Novel chitosan-zeolite X composite beads prepared by phase-inversion method for CO2 adsorptive capture.

The urgent need to mitigate carbon emissions from industrial heat production has led to the exploration of novel carbon-based materials for carbon capture. Chitosan, a versatile framework, has been widely utilized for embedding many materials such as grafted graphene oxide, zeolite, and activated carbon to enhance the carbon capture capacity of diverse carbon-based materials. Remarkably, the combination of chitosan and zeolite overcomes the inherent drawbacks of powdery zeolite, resulting in improved stability and efficiency in carbon capture applications. In this study, zeolite X-chitosan composite was successfully synthesized using phase inversion method followed by solvent exchange and air drying. The synthesis procedure described in this study presents a notable advantage in terms of simplicity and ease of fabrication. The combination of SEM and XRD analyses provided evidence that the composite exhibited a uniform arrangement of zeolite within the chitosan framework and maintained the original properties of the powdered zeolite. The adsorption capacity of the composite was first investigated by varying mass ratio of zeolite per chitosan. The composite with mass ratio that gave the best adsorption capacity were then tested under various temperatures (-20 °C, 0 °C, 30 °C, and 50 °C) and pressures (1 kPa, 3 kPa, 5 kPa, and 30 kPa). The application of different adsorption models was also employed to simulate the breakthrough curves. Furthermore, the material also underwent multiple continuous adsorption-desorption cycles showing its potential for repeated rechargeability. In contrast, the synthesis and characterization of copper ion-exchanged composite yielded significant drop in adsorption capacity, likely due to the formation of ligands or the inherent reactivity of Cu2+ ions towards hydroxide.

Intersection of Immunity, Metabolism, and Muscle Regeneration in an Autoimmune-Prone MRL Mouse Model.

Due to the limited capacity of mammals to regenerate complex tissues, researchers have worked to understand the mechanisms of tissue regeneration in organisms that maintain that capacity. One example is the MRL/MpJ mouse strain with unique regenerative capacity in ear pinnae that is absent from other strains, such as the common C57BL/6 strain. The MRL/MpJ mouse has also been associated with an autoimmune phenotype even in the absence of the mutant Fas gene described in its parent strain MRL/lpr. Due to these findings, the differences between the responses of MRL/MpJ versus C57BL/6 strain are evaluated in volumetric muscle injury and subsequent material implantation. One salient feature of the MRL/MpJ response to injury is robust adipogenesis within the muscle. This is associated with a decrease in M2-like polarization in response to biologically derived extracellular matrix scaffolds. In pro-fibrotic materials, such as polyethylene, there are fewer foreign body giant cells in the MRL/MpJ mice. As there are reports of both positive and negative influences of adipose tissue and adipogenesis on wound healing, this model can provide an important lens to investigate the interplay between stem cells, adipose tissue, and immune responses in trauma and material implantation.

Pro-regenerative biomaterials recruit immunoregulatory dendritic cells after traumatic injury.

During wound healing and surgical implantation, the body establishes a delicate balance between immune activation to fight off infection and clear debris and immune tolerance to control reactivity against self-tissue. Nonetheless, how such a balance is achieved is not well understood. Here we describe that pro-regenerative biomaterials for muscle injury treatment promote the proliferation of a BATF3-dependent CD103+XCR1+CD206+CD301b+ dendritic cell population associated with cross-presentation and self-tolerance. Upregulation of E-cadherin, the ligand for CD103, and XCL-1 in injured tissue suggests a mechanism for cell recruitment to trauma. Muscle injury recruited natural killer cells that produced Xcl1 when stimulated with fragmented extracellular matrix. Without cross-presenting cells, T-cell activation increases, pro-regenerative macrophage polarization decreases and there are alterations in myogenesis, adipogenesis, fibrosis and increased muscle calcification. These results, previously observed in cancer progression, suggest a fundamental mechanism of immune regulation in trauma and material implantation with implications for both short- and long-term injury recovery.

Ectopic adipogenesis in response to injury and material implantation in an autoimmune mouse model.

