The Impact of 45S5-Bioactive Glass on Synovial Cells in Knee Osteoarthritis-An In Vitro Study.

Synovial inflammation in osteoarthritis (OA) is characterized by the release of cartilage-degrading enzymes and inflammatory cytokines. 45S5-bioactive glass (45S5-BG) can modulate inflammation processes; however, its influence on OA-associated inflammation has hardly been investigated. In this study, the effects of 45S5-BG on the release of cartilage-degrading metalloproteinases and cytokines from synovial membrane cells (SM) isolated from patients with knee OA was assessed in vitro. SM were cultivated as SM monocultures in the presence or absence of 45S5-BG. On day 1 (d1) and d7 (d7), the concentrations of Matrix Metalloproteinases (MMPs) and cytokines were assessed. In 45S5-BG-treated SM cultures, MMP9 concentration was significantly reduced at d1 and d7, whilst MMP13 was significantly increased at d7. Concentrations of interleukin (IL)-1B and C-C motif chemokine ligand 2 (CCL2) in 45S5-BG-treated SM cultures were significantly increased at both time points, as were interferon gamma (IFNG) and IL-6 at d7. Our data show an effect of 45S5-BG on SM activity, which was not clearly protective, anti-inflammatory, or pro-inflammatory. The influence of 45S5-BG on MMP release was more suggestive of a cartilage protective effect, but 45S5-BG also increased the release of pro-inflammatory cytokines. Further studies are needed to analyze the effect of BGs on OA inflammation, including the anti-inflammatory modification of BG compositions.

A 3D-Printed Wound-Healing Material Composed of Alginate Dialdehyde-Gelatin Incorporating Astaxanthin and Borate Bioactive Glass Microparticles.

In this study, a wound dressing composed of an alginate dialdehyde-gelatin (ADA-GEL) hydrogel incorporated by astaxanthin (ASX) and 70B (70:30 B2O3/CaO in mol %) borate bioactive glass (BBG) microparticles was developed through 3D printing. ASX and BBG particles stiffened the composite hydrogel construct and delayed its in vitro degradation compared to the pristine hydrogel construct, mainly due to their cross-linking role, likely arising from hydrogen bonding between the ASX/BBG particles and ADA-GEL chains. Additionally, the composite hydrogel construct could hold and deliver ASX steadily. The composite hydrogel constructs codelivered biologically active ions (Ca and B) and ASX, which should lead to a faster, more effective wound-healing process. As shown through in vitro tests, the ASX-containing composite hydrogel promoted fibroblast (NIH 3T3) cell adhesion, proliferation, and vascular endothelial growth factor expression, as well as keratinocyte (HaCaT) migration, thanks to the antioxidant activity of ASX, the release of cell-supportive Ca2+ and B3+ ions, and the biocompatibility of ADA-GEL. Taken together, the results show that the ADA-GEL/BBG/ASX composite is an attractive biomaterial to develop multipurposed wound-healing constructs through 3D printing.

Effect of Boron-Doped Mesoporous Bioactive Glass Nanoparticles on C2C12 Cell Viability and Differentiation: Potential for Muscle Tissue Application.

Mesoporous bioactive glasses (MBGs) exhibit a high surface area and a highly ordered mesoporous structure. MBGs have potential for both hard and soft tissue engineering applications. MBGs may be doped with biologically active ions to tailor their biological activity. Boron is being widely studied as a dopant of bioactive glasses. Recently, research has demonstrated the potential of boron-containing bioactive glasses for muscle regeneration. In this study, boron-containing MBGs, 10B-MBG and 18B-MBG nanoparticles, were produced by a microemulsion-assisted sol-gel approach for potential muscle regeneration applications. First, X-ray diffraction (XRD), Fourier transform infrared (FTIR), and energy-dispersive X-ray spectroscopy (EDX) analyses were conducted to study the chemical structure and composition of the nanoparticles. To examine the nanoparticle morphology, scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images were analyzed. Both SEM images and particle size distribution determined by dynamic light scattering (DLS) indicated a decrease of the average particle size after boron doping. TEM images indicated a slit-shaped mesoporous structure of nanoparticles for all compositions. The ζ potential was measured, and a negative surface charge was found for all study groups due to the presence of silanol groups. Cytocompatibility and fluorescence microscopy studies were also carried out. The results indicated that low concentrations (0.1 and 1 mg mL-1) of all MBG nanoparticles led to high viability of C2C12 cells. Fluorescence microscopy images indicated that at lower nanoparticle concentrations (0.1 and 1 mg mL-1), C2C12 cells appeared to differentiate into myotubes, which was indicated by a spindle-shaped morphology. For 10 mg mL-1 concentration of nanoparticles, C2C12 cells had a lower aspect ratio (estimated qualitatively by inspection of the images), which implied a lower degree of differentiation. Boron-doped MBG nanoparticles in reduced concentrations are suitable to induce differentiation of C2C12 cells into myotubes, indicating their potential for applications in muscle tissue repair.

