Heterogeneous intercalated metal-organic framework active materials for fast-charging non-aqueous Li-ion capacitors.

Intercalated metal-organic frameworks (iMOFs) based on aromatic dicarboxylate are appealing negative electrode active materials for Li-based electrochemical energy storage devices. They store Li ions at approximately 0.8 V vs. Li/Li+ and, thus, avoid Li metal plating during cell operation. However, their fast-charging capability is limited. Here, to circumvent this issue, we propose iMOFs with multi-aromatic units selected using machine learning and synthesized via solution spray drying. A naphthalene-based multivariate material with nanometric thickness allows the reversible storage of Li-ions in non-aqueous Li metal cell configuration reaching 85% capacity retention at 400 mA g-1 (i.e., 30 min for full charge) and 20 °C compared to cycling at 20 mA g-1 (i.e., 10 h for full charge). The same material, tested in combination with an activated carbon-based positive electrode, enables a discharge capacity retention of about 91% after 1000 cycles at 0.15 mA cm-2 (i.e., 2 h for full charge) and 20 °C. We elucidate the charge storage mechanism and demonstrate that during Li intercalation, the distorted crystal structure promotes electron delocalization by controlling the frame vibration. As a result, a phase transition suppresses phase separation, thus, benefitting the electrode's fast charging behavior.

How Fluorine Introduction Solves the Spinel Transition, a Fundamental Problem of Mn-Based Positive Electrodes.

In pursuit of high-capacity Mn-based oxides as positive electrode materials for lithium-ion batteries, the changes in the charge-discharge curve due to the spinel transition still stand in the way of the cycling stability. We found in this study that Li1.12Mn0.74O1.60F0.40 (LMOF05) positive electrodes with a loose-crystalline rock salt structure (LCRS), in which F is placed near Mn, show a stable and high capacity (300 mA h g-1, 952 W h kg-1) with little change in the charge-discharge curve. We demonstrated by F K-edge soft X-ray absorption spectroscopy and X-ray diffraction (XRD) that a part of F in the LCRS positive electrode forms F-Mn bonds. Operando XRD/X-ray absorption fine structure measurements revealed the lattice size and Mn surrounding environment during charge/discharge of F-containing LCRS positive electrodes (LMOF05), LCRS-LiMnO2 (LMO), and a spinel-like Li1.1Al0.1Mn1.8O4 positive electrode (SPINEL). Micro- and macroscopic structural changes indicate how the introduction of F suppresses the local spinel transition in Mn-based positive electrodes. These findings should be an effective tool for applying Co-free positive electrode materials for lithium-ion batteries.

Multifunctional Alloys Obtained via a Dislocation-Free Plastic Deformation Mechanism.

We describe a group of alloys that exhibit "super" properties, such as ultralow elastic modulus, ultrahigh strength, super elasticity, and super plasticity, at room temperature and that show Elinvar and Invar behavior. These "super" properties are attributable to a dislocation-free plastic deformation mechanism. In cold-worked alloys, this mechanism forms elastic strain fields of hierarchical structure that range in size from the nanometer scale to several tens of micrometers. The resultant elastic strain energy leads to a number of enhanced material properties.