Due to the limited capacity of mammals to regenerate complex tissues, researchers have worked to understand the mechanisms of tissue regeneration in organisms that maintain that capacity. One example is the MRL/MpJ mouse strain with unique regenerative capacity in ear pinnae that is absent from other strains, such as the common C57BL/6 strain. The MRL/MpJ mouse has also been associated with an autoimmune phenotype even in the absence of the mutant Fas gene described in its parent strain MRL/lpr. Due to these findings, we evaluated the differences between the responses of MRL/MpJ versus C57BL/6 strain in traumatic muscle injury and subsequent material implantation. One salient feature of the MRL/MpJ response to injury was a robust adipogenesis within the muscle. This was associated with a decrease in M2-like polarization in response to biologically derived extracellular matrix scaffolds. In pro-fibrotic materials, such as polyethylene, there were fewer foreign body giant cells in the MRL/MpJ mice. As there are reports of both positive and negative influences of adipose tissue and adipogenesis on wound healing, this model could provide an important lens to investigate the interplay between stem cells, adipose tissue, and immune responses in trauma and materials implantation.

Dynamics of SARS-CoV-2 Seroprevalence in a Large US population Over a Period of 12 Months.

Due to a combination of asymptomatic or undiagnosed infections, the proportion of the United States population infected with SARS-CoV-2 was unclear from the beginning of the pandemic. We previously established a platform to screen for SARS-CoV-2 positivity across a representative proportion of the US population, from which we reported that almost 17 million Americans were estimated to have had undocumented infections in the Spring of 2020. Since then, vaccine rollout and prevalence of different SARS-CoV-2 variants have further altered seropositivity trends within the United States population. To explore the longitudinal impacts of the pandemic and vaccine responses on seropositivity, we re-enrolled participants from our baseline study in a 6- and 12- month follow-up study to develop a longitudinal antibody profile capable of representing seropositivity within the United States during a critical period just prior to and during the initiation of vaccine rollout. Initial measurements showed that, since July 2020, seropositivity elevated within this population from 4.8% at baseline to 36.2% and 89.3% at 6 and 12 months, respectively. We also evaluated nucleocapsid seropositivity and compared to spike seropositivity to identify trends in infection versus vaccination relative to baseline. These data serve as a window into a critical timeframe within the COVID-19 pandemic response and serve as a resource that could be used in subsequent respiratory illness outbreaks.

Conserved and tissue-specific immune responses to biologic scaffold implantation.

Upon implantation into a patient, any biomaterial induces a cascade of immune responses that influences the outcome of that device. This cascade depends upon several factors, including the composition of the material itself and the location in which the material is implanted. There is still significant uncertainty around the role of different tissue microenvironments in the immune response to biomaterials and how that may alter downstream scaffold remodeling and integration. In this study, we present a study evaluating the immune response to decellularized extracellular matrix materials within the intraperitoneal cavity, the subcutaneous space, and in a traumatic skeletal muscle injury microenvironment. All different locations induced robust cellular recruitment, specifically of macrophages and eosinophils. The latter was most prominent in the subcutaneous space. Intraperitoneal implants uniquely recruited B cells that may alter downstream reactivity as adaptive immunity has been strongly implicated in the outcome of scaffold remodeling. These data suggest that the location of tissue implants should be taken together with the composition of the material itself when designing devices for downline therapeutics.

Exploring the Emotional Functions of Co-Speech Hand Gesture in Language and Communication.

Research over the past four decades has built a convincing case that co-speech hand gestures play a powerful role in human cognition . However, this recent focus on the cognitive function of gesture has, to a large extent, overlooked its emotional role-a role that was once central to research on bodily expression. In the present review, we first give a brief summary of the wealth of research demonstrating the cognitive function of co-speech gestures in language acquisition, learning, and thinking. Building on this foundation, we revisit the emotional function of gesture across a wide range of communicative contexts, from clinical to artistic to educational, and spanning diverse fields, from cognitive neuroscience to linguistics to affective science. Bridging the cognitive and emotional functions of gesture highlights promising avenues of research that have varied practical and theoretical implications for human-machine interactions, therapeutic interventions, language evolution, embodied cognition, and more.