A 3D Printed Bone Tissue Engineering Scaffold Composed of Alginate Dialdehyde-Gelatine Reinforced by Lysozyme Loaded Cerium Doped Mesoporous Silica-Calcia Nanoparticles.

A novel biomaterial comprising alginate dialdehyde-gelatine (ADA-GEL) hydrogel augmented by lysozyme loaded mesoporous cerium doped silica-calcia nanoparticles (Lys-Ce-MSNs) is 3D printed to create bioactive scaffolds. Lys-Ce-MSNs raise the mechanical stiffness of the hydrogel composite scaffold and induce surface apatite mineralization, when the scaffold is immersed in simulated body fluid (SBF). Moreover, the scaffolds can co-deliver bone healing (Ca and Si) and antioxidant ions (Ce), and Lys to achieve antibacterial (and potentially anticancer) properties. The nanocomposite hydrogel scaffolds can hold and deliver Lys steadily. Based on the in vitro results, the hydrogel nanocomposite containing Lys assured improved pre-osteoblast cell (MC3T3-E1) proliferation, adhesion, and differentiation, thanks to the biocompatibility of ADA-GEL, bioactivity of Ce-MSNs, and the stabilizing effect of Lys on the scaffold structure. On the other hand, the proliferation level of MG63 osteosarcoma cells decreased, likely due to the effect of Lys. Last but not least, cooperatively, alongside gentamicin (GEN), Lys brought about a proper antibacterial efficiency to the hydrogel nanocomposite scaffold against gram-positive and gram-negative bacteria. Taken together, ADA-GEL/Lys-Ce-MSN nanocomposite holds great promise for 3D printing of multifunctional hydrogel bone tissue engineering (BTE) scaffolds, able to induce bone regeneration, address infection, and potentially inhibit tumor formation and growth.

3D printing of alginate dialdehyde-gelatin (ADA-GEL) hydrogels incorporating phytotherapeutic icariin loaded mesoporous SiO2-CaO nanoparticles for bone tissue engineering.

3D printing enables a better control over the microstructure of bone restoring constructs, addresses the challenges seen in the preparation of patient-specific bone scaffolds, and overcomes the bottlenecks that can appear in delivering drugs/growth factors promoting bone regeneration. Here, 3D printing is employed for the fabrication of an osteogenic construct made of hydrogel nanocomposites. Alginate dialdehyde-gelatin (ADA-GEL) hydrogel is reinforced by the incorporation of bioactive glass nanoparticles, i.e. mesoporous silica-calcia nanoparticles (MSNs), in two types of drug (icariin) loading. The composites hydrogel is printed as superhydrated composite constructs in a grid structure. The MSNs not only improve the mechanical stiffness of the constructs but also induce formation of an apatite layer when the construct is immersed in simulated body fluid (SBF), thereby promoting cell adhesion and proliferation. The nanocomposite constructs can hold and deliver icariin efficiently, regardless of its incorporation mode, either as loaded into the MSNs or freely distributed within the hydrogel. Biocompatibility tests showed that the hydrogel nanocomposites assure enhanced osteoblast proliferation, adhesion, and differentiation. Such optimum biological properties stem from the superior biocompatibility of ADA-GEL, the bioactivity of the MSNs, and the supportive effect of icariin in relation to cell proliferation and differentiation. Taken together, given the achieved structural and biological properties and effective drug delivery capability, the hydrogel nanocomposites show promising potential for bone tissue engineering.

