ABSTRACT
BACKGROUND: Molar hypomineralization (MH) is defined as a multifactorial condition, and thus, its presence may be defined by interactions between environmental and genetic factors. AIM: To evaluate the association between MH, genes involved in enamel development, and the use of medication during pregnancy in early childhood. DESIGN: One hundred and eighteen children, 54 with and 64 without MH, were studied. The data collected included demographics, socioeconomic data, and the medical history of mothers and children. Genomic DNA was collected from saliva. Genetic polymorphisms in ameloblastin (AMBN; rs4694075), enamelin (ENAM; rs3796704, rs7664896), and kallikrein (KLK4; rs2235091) were evaluated. These genes were analyzed by real-time polymerase chain reaction using TaqMan chemistry. The software PLINK was used to compare allele and genotype distributions of the groups and to assess the interaction between environmental variables and genotypes (p < .05). RESULTS: The variant allele KLK4 rs2235091 was associated with MH in some children (odds ratio [OR]: 3.75; 95% confidence interval [CI] = 1.65-7.81; p = .001). Taking medications in the first 4 years of life was also associated with MH (OR: 2.94; 95% CI = 1.02-6.04; p = .041) and specifically in association with polymorphisms in ENAM, AMBN, and KLK4 (p < .05). The use of medications during pregnancy was not associated with MH (OR: 1.37; 95% CI = 0.593-3.18; p = .458). CONCLUSION: The results of this study suggest that taking medication in the postnatal period appears to contribute to the etiology of MH in some evaluated children. There may be a possible genetic influence of polymorphisms in the KLK4 gene with this condition.
Subject(s)
Molar Hypomineralization , Child , Female , Humans , Child, Preschool , Amelogenesis/genetics , Genotype , Polymorphism, Genetic/genetics , Dental EnamelABSTRACT
BACKGROUND: Eccentric instruments have been proposed as more effective and less time-consuming for endodontic instrumentation. AIM: To compare biomechanical outcomes of different instrumentation systems and time undertaken for instrumentation in resin prototypes. DESIGN: Sixty standardized prototypes of mandibular second primary molars were instrumented according to the following systems: K-files, ProTaper Next (PTN), XP-endo Shaper (XPS), XP-endo Finisher (XPF), XP-Clean (XPC), and Sequence Baby File (SBF; n = 10/each). Irrigation was performed with saline with simultaneous aspiration, and time spent was recorded. The prototypes were micro-CT-scanned before and after the instrumentation, and image sets were reconstructed and registered. Non-instrumented areas, accumulated debris, removed root material volume, and canal transportation were quantified. Data were analyzed through ANOVA, the Kruskal-Wallis test, and the Wilcoxon signed-rank test (α = 5%). RESULTS: K-files and SBF resulted in more instrumentation time (p < .05). SBF, XPC and PTN removed less root dentine (p < .05), but PTN left more untouched areas (p < .05). Accumulated debris were lower for XPC and SBF (p < .05). Canal transportation was similar among the groups. CONCLUSION: Rotary systems reduced instrumentation time, whereas SBF and XPC resulted in more conservative instrumentation, with less debris accumulation and non-instrumented areas. A dedicated paediatric endodontic system (SBF) outperformed eccentric instruments in terms of effectiveness.
ABSTRACT
OBJECTIVE: This study compared the shaping ability of TRUShape and XP-endo Shaper systems on C-shaped root canals replicas using microcomputed tomography (micro-CT). MATERIAL AND METHODS: Thirty three-dimensional replicas based on a mandibular second molar classified as C1 type I C-shaped canal were randomly divided into two groups (n = 15): TRUShape (G.TRU) and XP-endo Shaper (G.XP) and instrumented with each system according to the manufacturer's instructions. Changes in volume and surface and the unprepared area of the root canal were measured by scanning on micro-CT before and after instrumentation. RESULTS: The unprepared areas were 39% in the G.TRU and 43% in the G.XP group with no significant difference between them (p > 0.05), but both the tested systems left a high percentage of unprepared root canal walls of C-shaped root canals. CONCLUSION: TRUShape and XP-endo Shaper showed a high rate of unprepared areas with similar results after C-shaped root canals replicas for root canal preparation.
