Photo-switchable Collectors for the Flotation of Lithium Aluminate for the Recycling of the Critical Raw Material Lithium.

Flotation of the mineral lithium aluminate by application of the natural product punicine from Punica granatum and some derivatives as collectors is examined. Punicines, 1-(2',5'-dihydroxyphenyl)-pyridinium compounds, are switchable molecules whose properties can be changed reversibly. They exist as cations, neutral mesomeric betaines, anions, and dianions depending on the pH. In light, they form radicals. Five punicine derivatives were prepared which possess ß-methyl, ß-chlorine, γ-tert.-butyl, and γ-acetyl groups attached to the pyridinium ring, and a pyrogallol derivative. On the other hand, LiAlO2 reacts with water to give species such as LiAl2(OH)7 on its surface. Flotations were performed applying the punicines in daylight (3000 lux), in darkness (<40 lux) and under UV-irradiation (4500 lux, 390-400 nm). The pH of the suspension, the collector's concentration, the conditioning time as well as the flotation time were varied. The recovery rates strongly depend on these parameters. For example, the recovery rate of lithium aluminate was increased by 116 % on changing the lighting condition from daylight to darkness, when the pyrogallol derivative of punicine was applied. UV, FTIR, TGA and zeta potential measurements as well as DFT calculations were performed in order to gain insight into the chemistry of punicines on the surface of LiAlO2 and LiAl2(OH)7 in water which influence the flotation's results.

Lithium aluminate flotation by pH- and light-switchable collectors based on the natural product punicine.

Derivatives of the natural product punicine [1-(2',5'-dihydroxyphenyl)pyridinium chloride] were developed as switchable collectors for the flotation of lithium-containing engineered artifical minerals (EnAMs). These EnAMs are e.g. formed by pyrometallurgical processing of end-of-life lithium-ion batteries. Depending on the pH value and the lighting conditions, punicines exist in water as cations, two different electrostatically neutral mesomeric betaines, anionic tripoles, radical cations or radical anions. The radical species form by photochemically induced disproportionation reactions. We prepared punicine derivatives introducing alkyl chains in the pyridinium moiety (4-methyl, 4-ethyl, 4-octyl and 4-undecanyl) to install hydrophobic groups and examined the recovery rates of the flotation of lithium aluminate (LiAlO2). We varied the lighting conditions (darkness, daylight, LED irradiation at λ = 390-400 nm) and the pH value, the collector's and frother's concentration, and the flotation time. With our collectors, recovery rates of lithium aluminate up to 90% were accomplished when the flotation was conducted in Hallimond tubes exposed to daylight at pH 11 in water.

Highly Sensitive Switchable Sensors for Hydroxide on Glass Surfaces Based on Isoquinolinium-Quinolinium-substituted Acetylenes.

Bi-substituted acetylenes with a quinolinium and an isoquinolinium substituent are described, which reversibly form intensely colored adducts with O-nucleophiles and thus enable the detection of >0,5 ppm hydroxide on the surfaces of various glasses. Acids reconstitute the colorless bi-substituted acetylenes. The quinolinium and isoquinolinium rings are bound via their 2-, 3-, 4- and 1-, 3-, 4-positions to the triple bond, respectively. The choice of substitution sites of the hetarenium rings enables the design of mixed conjugated/cross-conjugated π-electron systems. Depending on the combination of binding sites, the frontier orbital profile, the triple bond polarization, the fluorescence behaviour, and the sensitivity to hydroxide differs.

Polyether-tethered imidazole-2-thiones, imidazole-2-selenones and imidazolium salts as collectors for the flotation of lithium aluminate and spodumene.

Imidazolium salts were prepared which possess 2-ethoxyethyl pivalate or 2-(2-ethoxyethoxy)ethyl pivalate groups as amphiphilic side chains with oxygen donors as well as n-butyl substituents as hydrophobic groups. The N-heterocyclic carbenes of the salts, characterized by 7Li and 13C NMR spectroscopy as well as by Rh and Ir complex formation, were used as starting materials for the preparation of the corresponding imidazole-2-thiones and imidazole-2-selenones. Flotation experiments in Hallimond tubes under variation of the air flow, pH, concentration and flotation time were performed. The title compounds proved to be suitable collectors for the flotation of lithium aluminate and spodumene for lithium recovery. Recovery rates up to 88.9% were obtained when the imidazole-2-thione was used as collector.

