Homogeneous in-plane WSe2 P-N junctions for advanced optoelectronic devices.

Conventional doping schemes of silicon (Si) microelectronics are incompatible with atomically thick two-dimensional (2D) transition metal dichalcogenides (TMDCs), which makes it challenging to construct high-quality 2D homogeneous p-n junctions. Herein, we adopt a simple yet effective plasma-treated doping method to seamlessly construct a lateral 2D WSe2 p-n homojunction. WSe2 with ambipolar transport properties was exposed to O2 plasma to form WOx on the surface in a self-limiting process that induces hole doping in the underlying WSe2via electron transfer. Different electrical behaviors were observed between the as-exfoliated (ambipolar) region and the O2 plasma-treated (p-doped) region under electrostatic modulation of the back-gate bias (VBG), which produces a p-n in-plane homojunction. More importantly, a small contact resistance of 710 Ω µm with a p-doped region transistor mobility of ∼157 cm2 V-1 s-1 was achieved due to the transformation of Schottky contact into Ohmic contact after plasma treatment. This effectively avoids Fermi-level pinning and significantly improves the performance of photodetectors. The resultant WSe2 p-n junction device thus exhibits a high photoresponsivity of ∼7.1 × 104 mA W-1 and a superior external quantum efficiency of ∼228%. Also, the physical mechanism of charge transfer in the WSe2 p-n homojunction was analyzed. Our proposed strategy offers a powerful route to realize low contact resistance and high photoresponsivity in 2D TMDC-based optoelectronic devices, paving the way for next-generation atomic-thickness optoelectronics.

Modulation of Spin Dynamics in 2D Transition-Metal Dichalcogenide via Strain-Driven Symmetry Breaking.

Transition metal dichalcogenides (TMDs) possess intrinsic spin-orbit interaction (SOI) with high potential to be exploited for various quantum phenomena. SOI allows the manipulation of spin degree of freedom by controlling the carrier's orbital motion via mechanical strain. Here, strain modulated spin dynamics in bilayer MoS2 field-effect transistors (FETs) fabricated on crested substrates are demonstrated. Weak antilocalization (WAL) is observed at moderate carrier concentrations, indicating additional spin relaxation path caused by strain fields arising from substrate crests. The spin lifetime is found to be inversely proportional to the momentum relaxation time, which follows the Dyakonov-Perel spin relaxation mechanism. Moreover, the spin-orbit splitting is obtained as 37.5 ± 1.4 meV, an order of magnitude larger than the theoretical prediction for monolayer MoS2 , suggesting the strain enhanced spin-lattice coupling. The work demonstrates strain engineering as a promising approach to manipulate spin degree of freedom toward new functional quantum devices.

Dynamic Tuning of Moiré Superlattice Morphology by Laser Modification.

In artificial van der Waals (vdW) layered devices, twisting the stacking angle has emerged as an effective strategy to regulate the electronic phases and optical properties of these systems. Along with the twist registry, the lattice reconstruction arising from vdW interlayer interaction has also inspired significant research interests. The control of twist angles is significantly important because the moiré periodicity determines the electron propagation length on the lattice and the interlayer electron-electron interactions. However, the moiré periodicity is hard to be modified after the device has been fabricated. In this work, we have demonstrated that the moiré periodicity can be precisely modulated with a localized laser annealing technique. This is achieved with regulating the interlayer lattice mismatch by the mismatched lattice constant, which originates from the variable density of sulfur vacancy generated during laser modification. The existence of sulfur vacancy is further verified by excitonic emission energy and lifetime in photoluminescence measurements. Furthermore, we also discover that the mismatched lattice constant has the equivalent contribution as the twist angle for determining the lattice mismatch. Theoretical modeling elaborates the moiré-wavelength-dependent energy variations at the interface and mimics the evolution of moiré morphology.

Upcycling Silicon Photovoltaic Waste into Thermoelectrics.

