ABSTRACT
Quantum computing allows the implementation of powerful algorithms with enormous computing capabilities and promises a secure quantum Internet. Despite the advantages brought by quantum communication, certain communication paradigms are impossible or cannot be completely implemented due to the no-cloning theorem. Qubit retransmission for reliable communications and point-to-multipoint quantum communication (QP2MP) are among them. In this paper, we investigate whether a Universal Quantum Copying Machine (UQCM) generating imperfect copies of qubits can help. Specifically, we propose the Quantum Automatic Repeat Request (QARQ) protocol, which is based on its classical variant, as well as to perform QP2MP communication using imperfect clones. Note that the availability of these protocols might foster the development of new distributed quantum computing applications. As current quantum devices are noisy and they decohere qubits, we analyze these two protocols under the presence of various sources of noise. Three major quantum technologies are studied for these protocols: direct transmission (DT), teleportation (TP), and telecloning (TC). The Nitrogen-Vacancy (NV) center platform is used to create simulation models. Results show that TC outperforms TP and DT in terms of fidelity in both QARQ and QP2MP, although it is the most complex one in terms of quantum cost. A numerical study shows that the QARQ protocol significantly improves qubit recovery and that creating more clones does not always improve qubit recovery.
ABSTRACT
New 5 G and beyond services demand innovative solutions in optical transport to increase efficiency and flexibility and reduce capital (CAPEX) and operational (OPEX) expenditures to support heterogeneous and dynamic traffic. In this context, optical point-to-multipoint (P2MP) connectivity is seen as an alternative to provide connectivity to multiple sites from a single source, thus potentially both reducing CAPEX and OPEX. Digital subcarrier multiplexing (DSCM) has been shown as a feasible candidate for optical P2MP in view of its ability to generate multiple subcarriers (SC) in the frequency domain that can be used to serve several destinations. This paper proposes a different technology, named optical constellation slicing (OCS), that enables a source to communicate with multiple destinations by focusing on the time domain. OCS is described in detail and compared to DSCM by simulation, where the results show that both OCS and DSCM provide a good performance in terms of the bit error rate (BER) for access/metro applications. An exhaustive quantitative study is afterwards carried out to compare OCS and DSCM considering its support to dynamic packet layer P2P traffic only and mixed P2P and P2MP traffic; throughput, efficiency, and cost are used here as the metrics. As a baseline for comparison, the traditional optical P2P solution is also considered in this study. Numerical results show that OCS and DSCM provide a better efficiency and cost savings than traditional optical P2P connectivity. For P2P only traffic, OCS and DSCM are utmost 14.6% more efficient than the traditional lightpath solution, whereas for heterogeneous P2P + P2MP traffic, a 25% efficiency improvement is achieved, making OCS 12% more efficient than DSCM. Interestingly, the results show that for P2P only traffic, DSCM provides more savings of up to 12% than OCS, whereas for heterogeneous traffic, OCS can save up to 24.6% more than DSCM.
ABSTRACT
Network automation promises to reduce costs while guaranteeing the required performance; this is paramount when dealing with the forecasted highly dynamic traffic that will be generated by new 5G/6G applications. In optical networks, autonomous lightpath operation entails that the optical receiver can identify the configuration of a received optical signal without necessarily being configured from the network controller. This provides relief for the network controller from real-time operation, and it can simplify the operation in multi-domain scenarios, where an optical connection spans across more than one domain. Consequently, in this work, we propose a blind and low complex modulation format (MF) and symbol rate (SR) identification algorithm. The algorithm is based on studying the effects of decoding an optical signal with different MFs and SRs. Extensive MATLAB-based simulations have been carried out which consider a coherent wavelength division multiplexed system based on 32 and 64 quadrature amplitude modulated signals at up to 96 GBd, thus enabling bit rates of up to 800 Gb/s/channel. The results show remarkable identification accuracy in the presence of linear and nonlinear noise for a wide range of feasible configurations.