Intramolecular Phosphine-Promoted Knoevenagel Based Redox-Reaction.

A Knoevenagel based redox-reaction promoted by intramolecular phosphine sources is presented for the first time. The influence of different diketones, aldehydes, bases and acids was investigated. The effects of different substituents were evaluated based on their electronical influence on the diketone structure. With the obtained results a mechanism is proposed, giving information about transition states formed during the reaction, which can lead to different products. This type of an internal redox transformation with a phosphine oxide moiety remaining in the molecule after the redox reaction represents a new type of reaction.

Surface Tuning of Wood via Covalent Modification of Its Lignocellulosic Biopolymers with Substituted Benzoates-A Study on Reactivity, Efficiency, and Durability.

Chemical modification of wood applying benzotriazolyl-activated carboxylic acids has proven to be a versatile method for the durable functionalization of its lignocellulosic biopolymers. Through this process, the material properties of wood can be influenced and specifically optimized. To check the scope and limitations of this modification method, various benzamide derivatives with electron-withdrawing (EWG) or electron-donating (EDG) functional groups in different positions of the aromatic ring were synthesized and applied for covalent modification of Scots pine (Pinus sylvestris L.) sapwood in this study. The bonded amounts of substances (up to 2.20 mmol) were compared with the reactivity constants of the Hammett equation, revealing a significant correlation between the modification efficiency and the theoretical reactivity constants of the corresponding aromatic substitution pattern. The successful covalent attachment of the respective substituted benzamides was proven by attenuated total reflection infrared (ATR-IR) spectroscopy, while the stability of the newly formed ester bond was proven in a standardized leaching test.

Phosphine-Catalyzed Aryne Oligomerization: Direct Access to α,ω-Bisfunctionalized Oligo(ortho-arylenes).

A phosphine-catalyzed oligomerization of arynes using selenocyanates was developed. The use of JohnPhos as a bulky phosphine is the key to accessing α,ω-bisfunctionalized oligo(ortho-arylenes) with RSe as the substituent at one terminus and CN as the substituent at the other. The in situ formation of R3PSeR' cations, serving as sterically encumbered electrophiles, hinders the immediate reaction that affords the 1,2-bisfunctionalization product and instead opens a competitive pathway leading to oligomerization. Various optimized conditions for the predominant formation of dimers, but also for higher oligomers such as trimers and tetramers, were developed. Depending on the electronic properties of the electrophilic reaction partner, even compounds up to octamers were isolated. Optimization experiments revealed that a properly tuned phosphine as catalyst is of crucial importance. Mechanistic studies demonstrated that the cascade starts with the attack of cyanide; aryne insertion into n-mers leading to (n+1)-mers was ruled out.

Durable Modification of Wood by Benzoylation-Proof of Covalent Bonding by Solution State NMR and DOSY NMR Quick-Test.

A convenient, broadly applicable and durable wood protection was recently published by Kaufmann and Namyslo. This procedure efficiently allows for esterification of wood hydroxyl groups with (1H-benzotriazolyl)-activated functionalized benzoic acids. The result of such wood-modifying reactions is usually monitored by an increase in mass of the wood material (weight percent gain value, WPG) and by infrared spectroscopy (IR). However, diagnostic IR bands suffer from overlap with naturally occurring ester groups, mainly in the hemicellulose part of unmodified wood. In contrast to known NMR spectroscopy approaches that use the non-commonly available solid state techniques, herein we present solution state NMR proof of the covalent attachment of our organic precursors to wood. The finding is based on a time-efficient, non-uniformly sampled (NUS) solution state 1H,13C-HMBC experiment that only needs a tenth of the regular recording time. The appropriate NMR sample of thoroughly dissolved modified wood was prepared by a mild and non-destructive method. The 2D-HMBC shows a specific cross-signal caused by spin-spin coupling over three bonds from the ester carbonyl carbon atom to the α-protons of the esterified wood hydroxyl groups. This specific coupling pathway requires a covalent bonding as a conditio sine qua non. An even more rapid test to monitor the covalent bonding was achieved with an up-to-date diffusion-ordered spectroscopy sequence (Oneshot-DOSY) based on 1H or 19F as the sensitive nucleus. The control experiment in a series of DOSY spectra gave a by far higher D value of (1.22 ± 0.06)∙10-10 m2∙s-1, which is in accordance with fast diffusion of the "free" and thus rapidly moving small precursor molecule provided as its methyl ester. In the case of a covalent attachment to wood, a significantly smaller D value of (0.12 ± 0.01)∙10-10 m2∙s-1 was obtained.

