A fully digital approach to replacing an obturator prosthesis using a 3D printed closed hollow bulb: Α dental technique.

The replacement of an obturator prosthesis using conventional methods has multiple issues. Standard tessellation language files generated from the superimposition of an accurate intraoral scanning of the maxillary defect and direct data acquisition of the existing hollow bulb obturator can facilitate the precise design of the prosthesis, requiring only minor adjustments. Rapid prototyping manufacturing techniques seem to ensure precise control of the integrity of the prosthetic component completion. The success of the technique is the simplicity and repeatability of designing and fabricating a retrievable and easily repairable obturator.

Clinical parameters that affect performance and patient satisfaction of root-retained overdentures: A systematic review of randomised controlled clinical trials.

OBJECTIVE: To evaluate clinical parameters that affect the performance of root-supported overdentures (ROD) and to identify the possible factors that may affect it. BACKGROUND: ROD still serve as an alternative and successful treatment plan nowadays for partially edentulous patients. Nonetheless, there is not yet conclusive evidence about their clinical evaluation. MATERIALS AND METHODS: A search strategy was developed following a PIO (Population, Intervention, Outcome) framework including an electronic search in the following databases: PubMed, Cochrane Library and Scopus. The systematic search included only randomised controlled clinical trials (RCTs), published until January 2023 in English language and was performed by two independent reviewers. Quality assessment of the included studies was conducted according to the Cochrane Risk of Bias tool. RESULTS: The final selection of studies included 11 RCTs. Clinically relevant variables derived from this search were: Complications, with caries being the most frequently reported, periodontal aspects and bone changes around abutment teeth. Additionally, methods and clinical suggestions for the maintenance of these restorations and patient-related outcomes were assessed. According to the risk of bias assessment, nine studies were considered of high risk, whereas only 2 of low risk. A meta-analysis was not feasible. CONCLUSION: Within the limitations of this systematic review, ROD remain a viable treatment plan, offering better denture stability and bone preservation around abutment teeth and high patient satisfaction. Thorough oral hygiene and regular follow-ups are of utmost importance. Further well-designed RCTs are necessary for firmer conclusions.

Efficiency of Various Tubular Occlusion Agents in Human Dentin after In-Office Tooth Bleaching.

The aim of this laboratory study was to investigate and compare the impact of five desensitizing techniques as a treatment fortooth sensitivity on the exposed dentin after an in-office tooth bleaching procedure. Thirty intact human molars were collected for this investigation. The specimens were obtained by transversely cutting 2.5 mm of the crowns, leading to exposure of the dentin. The specimens were cleaned in an ultrasonic bath and treated initially with EDTA gel 15% for 4 min and then with Opalescence Boost bleaching gel (40% H2O2) for two sets of 20 min. Then, the samples were randomly divided into six groups (n = 5) and received one of the following treatments: Group 1 (no treatment-control group), Group 2 (Emofluor gel-0.4% SnF2), Group 3 (MI Paste-CPP-ACPF), Group 4 (BioMinF paste-calcium phospho-fluoro-silicate), Group 5 (air-abrasion with ProSylc-Bioglass 45S5), and Group 6 (Er,Cr:YSGG laser). Subsequently, each sample was observed utilizing scanning electron microscopy (SEM) in order to detect the rate of occlusion of dentin tubules. SEM-EDS analysis revealed no occlusion of the dentin tubules in the control group, while Groups 2, 4, and 5 presented high effectiveness (>95% percentage of occluded tubules), and Groups 3 and 6 presented lower values (21.6 and 26.8%, respectively). It was concluded that althoughall the tested groups presented higher percentages of occlusion of the dentinal tubules compared to the control group, there were differences in effectiveness among them. The most effective treatments were the daily use of BioMinF paste and SnF2-containing gel, as well as air-abrasion with ProSylc powder.

The clinical performance of bulk-fill versus the incremental layered application of direct resin composite restorations: a systematic review.