ABSTRACT
The deployment of artificial neural networks-based optical channel equalizers on edge-computing devices is critically important for the next generation of optical communication systems. However, this is still a highly challenging problem, mainly due to the computational complexity of the artificial neural networks (NNs) required for the efficient equalization of nonlinear optical channels with large dispersion-induced memory. To implement the NN-based optical channel equalizer in hardware, a substantial complexity reduction is needed, while we have to keep an acceptable performance level of the simplified NN model. In this work, we address the complexity reduction problem by applying pruning and quantization techniques to an NN-based optical channel equalizer. We use an exemplary NN architecture, the multi-layer perceptron (MLP), to mitigate the impairments for 30 GBd 1000 km transmission over a standard single-mode fiber, and demonstrate that it is feasible to reduce the equalizer's memory by up to 87.12%, and its complexity by up to 78.34%, without noticeable performance degradation. In addition to this, we accurately define the computational complexity of a compressed NN-based equalizer in the digital signal processing (DSP) sense. Further, we examine the impact of using hardware with different CPU and GPU features on the power consumption and latency for the compressed equalizer. We also verify the developed technique experimentally, by implementing the reduced NN equalizer on two standard edge-computing hardware units: Raspberry Pi 4 and Nvidia Jetson Nano, which are used to process the data generated via simulating the signal's propagation down the optical-fiber system.
Subject(s)
Neural Networks, Computer , Optical Devices , Computers , Optical Fibers , Signal Processing, Computer-AssistedABSTRACT
We demonstrate the use of meta-heuristics algorithms for flatness optimization of optical frequency combs (OFCs). Without any additional component for flatness compensation, the laser alone is explored when driven by optimized bias current and radio frequency (RF) driving signals composed by multiple harmonics. The bias current amplitude and RF harmonic amplitudes and relative phases are optimized using particle swarm optimization (PSO) and differential evolution (DE) algorithms. The numerical results lead to a 9 lines-GS-laser-based OFC spectrum with 2.9 dB flatness. An online experimental optimization using the DE algorithm results in a 7-line-GS-laser-based OFC with 2 dB flatness.
ABSTRACT
Lymph node metastases are responsible for shorter survival in oral squamous cell carcinoma (OSCC). The aim of the present study was to assess the node metastasis frequency and survival according to the node metastasis features in 121 neck dissections (NDs) performed for OSCC, identifying evidence-based correlations and contrasts with previous literature. The retrospective study involved 121 patients affected by OSCC who had undergone modified radical ND (MRND) for therapeutic, elective reasons or after intraoperative positivity to metastasis of sentinel lymph nodes (SLN+). Node metastasis frequency and behaviour (typical vs. atypical) and their number and distribution according to pre-surgical cTNM cancer staging were considered and overall survival Kaplan-Meier curves were calculated for each group in order to compare mortality according to ND type (elective, therapeutic, after SLN+), lymph node metastatic pattern (typical or atypical), size (micrometastasis vs. macrometastasis) and number. Results showed statistically significant different overall survival according to pre-surgical staging, number of lymph nodes harvested and intent to surgery. Sentinel lymph node resulted in the sole positive node affected by metastasis in small cT1- cT2/cN0 OSCC and an ND subsequent to its positivity during intraoperative assessment may be considered an overtreatment.
Subject(s)
Carcinoma, Squamous Cell/surgery , Lymphatic Metastasis/pathology , Mouth Neoplasms/surgery , Neck Dissection , Adult , Aged , Aged, 80 and over , Carcinoma, Squamous Cell/pathology , Female , Humans , Kaplan-Meier Estimate , Lymph Nodes/pathology , Male , Middle Aged , Mouth Neoplasms/pathology , Neoplasm Recurrence, Local/pathology , Neoplasm Recurrence, Local/surgery , Neoplasm Staging , Prognosis , Retrospective Studies , Sentinel Lymph Node BiopsyABSTRACT
We report on the nonlinear transmission limits of various super-channel configurations in a flex-grid network upgrade scenario. In particular, we consider flexible data-rates ranging from 180Gb/s to 1.2Tb/s, employing either single-carrier, dual-carrier, or penta-carrier polarization multiplexed m-state quadrature amplitude modulation (PM-8QAM/PM-16QAM) -termed as super-channels, and establish transmission performance margins for each configuration, both with and without super-channel fiber nonlinearity compensation. Our results show that the benefit of intra super-channel nonlinearity mitigation (nonlinear compensation addressing full super-channel bandwidth) reduces with increasing sub-carrier count within the super-channel, and that single-carrier super-channel achieves the maximum improvement from nonlinearity mitigation (up to ~4.5dB, in Q-factor), better than dual-carrier (up to ~3.5dB) and penta-carrier (up to ~2dB) configurations. Moreover, the maximum reach improvement, compared to linear compensation only, is found to be ~170% (180Gb/s, PM-8QAM), ~150% (240Gb/s, PM-16QAM), ~100% (360Gb/s, PM-8QAM), ~100% (480Gb/s, PM-16QAM), and ~65% (1.2Tb/s, PM-16QAM).