Combination of Selective Etching and Impregnation toward Hollow Mesoporous Bioactive Glass Nanoparticles.

In this study, binary SiO2-CaO hollow mesoporous bioactive glass nanoparticles (HMBGNs) are prepared by combing selective etching and impregnation strategies. Spherical silica particles (SiO2 NPs) are used as hard cores to assemble cetyltrimethylammonium bromide (CTAB)/silica shells, which are later removed by selective etching to generate a hollow structure. After the removal of CTAB by calcination, the mesoporous shell of particles is formed. Calcium (Ca) is incorporated into the particles using impregnation by soaking the etched SiO2 NPs in calcium nitrate aqueous solution. The amount of incorporated Ca is tailorable by controlling the ratio of SiO2 NPs:calcium nitrate in the soaking solution. The produced HMBGNs are bioactive, as indicated by the rapid formation of hydroxyapatite on their surfaces after immersion in simulated body fluid. In a direct culture with MC3T3-E1 cells, HMBGNs were shown to exhibit concentration-dependent cytotoxicity and can stimulate osteogenic differentiation of MC3T3-E1 cells at concentrations of 1, 0.5, and 0.25 mg/mL. Our results indicate that the combination of selective etching and impregnation is a feasible approach to produce hierarchical HMBGNs. The produced hollow particles have potential in drug delivery and bone tissue regeneration applications, and should be further investigated in detailed in vitro and in vivo studies.

Integration of Mesoporous Bioactive Glass Nanoparticles and Curcumin into PHBV Microspheres as Biocompatible Composite for Drug Delivery Applications.

Bioactive glasses (BGs) are being increasingly considered for biomedical applications. One convenient approach to utilize BGs in tissue engineering and drug delivery involves their combination with organic biomaterials in order to form composites with enhanced biocompatibility and biodegradability. In this work, mesoporous bioactive glass nanoparticles (MBGN) have been merged with polyhydroxyalkanoate microspheres with the purpose to develop drug carriers. The composite carriers (microspheres) were loaded with curcumin as a model drug. The toxicity and delivery rate of composite microspheres were tested in vitro, reaching a curcumin loading efficiency of over 90% and an improving of biocompatibility of different concentrations of MBGN due to its administrations through the composite. The composite microspheres were tested in terms of controlled release, biocompatibility and bioactivity. Our results demonstrate that the composite microspheres can be potentially used in biomedicine due to their dual effects: bioactivity (due to the presence of MBGN) and curcumin release capability.

Impact of Zinc- or Copper-Doped Mesoporous Bioactive Glass Nanoparticles on the Osteogenic Differentiation and Matrix Formation of Mesenchymal Stromal Cells.

Mesoporous bioactive glass nanoparticles (MBGNs) have gained relevance in bone tissue engineering, especially since they can be used as vectors for therapeutically active ions like zinc (Zn) or copper (Cu). In this study, the osteogenic properties of the ionic dissolution products (IDPs) of undoped MBGNs (composition in mol%: 70 SiO2, 30 CaO) and MBGNs doped with 5 mol% of either Zn (5Zn-MBGNs) or Cu (5Cu-MBGNs; compositions in mol%: 70 SiO2, 25 CaO, 5 ZnO/CuO) on human bone marrow-derived mesenchymal stromal cells were evaluated. Extracellular matrix (ECM) formation and calcification were assessed, as well as the IDPs' influence on viability, cellular osteogenic differentiation and the expression of genes encoding for relevant members of the ECM. The IDPs of undoped MBGNs and 5Zn-MBGNs had a comparable influence on cell viability, while it was enhanced by IDPs of 5Cu-MBGNs compared to the other MBGNs. IDPs of 5Cu-MBGNs had slightly positive effects on ECM formation and calcification. 5Zn-MBGNs provided the most favorable pro-osteogenic properties since they increased not only cellular osteogenic differentiation and ECM-related gene expression but also ECM formation and calcification significantly. Future studies should analyze other relevant properties of MBGNs, such as their impact on angiogenesis.

