Diamond surface functionalization via visible light-driven C-H activation for nanoscale quantum sensing.

Nitrogen-vacancy (NV) centers in diamond are a promising platform for nanoscale NMR sensing. Despite significant progress toward using NV centers to detect and localize nuclear spins down to the single spin level, NV-based spectroscopy of individual, intact, arbitrary target molecules remains elusive. Such sensing requires that target molecules are immobilized within nanometers of NV centers with long spin coherence. The inert nature of diamond typically requires harsh functionalization techniques such as thermal annealing or plasma processing, limiting the scope of functional groups that can be attached to the surface. Solution-phase chemical methods can be readily generalized to install diverse functional groups, but they have not been widely explored for single-crystal diamond surfaces. Moreover, realizing shallow NV centers with long spin coherence times requires highly ordered single-crystal surfaces, and solution-phase functionalization has not yet been shown with such demanding conditions. In this work, we report a versatile strategy to directly functionalize C-H bonds on single-crystal diamond surfaces under ambient conditions using visible light, forming C-F, C-Cl, C-S, and C-N bonds at the surface. This method is compatible with NV centers within 10 nm of the surface with spin coherence times comparable to the state of the art. As a proof-of-principle demonstration, we use shallow ensembles of NV centers to detect nuclear spins from surface-bound functional groups. Our approach to surface functionalization opens the door to deploying NV centers as a tool for chemical sensing and single-molecule spectroscopy.

Selection of spermatozoa with high motility and quality from bovine frozen-thawed semen using the centrifuge-free device.

This study aimed to assess the potential of the centrifuge-free commercial device (MIGLIS®) in selecting functional frozen-thawed bovine sperm by migration-sedimentation, its effect on embryo development, and compare the potential with that of centrifugation-based techniques, including washing and Percoll density gradient centrifugation (DGC). In experiment 1, different dilutions (1.5×, 2×, and 3×) of frozen-thawed spermatozoa were assessed to identify the adequate one for the MIGLIS method. In experiment 2, the recovery rates, quality, and reactive oxygen species (ROS) concentrations of the spermatozoa selected using MIGLIS, washing, and Percoll DGC were compared. In experiment 3, the resultant in vitro fertilised embryos from spermatozoa selected using the three methods were evaluated for blastocyst formation rates and intracellular ROS concentrations at the 2-4 cell stage. The intracellular ROS concentrations were investigated using 2', 7'-dichlorodihydrofluorescein diacetate staining. Using the MIGLIS device, significantly more spermatozoa were recovered at 2× dilution compared with the other dilution ratio, but the motility was not affected by the dilution ratio. On the selection of spermatozoa using the three methods, employing MIGLIS decreased the recovery rates. However, the MIGLIS method increased motility, viability, and acrosome integrity rates compared to those in spermatozoa from the other methods. The ROS concentration of spermatozoa in the MIGLIS method was significantly lower than that in the washing method. Nevertheless, blastocyst formation rates were similar among the three methods, but the ROS concentration of early-stage embryos produced using MIGLIS was significantly lower than those produced using Percoll DGC. In conclusion, the MIGLIS method has the potential to select functional, high-quality frozen-thawed bovine spermatozoa.

Histidine-rich protein II nanoparticle delivery of heme iron load drives endothelial inflammation in cerebral malaria.

Histidine-rich protein II (HRPII) is secreted by Plasmodium falciparum during the blood stage of malaria infection. High plasma levels of HRPII are associated with cerebral malaria, a severe and highly fatal complication of malaria. HRPII has been shown to induce vascular leakage, the hallmark of cerebral malaria, in blood-brain barrier (BBB) and animal models. We have discovered an important mechanism for BBB disruption that is driven by unique features of HRPII. By characterizing serum from infected patients and HRPII produced by P. falciparum parasites in culture, we found that HRPII exists in large multimeric particles of 14 polypeptides that are richly laden with up to 700 hemes per particle. Heme loading of HRPII is required for efficient binding and internalization via caveolin-mediated endocytosis in hCMEC/D3 cerebral microvascular endothelial cells. Upon acidification of endolysosomes, two-thirds of the hemes are released from acid-labile binding sites and metabolized by heme oxygenase 1, generating ferric iron and reactive oxygen species. Subsequent activation of the NLRP3 inflammasome and IL-1ß secretion resulted in endothelial leakage. Inhibition of these pathways with heme sequestration, iron chelation, or anti-inflammatory drugs protected the integrity of the BBB culture model from HRPII:heme. Increased cerebral vascular permeability was seen after injection of young mice with heme-loaded HRPII (HRPII:heme) but not with heme-depleted HRPII. We propose that during severe malaria infection, HRPII:heme nanoparticles in the bloodstream deliver an overwhelming iron load to endothelial cells to cause vascular inflammation and edema. Disrupting this process is an opportunity for targeted adjunctive therapies to reduce the morbidity and mortality of cerebral malaria.

Chemical Recycling of Thiol Epoxy Thermosets via Light-Driven C-C Bond Cleavage.