OBJECTIVES: To systematically review the scientific evidence comparing the clinical effectiveness of bulk-fill versus incrementally layered conventional resin composites and to evaluate if one method offers clear merits with specific clinical outcomes. MATERIALS AND METHODS: Using relevant mesh terms and pre-established eligibility criteria in PubMed, Embase, Scopus and Web of Science, a thorough scientific search was conducted with an end-date of 30.04.2023. Randomized controlled clinical trials that involved the direct comparison of Class I and Class II resin composite restorations applied using incremental layering techniques versus bulk-filled in permanent teeth with an observation period of at least six months were considered. To evaluate the bias risk of the finalized records, a revised version of the Cochrane risk-of-bias tool for randomized trials was implemented. RESULTS: Out of the 1445 records determined, 18 eligible reports were chosen for qualitative analysis. Data obtained was categorized as per, the cavity design, the intervention, the comparator(s), the methods of success/failure assessment, the outcomes, and follow-up. Two studies demonstrated an overall low-risk of bias, fourteen studies raised some concerns, and two studies exhibited high-risk. CONCLUSION: Bulk filled resin composite restorations demonstrated clinical outcomes similar to those of incrementally layered resin composite restorations within a review interval of 6 months to 10 years.

Retentive force variations in three polyamide and a polyetheretherketone denture attachments for implant-supported overdentures: An in vitro study.

STATEMENT OF PROBLEM: The loss in the retentive capability of implant-supported overdenture attachments has been related to the wear of the retentive inserts. Wear of the abutment coating material when following the replacement period for the retentive inserts requires investigation. PURPOSE: The purpose of this in vitro study was to compare the changes in retentive force of 3 polyamide and a polyetheretherketone denture attachments under repeated insertion and removal cycles in wet conditions while following their manufacturers' replacement time recommendations. MATERIAL AND METHODS: Four different denture attachments (LOCKiT, OT-Equator, Ball attachment, and Novaloc) with their retentive inserts were tested. Four implants were embedded into individual acrylic resin blocks, and 10 abutments for each attachment were used. Forty metal housings with their retentive inserts were attached to polyamide screws with autopolymerizing acrylic resin. A customized universal testing machine was used to simulate insertion and removal cycles. The specimens were mounted on a second universal testing machine at 0, 540, 2700, and 5400 cycles, and the maximum retentive force was recorded. The retentive inserts for LOCKiT (light retention), OT-Equator (soft retention), and Ball attachment (soft retention) were replaced every 540 cycles, while the Novaloc (medium retention) attachments were never replaced. All the abutments were weighed with a precision scale at 0, 2700, and 5400 cycles. The surface of every abutment was examined under a stereomicroscope at ×10 magnification. Data were analyzed with descriptive statistics. Two-way repeated measures ANOVA was used to compare the mean retentive force and mean abutment mass of all groups and time evaluation points. Bonferroni corrections were made to adjust for multiple tests (α=.05). RESULTS: The mean retention loss for LOCKiT was 12.6% after 6 months and 45.0% after 5 years of simulated use. The mean retention loss for OT-Equator was 16.0% after 6 months and 50.1% after 5 years of simulated use. The mean retention loss for Ball attachment was 15.3% after 6 months and 39.1% after 5 years of simulated use. The mean retention loss for Novaloc was 31.0% after 6 months and 59.1% after 5 years of simulated use. The mean abutment mass difference was statistically significant (P<.05) for LOCKiT and Ball attachment but not statistically significant (P>.05) for OT-Equator and Novaloc at baseline, 2.5 years, and 5 years. CONCLUSIONS: All tested attachments recorded retention loss under the experimental conditions, even when their manufacturers' recommendations for replacement time for the retentive inserts were followed. Patients should be aware that implant abutments should be replaced after a recommended period since their surfaces also change over time.

Evaluation of Er,Cr:YSGG laser technique for fiber post removal of endodontically treated teeth using micro-computed tomography.