Synthesis, Characterization, Antibacterial Properties, and In Vitro Studies of Selenium and Strontium Co-Substituted Hydroxyapatite.

In this study, as a measure to enhance the antimicrobial activity of biomaterials, the selenium ions have been substituted into hydroxyapatite (HA) at different concentration levels. To balance the potential cytotoxic effects of selenite ions (SeO32-) in HA, strontium (Sr2+) was co-substituted at the same concentration. Selenium and strontium-substituted hydroxyapatites (Se-Sr-HA) at equal molar ratios of x Se/(Se + P) and x Sr/(Sr + Ca) at (x = 0, 0.01, 0.03, 0.05, 0.1, and 0.2) were synthesized via the wet precipitation route and sintered at 900 °C. The effect of the two-ion concentration on morphology, surface charge, composition, antibacterial ability, and cell viability were studied. X-ray diffraction verified the phase purity and confirmed the substitution of selenium and strontium ions. Acellular in vitro bioactivity tests revealed that Se-Sr-HA was highly bioactive compared to pure HA. Se-Sr-HA samples showed excellent antibacterial activity against both Gram-negative (Escherichia coli) and Gram-positive (Staphylococcus carnosus) bacterial strains. In vitro cell-material interaction, using human osteosarcoma cells MG-63 studied by WST-8 assay, showed that Se-HA has a cytotoxic effect; however, the co-substitution of strontium in Se-HA offsets the negative impact of selenium and enhanced the biological properties of HA. Hence, the prepared samples are a suitable choice for antibacterial coatings and bone filler applications.

Effect of manganese, zinc, and copper on the biological and osteogenic properties of mesoporous bioactive glass nanoparticles.

Mesoporous bioactive glass nanoparticles (MBGNs) have demonstrated promising properties for the local delivery of therapeutically active ions with the aim to improve their osteogenic properties. Manganese (Mn), zinc (Zn), and copper (Cu) ions have already shown promising pro-osteogenic properties. Therefore, the concentration-dependent impact of MBGNs (composition in mol%: 70 SiO2 , 30 CaO) and MBGNs containing 5 mol% of either Mn, Zn, or Cu (composition in mol%: 70 SiO2 , 25 CaO, 5 MnO/ZnO/CuO) on the viability and osteogenic differentiation of human marrow-derived mesenchymal stromal cells (BMSCs) was assessed in this study. Mn-doped MBGNs (5Mn-MBGNs) showed a small "therapeutic window" with a dose-dependent negative impact on cell viability but increasing pro-osteogenic features alongside increasing Mn concentrations. Due to a constant release of Zn, 5Zn-MBGNs showed good cytocompatibility and upregulated the expression of genes encoding for relevant members of the osseous extracellular matrix during the later stages of cultivation. In contrast to all other groups, BMSC viability increased with increasing concentration of Cu-doped MBGNs (5Cu-MBGNs). Furthermore, 5Cu-MBGNs induced an increase in alkaline phosphatase activity. In conclusion, doping with Mn, Zn, or Cu can enhance the biological properties of MBGNs in different ways for their potential use in bone regeneration approaches.

Osteogenic properties of manganese-doped mesoporous bioactive glass nanoparticles.

