Peptide-Based Gel in Environmental Remediation: Removal of Toxic Organic Dyes and Hazardous Pb2+ and Cd2+ Ions from Wastewater and Oil Spill Recovery.

A dipeptide-based synthetic amphiphile bearing a myristyl chain has been found to form hydrogels in the pH range 6.9-8.5 and organogels in various organic solvents including petroleum ether, diesel, kerosene, and petrol. These organogels and hydrogels have been thoroughly studied and characterized by different techniques including high-resolution transmission electron microscopy, X-ray diffraction, Fourier-transform infrared spectroscopy, and rheology. It has been found that the xerogel obtained from the peptide gelator can trap various toxic organic dyes from wastewater efficiently. Moreover, the hydrogel has been used to remove toxic heavy metal ions Pb2+ and Cd2+ from wastewater. Dye adsorption kinetics has been studied, and it has been fitted by using the Freundlich isotherm equation. Interestingly, the gelator amphiphilic peptide gels fuel oil, kerosene, diesel, and petrol in a biphasic mixture of salt water and oil within a few seconds. This indicates that these gels not only may find application in oil spill recovery but also can be used to remove toxic organic dyes and hazardous toxic metal ions from wastewater. Moreover, the gelator can be recycled several times without significant loss of activity, suggesting the sustainability of this new gelator. This holds future promise for environmental remediation by using peptide-based gelators.

The aging effect on the enhancement of thermal stability, mechanical stiffness and fluorescence properties of histidine-appended naphthalenediimide based two-component hydrogels.

A histidine attached naphthalenediimide (NDI)-containing amphiphilic molecule (NDIP) self-assembles into nanotubes in aqueous solution at pH 6.6 as revealed by high-resolution transmission electron microscopy studies. This histidine-appended NDI forms a two-component hydrogel in the presence of tartaric acid at a molar ratio of 1 : 2. A morphological transformation was observed from a nanotube structure in the non-gel aggregated state of histidine appended NDI to interconnected cross-linked nanofibers of the two-component hydrogel in the presence of tartaric acid. Interestingly, the gel exhibits an unusual behavior upon aging compared to the fresh gel. It is found that the thermal stability and gel stiffness increase very significantly upon aging. Another important feature noted is that the very weak fluorescence of the fresh gel is transformed into bright greenish fluorescence upon aging. These results suggest that intermolecular interactions among the gelator molecules and tartaric acid in the gel phase slowly increase with time to form a mechanically very stiff and thermally robust gel.

Assembly of amino acid containing naphthalene diimide-based molecules: the role of intervening amide groups in self-assembly, gelation, optical and semiconducting properties.

Two naphthalene diimide containing molecules, one with a covalently linked peptide (P1) and the other with a covalently attached amino acid residue and a diamine moiety (P2), have been chosen in such a way that the number of intervening amide groups and the centrally located imide moieties are the same, and their molecular formulae are also identical. However, the positions of the amide groups are different in these two molecules and this can dictate a different behaviour in molecular assembly and gelation processes for each of the individual NDI-appended peptide (P1) and pseudo-peptide (P2). The molecule P1 with an attached peptide moiety and the intervening -CO-NH groups forms an organogel in a mixture of chloroform-methylcyclohexane at a very rapid rate and the mechanical strength of the gel is quite high, whereas the molecule P2, containing the amino acid and diamide moieties, and with the intervening -NH-CO groups forms an organogel in a relatively much slower rate in chloroform-methylcyclohexane mixture. The mechanical strength of the P2 gel is significantly lower compared to that of the P1 gel at the same concentration and solvent system. The minimum gelation concentration of P1 is much smaller than that of P2 in the same solvent system. The thermal stability of the P1 gel is higher than that of the P2 gel at the same concentration and solvent system. However, both of these gels form J-type aggregates in a mixture of chloroform-methylcyclohexane with a red shift in the UV-vis spectrum. The gelator P1 exhibits enhanced fluorescence compared to that of P2 at a fixed concentration and in the same solvent system (mixture of chloroform-methylcyclohexane, 5 : 95 (v/v)). The lifetime and quantum yield of the P1 gel are also significantly higher than those of the P2 gel under similar gelation conditions. Moreover, both P1 and P2 are found to exhibit significant semiconducting behaviours in their dried/xerogel states. It is important to note that the stronger gel P1 exhibits relatively better semiconducting behaviour than the weak gel P2. Interestingly, the self-assembly, gelation, photoluminescence and electrical conductivity are different for the gels obtained from these two molecules. This indicates the role of the amide bond and its linkage (whether -CONH/-NHCO) in the self-assembly, gelation and optoelectronic behaviour of these molecules in their assembled states.