Sydnone Methides-A Forgotten Class of Mesoionic Compounds for the Generation of Anionic N-Heterocyclic Carbenes.

Sydnone methides are described from which only one single example has been mentioned in the literature so far. Their deprotonation gave anions which can be formulated as π-electron rich anionic N-heterocyclic carbenes. Sulfur and selenium adducts were stabilized as their methyl ethers, and mercury, gold as well as rhodium complexes of the sydnone methide carbenes were prepared. Sydnone methide anions also undergo C-C coupling reactions with 1-fluoro-4-iodobenzene under Pd(PPh3 )4 and CuBr catalysis. 77 Se NMR resonance frequencies and 1 JC4-Se as well as 1 JC4-H coupling constants have been determined to gain knowledge about the electronic properties of the anionic N-heterocyclic carbenes. The carbene carbon atom of the sydnone methide anion 3 j resonates at δ=155.2 ppm in 13 C NMR spectroscopy at -40 °C which is extremely shifted upfield in comparison to classical N-heterocyclic carbenes.

Zn2+ detection of a benzimidazole 8-aminoquinoline fluorescent sensor by inhibited tautomerization.

A new fluorescent chemosensor based on 8-aminoquinoline L1 bearing a benzimidazole moiety was synthesized, which exists as two predominant tautomers L1A and L1B in diluted DMSO-d6 solution. Among various metal ions, L1 showed a highly selective and sensitive turn-on fluorescence response to the presence of Zn2+ ions in methanol. The detection limit for Zn2+ by L1 was calculated to be 1.76 × 10-7 M. The 1 : 1 complexation ratio of the L1-Zn complex was confirmed through Job plot measurements. Complexation studies were performed by FT-IR, NMR and HR-ESI MS measurements and DFT calculations. With the gained insight, it was possible to successfully apply L1 in water sample analysis.

Novel nicotinoid structures for covalent modification of wood: an environmentally friendly way for its protection against insects.

Timber is constantly exposed to environmental influences under outdoor conditions which limits its lifetime and usability. In order to counteract the damaging processes caused by insects, we have developed a novel and more environmentally friendly method to protect wood materials via covalent modification by organic insecticides. Starting with an important class of synthetic insecticides which are derived from the natural insecticide nicotine, various new carboxylic acid derivatives of imidacloprid were made accessible. These activated neonicotinoids were utilized for the chemical modification of wood hydroxy groups. In contrast to conventional wood preservation methods in which biocides are only physically bound to the surface for a limited time, the covalent fixation of the preservative guarantees a permanent effect against wood pests, demonstrated in standardized biological tests. Additionally, the environmental interaction caused by non-bound neonicotinoids is significantly reduced, since both, a smaller application rate is required and leaching of the active ingredient is prevented. By minimizing the pest infestation, the lifetime of the material increases while preserving the natural appearance of the material.

Synthesis and characterization of propeller-shaped mono- to hexacationic quinolinium-substituted benzenes.

Diels-Alder reaction of 2-, 3- and 4-(phenylethynyl)quinolines and tetraphenylcyclopentadienone gave three regioisomeric 2,3,4,5,6-pentaphenyl-1-(quinolin-2-yl, -3-yl, and -4-yl)benzenes. Restricted rotation of the 3-yl and 4-yl substituted derivatives is observed between the central core and the substituents, resulting in propeller-shaped molecules. Likewise, 1,2-diquinolinyl-3,4,5,6-tetraphenylbenzenes with 3-yl,3-yl and 3-yl,4-yl connectivity were prepared. As evidenced by NMR spectroscopy, they form two diasteromers due to their restricted rotation. A cobalt-catalyzed [2 + 2 + 2]-cyclotrimerization of 2-(phenylethynyl)quinoline resulted in the formation of triphenyl-2,4,6- and -3,5,6-tri(quinolin-2-yl)benzenes. The same reaction was applied to 3,3'-ethyne-1,2-diyldiquinoline which formed hexa(quinolin-3-yl)benzene. N-Methylation gave the title compounds. Among those, the hexacationic hexa(N-methylquinolinio-3-yl)benzene is described. Stereochemical aspects are predominantly discussed by means of results of NMR experiments. DFT-calculations on the most stable conformations and the frontier orbital profiles of the hexacation as well as of its neutral precursor have been carried out.

