimal kinetic separation of all three xylene isomers at room temperature. The exceptional performance of MFM-300 for xylene separation is confirmed by dynamic ternary breakthrough experiments. In-depth structural and vibrational investigations using synchrotron X-ray diffraction and terahertz spectroscopy define the underlying host-guest interactions that give rise to the observed selectivity (p-xylene < o-xylene < m-xylene) and separation factors of 4.6-18 for p- and m-xylenes.

In-situ Electrochemical X-ray Diffraction: A Rigorous Method to Navigate within Phase Diagrams Reveals ß-Fe1+x Se as Superconductor for All x.

We report the precise postsynthetic control of the composition of ß-Fe1+x Se by electrochemistry with simultaneous tracking of the associated structural changes via in situ synchrotron X-ray diffraction. We access the full phase width of 0.01

Inorganic co-crystal formation and thermal disproportionation in a dicyanometallate 'superperovskite'.

We report the synthesis, crystal structure, and thermally-driven phase transformation of the dicyanometallate superperovskite co-crystal [NBu4]Mn[Au(CN)2]3·[NBu4]ClO4. This phase is understandable in terms of the conventional ABX3 perovskite structure type, but with the NBu4+ A-site cation displaced onto the perovskite cage face and 1-dimensional AX' chains included within framework pores opened up by these displacements. On heating to 380 K, the co-crystal disproportionates into its two inorganic components: a bcs-structured ABX3 phase and [NBu4]ClO4. This system illustrates a new type of structural and phase complexity accessible to dicyanometallate perovskites.

Post-synthetic modulation of the charge distribution in a metal-organic framework for optimal binding of carbon dioxide and sulfur dioxide.

Modulation of pore environment is an effective strategy to optimize guest binding in porous materials. We report the post-synthetic modification of the charge distribution in a charged metal-organic framework, MFM-305-CH3, [Al(OH)(L)]Cl, [(H2L)Cl = 3,5-dicarboxy-1-methylpyridinium chloride] and its effect on guest binding. MFM-305-CH3 shows a distribution of cationic (methylpyridinium) and anionic (chloride) centers and can be modified to release free pyridyl N-centres by thermal demethylation of the 1-methylpyridinium moiety to give the neutral isostructural MFM-305. This leads simultaneously to enhanced adsorption capacities and selectivities (two parameters that often change in opposite directions) for CO2 and SO2 in MFM-305. The host-guest binding has been comprehensively investigated by in situ synchrotron X-ray and neutron powder diffraction, inelastic neutron scattering, synchrotron infrared and 2H NMR spectroscopy and theoretical modelling to reveal the binding domains of CO2 and SO2 in these materials. CO2 and SO2 binding in MFM-305-CH3 is shown to occur via hydrogen bonding to the methyl and aromatic-CH groups, with a long range interaction to chloride for CO2. In MFM-305 the hydroxyl, pyridyl and aromatic C-H groups bind CO2 and SO2 more effectively via hydrogen bonds and dipole interactions. Post-synthetic modification via dealkylation of the as-synthesised metal-organic framework is a powerful route to the synthesis of materials incorporating active polar groups that cannot be prepared directly.

Unexpected behaviour in derivatives of Barluenga's reagent, Hal(Coll)2X (Coll = 2,4,6-trimethyl pyridine, collidine; Hal = I, Br; X = PF6, ClO4 & BF4).

For the collidine analogues of Barluenga's Reagent (IPy2BF4) reported, a flat cation is necessary for the generation of a modulated phase, in keeping with the "Ratchet Model" theory [Kim et al., Crystal Growth & Design, 2014, 14, 6294]. Attempts to study "diffuse modulation" in Br(Coll)2ClO4 have shown that these non-Bragg features disappear very rapidly on exposure to synchrotron radiation, an effect thought to be caused by the radiation damage disrupting the lattice vibrations that cause the modulation.

A slow-cooling-rate in situ cell for long-duration studies of mineral precipitation in cold aqueous environments on Earth and other planetary bodies.