ABSTRACT
Flex-grid optical networks have evolved as a near-future deployment option to facilitate dynamic and bandwidth intense traffic demands. These networks enable capacity gains by operating on a flexible spectrum, allocating minimum required bandwidth, for a given channel configuration. It is thus important to understand the nonlinear dynamics of various high bit-rate super-channel configurations, and whether such channels should propagate homogenously (uniform channel configuration) or heterogeneously (non-uniform channel configuration), when upgrading the current static network structure to a flex-grid network. In this paper, we report on the spectrum allocation strategies based on the impact of inter-channel fiber nonlinearities, for PM-16QAM channels (240Gb/s, 480Gb/s and 1.2Tb/s) -termed as super-channels, propagating both homogenously, and heterogeneously with 120Gb/s PM-QPSK, 43Gb/s PM-QPSK, and 43Gb/s DPSK traffic. In particular, we show that for high dispersion fibers, both homogenous and heterogeneous spectrum allocation enable similar performance, i.e. the nonlinear impact of hybrid traffic is found to be minimal (less than 0.5dB relative penalties). We further report that in low dispersion fibers, the impact of spectrum allocation is more pronounced, and heterogeneous traffic employing 120Gb/s PM-QPSK neighbors enables the best performance, ~0.5dB better than homogenous transmission. However, the absolute nonlinear impact of co-propagating traffic is more significant, compared to high dispersion fibers, with maximum performance penalties up to 1.5dB.
ABSTRACT
Spatial-division multiplexing in the form of few-mode fibers has captured the attention of researchers since it is an attractive approach to significantly increase the channel capacity. However, the optical components employed in such systems introduce mode-dependent loss or gain (MDL) due to manufacturing imperfections, leading to significant system impairments. In this work the impact of MDL from optical amplifiers in few-mode fibers with either weak or strong mode coupling is analyzed for a 3x136-Gbit/s DP-QPSK mode-division multiplexed transmission system. It is shown that strong mode coupling reduces the impact of MDL in a similar manner as that polarization-dependent loss is reduced in single mode fibers by polarization-mode dispersion.
ABSTRACT
The collection of information about events in the healthcare sector has been documented internationally for more than 25 years. Incident reporting is used for the structured acquisition of information about adverse events to improve patient and healthcare staff safety, prepare corrective action, and prevent event recurrence in the future. The establishment of an incident reporting system requires that the staff involved should be capable of recognizing events which require reporting. The aim of this work was to encourage operators to use the incident reporting system and gradually achieve 100% compliance in the reporting of adverse events and corrective and preventive actions taken. The project was carried out by the staff of one NephroCare dialysis center. The parameters observed were how many times the Variance Report was used, how problems were analyzed, and how many times and by what means the medical and nursing staff took action to correct problems. Ten months from the start of the project 100% reporting was achieved. All selected adverse advents were correctly reported and corrective or preventive action was taken to improve patient care and dialysis center organization. Only effective feedback on the results achieved in terms of safety and tangible improvements by staff will allow the number of reports to be kept high, and maintain participants' compliance with the incident reporting system over the long term.
Subject(s)
Renal Dialysis/standards , Risk Management/methods , Safety Management , HumansABSTRACT
BACKGROUND: The Iowa Gambling Task (IGT) is a common paradigm used to study the interactions between emotions and decision making, yet little consensus exists on the cognitive process determining participants' decisions, what affects them, and how these processes interact with each other. A novel conceptual framework is proposed according to which behavior in the IGT reflects a balance between two dissociable processes; a cognitively demanding process that tracks each option's long-term payoff, and a lower-level, automatic process that is primarily sensitive to loss frequency and magnitude. METHODS: A behavioral experiment was carried out with a modified version of IGT. In this modified version, participants went through an additional phase of interaction, designed to measure performance without further learning, in which no feedback on individual decisions was given. A secondary distractor task was presented in either the first or the second phase of the experiment. Behavioral measures of performance tracking both payoff and frequency sensitivity in choices were collected throughout the experiment. RESULTS: Consistent with our framework, the results confirmed that: (a) the two competing cognitive processes can be dissociated; (b) that learning from decision outcomes requires central cognitive resources to estimate long-term payoff; and (c) that the decision phase itself can be carried out during an interfering task once learning has occurred. CONCLUSION: The experimental results support our novel description of the cognitive processes underlying performance in the Iowa Gambling Task. They also suggest that patients' impairments in this and other gambling paradigms can originate from a number of different causes, including a failure in allocating resources among cognitive strategies. This latter interpretation might be particularly useful in explaining the impairments of patients with ventromedial prefrontal cortex lesions and, by extension, the contribution of this brain region to human decision making.