Effect of defect-healing treatment on layered silicate precursors toward well-defined crosslinked frameworks.

The synthesis of zeolites from two-dimensional layered precursors through interlayer crosslinking of the layers is a promising avenue for realizing meticulously designed synthesis routes. However, the presence of defective silanol species in the precursors hinders the achievement of desirable synthesis outcomes. This study focuses on PREFER-a layered precursor for FER-type zeolites-which was synthesized and subjected to a liquid-mediated defect-healing treatment that we recently developed. The defect-healing process involves the use of fluoride compounds for reconstruction and organic pore fillers to stabilize the framework. The effects of the treatment on the structure, composition, and iron insertion behavior of PREFER were examined. Characterization results revealed a reduction in the number of intralayer silanol defects, whereas interlayer silanols were unaffected by the defect-healing treatment. Furthermore, the subsequent alterations observed in the crosslinking behavior with iron atoms indicated that the defect-healing treatment may enhance the insertion of iron species between the layers in more homogeneous environments compared with the untreated precursor. These findings provide valuable insights into the prospects of controlled interlayer linkage in two-dimensional zeolite materials.

Rapid synthesis of defective and composition-controlled metal chalcogenide nanosheets by supercritical hydrothermal processing.

This study presents a simple one-pot synthesis method to achieve few-layered and defective Mo(S,Se)2 and (Mo,W)S2 by using supercritical water with organic reducing agents from simple and less-toxic precursors. This synthesis process is expected to be suitable for preparing other various kinds of TMD solid solutions.

Uptake and Intraradical Immobilization of Cadmium by Arbuscular Mycorrhizal Fungi as Revealed by a Stable Isotope Tracer and Synchrotron Radiation µX-Ray Fluorescence Analysis.

Arbuscular mycorrhizal (AM) fungi can improve plant tolerance to heavy metal contamination. This detoxification ability may largely depend on how AM fungi influence the uptake and distribution of metals in host plants. Two experiments were performed in order to gain insights into the mechanisms underlying cadmium (Cd) tolerance in mycorrhizal plants. Stable isotope Cd106 and compartmented pots were adopted to quantify the contribution of the AM fungus, Rhizophagus irregularis, to the uptake of Cd by Lotus japonicus. Moreover, synchrotron radiation µX-ray fluorescence (SR-µXRF) was applied to localize Cd in the mycorrhizal roots at the sub-cellular level. The results obtained indicated that mycorrhizal colonization markedly enhanced Cd immobilization in plant roots. Less Cd was partitioned to plant shoots when only hyphae had access to Cd in the hyphal compartment than when roots also had direct access to the Cd pool. SR-µXRF imaging indicated that Cd absorbed by extraradical hyphae was translocated into intraradical fungal structures, in which arbuscules accumulated large amounts of Cd; however, plant cells without fungal structures and plant cell walls contained negligible amounts of Cd. The present results provide direct evidence for the intraradical immobilization of Cd absorbed by AM fungi, which may largely contribute to the enhanced tolerance of plants to Cd. Therefore, AM fungi may play a role in the phytostabilization of Cd-contaminated soil.

Inversion domain boundaries in MoSe2 layers.

Structural defects, including point defects, dislocation and planar defects, significantly affect the physical and chemical properties of low-dimensional materials, such as layered compounds. In particular, inversion domain boundary is an intrinsic defect surrounded by a 60° grain boundary, which significantly influences electronic transport properties. We study atomic structures of the inversion domain grain boundaries (IDBs) in layered transition metal dichalcogenides (MoSe2 and MoS2) obtained by an exfoliation method, based on the aberration-corrected scanning transmission electron microscopy observation and density functional theory (DFT) calculation. The atomic-scale observation shows that the grain boundaries consist of two different types of 4-fold ring point shared and 8-fold ring edge shared chains. The results of DFT calculations indicate that the inversion domain grain boundary behaves as a metallic one-dimensional chain embedded in the semiconducting MoSe2 matrix with the occurrence of a new state within the band gap.

Disulfide-Bridged (Mo3S11) Cluster Polymer: Molecular Dynamics and Application as Electrode Material for a Rechargeable Magnesium Battery.

Exploring novel electrode materials is critical for the development of a next-generation rechargeable magnesium battery with high volumetric capacity. Here, we showed that a distinct amorphous molybdenum sulfide, being a coordination polymer of disulfide-bridged (Mo3S11) clusters, has great potential as a rechargeable magnesium battery cathode. This material provided good reversible capacity, attributed to its unique structure with high flexibility and capability of deformation upon Mg insertion. Free-terminal disulfide moiety may act as the active site for reversible insertion and extraction of magnesium.

Atomic structures of a liquid-phase bonded metal/nitride heterointerface.