Various clinical techniques such as removal kits, ultrasonic tips, burs, and drills, have been used for fiber post removal in endodontically treated teeth. In most clinical cases, the dental practitioners prefer to use ultrasonic tips, despite the heat generation and the formation of microcracks induced in the radicular dentin. The purpose of this study was to investigate the effectiveness of using erbium, chromium: yttrium-scandium-gallium-garnet (Er,Cr:YSGG) laser (2780 nm) as an alternative fiber post removal technique and to compare it to an ultrasonic method using micro-computed tomography (micro-CT). The operating parameters of the X-ray tube were set to 50 kVp and 300 mA. This approach allowed the generation of 2D lateral projections that were then used to reconstruct the 3D volume in DICOM format. Fiber posts were removed from 20 endodontically treated single-rooted premolars (n = 10) using an ultrasonic vibrator with diamond-coated ultrasonic tip (control method), or Er,Cr:YSGG laser irradiation protocol; average power 2.5 W, repetition rate 20 Hz, pulse duration 140 µs, 40% air and 20% water, and close-contact mode. The number of sections with newly formed microcracks, the loss of dentinal tissue, the amount of the residual resin cement, and the removal time were evaluated for both methods. The data were analyzed using paired t-test, Wilcoxon signed-rank and Mann-Whitney U tests at level of significance a = .05. In the laser-treated group the parameters regarding microcracks formation (21 ± 16) and removal time (4.7 ± 1.1 min) were advantageous compared to the ultrasonic-treated group (42 ± 27 and 9.2 ± 1.0 min, respectively), indicating that Er,Cr:YSGG laser could be an alternative fiber post removal technique.

Effect of tooth brushing simulation on the surface properties of various resin-matrix computer-aided design/computer-aided manufacturing ceramics.

PURPOSE: The purpose was to investigate the alterations in surface properties of different resin-matrix CAD/CAM ceramics following tooth brushing simulation (TBS) and compare them with a direct resin composite and a glass ceramic CAD/CAM material. MATERIALS AND METHODS: Four resin-based CAD/CAM restoratives (Brilliant Crios-BR, Lava™ Ultimate-LV, Grandio Blocs-GR and Shofu Block HC-SH), a leucite-reinforced glass ceramic (IPS Empress® CAD-EC) and a resin composite (Filtek™ Z250-FZ) for direct restorations were tested. In particular, surface loss, hardness, roughness and morphology were investigated utilizing confocal microscopy, scanning electron microscopy and nanoindentation tester. TBS was conducted for 4 × 15 min on the surface of the samples and then the changes in their surface properties were evaluated. RESULTS: After TBS, all the experimental groups exhibited surface loss to different extent. FZ and BR presented the highest surface loss, while EC and GR the lowest (p < 0.05). Regarding surface roughness, all the tested materials exhibited increase after TBS (p < 0.05), except LV (p = 0.099). EC presented the lowest Sa values, while FZ and BR the highest (p < 0.05). Changes in surface morphology were in compliance with the results of surface roughness and also surface hardness was correlated with surface loss. CONCLUSIONS: The tested resin-matrix CAD/CAM ceramic restorative materials showed a competent behavior against abrasive forces applied during TBS. Surface loss and roughness changes were material dependent and superior compared to a resin composite for direct restorations, while in comparison with a leucite-reinforced glass ceramic exhibited inferior properties. CLINICAL SIGNIFICANCE: Tooth brushing affected differently the surface of the tested restorative materials. However, the abrasive wear that was induced was negligible. Clinical studies are necessary to ascertain if there is clinical significance of these surface alterations that may demand repair of such restorations.

Adherence of Candida albicans to Five Long-Term Silicone-Based Denture Lining Materials Bonded to CAD-CAM Denture Base.