Synthesis of γ-hydroxy-α-(arylmethyl)carboxylic acids from lactones: pathway to a structural motif derived from lactic acid and amino acid analogs?

OBJECTIVE: A synthetic pathway to γ-hydroxy-α-(arylmethyl)carboxylic acids starting from α-angelica lactone and γ-butyrolactone was investigated. These γ-hydroxycarboxylic acids resemble structural motifs of lactic acid and amino acids. The possibility of cocondensation with lactic acid towards functionalized poly(lactic acid)s was analyzed. RESULTS: The functional γ-hydroxycarboxylates sodium 4-hydroxy-2-((N-methylpyrazol-4-yl)methyl)pentanoate and sodium 4-hydroxy-2-(phenylmethyl)butanoate (2-benzyl-4-hydroxybutanoate) were synthesized in good yields as a proof of concept for the proposed reaction pathway. Additionally, sodium (E)-2-((N-methylpyrazol-4-yl)methylene)-4-oxopentanoate presenting an interesting structural motif was isolated. All products have been fully characterized by mass spectrometry, IR spectroscopy and 2D nuclear magnetic resonance (NMR) techniques. In contrast to the carboxylate anions, the corresponding carboxylic acids obtained after acidification were found to be unstable. The instability was analyzed by NMR experiments. With the help of diffusion ordered NMR spectroscopy, the cocondensation with lactic acid was elucidated. The reaction products were characterized as oligomers of pure lactic acid, while intramolecular condensation of the γ-hydroxycarboxylic acids prevents cocondensation with lactide.

Sulfur, mercury, and boron adducts of sydnone imine derived anionic N-heterocyclic carbenes.

The sydnone imines (5-benzoylimino)-3-(2-methoxyphenyl)-sydnone imine and molsidomine were deprotonated at C4 to give sydnone imine anions which can be represented as anionic N-heterocyclic carbenes, respectively. Trapping reactions with sulfur gave unstable sydnone imine sulfides which were stabilized by the formation of methyl thioethers, methyl sulfoxides, gold complexes [(PPh3)Au-S-sydnone imine] and a bis(ligand) mercury(ii) complex. The latter possesses a tetrahedral coordination of the mercury central atom to the sulfur atoms with the N6 nitrogen atoms coordinating as neutral ligands. Water converted the molsidomine anion into ethyl(2-morpholino-2-thioxoacetyl)carbamate. Mercury(ii)chloride and triphenylborane were employed to trap the sydnone imine carbenes as mercury complexes as well as BPh3 adducts.

Purine-substituted imidazolium mesomeric betaines and their tautomeric N-heterocyclic carbenes. Formation of a cyclic borane adduct.

6-Chloropurine and 2,6-dichloropurine were reacted with N1-substituted imidazoles to give purin-6-yl substituted imidazolium salts, respectively. Deprotonation of the 1-methylimidazolium derivative resulted in the formation of the corresponding stable conjugated mesomeric betaine, whereas the 1-phenyl,- 1-vinyl- and 1-(2-hydroxyethyl) derivatives proved to be unstable. In situ generation of the mesomeric betaines by caesium carbonate in the presence of sulfur and selenium, however, gave the thiones and the selenones of the tautomeric purine-substituted imidazol-2-ylidene, respectively. Its anionic N-heterocyclic carbene was formally trapped by reaction with triethylborane at high temperatures as a cyclic boron adduct which is the first representative of a new heterocyclic ring system. DFT calculations gained insight into the electronic properties of the N-heterocyclic carbenes substituted by π-electron donators. Results of a single crystal X-ray analysis of the boron adduct are presented.