Liquid-phase bonding is a technologically important method to fabricate high-performance metal/ceramic heterostructures used for power electronic devices. However, the atomic-scale mechanisms of how these two dissimilar crystals specifically bond at the interfaces are still not well understood. Here we analyse the atomically-resolved structure of a liquid-phase bonded heterointerface between Al alloy and AlN single crystal using aberration corrected scanning transmission electron microscopy (STEM). In addition, energy-dispersive X-ray microanalysis, using dual silicon drift X-ray detectors in STEM, was performed to analyze the local chemistry of the interface. We find that a monolayer of MgO is spontaneously formed on the AlN substrate surface and that a polarity-inverted monolayer of AlN is grown on top of it. Thus, the Al alloy is bonded with the polarity-inverted AlN monolayer, creating a complex atomic-scale layered structure, facilitating the bonding between the two dissimilar crystals during liquid-phase bonding processes. Density-functional-theory calculations confirm that the bonding stability is strongly dependent on the polarity and stacking of AlN and MgO monolayers. Understanding the spontaneous formation of layered transition structures at the heterointerface will be key in fabricating very stable Al alloy/AlN heterointerface required for high reliability power electronic devices.

Coordination polymer structure and revisited hydrogen evolution catalytic mechanism for amorphous molybdenum sulfide.

Molybdenum sulfides are very attractive noble-metal-free electrocatalysts for the hydrogen evolution reaction (HER) from water. The atomic structure and identity of the catalytically active sites have been well established for crystalline molybdenum disulfide (c-MoS2) but not for amorphous molybdenum sulfide (a-MoSx), which exhibits significantly higher HER activity compared to its crystalline counterpart. Here we show that HER-active a-MoSx, prepared either as nanoparticles or as films, is a molecular-based coordination polymer consisting of discrete [Mo3S13](2-) building blocks. Of the three terminal disulfide (S2(2-)) ligands within these clusters, two are shared to form the polymer chain. The third one remains free and generates molybdenum hydride moieties as the active site under H2 evolution conditions. Such a molecular structure therefore provides a basis for revisiting the mechanism of a-MoSx catalytic activity, as well as explaining some of its special properties such as reductive activation and corrosion. Our findings open up new avenues for the rational optimization of this HER electrocatalyst as an alternative to platinum.

Cellular imaging of cadmium in resin sections of arbuscular mycorrhizas using synchrotron micro X-ray fluorescence.

Arbuscular mycorrhizal (AM) fungi function as extended roots and take an active part in plant acquisition of nutrients and also soil pollutants, such as heavy metals. The objective of this study was to establish a method to observe the localization of cadmium (Cd) Kα at subcellular levels using X-ray fluorescence (XRF) imaging with a synchrotron irradiation microbeam in resin-embedded sections of mycorrhizas. To evaluate the methodology, distributions of Cd in high-pressure-frozen Lotus japonicus-Rhizophagus irregularis mycorrhizal roots were compared between two treatments; Cd was exposed either to the roots or to the extraradical hyphae. Results showed that, in the latter treatment, Cd was restricted to fungal structures, whereas in the former, Cd was detected in cell walls of the two organisms. Plunge-frozen extraradical mycelium of Gigaspora margarita exposed to Cd showed high signals of Cd in the cell walls and vacuoles, and low in the cytoplasm. With selective staining and elemental mapping by electron-dispersive X-ray spectrometry (EDS), a positive correlation between distributions of Cd and P was revealed in the vacuole, which suggested polyP as a counter ion of Cd. These results indicated that there was no Cd relocation in rapidly frozen resin-embedded materials, therefore supporting the usefulness of this methodology.

Ultrastructure of rapidly frozen and freeze-substituted germ tubes of an arbuscular mycorrhizal fungus and localization of polyphosphate.

In arbuscular mycorrhizas (AM), the supply of phosphorus from the fungi is one of the most important benefits to the host plant. Here we describe for the first time the ultrastructure and polyphosphate (poly P) distribution in rapidly frozen and freeze-substituted germ tubes of the AM fungus Gigaspora margarita. At the ultrastructural level, phosphorus distribution was analysed using energy-filtering transmission electron microscopy, and poly P was detected using an enzyme-affinity method. Semithin sections and live cells were also stained with 4',6-diamidino-2-phenylindole, which is not specific but fluoresces yellow when viewed under UV irradiation by binding with poly P. The cryotechnique method showed that extensive elongate ellipsoid vacuoles containing a uniform electron-opaque material occupied most of the cell volume. Combining the results of multiple methods revealed that poly P was localized in a dispersed form in vacuoles and in the outer fungal cell wall. These results show the significant potential of AM fungi for phosphorus storage based on its localization in the extensive complement of vacuoles in thick hyphae. The mechanism of translocation of poly P in tubular vacuoles, and the role of poly P in the cell wall, need to be elucidated.