UV-VIS imaging-based investigation of API concentration fluctuation caused by the sticking behaviour of pharmaceutical powder blends.

Surface powder sticking in pharmaceutical mixing vessels poses a risk to the uniformity and quality of drug formulations. This study explores methods for evaluating the amount of pharmaceutical powder mixtures adhering to the metallic surfaces. Binary powder blends consisting of amlodipine and microcrystalline cellulose (MCC) were used to investigate the effect of the mixing order on the adherence to the vessel wall. Elevated API concentrations were measured on the wall and within the dislodged material from the surface, regardless of the mixing order of the components. UV imaging was used to determine the particle size and the distribution of the API on the metallic surface. The results were compared to chemical maps obtained by Raman chemical imaging. The combination of UV and VIS imaging enabled the rapid acquisition of chemical maps, covering a substantially large area representative of the analysed sample. UV imaging was also applied in tablet inspection to detect tablets that fail to meet the content uniformity criteria. The results present powder adherence as a possible source of poor content uniformity, highlighting the need for 100% inspection of pharmaceutical products to ensure product quality and safety.

Effects of omitting titanium dioxide from the film coating of a pharmaceutical tablet - An industrial case study of attempting to comply with EU regulation 2022/63.

Recently, concerns have been raised about the safety of titanium dioxide (TiO2), a commonly used component of pharmaceutical film coatings. The European Union has recently prohibited the application of this material in the food industry, and it is anticipated that the same will happen in the pharmaceutical industry. For this reason, pharmaceutical manufacturers have to consider the possible impact of removing TiO2 from the film coating of tablets. In this paper, we present a case study of a commercially produced tablet where the film coating containing TiO2 was replaced with a coating using calcium carbonate (CaCO3) or with a transparent coating. The performance of the coatings was compared by measuring the moisture absorption rate and the dissolution profile of the tablets. In these regards, there were negligible differences between the coating types. The tablets contained a highly photosensitive drug, the ability of the coatings to protect the drug was evaluated through environmental stability and photostability measurements. The HPLC results showed that the inclusion of TiO2 does not provide additional benefits, when humidity and thermal stress is applied, however its role was vital in protecting the drug from external light. There were several decomposition products which appeared in large quantities when TiO2 was missing from the coating. These results imply that photosensitivity is an issue, replacing TiO2 will be challenging, though its absence can be tolerated when the drug does not need to be protected from light.

Development of a PAT platform for the prediction of granule tableting properties.

In this work, the feasibility of implementing a process analytical technology (PAT) platform consisting of Near Infrared Spectroscopy (NIR) and particle size distribution (PSD) analysis was evaluated for the prediction of granule downstream processability. A Design of Experiments-based calibration set was prepared using a fluid bed melt granulation process by varying the binder content, granulation time, and granulation temperature. The granule samples were characterized using PAT tools and a compaction simulator in the 100-500 kg load range. Comparing the systematic variability in NIR and PSD data, their complementarity was demonstrated by identifying joint and unique sources of variation. These particularities of the data explained some differences in the performance of individual models. Regarding the fusion of data sources, the input data structure for partial least squares (PLS) based models did not significantly impact the predictive performance, as the root mean squared error of prediction (RMSEP) values were similar. Comparing PLS and artificial neural network (ANN) models, it was observed that the ANNs systematically provided superior model performance. For example, the best tensile strength, ejection stress, and detachment stress prediction with ANN resulted in an RMSEP of 0.119, 0.256, and 0.293 as opposed to the 0.180, 0.395, and 0.430 RMSEPs of the PLS models, respectively. Finally, the robustness of the developed models was assessed.

Image-based simultaneous particle size distribution and concentration measurement of powder blend components with deep learning and machine vision.

This work presents a system, where deep learning was used on images captured with a digital camera to simultaneously determine the API concentration and the particle size distribution (PSD) of two components of a powder blend. The blend consisted of acetylsalicylic acid (ASA) and calcium hydrogen phosphate (CHP), and the predicted API concentration was found corresponding with the HPLC measurements. The PSDs determined with the method corresponded with those measured with laser diffraction particle size analysis. This novel method provides fast and simple measurements and could be suitable for detecting segregation in the powder. By examining the powders discharged from a batch blender, the API concentrations at the top and bottom of the container could be measured, yielding information about the adequacy of the blending and improving the quality control of the manufacturing process.