A Self-Assembled Peptide-Appended Naphthalene Diimide: A Fluorescent Switch for Sensing Acid and Base Vapors.

A histidine-containing bola-amphiphilic molecule (NDIP) containing a peptide-appended naphthalenediimide (NDI) forms fluorescent hydrogels in phosphate buffer and organogels with benzenoid solvents. These gels were characterized by several spectroscopic and microscopic techniques including FT-IR, HR-TEM, powder X-ray diffraction and small-angle X-ray scattering, UV-Vis and fluorescence studies. The gelator molecule exhibits no significant fluorescence in the xerogel state, while it shows a significant fluorescence (bright cyan) in the presence of volatile organic/inorganic acid vapors; this cyan color vanishes in presence of base (ammonia vapors). A reusable paper-strip-based method based on this self-assembled fluorescent material can be used to easily detect hazardous volatile acid and base vapors with the naked eye.

Carbon nanodot-induced gelation of a histidine-based amphiphile: application as a fluorescent ink, and modulation of gel stiffness.

This is a unique example of fluorescent carbon dot-induced hydrogelation of an amino acid-based amphiphile. The carbon dot-to-amphiphile ratio dictates the gel stiffness. Moreover, this hydrogel can be used as a prominent fluorescent ink and the dried gel shows a remarkable, unusual green fluorescence in the solid state.

Luminescent Naphthalene Diimide-Based Peptide in Aqueous Medium and in Solid State: Rewritable Fluorescent Color Code.

This study convincingly demonstrates a unique example of the self-assembly of a naphthalene diimide (NDI)-appended peptide into a fluorescent J-aggregate in aqueous media. Moreover, this aggregated species shows a remarkable yellow fluorescence in solid state, an unusual phenomenon for NDI-based compounds. The aggregated species has been characterized using transmission electron microscopy (TEM), Fourier-transform infrared spectroscopy, X-ray diffraction, time-correlated single proton counting (TCSPC), UV-vis, and photoluminescence studies. TEM images reveal cross-linked nanofibrillar morphology of this aggregated species in water (pH 7.4). TCSPC study clearly indicates that the aggregated species in water has a higher average lifetime compared to that of the non-aggregated species. Interestingly, this NDI-based peptide shows H+ ion concentration-dependent change in the emission property in water. The fluorescence output is erased completely in the presence of an alkali, and it reappears in the presence of an acid, indicating its erasing and rewritable property. This indicates its probable use in authentication tools for security purposes as a rewritable fluorescence color code. This NDI-appended peptide-based molecule can be used for encryption of information due to erasing and rewritable property of the molecule in the aggregated state in aqueous medium.

Peptide-based ambidextrous bifunctional gelator: applications in oil spill recovery and removal of toxic organic dyes for waste water management.