Label-free cleared tissue microscopy and machine learning for 3D histopathology of biomaterial implants.

Tissue clearing of whole intact organs has enhanced imaging by enabling the exploration of tissue structure at a subcellular level in three-dimensional space. Although clearing and imaging of the whole organ have been used to study tissue biology, the microenvironment in which cells evolve to adapt to biomaterial implants or allografts in the body is poorly understood. Obtaining high-resolution information from complex cell-biomaterial interactions with volumetric landscapes represents a key challenge in the fields of biomaterials and regenerative medicine. To provide a new approach to examine how tissue responds to biomaterial implants, we apply cleared tissue light-sheet microscopy and three-dimensional reconstruction to utilize the wealth of autofluorescence information for visualizing and contrasting anatomical structures. This study demonstrates the adaptability of the clearing and imaging technique to provide sub-cellular resolution (0.6 µm isotropic) 3D maps of various tissue types, using samples from fully intact peritoneal organs to volumetric muscle loss injury specimens. Specifically, in the volumetric muscle loss injury model, we provide 3D visualization of the implanted extracellular matrix biomaterial in the wound bed of the quadricep muscle groups and further apply computational-driven image classification to analyze the autofluorescence spectrum at multiple emission wavelengths to categorize tissue types at the injured site interacting with the biomaterial scaffolds.

Development of a High-Color Flow Cytometry Panel for Immunologic Analysis of Tissue Injury and Reconstruction in a Rat Model.

The rat model is an important resource in biomedical research due to its similarities to the human immune system and its use for functional studies. However, because of the preponderance of mouse models in foundational and mechanistic immunological studies, there is a relative lack of diverse, commercially available flow cytometry antibodies for immunological profiling in the rat model. Available antibodies are often conjugated to common fluorophores with similar peak emission wavelengths, making them hard to distinguish on conventional flow cytometers and restricting more comprehensive immune analysis. This can become a limitation when designing immunological studies in rat injury models to investigate the immune response to tissue injury. In addition, this lack of available antibodies limits the number of studies that can be done on the immune populations in lymphoid organs in other research areas. To address this critical unmet need, we designed a spectral flow cytometry panel for rat models. Spectral cytometry distinguishes between different fluorophores by capturing their full emission spectra instead of their peak emission wavelengths. This flow cytometry panel includes 24 distinct immune cell markers to analyze the innate and adaptive immune response. Importantly, this panel identifies different immune phenotypes, including tolerogenic, Type 1, and Type 2 immune responses. We show that this panel can identify unique immune populations and phenotypes in a rat muscle trauma model. We further validated that the panel can identify distinct adaptive and innate immune populations and their unique phenotypes in lymphoid organs. This panel expands the scope of previous rat panels providing a tool for scientists to examine the immune system in homeostasis and injury while pairing mechanistic immunological studies with functional studies.

Chlorogenic Acid Inhibition of Esophageal Squamous Cell Carcinoma Metastasis via EGFR/p-Akt/Snail Signaling Pathways.

BACKGROUND/AIM: Chlorogenic acid (CGA) is a polyphenol compound found in a variety of foods, including coffee, tea, cherries, and apples. It has been found by a number of studies to affect the viability of human cancer cells. No study has investigated its effect on esophageal squamous cell carcinoma (ESCC) metastasis or the molecular mechanism underlying its effect on this disease. MATERIALS AND METHODS: We first used the Taiwanese ESCC cell line CE81T/VGH to create CE81T-M4 cells. Treatment of higher motility cells with chlorogenic acid for 24 h led to inhibition of cell migration and invasion as shown by scratch migration and transwell assays. RESULTS: Western blotting showed that chlorogenic acid halted the activation of EGFR/p-Akt/Snail pathway and suppressed the expression of MMP-2 and MMP-9. Knockdown of either EGFR or Akt inhibited Snail, MMP2, and MMP9 activity as well as cell migration and invasion. CONCLUSION: Chlorogenic acid inhibited cancer cell motility via the EGFR/p-Akt/Snail pathway and could potentially be used to develop an antimetastatic agent for ESCC in the future.