PURPOSE: Knowledge about quantifying the number as well as the retention and adhesion of Candida albicans blastoconidia to silicone denture liners is limited. Thus, the aim of this in vitro study was to explore the adherence of C. albicans to the surface of five long-term silicone-based soft denture lining materials, using artificial saliva. MATERIALS AND METHODS: A total of 50 specimens (10 × 10 × 3 mm) of five long-term resilient liners (Molloplast-B; GC Reline Soft; Elite Soft Relining; Tokuyama Sofreliner S; Ufigel SC), bonded to a computer-aided design and computer-aided manufacturing denture base, were prepared. The specimens were inoculated and incubated in artificial saliva for 1 and 24 hours with a standardized (2.8 × 106 cfu/ml) C. albicans suspension. At the end of the incubation period, the specimens were stained with acridine orange and observed using fluorescence microscopy. RESULTS: After 1 hour and in 24 hours, Molloplast B demonstrated significantly earlier adherence of C. albicans cells compared to the other chairside materials (p < 0.001 and p < 0.001, respectively), where the mean number of cells also increased in the frontal parts. Regarding the rate of C. albicans proliferation from 1 to 24 hours within the materials, there was an increase in all materials (Molloplast B: p < 0.001; GC Reline Soft: p = 0.220; Elite Soft Relining: p = 0.032; Tokuyama Sofreliner S: p = 0.001; Ufigel Sc: p = 0.001). The Ufigel Sc showed a significant 2.5-fold increase at 24 hours. CONCLUSIONS: Long-term silicone denture liners accumulate a significant amount of C. albicans blastoconidia and their coverage by them increases progressively over time.

Effect of a fiber-reinforcing technique for direct composite restorations of structurally compromised teeth on marginal microleakage.

OBJECTIVES: To evaluate if the marginal microleakage of extensive Class I composite resin restorations can be affected by applying ultra-high-molecular-weight polyethylene (UHMWPE) fibers with the wallpapering technique combined with different restorative materials and methods. MATERIALS AND METHODS: A 120 human molars were selected and one extensive Class I cavity was prepared on the occlusal surface of each tooth. The specimens were divided into 12 groups (n = 10) according to the type of restorative material (Filtek Z550, Beautifil II LS or Beautifil Bulk Restorative), the use or not of reinforcing fibers (ribbond) and the applied restorative technique (incremental or bulk). The specimens were subjected to thermocycling and then immersed into a 50 wt% silver nitrate solution following a dying protocol. Subsequently, the teeth were prepared for SEM observations to evaluate the extent of marginal microleakage. RESULTS: Three-way ANOVA revealed that the type of material, the use of ribbond fibers and the type of restorative technique significantly affected marginal microleakage (p < 0.001). Application of ribbond fibers decreased marginal microleakage to all tested restorative materials, regardless of the restorative technique, in a range of 31.2-81.4%. In the groups with no-use of ribbond fibers, among the materials there were no significant differences in microleakage when the teeth were restored with the incremental technique (p > 0.05). CONCLUSIONS: The use of UHMWPE fibers with wallpapering technique in Class I composite restorations may be an effective method to reduce marginal microleakage, regardless of the selected restorative technique or the material. CLINICAL RELEVANCE: Clinicians may be encouraged to utilize reinforcing fiber restorative techniques for direct restorations of structurally compromised teeth as a valid alternative to indirect restorations.

Effects of tooth bleaching protocols assisted by Er,Cr:YSGG and diode (980 nm) lasers on color change of resin-based restoratives.