Liquid oceans and ice caps, along with ice crusts, have long been considered defining features of the Earth, but space missions and observations have shown that they are in fact common features among many of the solar system's outer planets and their satellites. Interactions with rock-forming materials have produced saline oceans not dissimilar in many respects to those on Earth, where mineral precipitation within frozen seawater plays a significant role in both determining global properties and regulating the environment in which a complex ecosystem of extremophiles exists. Since water is considered an essential ingredient for life, the presence of oceans and ice on other solar system bodies is of great astrobiological interest. However, the details surrounding mineral precipitation in freezing environments are still poorly constrained, owing to the difficulties of sampling and ex situ preservation for laboratory analysis, meaning that predictive models have limited empirical underpinnings. To address this, the design and performance characterization of a transmission-geometry sample cell for use in long-duration synchrotron X-ray powder diffraction studies of in situ mineral precipitation from aqueous ice-brine systems are presented. The cell is capable of very slow cooling rates (e.g. 0.3°C per day or less), and its performance is demonstrated with the results from a year-long study of the precipitation of the hydrated magnesium sulfate phase meridianiite (MgSO4·11H2O) from the MgSO4-H2O system. Evidence from the Mars Rover mission suggests that this hydrated phase is widespread on the present-day surface of Mars. However, as well as the predicted hexagonal ice and meridianiite phases, an additional hydrated sulfate phase and a disordered phase are observed.

Bulk phase behavior of lithium imide-metal nitride ammonia decomposition catalysts.

Lithium imide is a promising new catalyst for the production of hydrogen from ammonia. Its catalytic activity has been reported to be significantly enhanced through its use as a composite with various transition metal nitrides. In this work, two of these composite catalysts (with manganese nitride and iron nitride) were examined using in situ neutron and X-ray powder diffraction experiments in order to explore the bulk phases present during ammonia decomposition. Under such conditions, the iron composite was found to be a mixture of lithium imide and iron metal, while the manganese composite contained lithium imide and manganese nitride at low temperatures, and a mixture of lithium imide and two ternary lithium-manganese nitrides (LixMn2-xN and a small proportion of Li7MnN4) at higher temperatures. The results indicate that the bulk formation of a ternary nitride is not necessary for ammonia decomposition in lithium imide-transition metal catalyst systems.

Ammonia Storage by Reversible Host-Guest Site Exchange in a Robust Metal-Organic Framework.

MFM-300(Al) shows reversible uptake of NH3 (15.7 mmol g-1 at 273 K and 1.0 bar) over 50 cycles with an exceptional packing density of 0.62 g cm-3 at 293 K. In situ neutron powder diffraction and synchrotron FTIR micro-spectroscopy on ND3 @MFM-300(Al) confirms reversible H/D site exchange between the adsorbent and adsorbate, representing a new type of adsorption interaction.

Elements of fractal geometry in the 1H NMR spectrum of a copolymer intercalation-complex: identification of the underlying Cantor set.

Sequence-selective intercalation of pyrene into the chain-folds of a random, binary copolyimide under fast-exchange conditions results in the development of self-similar structure in the diimide region of the 1H NMR spectrum. The resulting spectrum can be described by the mathematics of fractals, an approach that is rationalised in terms of a dynamic summation of ring-current shielding effects produced by pyrene molecules intercalating into the chain at progressively greater distances from each "observed" diimide residue. The underlying set of all such summations is found to be a defined mathematical fractal namely the fourth-quarter Cantor set, within which the observed spectrum is embedded. The pattern of resonances predicted by a geometric construction of the fourth-quarter Cantor set agrees well with the observed spectrum.

Impact of partial interpenetration in a hybrid ultramicroporous material on C2H2/C2H4 separation performance.

Phases of a 2-fold pcu hybrid ultramicroporous material (HUM), SIFSIX-14-Cu-i, exhibiting 99%, 93%, 89%, and 70% partial interpenetration have been obtained. 1 : 99 C2H2/C2H4 gas separation studies reveal that as the proportion of interpenetrated component decreases, so does the separation performance.

Decarboxylation of Lactones over Zn/ZSM-5: Elucidation of the Structure of the Active Site and Molecular Interactions.

Herein, we report the catalytic decarboxylation of γ-valerolactone (GVL) over Zn/ZSM-5 to butene, followed by aromatization at high yield with co-feeding of water. An evaluation of the catalytic performance after prolonged periods of time showed that a water molecule is essential to maintain the decarboxylation and aromatization activities and avoid rapid catalyst deactivation. Synchrotron X-ray powder diffraction and Rietveld refinement were then used to elucidate the structures of adsorbed GVL and immobilized Zn species in combination with EXAFS and NMR spectroscopy. A new route for the cooperative hydrolysis of GVL by framework Zn-OH and Brønsted acidic sites to butene and then to aromatic compounds has thus been demonstrated. The structures and fundamental pathways for the nucleophilic attack of terminal Zn-OH sites are comparable to those of Zn-containing enzymes in biological systems.