Your browser doesn't support javascript.
loading
Show: 20 | 50 | 100
Results 1 - 6 de 6
Filter
1.
Arthrosc Tech ; 12(10): e1721-e1725, 2023 Oct.
Article in English | MEDLINE | ID: mdl-37942112

ABSTRACT

Treatment of osteochondritis dissecans (OCD) lesions poses a significant challenge for orthopaedic surgeons and can cause debilitating limitations on the activity of patients. Timing of intervention, surgical technique, and selection of graft when needed are all key elements of treatment that need to be considered carefully and discussed with patients. Primary fixation of an OCD fragment with intact subchondral bone has been shown to be beneficial in some cases. There is limited literature, however, on how to approach large chondral lesions in young patients without a large subchondral base attached to the fragment. Treatment of large OCD lesions of the knee with an all-arthroscopic approach provides several benefits, including limited dissection for exposure, improved ability to assess the stability of the OCD lesion during articulation after fixation, and an expedited recovery compared to an open approach. The purpose of this technical note is to detail a technique of performing an all-arthroscopic bone grafting and primary fixation of a medial femoral condyle OCD lesion.

2.
Article in English | MEDLINE | ID: mdl-36497878

ABSTRACT

INTRODUCTION AND OBJECTIVE: Limited data exists analyzing disparities in diagnosis regarding primary bone neoplasms (PBN). The objective of our study was to determine if there is an association between race/ethnicity and advanced stage of diagnosis of PBN. METHODS: This population-based retrospective cohort study included patient demographic and health information extracted from the National Cancer Institute Surveillance, Epidemiology, and End Results Program (SEER). The main exposure variable was race/ethnicity categorized as non-Hispanic white (NH-W), non-Hispanic black (NH-B), non-Hispanic Asian Pacific Islander (NH-API), and Hispanic. The main outcome variable was advanced stage at diagnosis. Age, sex, tumor grade, type of bone cancer, decade, and geographic location were co-variates. Unadjusted and adjusted logistic regression analyses were conducted calculating odds ratios (OR) and corresponding 95% confidence intervals. RESULTS: Race/ethnicity was not statistically significantly associated with advanced-stage disease. Adjusted OR for NH-B was 0.94 (95% CI: 0.78-1.38), for NH-API 1.07 (95% CI: 0.86-1.33) and for Hispanic 1.03 (95% CI: 0.85-1.25). CONCLUSIONS: The lack of association between race and advanced stage of disease could be due to high availability and low cost for initial management of bone malignancies though plain radiographs. Future studies may include socioeconomic status and insurance coverage as covariates in the analysis.


Subject(s)
Bone Neoplasms , Ethnicity , Humans , United States , Retrospective Studies , Neoplasm Staging , Hispanic or Latino , Bone Neoplasms/diagnosis , Bone Neoplasms/epidemiology
3.
Clin Spine Surg ; 32(10): E469-E473, 2019 12.
Article in English | MEDLINE | ID: mdl-31490242

ABSTRACT

STUDY DESIGN: This is a level III retrospective study. OBJECTIVE: The authors aim to review the outcomes and complications of ball and socket total disk replacements (TDRs). SUMMARY OF BACKGROUND DATA: TDR is a motion-preserving technique that closely reproduces physiologic kinematics of the cervical spine. However, heterotopic ossification and spontaneous fusion after implantation of the total cervical disk have been reported in several studies to decrease the range of motion postulated by in vitro and in vivo biomechanical studies. METHODS: The medical records of 117 consecutive patients undergoing cervical TDR over a 5-year period with Mobi-C, Prodisc-C, Prestige LP, and Secure-C implants were followed. Outcomes assessed included Visual Analogue Scale neck and arm and Neck Disability Index scores. The radiographic assessment looked at heterotopic ossification leading to fusion and complication rates. RESULTS: Of the 117 patients that underwent TDR, 56% were male with the group's mean age being 46.2±10.3 years and body mass index of 18.9±13.6 kg/m. The longest follow-up was 5 years with Prodisc-C group, with overall fusion noted in 16% of patients. One patient was also noted to have fusion which was not seen radiographically but noted intraoperatively for adjacent segment disease. There has been no demonstrable radiographic fusion seen in the Prestige LP group, however, the follow-up has only been 12-24 months for this group. CONCLUSION: In this study, we have demonstrated radiographic fusion anterior to the ball and socket TDR as well as the uncovertebral joint. We postulate that with the use of a mobile core disk there is an increased potential for fusion leading to a nonfunctional disk replacement.