Comparing the Performance of Raman and Near-Infrared Imaging in the Prediction of the In Vitro Dissolution Profile of Extended-Release Tablets Based on Artificial Neural Networks.

In this work, the performance of two fast chemical imaging techniques, Raman and near-infrared (NIR) imaging is compared by utilizing these methods to predict the rate of drug release from sustained-release tablets. Sustained release is provided by adding hydroxypropyl methylcellulose (HPMC), as its concentration and particle size determine the dissolution rate of the drug. The chemical images were processed using classical least squares; afterwards, a convolutional neural network was applied to extract information regarding the particle size of HPMC. The chemical images were reduced to an average HPMC concentration and a predicted particle size value; these were used as inputs in an artificial neural network with a single hidden layer to predict the dissolution profile of the tablets. Both NIR and Raman imaging yielded accurate predictions. As the instrumentation of NIR imaging allows faster measurements than Raman imaging, this technique is a better candidate for implementing a real-time technique. The introduction of chemical imaging in the routine quality control of pharmaceutical products would profoundly change quality assurance in the pharmaceutical industry.

In-line particle size measurement during granule fluidization using convolutional neural network-aided process imaging.

This paper presents a machine learning-based image analysis method to monitor the particle size distribution of fluidized granules. The key components of the direct imaging system are a rigid fiber-optic endoscope, a light source and a high-speed camera, which allow for real-time monitoring of the granules. The system was implemented into a custom-made 3D-printed device that could reproduce the particle movement characteristic in a fluidized-bed granulator. The suitability of the method was evaluated by determining the particle size distribution (PSD) of various granule mixtures within the 100-2000 µm size range. The convolutional neural network-based software was able to successfully detect the granules that were in focus despite the dense flow of the particles. The volumetric PSDs were compared with off-line reference measurements obtained by dynamic image analysis and laser diffraction. Similar trends were observed across the PSDs acquired with all three methods. The results of this study demonstrate the feasibility of performing real-time particle size analysis using machine vision as an in-line process analytical technology (PAT) tool.

Convolutional neural network-based evaluation of chemical maps obtained by fast Raman imaging for prediction of tablet dissolution profiles.

In this work, the capabilities of a state-of-the-art fast Raman imaging apparatus are exploited to gain information about the concentration and particle size of hydroxypropyl methylcellulose (HPMC) in sustained release tablets. The extracted information is utilized to predict the in vitro dissolution profile of the tablets. For the first time, convolutional neural networks (CNNs) are used for the processing of the chemical images of HPMC distribution and to directly predict the dissolution profile based on the image. This new method is compared to wavelet analysis, which gives a quantification of the texture of HPMC distribution, carrying information regarding both concentration and particle size. A total of 112 training and 32 validation tablets were used, when a CNN was used to characterize the particle size of HPMC, the dissolution profile of the validation tablets was predicted with an average f2 similarity value of 62.95. Direct prediction based on the image had an f2 value of 54.2, this demonstrates that the CNN is capable of recognizing the patterns in the data on its own. The presented methods can facilitate a better understanding of the manufacturing processes, as detailed information becomes available with fast measurements.

AI-based analysis of in-line process endoscope images for real-time particle size measurement in a continuous pharmaceutical milling process.

This paper presents a case study on the first in-line application of AI-based image analysis for real-time pharmaceutical particle size measurement in a continuous milling process. An AI-based imaging system, which utilises a rigid endoscope, was tested for the real-time particle size measurement of solid NaCl powder used as a model API in the range of 200-1000 µm. After creating a dataset containing annotated images of NaCl particles, it was used to train an AI model for detecting particles and measuring their size. The developed system could analyse overlapping particles without dispersing air, thus broadening its applicability. The performance of the system was evaluated by measuring pre-sifted NaCl samples with the imaging tool, after which it was installed into a continuous mill for in-line particle size measurement of a milling process. By analysing ∼100 particles/s, the system was able to accurately measure the particle size of sifted NaCl samples and detect particle size reduction when applied in the milling process. The Dv50 values and PSDs measured real-time with the AI-based system correlated well with the reference laser diffraction measurements (<6% mean absolute difference over the measured samples). The AI-based imaging system shows great potential for in-line particle size analysis, which, in line with the latest pharmaceutical QC trends, can provide valuable information for process development and control.

