ABSTRACT
Five synchrotron radiation beam lines are commissioned and now under regular operation at the Synchrotron Radiation Source, Indus-2 at Raja Ramanna Centre For Advanced Technology (RRCAT), Indore, India. Nine beam lines are under trial operation, and six beam lines are in the installation stage. In the early phase of installation of beam lines on Indus-2, three bending magnet beam lines, Extended X-ray Absorption Fine Structure (EXAFS, BL-8), Energy Dispersive X-ray Diffraction (EDXRD, BL-11) and Angle Dispersive X-ray Diffraction (ADXRD, BL-12), were installed and commissioned, after approval from Atomic Energy Regulatory Board (AERB), India. These beam lines are pink (BL-8), white (BL-11) and monochromatic (BL-12), which are housed in specially designed shielded hutches. In order to ensure safety of users and other working personnel from ionizing radiations present in these beam lines, several safety systems are incorporated and safety procedures are followed. The paper describes the radiological safety aspects of the three beam lines during its initial commissioning trials and also the measurements on radiation levels carried out in and around the beam line hutches.
Subject(s)
Facility Design and Construction/methods , Radiation Injuries/prevention & control , Radiation Protection/instrumentation , Synchrotrons/instrumentation , Facility Design and Construction/instrumentation , Humans , Risk Assessment , Safety , X-Ray DiffractionABSTRACT
Radiation field during accidental electron beam loss near electron storage rings comprises of high-energy electrons and bremsstrahlung photons. Due to high-energy nature of the radiation, the absorbed dose is expected to build up with depth of the body of an exposed worker and hence absorbed dose measurements in 30 cm water/tissue equivalent phantom is essential. Carrying out the measurements with in such phantoms is not practically feasible for routine applications and hence the use of an equivalent solid material around the dosemeters would be convenient. Monte Carlo calculations have been carried out in order to determine the dose-build-up thickness required in copper and lead, corresponding to the maximum absorbed within 30 cm depth of water in such radiation fields. Equivalent build-up thickness calculated for a case was verified by measurement using an ion chamber detector. The results are found to be in agreement within +/-20%.
Subject(s)
Electrons , Photons , Radiation Monitoring/instrumentation , Aluminum/chemistry , Computer Simulation , Copper/chemistry , Lead/chemistry , Models, Statistical , Monte Carlo Method , Radiation Dosage , Water/chemistryABSTRACT
Conventional radiation monitors have been found to underestimate the personal dose equivalent in the high-energy bremsstrahlung photon radiation fields encountered near electron storage rings. Depth-dose measurements in a water phantom were carried out with a radiation survey meter in the bremsstrahlung photon radiation fields from a 450 MeV electron storage ring to find out the magnitude of the underestimation. Dose equivalent indicated by the survey meter was found to build up with increase in thickness of water placed in front of the meter up to certain depth and then reduce with further increase in thickness. A dose equivalent build up factor was estimated from the measurements. An absorbed dose build up factor in a water phantom was also estimated from calculations performed using the Monte Carlo codes, EGS-4 and EGSnrc. The calculations are found to be in very good agreement with the measurements. The studies indicate inadequacy of commercially available radiation monitors for radiation monitoring within shielded enclosures and in streaming high-energy photon radiation fields from electron storage rings, and the need for proper correction for use in such radiation fields.