Mobilizing Endogenous Repair Through Understanding Immune Reaction With Biomaterials.

With few exceptions, humans are incapable of fully recovering from severe physical trauma. Due to these limitations, the field of regenerative medicine seeks to find clinically viable ways to repair permanently damaged tissue. There are two main approaches to regenerative medicine: promoting endogenous repair of the wound, or transplanting a material to replace the injured tissue. In recent years, these two methods have fused with the development of biomaterials that act as a scaffold and mobilize the body's natural healing capabilities. This process involves not only promoting stem cell behavior, but by also inducing activity of the immune system. Through understanding the immune interactions with biomaterials, we can understand how the immune system participates in regeneration and wound healing. In this review, we will focus on biomaterials that promote endogenous tissue repair, with discussion on their interactions with the immune system.

SARS-CoV-2 Seroprevalence and Drug Use in Trauma Patients from Six Sites in the United States.

In comparison to the general patient population, trauma patients show higher level detections of bloodborne infectious diseases, such as Hepatitis and Human Immunodeficiency Virus. In comparison to bloodborne pathogens, the prevalence of respiratory infections such as SARS-CoV-2 and how that relates with other variables, such as drug usage and trauma type, is currently unknown in trauma populations. Here, we evaluated SARS-CoV-2 seropositivity and antibody isotype profile in 2,542 trauma patients from six Level-1 trauma centers between April and October of 2020 during the first wave of the COVID-19 pandemic. We found that the seroprevalence in trauma victims 18-44 years old (9.79%, 95% confidence interval/CI: 8.33 - 11.47) was much higher in comparison to older patients (45-69 years old: 6.03%, 4.59-5.88; 70+ years old: 4.33%, 2.54 - 7.20). Black/African American (9.54%, 7.77 - 11.65) and Hispanic/Latino patients (14.95%, 11.80 - 18.75) also had higher seroprevalence in comparison, respectively, to White (5.72%, 4.62 - 7.05) and Non-Latino patients (6.55%, 5.57 - 7.69). More than half (55.54%) of those tested for drug toxicology had at least one drug present in their system. Those that tested positive for narcotics or sedatives had a significant negative correlation with seropositivity, while those on anti-depressants trended positive. These findings represent an important consideration for both the patients and first responders that treat trauma patients facing potential risk of respiratory infectious diseases like SARS-CoV-2.

Undiagnosed SARS-CoV-2 seropositivity during the first 6 months of the COVID-19 pandemic in the United States.

Asymptomatic SARS-CoV-2 infection and delayed implementation of diagnostics have led to poorly defined viral prevalence rates in the United States and elsewhere. To address this, we analyzed seropositivity in 9089 adults in the United States who had not been diagnosed previously with COVID-19. Individuals with characteristics that reflected the U.S. population (n = 27,716) were selected by quota sampling from 462,949 volunteers. Enrolled participants (n = 11,382) provided medical, geographic, demographic, and socioeconomic information and dried blood samples. Survey questions coincident with the Behavioral Risk Factor Surveillance System survey, a large probability-based national survey, were used to adjust for selection bias. Most blood samples (88.7%) were collected between 10 May and 31 July 2020 and were processed using ELISA to measure seropositivity (IgG and IgM antibodies against SARS-CoV-2 spike protein and the spike protein receptor binding domain). The overall weighted undiagnosed seropositivity estimate was 4.6% (95% CI, 2.6 to 6.5%), with race, age, sex, ethnicity, and urban/rural subgroup estimates ranging from 1.1% to 14.2%. The highest seropositivity estimates were in African American participants; younger, female, and Hispanic participants; and residents of urban centers. These data indicate that there were 4.8 undiagnosed SARS-CoV-2 infections for every diagnosed case of COVID-19, and an estimated 16.8 million infections were undiagnosed by mid-July 2020 in the United States.

T lymphocytes as critical mediators in tissue regeneration, fibrosis, and the foreign body response.