Oligonucleotide Formulations Prepared by High-Speed Electrospinning: Maximizing Loading and Exploring Downstream Processability.

The aim of this study was to develop antisense oligonucleotide tablet formulations using high-speed electrospinning. Hydroxypropyl-beta-cyclodextrin (HPßCD) was used as a stabilizer and as an electrospinning matrix. In order to optimize the morphology of the fibers, electrospinning of various formulations was carried out using water, methanol/water (1:1), and methanol as solvents. The results showed that using methanol could be advantageous due to the lower viscosity threshold for fiber formation enabling higher potential drug loadings by using less excipient. To increase the productivity of electrospinning, high-speed electrospinning technology was utilized and HPßCD fibers containing 9.1% antisense oligonucleotide were prepared at a rate of ~330 g/h. Furthermore, to increase the drug content of the fibers, a formulation with a 50% drug loading was developed. The fibers had excellent grindability but poor flowability. The ground fibrous powder was mixed with excipients to improve its flowability, which enabled the automatic tableting of the mixture by direct compression. The fibrous HPßCD-antisense oligonucleotide formulations showed no sign of physical or chemical degradation over the 1-year stability study, which also shows the suitability of the HPßCD matrix for the formulation of biopharmaceuticals. The obtained results demonstrate possible solutions for the challenges of electrospinning such as scale-up and downstream processing of the fibers.

Improvement of drug processability in a connected continuous crystallizer system using formulation additive.

Continuous crystallization in the presence of polymer additives is a promising method to omit some drug formulation steps by improving the technological and also pharmacological properties of crystalline active ingredients. Accordingly, this study focuses on developing an additive-assisted continuous crystallization process using polyvinylpyrrolidone in a connected ultrasonicated plug flow crystallizer and an overflow mixed suspension mixed product removal (MSMPR) crystallizer system. We aimed to improve the flowability characteristics of small, columnar primary plug flow crystallizer-produced acetylsalicylic acid crystals as a model drug by promoting their agglomeration in MSMPR crystallizer with polyvinylpyrrolidone. The impact of the cooling antisolvent crystallization process parameters (temperature, polymer amount, total flow rate) on product quality and quantity was investigated. Finally, a spatially segmented antisolvent dosing method was also evaluated. The developed technology enabled the manufacture of purified, constant quality products in a short startup period, even with an 85% yield. We found that a higher polymer amount (7.5-14%) could facilitate agglomeration resulting in "good" flowability without altering the favorable dissolution characteristics of the primary particles.

Interpretable artificial neural networks for retrospective QbD of pharmaceutical tablet manufacturing based on a pilot-scale developmental dataset.

As the pharmaceutical industry increasingly adopts the Pharma 4.0. concept, there is a growing need to effectively predict the product quality based on manufacturing or in-process data. Although artificial neural networks (ANNs) have emerged as powerful tools in data-rich environments, their implementation in pharmaceutical manufacturing is hindered by their black-box nature. In this work, ANNs were developed and interpreted to demonstrate their applicability to increase process understanding by retrospective analysis of developmental or manufacturing data. The in vitro dissolution and hardness of extended-release, directly compressed tablets were predicted from manufacturing and spectroscopic data of pilot-scale development. The ANNs using material attributes and operational parameters provided better results than using NIR or Raman spectra as predictors. ANNs were interpreted by sensitivity analysis, helping to identify the root cause of the batch-to-batch variability, e.g., the variability in particle size, grade, or substitution of the hydroxypropyl methylcellulose excipient. An ANN-based control strategy was also successfully utilized to mitigate the batch-to-batch variability by flexibly operating the tableting process. The presented methodology can be adapted to arbitrary data-rich manufacturing steps from active substance synthesis to formulation to predict the quality from manufacturing or development data and gain process understanding and consistent product quality.

Evaluation of Different Thermoanalytical Methods for the Analysis of the Stability of Naproxen-Loaded Amorphous Solid Dispersions.