ABSTRACT
Early caries diagnosis is crucial to treatment decisions in dentistry and requires identification of lesion activity: whether a carious lesion is active (progressively demineralizing) or arrested (progressively remineralizing). This study aimed to identify microtomographic (micro-CT) differences between active and arrested smooth surface enamel lesions, to quantify those micro-CT differences by creating thresholds for ex vivo caries activity assessment to serve as a future reference standard, and to validate those thresholds against the remaining sample. Extracted human permanent teeth (n = 59) were selected for sound surfaces and non-cavitated smooth surface carious lesions. Each surface was then examined for caries activity by calibrated individuals via visual-tactile examination using the International Caries Classification and Management System (ICCMS) activity criteria. Each tooth was scanned via micro-CT and the mineral density was plotted against lesion depth. The area under the curve (AUC) was calculated and represented the loss of density for the outermost 96 µm of enamel. AUC thresholds obtained from micro-CT were established to classify sound, remineralized, and demineralized surfaces against the gold standard examiner's lesion assessment of sound, inactive, and active lesions, respectively. The established AUC thresholds demonstrated moderate agreement with the assessment in identifying demineralized lesions (k = 0.45), with high sensitivity (0.73) and specificity (0.77). This study demonstrated quantifiable differences among demineralized lesions, remineralized lesions, and sound surfaces, which contributes to the establishment of micro-CT as a reference standard for caries activity that may be used to improve clinical and laboratorial dental caries evaluations.
Subject(s)
Dental Caries , Tooth , Humans , Dental Caries/diagnosis , X-Ray Microtomography/methods , Dental Enamel/diagnostic imaging , Dental Enamel/pathology , MineralsABSTRACT
To assess the in vitro and in situ effect of experimental combined fluoride and calcium nanocomposite solutions on dental caries prevention. Nanocompound mesoporous silica (MS) with calcium (Ca) and sodium fluoride (NaF) - (MSCaNaF); MS with NaF (MSNaF), NaF solution (positive control), and deionized water (negative control - CG) were studied. The specimens (n=130) were submitted in vitro to a multispecies biofilm in the presence of 2% sucrose. After 24 h and 48 h, the culture medium pH, the percent of surface mineral loss (%SML), and lesion depth (ΔZ) were analyzed. In the in situ study, 10 volunteers participated in four phases of 7-days each. The products were applied on the specimens (n=240) before 20% sucrose solution drips. The polysaccharides (SEPS and IEPS), %SML and roughness (Sa) were evaluated. There was an in vitro decrease in pH values in 24h and 48h, compared to baseline. The MSCaNaF and MSNaF groups obtained lower values of %SML and ΔZ (p < 0.05) than CG and NaF after 24h and were similar to NaF after 48h (p<0.05). In situ results showed similar SEPS and IEPS among all groups after 48h. An after 7-days, the nanocomposites had similar values (p>0.05), while NaF was similar to CG (p>0.05). After 48h, the MSCaNaF and MSNaF reduced the %SML (p<0.05). After 7-days, both experimental nanocomposites were similar to NaF (p>0.05). Regarding Sa, MSCaNaF was better than NaF for both periods (p<0.05). The nanocomposites controlled the in vitro and in situ enamel demineralization, mainly in the initial periods.
Subject(s)
Dental Caries , Tooth Demineralization , Humans , Fluorides , Dental Caries/prevention & control , Calcium , Cariostatic Agents , Dental Caries Susceptibility , Sodium Fluoride/pharmacology , Sucrose , Tooth Demineralization/prevention & controlABSTRACT
The objective of the research was to examine the scientific literature concerning restorative materials with bioactive properties for the purpose of covering dentin. Searches were performed in various databases including MEDLINE, Scopus, Web of Science, Cochrane Library, Lilacs/BBO, and Embase. Inclusion criteria involved studies that utilized the terms "dentin" and "bioactive", along with "ion-releasing", "smart materials", "biomimetic materials" and "smart replacement for dentin". The information extracted included the title, authors, publication year, journal and the country of affiliation of the corresponding author. The studies were categorized based on their study design, type of material, substrate, analytical method, and bioactivity. A total of 7161 records were recovered and 159 were included for data extraction. Most of the publications were in vitro studies (n = 149), testing different types of materials in sound dentine (n = 115). Most studies were published in Dental Materials (n = 29), and an increase in publications could be observed after the year 2000. Most of the articles were from the USA (n = 34), followed by Brazil (n = 28). Interfacial analysis was the most investigated (n = 105), followed by bond strength (n = 86). Bioactivity potential was demonstrated for most tested materials (n = 148). This review presents insights into the current trends of bioactive materials development, clearly showing a severe lack of clinical studies.