OBJECTIVE: To evaluate color change of three resin-based restorative materials after two laser-assisted in-office tooth bleaching protocols using Er,Cr:YSGG and diode (980 nm) lasers. MATERIALS AND METHODS: A nanohybrid composite resin (EP), a Bis-GMA free composite resin (EPBio) and a resin-matrix CAD-CAM ceramic (HC) were tested. Ninety specimens were prepared and stored in artificial saliva. Group 1 received an in-office bleaching treatment using 40% H2 O2. The same bleaching procedure was assisted by Er,Cr:YSGG laser in Group 2 and by a diode laser (980 nm) in Group 3. Color measurements were performed using a double-beam UV-Vis spectrophotometer at four time intervals (before, 24 h, 15 and 30 days), converted to L*, a*, and b* units of the CIELAB color space and assessed on the basis of 50:50% acceptability (ΔΕab * = 2.7 and ΔΕ00  = 1.77) and 50:50% perceptibility (ΔΕab * = 1.2 and ΔΕ00  = 0.81) thresholds. Three-way ANOVA with repeated measurements was used for statistical analysis of the data. RESULTS: Color and whiteness changes did not exceed the established 50:50% acceptability thresholds. EP presented the highest color change after the bleaching followed by EPBio and HC (p ≤ 0.05). Three-way ANOVA revealed that type of material and time interval significantly affected color change (p ≤ 0.001). CONCLUSIONS: The tested bleaching treatments assisted by Er,Cr:YSGG and diode (980 nm) lasers did not induce unacceptable color and whiteness changes in the resin-based restorative materials. CLINICAL SIGNIFICANCE: The tested Er,Cr:YSGG and diode (980 nm) laser-assisted tooth bleaching protocols which may be recommended to accelerate the clinical procedures cannot affect the color of the existing resin-based restorations in case they are accidentally exposed on the bleaching gel and laser irradiation.

Esthetic, mechanical, and biological outcomes of various implant abutments for single-tooth replacement in the anterior region: a systematic review of the literature.

BACKGROUND: The choice of the appropriate implant abutment is a critical step for a successful outcome. Titanium abutments have demonstrated high survival rates, due to their excellent biocompatibility and high mechanical strength, although they often result in a grayish discoloration of the peri-implant mucosa. This esthetic concern culminated in the introduction of ceramic abutments. The aim of this review was to assess the esthetic, mechanical, and biological outcomes as well as the survival of the different types of abutments used for single-implant restorations in the anterior area. MATERIAL AND METHODS: An electronic search was conducted in Medline, Embase, and Cochrane Central databases using the appropriate Mesh terms and predetermined eligibility criteria. The quality of the studies was assessed using the ROB 2 tool. The last search was conducted on 18th of March 2020. RESULTS: From the 2074 records initially identified, 23 randomized controlled trials (32 publications) were included for qualitative analysis. Data were classified based on study information, specific characteristics of the intervention and comparator, and information related to the outcome measures. Seven studies exhibited an overall low risk of bias, while twelve studies raised some concerns. CONCLUSIONS: The rate of abutment failure was low and was associated with the ceramic abutments, especially those with internal connection. Limited correlation was noted between soft tissue thickness and color difference. Titanium abutments caused significantly more discoloration to the soft tissues than ceramic abutments, while hueing (gold or pink) slightly improved their color performance. Zirconia allowed a better color match than titanium or gold abutments, still discolored slightly the soft tissues. The submucosally modified zirconia abutments exhibited encouraging results. No significant difference was reported between materials or different types of retention on recession, papillary fill, and biological outcomes.

Quantitative and Qualitative Evaluation of Enamel Erosion Following Air Abrasion with Bioactive Glass 45S5.

PURPOSE: To evaluate the effect of pre-treatment air abrasion of surfaces using bioactive glass 45S5 on the progression of erosion in bovine enamel induced by a common soft drink. MATERIALS AND METHODS: Twelve intact bovine incisors were selected and 24 enamel samples were prepared and randomly assigned to two groups (n = 12): 1. control group, no anti-erosive treatment; 2. experimental group: samples were air abraded with bioglass 45S5 before the erosive challenge. The enamel samples were submitted to erosive cycling using a common soft drink. Enamel surface loss was evaluated using optical profilometry; surface microhardness and roughness changes were determined using Vickers method and Vertical Scanning Interferometry, respectively. In addition, SEM observations and EDS analysis were performed to detect any alterations in surface morphology and mineral content. The data were statistically analysed using one-way ANOVA and Tukey's post-hoc test at a significance level of α = 0.05. RESULTS: The experimental group exhibited less (18.7%) surface loss than did the control group (p < 0.05), while also presenting a statistically significantly smaller decrease in surface microhardness compared to the control group after erosive cycling (p < 0.05). However, neither group showed a statistically significant change in surface roughness (p > 0.05). After the treatments, changes in surface morphology and mineral content of enamel were observed. CONCLUSIONS: Surface pre-treatment using air abrasion bioglass 45S5 may help prevent enamel erosion induced by excessive consumption of soft drinks. Further clinical trials are needed to confirm the effectiveness of this method and its clinical significance.