Two decades after the rapid expansion of photovoltaics, the number of solar panels reaching end-of-life is increasing. While precious metals such as silver and copper are usually recycled, silicon, which makes up the bulk of a solar cells, goes to landfills. This is due to the defect- and impurity-sensitive nature in most silicon-based technologies, rendering it uneconomical to purify waste silicon. Thermoelectrics represents a rare class of material in which defects and impurities can be engineered to enhance the performance. This is because of the majority-carrier nature, making it defect- and impurity-tolerant. Here, the upcycling of silicon from photovoltaic (PV) waste into thermoelectrics is enabled. This is done by doping 1% Ge and 4% P, which results in a figure of merit (zT) of 0.45 at 873 K, the highest among silicon-based thermoelectrics. The work represents an important piece of the puzzle in realizing a circular economy for photovoltaics and electronic waste.

Thermoelectric Properties of Substoichiometric Electron Beam Patterned Bismuth Sulfide.

Direct patterning of thermoelectric metal chalcogenides can be challenging and is normally constrained to certain geometries and sizes. Here we report the synthesis, characterization, and direct writing of sub-10 nm wide bismuth sulfide (Bi2S3) using a single-source, spin-coatable, and electron-beam-sensitive bismuth(III) ethylxanthate precursor. In order to increase the intrinsically low carrier concentration of pristine Bi2S3, we developed a self-doping methodology in which sulfur vacancies are manipulated by tuning the temperature during vacuum annealing, to produce an electron-rich thermoelectric material. We report a room-temperature electrical conductivity of 6 S m-1 and a Seebeck coefficient of -21.41 µV K-1 for a directly patterned, substoichiometric Bi2S3 thin film. We expect that our demonstration of directly writable thermoelectric films, with further optimization of structure and morphology, can be useful for on-chip applications.

Large enhancement of thermoelectric performance in MoS2/h-BN heterostructure due to vacancy-induced band hybridization.

Local impurity states arising from atomic vacancies in two-dimensional (2D) nanosheets are predicted to have a profound effect on charge transport due to resonant scattering and can be used to manipulate thermoelectric properties. However, the effects of these impurities are often masked by external fluctuations and turbostratic interfaces; therefore, it is challenging to probe the correlation between vacancy impurities and thermoelectric parameters experimentally. In this work, we demonstrate that n-type molybdenum disulfide (MoS2) supported on hexagonal boron nitride (h-BN) substrate reveals a large anomalous positive Seebeck coefficient with strong band hybridization. The presence of vacancies on MoS2 with a large conduction subband splitting of 50.0 ± 5.0 meV may contribute to Kondo insulator-like properties. Furthermore, by tuning the chemical potential, the thermoelectric power factor can be enhanced by up to two orders of magnitude to 50 mW m-1 K-2 Our work shows that defect engineering in 2D materials provides an effective strategy for controlling band structure and tuning thermoelectric transport.

Effects Of Structural Phase Transition On Thermoelectric Performance in Lithium-Intercalated Molybdenum Disulfide (Li xMoS2).

Layered transition metal dichalcogenides (TMDCs) intercalated with alkali metals exhibit mixed metallic and semiconducting phases with variable fractions. Thermoelectric properties of such mixed-phase structure are of great interest because of the potential energy filtering effect, wherein interfacial energy barriers strongly scatter cold carriers rather than hot carriers, leading to enhanced Seebeck coefficient ( S). Here, we study the thermoelectric properties of mixed-phase Li xMoS2 as a function of its phase composition tuned by in situ thermally driven deintercalation. We find that the sign of Seebeck coefficient changes from positive to negative during initial reduction of the 1T/1T' phase fraction, indicating crossover from p- to n-type carrier conduction. These anomalous changes in Seebeck coefficient, which cannot be simply explained by the effect of deintercalation-induced reduction in carrier density, can be attributed to the hybrid electronic property of the mixed-phase Li xMoS2. Our work shows that careful phase engineering is a promising route toward achieving thermoelectric performance in TMDCs.