ABSTRACT
Abstract To assess the in vitro and in situ effect of experimental combined fluoride and calcium nanocomposite solutions on dental caries prevention. Nanocompound mesoporous silica (MS) with calcium (Ca) and sodium fluoride (NaF) - (MSCaNaF); MS with NaF (MSNaF), NaF solution (positive control), and deionized water (negative control - CG) were studied. The specimens (n=130) were submitted in vitro to a multispecies biofilm in the presence of 2% sucrose. After 24 h and 48 h, the culture medium pH, the percent of surface mineral loss (%SML), and lesion depth (ΔZ) were analyzed. In the in situ study, 10 volunteers participated in four phases of 7-days each. The products were applied on the specimens (n=240) before 20% sucrose solution drips. The polysaccharides (SEPS and IEPS), %SML and roughness (Sa) were evaluated. There was an in vitro decrease in pH values in 24h and 48h, compared to baseline. The MSCaNaF and MSNaF groups obtained lower values of %SML and ΔZ (p < 0.05) than CG and NaF after 24h and were similar to NaF after 48h (p<0.05). In situ results showed similar SEPS and IEPS among all groups after 48h. An after 7-days, the nanocomposites had similar values (p>0.05), while NaF was similar to CG (p>0.05). After 48h, the MSCaNaF and MSNaF reduced the %SML (p<0.05). After 7-days, both experimental nanocomposites were similar to NaF (p>0.05). Regarding Sa, MSCaNaF was better than NaF for both periods (p<0.05). The nanocomposites controlled the in vitro and in situ enamel demineralization, mainly in the initial periods.
ABSTRACT
ABSTRACT Objective: To compare the agreement of images in white light (WL), fluorescence (FL), and digital radiographs (DR), on the diagnosis and treatment decisions for occlusal caries lesions against a micro-CT gold standard. Material and Methods: Ten extracted third molars, with enamel and/or dentin caries (ICDAS 2-4), were included. Occlusal surface images were acquired with an intraoral camera (SoproLife®) in WL and FL modes. DR was obtained using an intraoral X-ray and a semi-direct digital system. A total of 780 images were needed, organized in a template, to be later examined by twenty-six dentists invited to compose the study. The Generalized Estimation Equations model was used to compare the proportions of the correct answers between the three methods and the gold standard. When significant, Bonferroni post-hoc test was used to identify differences (α=5%). Results: Most of the examiners were specialists (76.9%) with 14.5 years of experience. All diagnostic methods were similar and showed low agreement (DR 12.7%, WL 16.5%, and FL 16.5%) compared with gold standard caries diagnostic scores. Regarding treatment decisions, mean agreement for all diagnostic methods was higher (43.2%; p<0.001), and among all methods, WL (48.1%) and FL (51.2%) modes performed better than DR (30.4%, p<0.001). Conclusion: SoproLife® images could help clinicians to propose rational, minimally invasive treatments for occlusal caries lesions.
Subject(s)
Humans , Dental Caries/diagnostic imaging , X-Ray Microtomography/methods , Fluorescence , Clinical Decision-Making , Molar, Third/injuries , Effectiveness , In Vitro Techniques/methods , Cross-Sectional Studies/methods , Radiography, Dental, Digital/methodsABSTRACT
ABSTRACT Objective: To associate caregivers' sense of coherence (SOC) and untreated caries with oral health status in children covered by a dental public health system. Material and Methods: A convenience sample of caregivers/children in Angra dos Reis, Brazil, was surveyed. Caregivers' SOC was evaluated using the 13-question version questionnaire. For both caregivers/children, sociodemographic information was acquired and caries experience was evaluated by DMFT/dmft and PUFA/pufa index. Statistical associations between children's untreated carious teeth and interest variables from the caregivers were evaluated by binary logistic regression assessed by generalized linear modeling. Results: A total of 233 pairs of caregivers-children were included. Children's untreated permanent and primary carious teeth represented 34.8% and 62.2% of the caries experience, respectively and at least one PUFA/pufa scored tooth was detected in 22.7% of them. Caregivers' DMFT was 13.5±7.0, while 33.6% scored on PUFA. A total of 62.1% of them presented untreated carious lesions. Results from the univariate model, correlating children's untreated caries and caregivers' attributes showed a statistical significance for SOC values (p<0.015), untreated decayed teeth (p<0.035), self-perception of oral health (p<0.022) and oral impact on daily performance (p<0.010). The multivariate logistic first model kept the statistical significance only for the caregiver's untreated decayed teeth. Conclusion: Caregivers' SOC and untreated carious teeth could be used as indicators of dental treatment needs in their offspring.