Theoretical Considerations and a Mathematical Model for the Analysis of the Biomechanical Response of Human Keratinized Oral Mucosa.

Removable complete and partial dentures are supported by the residual alveolar ridges consisting of mucosa, submucosa, periosteum, and bone. An understanding of the biomechanical behavior of the oral mucosa is essential in order to improve the denture-bearing foundations for complete and partially edentulous patients. The purpose of this paper was to examine the biomechanical behavior of the soft tissues supporting a removable denture and develop a model for that reason. Keratinized oral mucosa blocks with their underlying bone were harvested from the maxillary palatal area adjacent to the edentulous ridges of a cadaver. The compressive response of the oral mucosa was tested by using atomic force microscopy. The specimens were first scanned in order their topography to be obtained. The mechanical properties of the specimens were tested using a single crystal silicon pyramidal tip, which traversed toward the keratinized oral mucosa specimens. Loading-unloading cycles were registered and four mathematical models were tested using MATLAB to note which one approximates the force-displacement curve as close as possible: a. spherical, b. conical, c. third order polynomial, d. Murphy (fourth order polynomial, non-linear Hertzian based). The third order polynomial model showed the best accuracy in representing the force-displacement data of the tested specimens. A model was developed in order to analyze the biomechanical behavior of the human oral keratinized mucosa and obtain information about its mechanical properties.

Soft denture liners' effect on the masticatory function in patients wearing complete dentures: A systematic review.

OBJECTIVES: To explore the effect of soft denture liners on the masticatory performance and muscle activity of edentulous patients wearing complete dentures, as determined by using objective measurement methods. DATA: Randomized controlled clinical trials and Cross-over studies that evaluated the masticatory capacity and muscle activity in denture wearers with and without soft denture liners were included in this systematic review. SOURCES: A comprehensive literature search was performed via electronic databases using the appropriate key words. The last search took place in September 2014. STUDY SELECTION: The potentially appropriate articles were identified and evaluated for eligibility through a predefined review process conducted by two examiners. Six out of the 176 identified records were included for quality and systematic assessment. CONCLUSIONS: The observed clinical and methodological diversity determined the narrative approach for the pooling of the findings. According to the studies brought together for the current systematic review, soft denture liners provided denture wearers with increased masticatory function compared to conventional denture base materials. Specifically, the use of long-term silicone liners significantly improved the mastication parameters. The observed intervention effects suggest further studies of higher quality to allow reliable conclusions to be drawn and to strengthen the clinical significance of these materials to patient's functionality. CLINICAL SIGNIFICANCE: Soft denture lining materials have been suggested to address functional problems arising during complete denture function. This study was designed to systematically review the impact of soft liners' use on the masticatory efficiency in denture wearers.

Association between functional tooth units and chewing ability in older adults: a systematic review.