Subject(s)
Ossification, Heterotopic/diagnostic imaging , Ossification, Heterotopic/etiology , Spinal Fusion , Total Disc Replacement/adverse effects , Disability Evaluation , Female , Humans , Incidence , Male , Middle Aged , Visual Analog Scale
4.
Tech Vasc Interv Radiol ; 22(1): 14-20, 2019 Mar.
Article in English | MEDLINE | ID: mdl-30765070

ABSTRACT

With the advances in affordable three-dimensional (3D) printing technology, 3D reconstruction and patient-specific 3D printed models are establishing a crucial role in the field of medicine for both educational purposes and procedural planning. 3D printed models provide physicians with increased 3D perception and tactile feedback, and enable a team-based approach to operational planning. However, performing an effective 3D reconstruction requires an in-depth understanding of the software features to accurately segment and reconstruct the human anatomy of interest from preacquired image data from multiple modalities such as computer tomography, 3D angiography and magnetic resonance imaging, and the different 3D printers/materials available in the market today. Increased understanding of this technology may benefit radiologists by developing techniques and tricks specific to interventional radiology and establishing a criterion to determine when to use these. Thus, the purpose of this manuscript is to provide physicians with an update on currently available 3D reconstruction software as well as printers and materials. Our initial experience using this technology is introduced based on a specific case of developing a 3D printed aorta for a patient with severe stenosis of the abdominal aorta.


Subject(s)
Models, Cardiovascular , Patient-Specific Modeling , Printing, Three-Dimensional , Radiography, Interventional/methods , Radiology, Interventional/methods , Aorta, Abdominal/diagnostic imaging , Aorta, Abdominal/surgery , Aortic Diseases/diagnostic imaging , Aortic Diseases/surgery , Aortography/methods , Arterial Occlusive Diseases/diagnostic imaging , Arterial Occlusive Diseases/surgery , Computed Tomography Angiography , Constriction, Pathologic , Humans , Magnetic Resonance Angiography , Models, Anatomic , Radiographic Image Interpretation, Computer-Assisted
5.
J Orthop ; 15(4): 935-939, 2018 Dec.
Article in English | MEDLINE | ID: mdl-30190635

ABSTRACT

BACKGROUND: The authors aim to demonstrate the feasibility, outcomes and fusion rate of a standalone PEEK cage in the outpatient setting. METHODS: 48 consecutive patients undergoing standalone ACDF (S-ACDF) (Group 1) were compared to control group of 49 patients who had ACDF with ACP (Group 2). RESULTS: Analysis of follow-up at the one year period postoperative outcomes between groups 1 and 2 demonstrated no intergroup statistical significant difference in VAS neck, arm and NDI scores p = 0.414, 0.06 and p = 0.328 respectively. CONCLUSION: We conclude that S-ACDF can be safely done in an ambulatory surgery center with satisfactory clinical and patient-reported outcomes.

6.
J Spine Surg ; 4(4): 696-701, 2018 Dec.
Article in English | MEDLINE | ID: mdl-30714000

ABSTRACT

BACKGROUND: Radiation dose continues to be a concern especially in the field of spine surgery, where anterior and posterior instrumentation is frequently utilized to treat multiple pathologies. The authors aim to demonstrate the feasibility of decreasing the radiation dose in standalone anterior cervical discectomy and fusion (ACDF). METHODS: Standalone ACDF (S-ACDF) with 48 consecutive patients (Group 1) with a comparison control group with ACDF with an anterior cervical plate (ACP) of 49 patients (Group 2). Fluoroscopy was performed for positioning, identification of level, placement of the implant, each screw, final AP and lateral images for the first 20 patients in Group 1. Screw placement could then be performed confidently based on cosine rule of cosine (Ѳ) = adj/hyp. RESULTS: Forty-eight patients in Group 1 (S-ACDF) and 49 patients in Group 2 (ACDF-ACP). Statistical significance not demonstrated for age, BMI or gender, P=0.691, 0.947 and 0.286 respectively. Mean radiation dose in group 1 of 17.9±6.6 mAs and 0.8±0.3 mSv was significantly less compared to group 2 which was 29.8±5.4 and 1.3±0.2 mSv, P<0.001. The average radiation dose for single-level fusion in Group 1 was 12.5±3.5 mAs and 0.5±0.1 mSv this is compared to Group 2 of 27.8±3.9 mAs and 1.2±0.2 mSv, P=0.001. The average radiation dose for two level fusion in Group 1 was 22.2±5.1 mAs and 0.9±0.2 mSv this is compared to Group 2 of 33.9±6.0 and 1.4±0.3 mSv, P=0.001. CONCLUSIONS: In the outpatient setting, S-ACDF has shown a statistically significant intergroup difference in overall radiation dose, as well as single and two-level fusions, (P<0.001). We conclude that S-ACDF can decrease overall radiation exposure to patients.

SELECTION OF CITATIONS
SEARCH DETAIL
...