Subject(s)
Humans , Male , Female , Child , Adolescent , Adult , Middle Aged , Oral Health/education , Dental Caries/prevention & control , Sense of Coherence , Health Policy , Mother-Child Relations/psychology , Social Perception , Chi-Square Distribution , Logistic Models , Cross-Sectional Studies/methods , Surveys and Questionnaires , Statistics, NonparametricABSTRACT
BACKGROUND: There are diverse opinions among dentists about managing compromised first permanent molars (cFPMs) in children and a perceived lack of guidance to help them evaluate prognosis. AIM: To evaluate the current management of cFPM in children referred to a UK hospital centre and to report the severity of the affected teeth. DESIGN: A service evaluation was undertaken, based on case records of medically fit children (6-11 years) referred to for the management of cFPMs. The presence of hypomineralisation, post-eruptive breakdown and the proposed care plans were recorded. Radiographic signs of severity were scored using the ICDAS index (intra/inter-rater kappa 0.96/0.82). RESULTS: From 349 records screened over a 4-month period, 249 met the selection criteria. Almost 81% were planned to have extraction of at least one cFPM, whereas 19.3% were managed without extraction. More than half of the extraction cases (n = 105) had radiographic radiolucencies not exceeding the middle third of dentine in the worst-affected FPM. At the time of extraction, the mean age of the patients was 9.8 years (±0.9). GA was used in 196 (97.5%) cases, and 40.8% had not received previous treatment in any of their cFPMs. CONCLUSION: Potentially restorable cFPMs in children is, most of the time, in a cohort of UK patients referred for tier 3 services, being managed by timed extractions under general anasethesia.
Subject(s)
Dental Enamel Hypoplasia , Child , Cohort Studies , Dental Enamel Hypoplasia/therapy , Hospitals , Humans , Molar , United KingdomABSTRACT
Abstract Objective: To investigate the association between caries experience and school performance among children and adolescents living in an island community without fluoridated water supply and to compare data according to the type of attended school (full-time or part-time). Material and Methods: A cross-sectional oral health survey in a convenience sample of students (n=147) attending four public schools was performed. Students were examined by one calibrated dentist in the school environment to the obtain prevalence of dental caries (DMFT/dmft) and its consequences using the PUFA/pufa index. Self-reported oral health behavior was also accessed. Data from each student's school performance and absenteeism were extracted from official sources and the school performance was classified into "good" and "fair". The final sample consisted of 120 students. Descriptive statistics, Mann-Whitney, Kruskal-Wallis, chi-square tests and binary logistic regression were performed to evaluate collected data. Results: Students´ age ranged between 5 to 19 years (10±4.3). DMFT/dmft mean were 1.3 (±2.3) and 3.05 (±3.4), respectively. Conclusion: Participants from the full-time school presented better oral health status than their peers in the part-time schools (p<0.05). A significant association was found between the prevalence of caries-free participants and good school performance when the factor age range was controlled (OR=2.87). Moreover, attendance to full-time schools appeared to be a protective factor for good oral health conditions (AU).
Subject(s)
Humans , Male , Female , Child, Preschool , Child , Adolescent , Adult , Water Supply , Health Knowledge, Attitudes, Practice , Oral Health , Dental Caries/prevention & control , Educational Status , Chi-Square Distribution , Logistic Models , DMF Index , Cross-Sectional Studies/methods , Health Surveys/methods , Statistics, NonparametricABSTRACT
Abstract Objective: To evaluate the efficacy of silver diamine fluoride (SDF) in arresting dentin caries lesions when applied under different concentrations and times. Material and Methods: Forty-two bovine blocks were selected and fixed in 24-well plates. Each well received a mixed bacterial inoculum added to the culture medium with 5% sucrose. The plates were incubated in microaerophilia (7 days) for caries formation, confirmed by micro-CT (M1). SDF was applied over the carious lesions for different times and concentrations (n=6): SDF 30% - immediate removal, 1 minute and 3 minutes; SDF 38%, - immediate removal, 1 minute and 3 minutes. The group without treatment was the control. Then, the samples were again scanned by micro-CT (M2) and submitted to a second cariogenic challenge for 21 days. Then, a final scan was performed (M3). Results: Mean pH at the culture medium and lesion depth were compared using Kruskal-Wallis and Wilcoxon tests. 38% SDF showed the lowest metabolic activity of the biofilm. All 38% groups and 30% 1 and 3 minutes did not show an increase in mean lesion depth comparing M3 with M1. However, only 30% 3 minutes and 38% 1 and 3 minutes showed a significant reduction of lesion depth. Conclusion: The minimum application time of 30% SDF to arrest dentin caries lesion was 1 minute, while 38% SDF arrested with application and immediate removal.