The aim of this research was to investigate three thermoanalytical techniques from the glass transition temperature (Tg) determination point of view. In addition, the examination of the correlation between the measured Tg values and the stability of the amorphous solid dispersions (ASDs) was also an important part of the work. The results showed that a similar tendency of the Tg can be observed in the case of the applied methods. However, Tg values measured by thermally stimulated depolarization currents showed higher deviation from the theoretical calculations than the values measured by modulated differential scanning calorimetry, referring better to the drug-polymer interactions. Indeed, the investigations after the stress stability tests revealed that micro-thermal analysis can indicate the most sensitive changes in the Tg values, better indicating the instability of the samples. In addition to confirming that the active pharmaceutical ingredient content is a crucial factor in the stability of ASDs containing naproxen and poly(vinylpyrrolidone-co-vinyl acetate), it is worthwhile applying orthogonal techniques to better understand the behavior of ASDs. The development of stable ASDs can be facilitated via mapping the molecular mobilities with suitable thermoanalytical methods.

Application of Artificial Neural Networks in the Process Analytical Technology of Pharmaceutical Manufacturing-a Review.

Industry 4.0 has started to transform the manufacturing industries by embracing digitalization, automation, and big data, aiming for interconnected systems, autonomous decisions, and smart factories. Machine learning techniques, such as artificial neural networks (ANN), have emerged as potent tools to address the related computational tasks. These advancements have also reached the pharmaceutical industry, where the Process Analytical Technology (PAT) initiative has already paved the way for the real-time analysis of the processes and the science- and risk-based flexible production. This paper aims to assess the potential of ANNs within the PAT concept to aid the modernization of pharmaceutical manufacturing. The current state of ANNs is systematically reviewed for the most common manufacturing steps of solid pharmaceutical products, and possible research gaps and future directions are identified. In this way, this review could aid the further development of machine learning techniques for pharmaceutical production and eventually contribute to the implementation of intelligent manufacturing lines with automated quality assurance.

Real-time coating thickness measurement and defect recognition of film coated tablets with machine vision and deep learning.

This paper presents a system, where images acquired with a digital camera are coupled with image analysis and deep learning to identify and categorize film coating defects and to measure the film coating thickness of tablets. There were 5 different classes of defective tablets, and the YOLOv5 algorithm was utilized to recognize defects, the accuracy of the classification was 98.2%. In order to characterize coating thickness, the diameter of the tablets in pixels was measured, which was used to measure the coating thickness of the tablets. The proposed system can be easily scaled up to match the production capability of continuous film coaters. With the developed technique, the complete screening of the produced tablets can be achieved in real-time resulting in the improvement of quality control.

Soft sensor for content prediction in an integrated continuous pharmaceutical formulation line based on the residence time distribution of unit operations.

In this study, a concentration predicting soft sensor was achieved based on the Residence Time Distribution (RTD) of an integrated, three-step pharmaceutical formulation line. The RTD was investigated with color-based tracer experiments using image analysis. Twin-screw wet granulation (TSWG) was directly coupled with a horizontal fluid bed dryer and an oscillating mill. Based on integrated measurement, we proved that it is also possible to couple the unit operations in silico. Three surrogate tracers were produced with a coloring agent to investigate the separated unit operations and the solid and liquid inputs of the TSWG. The soft sensor's prediction was compared to validating experiments of a 0.05 mg/g (15% of the nominal) concentration change with High-Performance Liquid Chromatography (HPLC) reference measurements of the active ingredient proving the adequacy of the soft sensor (RMSE < 4%).

UV/VIS imaging-based PAT tool for drug particle size inspection in intact tablets supported by pattern recognition neural networks.

The potential of machine vision systems has not currently been exploited for pharmaceutical applications, although expected to provide revolutionary solutions for in-process and final product testing. The presented paper aimed to analyze the particle size of meloxicam, a yellow model active pharmaceutical ingredient, in intact tablets by a digital UV/VIS imaging-based machine vision system. Two image processing algorithms were developed and coupled with pattern recognition neural networks for UV and VIS images for particle size-based classification of the prepared tablets. The developed method can identify tablets containing finer or larger particles than the target with more than 97% accuracy. Two algorithms were developed for UV and VIS images for particle size analysis of the prepared tablets. According to the applied statistical tests, the obtained particle size distributions were similar to the results of the laser diffraction-based reference method. Digital UV/VIS imaging combined with multivariate data analysis can provide a new non-destructive, rapid, in-line tool for particle size analysis in tablets.

Raman mapping-based non-destructive dissolution prediction of sustained-release tablets.