A low molecular weight peptide-based ambidextrous gelator molecule has been discovered for efficient control of water pollution. The gelator molecules can gel various organic solvents with diverse polarity, e.g. n-hexane, n-octane, petroleum ether, petrol, diesel, aromatic solvents like chlorobenzene, toluene, benzene, o-xylene and even aqueous phosphate buffer of pH 7.5. These gels have been thoroughly characterized using various techniques including field emission scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray powder diffraction analysis, small angle X-ray scattering and rheological experiments. Interestingly, hydrogel obtained from the gelator molecule has been found to absorb toxic organic dyes (both cationic and anionic dyes) from dye-contaminated water. The gelator molecule can be reused for several cycles, indicating its possible future use in waste water management. Moreover, this gelator can selectively gel petrol, diesel, pump oil from an oil-water mixture in the presence of a carrier solvent, ethyl acetate, suggesting its efficient application for oil spill recovery. These results indicate that the peptide-based ambidextrous gelator produces soft materials (gels) with dual function: (i) removal of toxic organic dyes in waste water treatment and (ii) oil spill recovery.

Amphiphilic Peptide-Based Supramolecular, Noncytotoxic, Stimuli-Responsive Hydrogels with Antibacterial Activity.

A series of peptides with a long fatty acyl chain covalently attached to the C-terminal part and a free amine (-NH2) group at the N-terminus have been designed so that these molecules can be assembled in aqueous medium by using various noncovalent interactions. Five different peptide amphiphiles with a general chemical formula [H2N-(CH2)nCONH-Phe-CONHC12 (n = 1-5, C12 = dodecylamine)] have been synthesized, characterized, and examined for self-assembly and hydrogelation. All of these molecules [P1 (n = 1), P2 (n = 2), P3 (n = 3), P4 (n = 4), P5 (n = 5)] form thermoresponsive hydrogels in water (pH 6.6) with a nanofibrillar network structure. Interestingly, the hydrogels obtained from compounds P4 and P5 exhibit potential antimicrobial activity against Gram-positive bacteria (Staphylococcus aureus, Bacillus subtilis) and Gram-negative bacteria (Escherichia coli). Dose-dependent cell-viability studies using MTT assay (3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide) by taking human lung carcinoma (A549) cells vividly demonstrates the noncytotoxic nature of these gelator molecules in vitro. Hemolytic studies show nonsignificant or little hemolysis of human erythrocyte cells at the minimum inhibitory concentration (MIC) of these tested bacteria. Interestingly, it has been found that these antibacterial noncytotoxic hydrogels exhibit proteolytic resistance toward the enzymes proteinase K and chymotrypsin. Moreover, the gel strength and gel recovery time have been successfully modulated by varying the alkyl chain length of the N-terminally located amino acid residues. Similarly, the thermal stability of these hydrogels has been nicely tuned by altering the alkyl chain length of the N-terminally located amino acid residues. In the era of antibiotic-resistant strains of bacteria, the discovery of this new class of peptide-based antibacterial, proteolytically stable, injectable, and noncytotoxic soft materials holds future promise for the development of new antibiotics.

A tripeptide-based self-shrinking hydrogel for waste-water treatment: removal of toxic organic dyes and lead (Pb2+) ions.

A triphenylalanine-based superhydrogel shows automatic syneresis (self-compressing properties) with time and this self-shrinking behavior has been successfully utilized to remove toxic lead ions and organic dyes from waste-water efficiently with the ability to re-use for a few times.

A dipeptide-based superhydrogel: Removal of toxic dyes and heavy metal ions from waste water.

A short peptide-based molecule has been found to form a strong hydrogel at phosphate buffer solution of pH 7.46. The hydrogel has been characterized thoroughly using various techniques including field emission scanning electron microscopy (FE-SEM), wide angle powder X-ray diffraction (PXRD), and rheological analysis. It has been observed from FE-SEM images that entangled nanofiber network is responsible for gelation. Rheological investigation demonstrates that the self-assembly of this synthetic dipeptide results in the formation of mechanically strong hydrogel with storage modulus (G') around 104 Pa. This gel has been used for removing both cationic and anionic toxic organic dyes (Brilliant Blue, Congo red, Malachite Green, Rhodamine B) and metal ions (Co2+ and Ni2+ ) from waste water. Moreover, only a small amount of the gelator is required (less than 1 mg/mL) for preparation of this superhydrogel and even this hydrogel can be reused three times for dye/metal ion absorption. This signifies the importance of the hydrogel towards waste water management.