Subject(s)
Animals , Cattle , Tooth Remineralization , Cariostatic Agents/therapeutic use , Dental Caries/epidemiology , Dentin , Diamines/chemistry , Fluorides/chemistry , Silver/therapeutic use , In Vitro Techniques/methods , Longitudinal Studies , Statistics, Nonparametric , Biofilms , X-Ray Microtomography/instrumentationABSTRACT
OBJECTIVES: This study aimed to compare and evaluate the porosity and pore size distribution of high-viscosity glass ionomer cements (HVGICs) and conventional glass ionomer cements (GICs) using micro-computed tomography (micro-CT). MATERIALS AND METHODS: Forty cylindrical specimens (n = 10) were produced in standardized molds using HVGICs and conventional GICs (Ketac Molar Easymix, Vitro Molar, MaxxionR, and Riva Self-Cure). The specimens were prepared according to ISO 9917-1 standards, scanned in a high-energy micro-CT device, and reconstructed using specific parameters. After reconstruction, segmentation procedures, and image analysis, total porosity and pore size distribution were obtained for specimens in each group. After checking the normality of the data distribution, the Kruskal-Wallis test followed by the Student-Newman-Keuls test was used to detect differences in porosity among the experimental groups with a 5% significance level. RESULTS: Ketac Molar Easymix showed statistically significantly lower total porosity (0.15%) than MaxxionR (0.62%), Riva (0.42%), and Vitro Molar (0.57%). The pore size in all experimental cements was within the small-size range (< 0.01 mm3), but Vitro Molar showed statistically significantly more pores/defects with a larger size (> 0.01 mm3). CONCLUSIONS: Major differences in porosity and pore size were identified among the evaluated GICs. Among these, the Ketac Molar Easymix HVGIC showed the lowest porosity and void size.
ABSTRACT
This study aimed to evaluate the endodontic instrumentation outcomes with asymmetrical files compared to reciprocating and hand files (HFs) in 3D-printed prototypes of upper primary incisors using micro-computed tomography (micro-CT). For this purpose, 50 prototypes were randomly divided (n = 10) according to the instrumentation technique as follows: HFs, a reciprocating file (WaveOne® Gold [WOG]), and three asymmetrical movement files: XP-Endo® Shaper (XPS), XP-Endo® Finisher (XPF), and XP Clean (XPC). The specimens were scanned and, after registration of the baseline and instrumented volumes, changes in the root canal volume (RCV), debris accumulation, removed root material volume (RRMV), non-instrumented areas, and the presence of cracks/perforations were quantified. Data were analyzed by analysis of variance and Student's t-test, while the effect size was calculated for statistically significant outcomes. All groups showed an increase in RCV after instrumentation (p < 0.05), but this was higher with HFs (p < 0.05). Accumulated debris was higher for WOG and XPS (p < 0.05), but WOG exhibited more in the medium and apical third areas. HFs showed the highest RRMV (p < 0.05), especially at the apical third. The non-instrumented areas were lower for HFs and XPC than for the other systems (p < 0.05). Cracks were present in a few WOG (n = 2) and HF specimens (n = 3) and in this group, one of the cracked specimens and two others showed perforations. The asymmetric systems resulted in conservative dentin removal and fewer cracks/perforations as compared to HFs and a reciprocation file in prototyped primary upper incisors. XPC showed the best compromise between RRMV and non-instrumented areas with a low accumulation of debris.