Research on the foreign body response (FBR) to biomaterial implants has been focused on the roles that the innate immune system has on mediating tolerance or rejection of implants. However, the immune system also involves the adaptive immune response and it must be included in order to form a complete picture of the response to biomaterials and medical implants. In this review, we explore recent understanding about the roles of adaptive immune cells, specifically T cells, in modulating the immune response to biomaterial implants. The immune response to implants elicits a delicate balance between tissue repair and fibrosis that is mainly regulated by three types of T helper cell responses -T helper type 1, T helper type 2, and T helper type 17- and their crosstalk with innate immune cells. Interestingly, many T cell response mechanisms to implants overlap with the process of fibrosis or repair in different tissues. This review explores the fibrotic and regenerative T cell biology and draws parallels to T cell responses to biomaterials. Additionally, we also explore the biomedical engineering advancements in biomaterial applications in designing particle and scaffold systems to modulate T cell activity for therapeutics and devices. Not only do the deliberate engineering design of physical and chemical material properties and the direct genetic modulation of T cells not only offer insights to T cell biology, but they also present different platforms to develop immunomodulatory biomaterials. Thus, an in-depth understanding of T cells' roles can help to navigate the biomaterial-immune interactions and reconsider the long-lasting adaptive immune response to implants, which, in the end, contribute to the design of immunomodulatory medical implants that can advance the next generation of regenerative therapy. STATEMENT OF SIGNIFICANCE: This review article integrates knowledge of adaptive immune responses in tissue damage, wound healing, and medical device implantation. These three fields, often not discussed in conjunction, are important to consider when evaluating and designing biomaterials. Through incorporation of basic biological research alongside engineering research, we provide an important lens through which to evaluate adaptive immune contributions to regenerative medicine and medical device development.

Mapping a Pandemic: SARS-CoV-2 Seropositivity in the United States.

Asymptomatic SARS-CoV-2 infection and delayed implementation of diagnostics have led to poorly defined viral prevalence rates. To address this, we analyzed seropositivity in US adults who have not previously been diagnosed with COVID-19. Individuals with characteristics that reflect the US population (n = 11,382) and who had not previously been diagnosed with COVID-19 were selected by quota sampling from 241,424 volunteers (ClinicalTrials.gov NCT04334954). Enrolled participants provided medical, geographic, demographic, and socioeconomic information and 9,028 blood samples. The majority (88.7%) of samples were collected between May 10th and July 31st, 2020. Samples were analyzed via ELISA for anti-Spike and anti-RBD antibodies. Estimation of seroprevalence was performed by using a weighted analysis to reflect the US population. We detected an undiagnosed seropositivity rate of 4.6% (95% CI: 2.6 - 6.5%). There was distinct regional variability, with heightened seropositivity in locations of early outbreaks. Subgroup analysis demonstrated that the highest estimated undiagnosed seropositivity within groups was detected in younger participants (ages 18-45, 5.9%), females (5.5%), Black/African American (14.2%), Hispanic (6.1%), and Urban residents (5.3%), and lower undiagnosed seropositivity in those with chronic diseases. During the first wave of infection over the spring/summer of 2020 an estimate of 4.6% of adults had a prior undiagnosed SARS-CoV-2 infection. These data indicate that there were 4.8 (95% CI: 2.8-6.8) undiagnosed cases for every diagnosed case of COVID-19 during this same time period in the United States, and an estimated 16.8 million undiagnosed cases by mid-July 2020.

Integration of Electrospun Membranes into Low-Absorption Thermoplastic Organ-on-Chip.