Two-Component Fluorescent-Semiconducting Hydrogel from Naphthalene Diimide-Appended Peptide with Long-Chain Amines: Variation in Thermal and Mechanical Strengths of Gels.

Two-component fluorescent hydrogels have been discovered, containing the mixtures of naphthalene diimide (NDI)-conjugated peptide-functionalized bola-amphiphile and primary amines with long alkyl chains at physiological pH 7.46. The aggregation-induced enhanced emission associated with an NDI-appended peptide in aqueous medium is rare, as water is known to be a good quencher of fluorescence. In this study, an NDI-containing gelator peptide forms a highly fluorescent aggregate in aqueous medium. Absorption and emission spectroscopic techniques reveal the formation of J-aggregates among the chromophoric moieties in their aggregated state in aqueous medium. However, this NDI-containing peptide does not form any gel in aqueous medium. In the presence of the primary amines with long alkyl chains in the buffer solution, it forms two-component fluorescent hydrogels exhibiting bright yellow fluorescence under a UV lamp (365 nm). Probably, the acid-amine interaction between the amines and the bola-amphiphile triggers the gel formation, as evident from Fourier transform infrared data, indicating the presence of a carboxylate group (-COO-) and an ammonium species (NH3+) in the coassembled two-component gel system. Low- and wide-angle powder X-ray diffraction and small-angle X-ray scattering further support the fact that the coassembled state in the gel form is produced by the supramolecular interaction between the NDI-based bola-amphiphile and the long-chain amines. Field-emission scanning electron microscopy and high-resolution transmission electron microscopy images reveal that the π-conjugated coassembled hydrogels exhibit nanofibrillar network morphologies. Interestingly, the coassembled hydrogels exhibit an enhanced fluorescence emission, excited-state lifetime, and quantum yield when compared with those of the NDI-containing amphiphile alone in its self-assembled state in aqueous medium. Moreover, the thermal stability and mechanical strength of these gels have been successfully tuned by varying the alkyl chain length of the corresponding amine. Moreover, these NDI-peptide-conjugated soft materials exhibit semiconducting behavior in their respective coassembled states. This holds future promise to use these peptide-appended NDI-based coassembled soft materials for applications in optoelectronic and other devices.

Fluorescence from an H-aggregated naphthalenediimide based peptide: photophysical and computational investigation of this rare phenomenon.

Fluorescence associated with J-aggregated naphthalenediimides (NDIs) is common. However, in this study an NDI based synthetic peptide molecule is found to form a fluorescent H-aggregate in a chloroform (CHCl3)-methylcyclohexane (MCH) mixture. An attempt has been made to explain the unusual fluorescence property of this H-aggregated NDI derivative. Time correlated single photon counting (TCSPC) shows that the average lifetime of the NDI based molecule is on the order of a few nanoseconds. It is revealed from the computational study that the transition from the second exited state (S2) to the ground energy state (S0) is responsible for the fluorescence as S1 is a dark state. Such rare violation of Kasha's rule accounts for the unusual fluorescence properties of this type of NDI molecule in the H-aggregated state.

Tailor-made design of J- or H-aggregated naphthalenediimide-based gels and remarkable fluorescence turn on/off behaviour depending on solvents.

A naphthalenediimide (NDI)-based new gelator molecule has been discovered, the molecule forms interesting J/H-aggregated species depending on solvents (aliphatic/aromatic) and remarkably, the fluorescence of the gel phase materials is nicely tuned according to the electron donating capacity of the aromatic solvent.

Selective binding of hydrogen chloride and its trapping through supramolecular gelation.

A pyridine containing amino acid based gelator forms gel in aqueous media in the presence of hydrochloric acid and the chloride ion is found to be very selective for gelation. The gelator is successfully applied for the detection and trapping of hydrogen chloride gas and this indicates its probable application for removing hazardous HCl gas from the environment.