Subject(s)
Incisor , Root Canal Preparation , Dental Pulp Cavity/diagnostic imaging , Humans , Incisor/diagnostic imaging , Tooth, Deciduous , X-Ray MicrotomographyABSTRACT
This study aimed to evaluate the in vitro effect of a single application of experimental nanocomposite solutions on the prevention of dental caries around orthodontic brackets. The specimens were exposed to mesoporous silica (MS) nanocomposites containing fluoride by association with titanium tetrafluoride (TiF4) or sodium fluoride (NaF). Nanocomposites also could contain calcium and groups were described as MSCaTiF4, MSTiF4, MSCaNaF, MSNaF, and controls (TiF4, and NaF). Specimens were subjected to the formation of a multispecies biofilm to generate a cariogenic challenge. After 24h, both pH and total soluble fluoride concentration of the culture medium were assessed. Mineral loss was evaluated by percentage of surface mineral loss (%SML), mineral volume variation (ΔZ) of inner enamel and polarized light microscopy (PL). Linear (Ra) and volumetric (Sa) surface roughness and scanning electronic microscopy (SEM) were used to assess enamel topography. Statistical analyses were conducted considering p<0.05. MSNaF had the highest value of culture medium pH after cariogenic challenge, similarly to MSTiF4. All nanocomposite solutions released less fluoride than their controls NaF and TiF4 (p<0.05). All nanocomposite solutions presented lower %SML compared to their respective control groups (p<0.05). Lower Ra, Sa and ΔZ were observed for experimental groups compared to TiF4 (p<0.05). The results were confirmed by PL and SEM analysis. The experimental nanocomposite solutions contributed for lower enamel demineralization around orthodontic brackets.
Subject(s)
Dental Caries , Nanocomposites , Orthodontic Brackets , Tooth Demineralization , Cariostatic Agents , Dental Caries/prevention & control , Dental Enamel , Fluorides , Humans , Sodium Fluoride , TitaniumABSTRACT
Abstract This study aimed to evaluate the in vitro effect of a single application of experimental nanocomposite solutions on the prevention of dental caries around orthodontic brackets. The specimens were exposed to mesoporous silica (MS) nanocomposites containing fluoride by association with titanium tetrafluoride (TiF4) or sodium fluoride (NaF). Nanocomposites also could contain calcium and groups were described as MSCaTiF4, MSTiF4, MSCaNaF, MSNaF, and controls (TiF4, and NaF). Specimens were subjected to the formation of a multispecies biofilm to generate a cariogenic challenge. After 24h, both pH and total soluble fluoride concentration of the culture medium were assessed. Mineral loss was evaluated by percentage of surface mineral loss (%SML), mineral volume variation (ΔZ) of inner enamel and polarized light microscopy (PL). Linear (Ra) and volumetric (Sa) surface roughness and scanning electronic microscopy (SEM) were used to assess enamel topography. Statistical analyses were conducted considering p<0.05. MSNaF had the highest value of culture medium pH after cariogenic challenge, similarly to MSTiF4. All nanocomposite solutions released less fluoride than their controls NaF and TiF4 (p<0.05). All nanocomposite solutions presented lower %SML compared to their respective control groups (p<0.05). Lower Ra, Sa and ΔZ were observed for experimental groups compared to TiF4 (p<0.05). The results were confirmed by PL and SEM analysis. The experimental nanocomposite solutions contributed for lower enamel demineralization around orthodontic brackets.
RESUMO Este estudo teve como objetivo avaliar o efeito in vitro de uma única aplicação de soluções experimentais de nanocompósitos na prevenção de cárie dentária em braquetes ortodônticos. Os espécimes foram expostos a nanocompósitos de sílica mesoporosa (MS) contendo fluoreto por associação com tetrafluoreto de titânio (TiF4) ou fluoreto de sódio (NaF). Os nanocompósitos também podem conter cálcio e os grupos foram descritos como MSCaTiF4, MSTiF4, MSCaNaF, MSNaF e controles (TiF4 e NaF). Os espécimes foram submetidos à formação de um biofilme multiespécie para gerar um desafio cariogênico. Após 24h, o pH e a concentração de flúor solúvel total do meio de cultura foram avaliados. A perda mineral foi avaliada pela porcentagem de perda mineral superficial (% SML), variação do volume mineral (ΔZ) do esmalte interno e microscopia de luz polarizada (PL). A rugosidade superficial linear (Ra) e volumétrica (Sa) e a microscopia eletrônica de varredura (MEV) foram utilizadas para avaliar a topografia do esmalte. As análises estatísticas foram realizadas considerando p <0,05. MSNaF apresentou o maior valor de pH do meio de cultura após o desafio cariogênico, semelhante ao MSTiF4. Todas as soluções de nanocompósitos liberaram menos flúor do que seus controles NaF e TiF4 (p <0,05). Todas as soluções de nanocompósitos apresentaram% SML menor em comparação com seus respectivos grupos de controle (p <0,05). Ra, Sa e ΔZ menores foram observados para os grupos experimentais em comparação ao TiF4 (p <0,05). Os resultados foram confirmados por análises PL e SEM. As soluções experimentais de nanocompósitos contribuíram para a menor desmineralização do esmalte ao redor dos braquetes ortodônticos.