In this paper, the applicability of Raman chemical imaging for the non-destructive prediction of the in vitro dissolution profile of sustained-release tablets is demonstrated for the first time. Raman chemical maps contain a plethora of information about the spatial distribution and the particle size of the components, compression force and even polymorphism. With proper data analysis techniques, this can be converted into simple numerical information which can be used as input in a machine learning model. In our work, sustained-release tablets using hydroxypropyl methylcellulose (HPMC) as matrix polymer are prepared, the concentration and particle size of this component varied between samples. Chemical maps of HPMC are converted into histograms with two different methods, an approach based on discretizing concentration values and a wavelet analysis technique. These histograms are then subjected to Principal Component Analysis, the score value of the first two principal components was found to represent HPMC content and particle size. These values are used as input in Artificial Neural Networks which are trained to predict the dissolution profile of the tablets. As a result, accurate predictions were obtained for the test tablets (the average f2 similarity value is higher than 59 with both methods). The presented methodology lays the foundations of the analysis of far more extensive datasets acquired with the emerging fast Raman imaging technology.

Real-time amino acid and glucose monitoring system for the automatic control of nutrient feeding in CHO cell culture using Raman spectroscopy.

An innovative, Raman spectroscopy-based monitoring and control system is introduced in this paper for designing dynamic feeding strategies that allow the maintenance of key cellular nutrients at an ideal level in Chinese hamster ovary cell culture. The Partial Least Squares calibration models built for glucose, lactate and 16 (out of 20) individual amino acids had very good predictive power with low root mean square errors values and high square correlation coefficients. The developed models used for real-time measurement of nutrient and by-product concentrations allowed us to gain better insight into the metabolic behavior and nutritional consumption of cells. To establish a more beneficial nutritional environment for the cells, two types of dynamic feeding strategies were used to control the delivery of two-part multi-component feed media according to the prediction of Raman models (glucose or arginine). As a result, instead of high fluctuations, the nutrients (glucose together with amino acids) were maintained at the desired level providing a more balanced environment for the cells. Moreover, the use of amino acid-based feeding control enabled to prevent the excessive nutrient replenishment and was economically beneficial by significantly reducing the amount of supplied feed medium compared to the glucose-based dynamic fed culture.

In-line particle size measurement based on image analysis in a fully continuous granule manufacturing line for rapid process understanding and development.

The present paper serves as a demonstration how an in-line PAT tool can be used for rapid and efficient process development in a fully continuous powder to granule line consisting of an interconnected twin-screw wet granulator, vibrational fluid bed dryer, and a regranulating mill. A new method was investigated for the periodic in-line particle size measurement of high mass flow materials to obtain real-time particle size data of the regranulated product. The system utilises a vibratory feeder with periodically altered feeding intensity in order to temporarily reduce the mass flow of the material passing in front of the camera. This results in the drastic reduction of particle overlapping in the images, making image analysis a viable tool for the in-line particle size measurement of high mass-flow materials. To evaluate the performance of the imaging system, the effect of several milling settings and the liquid-to-solid ratio was investigated on the product's particle size in the span of a few hours. The particle sizes measured with the in-line system were in accordance with the expected trends as well as with the results of the off-line reference particle size measurements. Based on the results, the in-line imaging system can serve as a PAT tool to obtain valuable real-time information for rapid process development or quality assurance.

Development of fast-dissolving dosage forms of curcuminoids by electrospinning for potential tumor therapy application.

Curcuminoids (CUs) of antitumor and various other potential biological activities have extremely low water solubility therefore special formulation was elaborated. New fast dissolving reconstitution dosage forms of four CUs were prepared as fibrous form of 2-hydroxypropyl-ß-cyclodextin (HP-ß-CD). In the electrospinning process HP-ß-CD could act both as solubilizer and fiber-forming agent. The solubilization efficiency of the CU-HP-ß-CD systems was determined with phase-solubility measurements. The electrospun CUs were amorphous and uniformly distributed in the fibers according to XRD analysis and Raman mappings. The fibrous final products had fast (<5 min) and complete dissolution. In typical iv. infusion reconstitution volume (20 mL) fibers containing 40-80 mg of CU could be dissolved, which is similar to the currently proposed dose (<120 mg/m2). The in vitro cytostatic effect data showed that the antitumor activity of the CU-HP-ß-CD complexes was similar or better compared to the free APIs.