Mesoporous bioactive glass nanoparticles (MBGNs) based on the SiO2 -P2 O5 -CaO system have demonstrated promising properties for the local delivery of therapeutically active ions with the aim to improve their osteogenic properties. Manganese (Mn) has been identified as a candidate ion for local application in bone tissue engineering applications. It remains unknown how SiO2 -P2 O5 -CaO-based MBGNs influence human bone marrow-derived mesenchymal stromal cells (BMSCs) in terms of viability, proliferation, and differentiation and how these features can be modified by the addition of Mn to the MBGNs' composition. Therefore, in this study, MBGNs (composition in mol%: 50 SiO2 , 40 CaO, 10 P2 O5 ) and its Mn-doped derivate 5Mn-MBGNs (composition in mol%: 50 SiO2 , 35 CaO, 10 P2 O5 , 5 MnO) were applied to a culture of BMSCs in two different concentrations. With increasing concentration, 5Mn-MBGNs supported osteogenic differentiation and enhanced the upregulation of genes encoding for extracellular matrix proteins but also negatively influenced cell viability and proliferation. When applied in lower concentrations, MBGNs showed not only viability- and growth-enhancing effects but also significant pro-osteogenic features-however, these positive properties deteriorated with increasing concentration. Two major conclusions can be drawn from this study: (a) supplementation with Mn enhances the osteogenic properties of MBGNs in a dose-dependent manner and (b) MBGNs constitute an attractive vector for therapeutically active ions since it exhibits an intrinsic pro-osteogenic potential that can be improved and/or modified by incorporation of therapeutically active ions. Future studies should focus on the evaluation of further candidate ions that are known to influence osteogenic differentiation positively.

Primary osteoblasts, osteoblast precursor cells or osteoblast-like cell lines: Which human cell types are (most) suitable for characterizing 45S5-bioactive glass?

The question how bioactive glasses (BGs) influence the viability and osteogenic differentiation of human osteogenic cells has already been addressed by several studies. However, a literature review revealed great differences in the type of cells used for these experiments. Primary human osteoblasts (hOBs) represent the desired standard, but possess the limitation of patient variability and time-consuming isolation protocols. Therefore, several alternative cell types have been used including primary mesenchymal stromal cells (BMSCs) and the "osteoblast-like" cell lines MG-63, Saos-2, HOS, and U2OS. The aim of our study was the identification of the cell type most suitable for tissue engineering projects involving BGs by comparative analysis of cell viability and osteogenic differentiation in response to crystallized 45S5-BG. We observed that hOBs, BMSCs, and MG-63 cells were resistant to 45S5-BG induced cytotoxicity, while the viability of Saos-2, HOS, and U2OS cells was significantly reduced. In addition, we detected alkaline phosphatase activity, except in U2OS cells, that increased upon 45S5-BG cocultivation, demonstrating the induction of osteogenic differentiation. Our data and the fact that the donor-dependent variations can be avoided when using MG-63 cells suggest that these are a promising alternative to primary cells and remain an important cell line for future BG related studies.

Multifunctional zinc ion doped sol - gel derived mesoporous bioactive glass nanoparticles for biomedical applications.

Mesoporous bioactive glasses have been widely investigated for applications in bone tissue regeneration and, more recently, in soft tissue repair and wound healing. In this study we produced mesoporous bioactive glass nanoparticles (MBGNs) based on the SiO2-CaO system. With the intention of adding subsidiary biological function, MBGNs were doped with Zn2+ ions. Zn-MBGNs with 8 mol% ZnO content were synthesized via microemulsion assisted sol-gel method. The synthesized particles were homogeneous in shape and size. They exhibited spherical shape, good dispersity, and a size of 130 ±â€¯10 nm. The addition of zinc precursors did not affect the morphology of particles, while their specific surface area increased in comparison to MBGNs. The presence of Zn2+ ions inhibited the formation of hydroxycarbonate apatite (HCAp) on the particles after immersion in simulated body fluid (SBF). No formation of HCAp crystals on the surface of Zn-MBGNs could be observed after 14 days of immersion. Interestingly, powders containing relatively high amount of zinc released Zn2+ ions in low concentration (0.6-1.2 mg L-1) but in a sustained manner. This releasing feature enables Zn-MBGNs to avoid potentially toxic levels of Zn2+ ions, indeed Zn-MBGNs were seen to improve the differentiation of osteoblast-like cells (MG-63). Additionally, Zn-MBGNs showed higher ability to adsorb proteins in comparison to MBGNs, which could indicate a favourable later attachment of cells. Due to their advantageous morphological and physiochemical properties, Zn-MBGNs show great potential as bioactive fillers or drug delivery systems in a variety of applications including bone regeneration and wound healing.

Electrophoretic deposition of lawsone loaded bioactive glass (BG)/chitosan composite on polyetheretherketone (PEEK)/BG layers as antibacterial and bioactive coating.

