Variable-heavy (VH) families influencing IgA1&2 engagement to the antigen, FcαRI and superantigen proteins G, A, and L.

Interest in IgA as an alternative antibody format has increased over the years with much remaining to be investigated in relation to interactions with immune cells. Considering the recent whole antibody investigations showing significant distal effects between the variable (V) and constant (C)- regions that can be mitigated by the hinge regions of both human IgA subtypes A1 and A2, we performed an in-depth mechanistic investigation using a panel of 28 IgA1s and A2s of both Trastuzumab and Pertuzumab models. FcαRI binding were found to be mitigated by the differing glycosylation patterns in IgA1 and 2 with contributions from the CDRs. On their interactions with antigen-Her2 and superantigens PpL, SpG and SpA, PpL was found to sterically hinder Her2 antigen binding with unexpected findings of IgAs binding SpG at the CH2-3 region alongside SpA interacting with IgAs at the CH1. Although the VH3 framework (FWR) is commonly used in CDR grafting, we found the VH1 framework (FWR) to be a possible alternative when grafting IgA1 and 2 owing to its stronger binding to antigen Her2 and weaker interactions to superantigen Protein L and A. These findings lay the foundation to understanding the interactions between IgAs and microbial superantigens, and also guide the engineering of IgAs for future antibody applications and targeting of superantigen-producing microbes.

More Than Meets the Kappa for Antibody Superantigen Protein L (PpL).

Immunoglobulin superantigens play an important role in affinity purification of antibodies and the microbiota-immune axis at mucosal areas. Based on current understanding, Staphylococcal Protein A (SpA), Streptococcal Protein G (SpG) and Finegoldia Protein L (PpL) are thought to only bind specific regions of human antibodies, allowing for selective purification of antibody isotypes and chains. Clinically, these superantigens are often classified as toxins and increase the virulence of the producing pathogen through unspecific interactions with immune proteins. To perform an in-depth interaction study of these three superantigens with antibodies, bio-layer interferometry (BLI) measurements of their interactions with a permutation panel of 63 IgG1 variants of Pertuzumab and Trastuzumab CDRs grafted to the six human Vκ and seven human VH region families were tested. Through this holistic and systemic analysis of IgG1 variants with various antibody regions modified, comparisons revealed novel PpL-antibody interactions influenced by other non-canonical antibody known light-chain framework regions, whereas SpA and SpG showed relatively consistent interactions. These findings have implications on PpL-based affinity antibody purification and design that can guide the engineering and understanding of PpL-based microbiota-immune effects.

Essentially Leading Antibody Production: An Investigation of Amino Acids, Myeloma, and Natural V-Region Signal Peptides in Producing Pertuzumab and Trastuzumab Variants.

Boosting the production of recombinant therapeutic antibodies is crucial in both academic and industry settings. In this work, we investigated the usage of varying signal peptides by antibody V-genes and their roles in recombinant transient production, systematically comparing myeloma and the native signal peptides of both heavy and light chains in 168 antibody permutation variants. We found that amino acids count and types (essential or non-essential) were important factors in a logistic regression equation model for predicting transient co-transfection protein production rates. Deeper analysis revealed that the culture media were often incomplete and that the supplementation of essential amino acids can improve the recombinant protein yield. While these findings are derived from transient HEK293 expression, they also provide insights to the usage of the large repertoire of antibody signal peptides, where by varying the number of specific amino acids in the signal peptides attached to the variable regions, bottlenecks in amino acid availability can be mitigated.

The quantification of antibody elements and receptors subunit expression using qPCR: The design of VH, VL, CH, CL, FcR subunits primers for a more holistic view of the immune system.