In recent years, organ-on-chip (OoC) systems have provoked increasing interest among researchers from different disciplines. OoCs enable the recreation of in vivo-like microenvironments and the generation of a wide range of different tissues or organs in a miniaturized way. Most commonly, OoC platforms are based on microfluidic modules made of polydimethylsiloxane (PDMS). While advantageous in terms of biocompatibility, oxygen permeability, and fast prototyping amenability, PDMS features a major limitation as it absorbs small hydrophobic molecules, including many types of test compounds, hormones, and cytokines. Another common feature of OoC systems is the integration of membranes (i) to separate different tissue compartments, (ii) to confine convective perfusion to media channels, and/or (iii) to provide mechanical support for cell monolayers. Typically, porous polymer membranes are microstructured using track-etching (e.g., polyethylene terephthalate; PET) or lithography (e.g., PDMS). Although membranes of different biomechanical properties (rigid PET to elastic PDMS) have been utilized, the membrane structure and material remain mostly artificial and do not resemble in vivo conditions (extracellular matrix). Here, we report a method for the reliable fabrication and integration of electrospun membranes in OoC modules, which are made of laser-structured poly(methyl methacrylate) (PMMA). The choice of PMMA as base material provides optical parameters and biocompatibility similar to PDMS while avoiding the absorption problem. Using electrospinning for the generation of 3D membranes, microenvironments resembling the native extracellular matrix (ECM) can be generated. We tested two different kinds of electrospun membranes and established processes for a tight integration into PMMA modules. Human (microvasculature) endothelial as well as (retinal pigment) epithelial cell layers could be successfully cultured inside the systems for up to 7 days, while being either directly exposed to (endothelial cells) or protected (epithelial cells) from the shear flow. Our novel method enables the versatile fabrication of OoC platforms that can be tailored to the native environment of tissues of interest and at the same time are applicable for the testing of compounds or chemicals without constraints.

Three-Dimensional Bioprinted Hyaluronic Acid Hydrogel Test Beds for Assessing Neural Cell Responses to Competitive Growth Stimuli.

Hyaluronic acid (HA) is an abundant extracellular matrix (ECM) component in soft tissues throughout the body and has found wide adoption in tissue engineering. This study focuses on the optimization of methacrylated HA (MeHA) for three-dimensional (3D) bioprinting to create in vitro test beds that incorporate regeneration-promoting growth factors in neural repair processes. To evaluate MeHA as a potential bioink, rheological studies were performed with PC-12 cells to demonstrate shear thinning properties maintained when printing with and without cells. Next, an extrusion-based Cellink BIO X 3D printer was used to bioprint various MeHA solutions combined with collagen-I to determine which formulation was the most optimal for creating 3D features. Results indicated that MeHA (10 mg/mL) with collagen-I (3 mg/mL) was most suitable. As Schwann cells (SCs) are a critical component of neural repair and regeneration, SC adhesion assessment via integrin ß1 immunostaining indicated that the bioink candidate adequately supported SC adhesion and migration when compared to Col-I, a highly cell-adhesive ECM component. MeHA/collagen-I bioink was adapted for neural specific applications by printing with the neural growth factor (NGF) and glial cell line-derived neurotrophic factor (GDNF). These test beds were conducive for SC infiltration and presented differential migration responses. Finally, a two-chamber in vitro test bed design was created to study competitive biochemical cues. Dorsal root ganglia were seeded in test beds and demonstrated directional neurite extension (measured by ß-III tubulin and GAP43 immunostaining) in response to NGF and GDNF. Overall, the selected MeHA/collagen-I bioink was bioprintable, improved cell viability compared to molded controls, and was conducive for cell adhesion, growth factor sequestration, and neural cell infiltration. MeHA is a suitable bioink candidate for extrusion-based bioprinting and will be useful in future development of spatially complex test beds to advance in vitro models as an alternative to common in vivo tests for neural repair applications.

Infrared imaging systems for wall protection in the W7-X stellarator (invited).

Wendelstein 7-X aims at quasi-steady state operation with up to 10 MW of heating power for 30 min. Power exhaust will be handled predominantly via 10 actively water cooled CFC (carbon-fiber-reinforced carbon) based divertor units designed to withstand power loads of 10 MW/m2 locally in steady state. If local loads exceed this value, a risk of local delamination of the CFC and failure of entire divertor modules arises. Infrared endoscopes to monitor all main plasma facing components are being prepared, and near real time software tools are under development to identify areas of excessive temperature rise, to distinguish them from non-critical events, and to trigger alarms. Tests with different cameras were made in the recent campaign. Long pulse operation enforces additional diagnostic design constraints: for example, the optics need to be thermally decoupled from the endoscope housing. In the upcoming experimental campaign, a graphite scraper element, in front of the island divertor throat, will be tested as a possible means to protect the divertor pumping gap edges during the transient discharge evolution.