In this study, chitosan/bioactive glass (BG)/lawsone coatings were deposited by electrophoretic deposition (EPD) on polyetheretherketone (PEEK)/BG layers (previously deposited by EPD on 316-L stainless steel) to produce bioactive and antibacterial coatings. First, the EPD of chitosan/BG/lawsone was optimized on stainless steel in terms of suspension stability, homogeneity and thickness of coatings. Subsequently, the optimized EPD parameters were used to produce bioresorbable chitosan/bioactive glass (BG)/lawsone coatings on PEEK/BG layers. The produced layered coatings were characterized in terms of composition, microstructure, corrosion resistance, in vitro bioactivity, drug release kinetics and antibacterial activity. Ultraviolet/Visible (UV/VIS) spectroscopic analyses confirmed the release of lawsone from the coatings. Moreover, the deposition of chitosan/BG coatings was confirmed by Scanning Electron Microscopy (SEM) and Fourier Transform Infrared spectroscopy (FTIR). The coated specimens presented higher corrosion resistance (10 times) in comparison to that of bare 316-L stainless steel and showed convenient wettability for initial protein attachment. The presence of lawsone in the top layer provided antibacterial effects against Staphylococcus carnosus. Moreover, the developed coatings formed apatite-like crystals upon immersion in simulated body fluid, indicating the possibility of achieving close interaction between the coating surface and bone. © 2018 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 106A: 3111-3122, 2018.

Synthesis and characterization of manganese containing mesoporous bioactive glass nanoparticles for biomedical applications.

Mesoporous bioactive glass (BG) nanoparticles based in the system: SiO2-P2O5-CaO-MnO were synthesized via a modified Stöber process at various concentrations of Mn (0-7 mol %). The synthesized manganese-doped BG nanoparticles were characterized in terms of morphology, composition, in vitro bioactivity and antibacterial activity. Scanning electron microscopy (SEM), transmission electron microscopy (TEM) and Brunauer-Emmett-Teller (BET) analysis confirmed that the particles had spherical morphology (mean particle size: 110 nm) with disordered mesoporous structure. Energy dispersive X-ray spectroscopy (EDX) confirmed the presence of Mn, Ca, Si and P in the synthesized Mn-doped BG particles. Moreover, X-ray diffraction (XRD) analysis showed that Mn has been incorporated in the amorphous silica network (bioactive glass). Moreover, it was found that manganese-doped BG particles form apatite crystals upon immersion in simulated body fluid (SBF). Inductively coupled plasma atomic emission spectroscopy (ICP-OES) measurements confirmed that Mn is released in a sustained manner, which provided antibacterial effect against Bacillus subtilis, Pseudomonas aeruginosa and Staphylococcus aureus. The results indicate that the incorporation of Mn in the bioactive glass network is an effective strategy to develop novel multifunctional BG nanoparticles for bone tissue engineering.

Antibacterial and Bioactive Coatings Based on Radio Frequency Co-Sputtering of Silver Nanocluster-Silica Coatings on PEEK/Bioactive Glass Layers Obtained by Electrophoretic Deposition.

Bioactive and antibacterial coatings on stainless steel substrates were developed and characterized in this study. Silver nanocluster-silica composite coatings of 60-150 nm thickness were deposited using radio frequency (RF) co-sputtering on PEEK/bioactive glass (BG) layers (of 80-90 µm thickness) which had been electrophoretically deposited onto stainless steel. Two sputtering conditions were used by varying the deposition time (15 and 40 min); the resulting microstructure, composition, adhesion strength, in vitro bioactivity, and antibacterial activity were investigated. Scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS), and energy dispersive spectroscopy (EDX) confirmed the presence of silver nanoclusters, which were homogeneously embedded in the silica matrix. The isoelectric point of the coatings and their charge at physiological pH were determined by zeta potential measurements. The presence of BG particles in the PEEK/BG layer allows the coatings to form apatite-like crystals upon immersion in simulated body fluid (SBF). Moreover, silver nanoclusters embedded in the silica matrix as a top layer provided an antibacterial effect against Escherichia coli and Staphylococcus carnosus.