How a Transition-Metal(II) Chloride Interacts with a Eutectic AlCl3 -Based Ionic Liquid: Insights into the Speciation of the Electrolyte and Electrodeposition of Magnetic Materials.

Electrostatic interactions are characteristic of ionic liquids (ILs) and play a pivotal role in determining the formation of species when solutes are dissolved in them. The formation of new species/complexes has been investigated for certain ILs. However, such investigations have not yet focused on eutectic liquids, which are a promising class of ILs. These liquids (or liquid coordination complexes, LCCs) are rather new and are composed of cationic and anionic chloro complexes of metals. To date, these liquids have been employed as electrolytes to deposit metals and as solvents for catalysis. The present study deals with a liquid that is prepared by mixing a 1.2:1 mol ratio of AlCl3 and 1-butylpyrrolidine. An attempt has been made to understand the interactions of FeCl2 with the organic molecule using spectroscopy. It was found that dissolved Fe(II) species interact mainly with the IL anion and such interactions can lead to changes in the cation of the electrolyte. Furthermore, the viability of depositing thick magnetic films of Fe and Fe-Al has been explored.

3D-Printing inside the Glovebox: A Versatile Tool for Inert-Gas Chemistry Combined with Spectroscopy.

3D-Printing with the well-established 'Fused Deposition Modeling' technology was used to print totally gas-tight reaction vessels, combined with printed cuvettes, inside the inert-gas atmosphere of a glovebox. During pauses of the print, the reaction flasks out of acrylonitrile butadiene styrene were filled with various reactants. After the basic test reactions to proof the oxygen tightness and investigations of the influence of printing within an inert-gas atmosphere, scope and limitations of the method are presented by syntheses of new compounds with highly reactive reagents, such as trimethylaluminium, and reaction monitoring via UV/VIS, IR, and NMR spectroscopy. The applicable temperature range, the choice of solvents, the reaction times, and the analytical methods have been investigated in detail. A set of reaction flasks is presented, which allow routine inert-gas syntheses and combined spectroscopy without modifications of the glovebox, the 3D-printer, or the spectrometers. Overall, this demonstrates the potential of 3D-printed reaction cuvettes to become a complementary standard method in inert-gas chemistry.

From betaines to anionic N-heterocyclic carbenes. Borane, gold, rhodium, and nickel complexes starting from an imidazoliumphenolate and its carbene tautomer.

The mesomeric betaine imidazolium-1-ylphenolate forms a borane adduct with tris(pentafluorophenyl)borane by coordination with the phenolate oxygen, whereas its NHC tautomer 1-(2-phenol)imidazol-2-ylidene reacts with (triphenylphosphine)gold(I) chloride to give the cationic NHC complex [Au(NHC)2][Cl] by coordination with the carbene carbon atom. The anionic N-heterocyclic carbene 1-(2-phenolate)imidazol-2-ylidene gives the complexes [K][Au(NHC-)2], [Rh(NHC-)3] and [Ni(NHC-)2], respectively. Results of four single crystal analyses are presented.

Sydnone anions and abnormal N-heterocyclic carbenes of O-ethylsydnones. Characterizations, calculations and catalyses.

Deprotonated sydnones, which can be represented as anionic N-heterocyclic carbenes, were prepared as Li adducts and compared with deprotonated O-ethylsydnones (5-ethoxy-1,2,3-oxadiazol-4-ylidenes) which belong to the class of abnormal NHCs. The Pd complexes of the sydnone anions (X-ray analysis) as well as of the O-ethylsydnone carbenes proved to be efficient catalysts in aryl couplings of thiophenes.

Chemistry of polyhalogenated nitrobutadienes, 14: Efficient synthesis of functionalized (Z)-2-allylidenethiazolidin-4-ones.

The reaction of mercaptoacetic acid esters with pentachloro-2-nitro-1,3-butadiene (1) provides an appropriate precursor for the synthesis of special thiazolidin-4-ones. Applying different anilines as the second constituent for the requisite cyclization step, a series of (Z)-2-allylidenethiazolidin-4-ones was obtained in yields up to 81%. Some subsequent reactions have been examined too, such as the formation of perfunctionalized 1H-pyrazoles upon treatment with hydrazine. Thiazolidinones are as well known for their physiological activities as for their application in optoelectronics.