Subject(s)
Humans , Tooth Demineralization , Orthodontic Brackets , Dental Caries/prevention & control , Nanocomposites , Sodium Fluoride , Titanium , Cariostatic Agents , Dental Enamel , FluoridesABSTRACT
OBJECTIVE: To fabricate and characterize dental composites with calcium type pre-reacted glass-ionomer (PRG-Ca) fillers. METHODS: PRG-Ca fillers were prepared by the reaction of calcium fluoroaluminosilicate glass with polyacrylic acid. Seven dental composites were produced from the same organic matrix (70/30wt% Bis-GMA/TEGDMA), with partial replacement of barium borosilicate (BaBSi) fillers (60wt%) by PRG-Ca fillers (wt%): E0 (0) - control, E1 (10), E2 (20), E3 (30), E4 (40), E5 (50) and E6 (60). Enamel remineralization was evaluated in caries-like enamel lesions induced by S. mutans biofilm using micro-CT. The following properties were characterized: degree of conversion (DC%), roughness (Ra), Knoop hardness (KHN), flexural strength (FS), flexural modulus (FM), water sorption (Wsp), water solubility (Wsl), and translucency (TP). Data were analyzed to one-way ANOVA and Tukey's HSD test (α=0.05). RESULTS: All composites with PRG-Ca induced enamel remineralization. E0 and E1 presented similar and highest DC% than E2=E3=E4=E5=E6. Ra and KHN were not influenced by PRG-Ca fillers (p<0.05). The higher the content of PRG-Ca, the lower FS, FM and TP (p<0.05). Wsp increased linearly with the content of PRG-Ca fillers (p<0.05). E6 presented the highest Wsl (p<0.05), while the Wsl of the other composites were not different from each other (p>0.05). SIGNIFICANCE: Incorporation of 10-40wt.% of PRG-Ca fillers endowed remineralizing potential to dental composites without jeopardizing the overall behavior of their physicochemical properties. Dental composites with PRG-Ca fillers seems to be a good alternative for reinforcing the enamel against caries development.
Subject(s)
Calcium , Composite Resins , Bisphenol A-Glycidyl Methacrylate , Dental Enamel , Hardness , Materials TestingABSTRACT
O procedimento de pulpectomia em dentes decíduos consiste na remoção total do tecido pulpar com inflamação irreversível ou com necrose, preparo químicomecânico e obturação com material reabsorvível, com o intuito de manter o dente o maior tempo possível na cavidade bucal, devolvendo função e saúde para o paciente infantil. Existem vários protocolos descritos na literatura, no entanto, não há consenso entre eles e poucos possuem acesso livre. Sendo assim, observa-se carência de um guia clínico e prático para nortear o cirurgião-dentista na realização desse procedimento durante o atendimento odontopediátrico. Portanto, o intuito deste trabalho é apresentar aos clínicos um protocolo de pulpectomia com altas frequências de sucesso clínico e radiográfico, baseado em evidências científicas, desenvolvido e aplicado pelo Grupo de Pesquisa de Endodontia em Odontopediatria da Universidade Federal do Rio de Janeiro (GEDOPED-UFRJ). O presente protocolo contempla indicações, contraindicações, tática operatória, materiais necessários e orientações para acompanhamento. Com esta publicação de maneira gratuita, de acesso livre e no idioma dominante do país, espera-se ampliar o alcance de odontopediatras e clínicos gerais que atendem crianças a um tratamento eficaz.
