ABSTRACT
In this work, two bioflocculants, namely, EB-EPS and B1-EPS, were derived from Enterobacter sp. and Bacillus sp., respectively, and analyzed with regard to their production and characterization. About 0.9 and 0.16 g of purified EB and B1 were obtained from I L of fermentation broth. Chemical analysis showed the contents of purified EB and B1 mainly as 88.7 and 92.8% (w/w) of carbohydrate, and 11.3 and 21.8% (w/w) protein, respectively. Fourier-transform infrared spectrometry analysis revealed the presence of hydroxyl, amide, and carboxyl groups in the identified bioflocculant. Thermogravimetric analysis (TGA) results exhibited enhanced thermal stability with a minimum mass loss of 50% while 25% were found to have occurred at higher temperatures (>400°C) for microbe-derived compounds EB and B1 leading to the possibility of using these compounds as fillers or for fabricating composite films for high-temperature applications. Further, the compounds from both the bacteria exhibited good antibacterial characteristics against pathogenic Escherichia coli. Degradability study of bioflocculant-embedded composite films shows the possibility of attaining eco-friendly bioremediation. Accordingly, experimental results revealed the suitability of developed composite films as a suitable alternative for food packaging and biomedical applications.
Subject(s)
Bacillus/metabolism , Biopolymers/metabolism , Enterobacter/metabolism , Industrial Microbiology , Anti-Bacterial Agents/isolation & purification , Anti-Bacterial Agents/metabolism , Anti-Bacterial Agents/pharmacology , Bacillus/chemistry , Biodegradation, Environmental , Biopolymers/isolation & purification , Biopolymers/pharmacology , Enterobacter/chemistry , Escherichia coli/drug effects , Escherichia coli Infections/drug therapy , Fermentation , Flocculation , HumansABSTRACT
In the present work, copper nanoparticles (CuNPs) were in situ generated inside cellulose matrix using Terminalia catappa leaf extract as a reducing agent. During this process, some CuNPs were also formed outside the matrix. The CuNPs formed outside the matrix were observed with transmission electron microscope (TEM) and scanning electron microscope (SEM). Majority of the CuNPs formed outside the matrix were in the size range of 21-30nm. The cellulose/CuNP composite films were characterized by Fourier transform infrared spectroscopic, X-Ray diffraction and thermogravimetric techniques. The crystallinity of the cellulose/CuNP composite films was found to be lower than that of the matrix indicating rearrangement of cellulose molecules by in situ generated CuNPs. Further, the expanded diffractogram of the composite films indicated the presence of a mixture of Cu, CuO and Cu2O nanoparticles. The thermal stability of the composites was found to be lower than that of the composites upto 350°C beyond which a reverse trend was observed. This was attributed to the catalytic behaviour of CuNPs for early degradation of the composites. The composite films possessed sufficient tensile strength which can replace polymer packaging films like polyethylene. Further, the cellulose/CuNP composite films exhibited good antibacterial activity against E.coli bacteria.
Subject(s)
Cellulose/chemistry , Metal Nanoparticles/chemistry , Nanocomposites/chemistry , Plant Extracts/chemistry , Reducing Agents/chemistry , Terminalia/chemistry , Anti-Bacterial Agents , Copper/chemistry , Disk Diffusion Antimicrobial Tests , Escherichia coli/drug effects , Escherichia coli/growth & development , Food Packaging , Green Chemistry Technology , Hot Temperature , Humans , Metal Nanoparticles/ultrastructure , Nanocomposites/ultrastructure , Oxidation-Reduction , Plant Leaves/chemistry , Reducing Agents/isolation & purification , Tensile StrengthABSTRACT
The epoxide hydrolase activity of Aspergillus niger was synthesized during growth of the fungus and was shown to be associated with the soluble cell fraction. An enzyme preparation was worked out which could be used in place of the whole mycelium as biocatalyst for the hydrolysis of epoxides. The effect of four different cosolvents on enzyme activity was investigated. Consequently, dimethylsulfoxide (DMSO) was selected for epoxide solubilization. The effect of temperature on both reaction rate and enzyme stability was studied in the presence of DMSO (0.2 volume ratio). A temperature of 25 degrees C was selected for the reaction of bioconversion. With a substrate concentration of 4.5 mM a batch reactor showed that the enzyme preparation hydrolyzed para-nitrostyrene oxide with very high enantioselectivity. The (S) enantiomer of the epoxide remained in the reaction mixture and showed an enantiomeric excess higher than 99%. The substrate concentration could be increased to 20 mM without affecting the enantiomeric excess and degree of conversion. Therefore, the method is potentially useful for the preparative resolution of epoxides. Application are in the field of chiral synthons which are important building blocks in organic synthesis.