The expression levels of immunoglobulin elements and their receptors are important markers for health and disease. Within the immunoglobulin locus, the constant regions and the variable region families are associated with certain pathologies, yet a holistic view of the interaction between the expressions of the multiple genes remain to be fully characterized. There is thus an important need to quantify antibody elements, their receptors and the receptor subunits in blood (PBMC cDNA) for both screening and detailed studies of such associations. Leveraging on qPCR, we designed primers for all Vκ1-6, VH1-7, Vλ1-11, nine CH isotypes, Cκ, Cκ, Cλ1 &3, FcεRI α,ß, and γ subunits, all three FcγR and their subunits, and FcαR. Validating this on a volunteer PBMC cDNA, we report a qPCR primer set repertoire that can quantify the relative expression of all the above genes to the GAPDH housekeeping gene, with implications and uses in both clinical monitoring and research.

Novel bioreactors for the culture and expansion of aggregative neural stem cells.

Neural stem cells have been cultured as three-dimensional aggregates in a number of different types of bioreactors. The design and configuration of the bioreactor are shown to be crucial factors for the successful propagation of the cells. A novel bioreactor with liquid re-circulation and a working volume of 200 ml has been designed, tested and shown to be able to produce a higher cell vitality compared to those produced in multi-well plates, shake flasks and stirred flasks. The novel reactor was able to produce a total density of cells of 3.5 x 10(6) cells/ml consisting of a larger number of smaller and proliferative aggregates, compared to only 1.8 x 10(6) cells/ml produced in a multi-well plate. Shake flasks and stirred flasks commonly used for facilitating mass transfer in the culture of micro-organisms are shown to be unsuitable for the propagation of neural stem cells.

Separation and enrichment of neural stem cells using segregation in an expanded bed.

An expanded bed system has been developed for a novel application in which the separation and enrichment of neural stem cells from a sample containing a mixture of stem and progenitor cells is achieved based on the difference in the sizes of the aggregates of these types of cells. Inert Sephadex beads and flocculated yeast cells were used as experimental controls and references. The characteristics of the separation of neural stem cell aggregates based on size are similar to those achieved with flocculated yeast where cell-to-cell aggregation controls the pattern of size separation different from those of inert Sephadex beads.

Influence of surface properties on the mechanism of H2S removal by alkaline activated carbons.

Alkaline activated carbons are widely used as adsorbents of hydrogen sulfide (H2S), one of the major odorous compounds arising from sewage treatment facilities. Although a number of studies have explored the effects of various parameters, mechanisms of H2S adsorption by alkaline carbons are not yet fully understood. The major difficulty seems to lie in the fact that little is known with certainty about the predominant reactions occurring on the carbon surface. In this study, the surface properties of alkaline activated carbons were systematically investigated to further exploit and better understand the mechanisms of H2S adsorption by alkaline activated carbons. Two commercially available alkaline activated carbons and their representative exhausted samples (8 samples collected at different height of the column after H2S breakthrough tests) were studied. The 8 portions of the exhausted carbon were used to represent the H2S/carbon reaction process. The surface properties of both the original and the exhausted carbons were characterized using the sorption of nitrogen (BET test), surface pH, Boehm titration, thermal and FTIR analysis. Porosity and surface area provide detailed information about the pore structure of the exhausted carbons with respect to the reaction extent facilitating the understanding of potential pore blockages. Results of Boehm titration and FTIR both demonstrate the significant effects of surface functional groups, and identification of oxidation products confirmed the different mechanisms involved with the two carbons. From the DTG curves of thermal analysis, two well-defined peaks representing two products of surface reactions (i.e., sulfur and sulfuric acid) were observed from the 8 exhausted portions with gradually changing patterns coinciding with the extent of the reaction. Surface pH values of the exhausted carbons show a clear trend of pH drop along the reaction extent, while pH around 2 was observed for the bottom of the bed indicating sulfuric acid as the predominant products. Although both carbons are coal-based and of KOH impregnated type, performances of different carbons differ significantly. A correlation is well established to link the reaction extent with various surface properties. In summary, not only the homogeneous alkali impregnation and physical porosity but also the carbon surface chemistry are significant factors influencing the performances of alkaline activated carbons as H2S adsorbents.