Pulpectomy in primary teeth consists of the complete removal of the irreversibly affected pulp or necrotic pulp tissue, chemical-mechanical preparation of the root dentin and filling root canals with a resorbable material, to keep the tooth as long as possible in the oral cavity, restoring function and health. There are several pulpectomy protocols described in the literature, however, there is no consensus among them and only few of them are open access. Therefore, there is a lack of clinical and practical guides to the practitioner in performing this procedure during pediatric dental care. The aim of this article is to present a clinically and radiographically successful pulpectomy protocol, based on scientific evidence, developed, and applied by the Research Group on Endodontics in Pediatric Dentistry at the Universidade Federal do Rio de Janeiro. This protocol includes indications, contraindications, operative techniques, materials, and guidelines for follow-up appointments. With this open access publication in Portuguese, we hope to disseminate an effective treatment and expand the outreach of a pulpectomy technique protocol to pediatric dentists and clinicians who treat children.
Subject(s)
Pulpectomy , Tooth, Deciduous , Clinical Protocols , Pediatric Dentistry , EndodonticsABSTRACT
Introduction: Minimally invasive dentistry aims to preserve the tooth structure and to achieve this, improved dental materials can be used. Among these, Icon®was developed for infiltration of non-cavitated enamel carious lesions or those located in the external third of dentin. Objective: To report two clinical cases in which Icon® was used to treat interproximal caries lesions in primary and permanent teeth. Case report: Two patients (10 and 13 years) attended the Pediatric Dental Clinic and the clinical and radiographic examination revealed non-cavitated enamel carious lesions and outer third of dentin on teeth 54 distal (D) and 55 mesial (M) (Patient 1), and teeth 24D and 25M (Patient 2), respectively. To restore the lesions, a resin infiltrant (Icon®) was used under rubber dam isolationand according to the manufacturer's recommendations. Results: The patients were assessed immediately after restoration, when complete sealing of the lesion was observed. Patient 1 returned for clinical and radiographic evaluation after 3 months and patient 2 returned after one month, where arrest of the carious lesions was detected. Conclusion: It is concluded that Icon® can be a good option of minimally invasive restorative material, with good applicability in Pediatric Dentistry.
Introdução: A odontologia minimamente invasiva visa maior preservação da estrutura dentária e novos materiais odontológicos vêm sendo utilizados para este fim. Dentre esses, o Icon® foi desenvolvido para infiltração de lesões de cárie não cavitadas localizadas em esmalte e/ou no terço externo de dentina. Objetivo: Relatar dois casos clínicos em que se utilizou o Icon® para tratamento de lesões de cárie interproximais em dentes decíduos e permanentes. Relato do caso: Dois pacientes (10 e 13 anos) compareceram à clínica de Odontopediatriada FO-UFRJ e ao exame clínico e radiográfico foram diagnosticadas lesões cariosas não cavitadas no terço externo de dentina e no esmalte dentário, nos dentes 54 distal (D) e 55 mesial (M) (Paciente 1) e dentes 24D e 25M (Paciente 2), respectivamente. Para restauração das lesões, foi utilizado o infiltrante de resina Icon® sob isolamento absoluto e de acordo com as recomendações do fabricante. Resultados: Os pacientes foram avaliados imediatamente após a restauração e observou-se um completo selamento da lesão. O paciente 1 retornou para avaliação clínica e radiográfica após 3 meses e o paciente 2 após 1 mês. Em ambos foi detectada paralisação da lesão cariosa. Conclusão: Conclui-se que o Icon® representa uma boa opção de material restaurador minimamente invasivo e com boa aplicabilidade em Odontopediatria.
Subject(s)
Pediatric Dentistry , Dental Caries , Dental MaterialsABSTRACT
Minimally invasive (MI) concepts in restorative dentistry in the year 2020 request from the practitioner not only a scientifically supported rationale for carious tissue removal/excavation and defect-oriented, biological cavity preparation, but also a deep understanding of how to ensure a biomechanically stable and durable restoration in different clinical situations by applying different restorative options. Bio-interactive materials play an increasingly relevant role, as they not only replace diseased or lost tissue, but also optimise tissue mineral recovery (among other properties) when used in restorative and preventive dentistry. Indeed, this is of certain interest in MI restorative dentistry, especially in those cases where gap formation jeopardises the integrity of the margins along resin composite restorations, causing penetration of bacteria and eventually promoting the formation of secondary caries. Recently, the interest in whether ion-releasing materials may reduce such biofilm penetration into margin gaps and reduce such a risk for development and propagation of secondary caries is growing significantly among clinicians and scientists. The aim of this article was to explore mechanisms involved in the process that allow mineral deposition at the interface between such materials and dentine, and to describe how conventional 'bioactive' restorative materials currently available on the market may benefit treatments in MI dentistry.