OBJECTIVES: To systematically review the current evidence on the relationship between dentition status and chewing ability in older adults, as the latter was subjectively perceived by questionnaires. BACKGROUND: Tooth loss is associated with functional impairment regarding chewing ability, depending on the number and the location of the remaining teeth. METHODS: A search of the English literature was undertaken using the appropriate electronic databases and keywords in order to answer the question of this review. Independent extraction of the related articles was carried out by two authors using predefined eligibility criteria. RESULTS: Full-text analysis was performed for 51 articles of possible relevance. Finally, data were extracted from 18 studies, published in 20 articles that met the inclusion criteria. CONCLUSIONS: Although there was a conflict between the studies relevant to the number of functional tooth units needed to maintain adequate oral function, it was revealed that chewing ability was closely related to the number and distribution of teeth remaining. Treatment plan should focus on the preservation of the strategic parts of the dental arch that are critical for adequate oral function. Long-term prospective studies, comprising well-defined criteria, clinical variables, methods and utilising comprehensive questionnaires, should be preferred to obtain a clearer picture on the association between masticatory ability and functional tooth units.

Management of provisional restorations' deficiencies: a literature review.

UNLABELLED: Provisional restorations are designed in order to protect oral structures and promote function and esthetics for a limited period of time, after which they are to be replaced by a definite prosthesis. They play a particular role in diagnostic procedures and continued evaluation of the treatment plan, as they should resemble the form and function of the definite rehabilitation that they precede. Therefore, interim treatment should satisfy the criteria of marginal adaptation, strength, and longevity. In complicated treatment plans that intend to last for extended periods of time, the function of provisional prostheses involves the possibility of relining, modification, or repair. These adjustments raise considerations regarding the strength of the resultant bond. Chemical composition of the base and repair material, surface characteristics of fracture parts, and time elapsed since the initial set of the rehabilitation should be considered in the decision of the appropriate repair material and technique. Proper pretreatment of the provisional components' surfaces is essential to ensure bonding as well. The purpose of this article is to illustrate the management of provisional restorations' deficiencies. This article highlights possible failures of custom-fabricated provisional restorations, describes methods to prevent their occurrence, and discusses clinical techniques for their management. Finally, the proper combination of materials and surface preparation to achieve the optimum treatment outcomes are presented. CLINICAL SIGNIFICANCE: Provisional restorations' failures and other deficiencies are encountered by clinicians on a daily basis. Adequate laboratory techniques and material combinations presented herein may contribute to their efficient and predictable modifications and repairs.

Assessing oral health promotion determinants in active Greek elderly.

OBJECTIVE: To explore older adults' patterns and risk behaviours to be invoked in the allocation of strategies to promote oral health. BACKGROUND: to dental services is determined by factors that serve as barriers to or enablers of older adults' behaviour and attitudes towards oral health. Appropriate oral health promotion activities are of particular importance among the elderly in altering oral health behaviour through education, prevention and health protection. METHODS: A cross-sectional study was conducted among 108 dentate elderly subjects. They were attending a University Prosthetic Dentistry Clinic in Greece as patients seeking treatment. Participants underwent a clinical examination and an interview. RESULTS: Data extracted revealed that cost and no disease awareness were the most frequently mentioned barriers to regular dental visits. Most of the participants presented low level of income and education and reduced presence of adverse dental health symptoms compared with the actual oral health status. Besides some predisposing factors, enabling and need variables significantly affected access to dental care services, participants' number of remaining teeth and as a consequence oral health status. CONCLUSION: Profiling older adults' demographics, economic, social and cultural status and their attitudes and beliefs could further contribute in developing universal activities and strategies for oral health promotion so as ageing challenges are favoured.

Evaluating dental status and prosthetic need in relation to medical findings in Greek patients suffering from idiopathic Parkinson's disease.

Parkinson's disease is one of the common neurological conditions which predominantly affects the elderly but increasingly also younger people. Sufferers present persistent problems with oral health aggravated by extensive tooth loss leading to an impaired dentition. Greece and other countries experiencing the same demographic trends, face growing numbers of sufferers. This study surveyed the dental status and the need for dental treatment of a sample of Greek patients with Parkinson's disease. A structured questionnaire was used. 30% of the participants were younger sufferers. 80% of the elderly group were young elderly. 98% of the participants were denture wearers. Extensive oral problems were recorded in all participants.