Epoxy thermosets are high-volume materials that play a central role in a wide range of engineering applications; however, technologies to recycle these polymers remain rare. Here, we present a catalytic, light-driven method that enables chemical recycling of industrially relevant thiol epoxy thermosets to their original monomer at ambient temperature. This strategy relies on the proton-coupled electron transfer (PCET) activation of hydroxy groups within the polymer network to generate key alkoxy radicals that promote the fragmentation of the polymer through C-C bond ß-scission. The method fully depolymerizes insoluble thiol epoxy thermosets into well-defined mixtures of small-molecule products, which can collectively be converted into the original monomer via a one-step dealkylation process. Notably, this process is selective and efficient even in the presence of other commodity plastics and additives commonly found in commercial applications. These results constitute an important step toward making epoxy thermosets recyclable and more generally exemplify the potential of PCET to offer a more sustainable end-of-life for a diverse array of commercial plastics.

Climate dictates microbial community composition and diversity in Australian biological soil crusts (biocrusts).

The soil surface of drylands can typically be colonized by cyanobacteria and other microbes, forming biological soil crusts or 'biocrusts'. Biocrusts provide critical benefits to ecosystems and are a common component of the largely arid and semi-arid Australian continent. Yet, their distribution and the parameters that shape their microbial composition have not been investigated. We present here the first detailed description of Australia's biocrust microbiome assessed from 15 sites across the continent using 16S rRNA sequencing. The most abundant bacterial phyla from all sites were Cyanobacteria, Proteobacteria, Actinobacteria, Chloroflexi and Bacteroidetes. Cyanobacterial communities from northern regions were more diverse and unclassified cyanobacteria were a noticeable feature of northern biocrusts. Segregation between northern and southern regions was largely due to the differential abundance of Microcoleus spp., with M. paludosus dominating in the north and M. vaginatus dominating in the south. The geographical shifts in bacterial composition and diversity were correlated to seasonal temperatures and summer rainfall. Our findings provide an initial reference for sampling strategies to maximize access to bacterial genetic diversity. As hubs for essential ecosystem services, further investigation into biocrusts in arid and semi-arid regions may yield discoveries of genetic mechanisms that combat increases in warming due to climate change.

Asymmetric wall ingrowth deposition in Arabidopsis phloem parenchyma transfer cells is tightly associated with sieve elements.

In Arabidopsis, polarized deposition of wall ingrowths in phloem parenchyma (PP) transfer cells (TCs) occurs adjacent to cells of the sieve element/companion cell (SE/CC) complex. However, the spatial relationships between these different cell types in minor veins, where phloem loading occurs, are poorly understood. PP TC development and wall ingrowth localization were compared with those of other phloem cells in leaves of Col-0 and the transgenic lines AtSUC2::AtSTP9-GFP (green fluorescent protein) and AtSWEET11::AtSWEET11-GFP that identify CCs and PP cells, respectively. The development of PP TCs in minor veins, indicated by deposition of wall ingrowths, proceeded basipetally in leaves. However, not all PP cells develop wall ingrowths, and higher levels of deposition occur in abaxial- compared with adaxial-positioned PP TCs. Furthermore, the deposition of wall ingrowths was exclusively initiated on and preferentially covered the PP TC/SE interface, rather than the PP TC/CC interface, and only occurred in PP cells that were adjacent to SEs. Collectively, these results demonstrate a tight association between SEs and wall ingrowth deposition in PP TCs and suggest the existence of two subtypes of PP cells in leaf minor veins. Compared with PP cells, PP TCs showed more abundant accumulation of AtSWEET11-GFP, indicating functional differences in phloem loading between PP and PP TCs.

Bacterial community structure and metabolic potential in microbialite-forming mats from South Australian saline lakes.

Microbialites are sedimentary rocks created in association with benthic microorganisms. While they harbour complex microbial communities, Cyanobacteria perform critical roles in sediment stabilisation and accretion. Microbialites have been described from permanent and ephemeral saline lakes in South Australia; however, the microbial communities that generate and inhabit these biogeological structures have not been studied in detail. To address this knowledge gap, we investigated the composition, diversity and metabolic potential of bacterial communities from different microbialite-forming mats and surrounding sediments in five South Australian saline coastal lakes using 16S rRNA gene sequencing and predictive metagenome analyses. While Proteobacteria and Bacteroidetes were the dominant phyla recovered from the mats and sediments, Cyanobacteria were significantly more abundant in the mat samples. Interestingly, at lower taxonomic levels, the mat communities were vastly different across the five lakes. Comparative analysis of putative mat and sediment metagenomes via PICRUSt2 revealed important metabolic pathways driving the process of carbonate precipitation, including cyanobacterial oxygenic photosynthesis, ureolysis and nitrogen fixation. These pathways were highly conserved across the five examined lakes, although they appeared to be performed by distinct groups of bacterial taxa found in each lake. Stress response, quorum sensing and circadian clock were other important pathways predicted by the in silico metagenome analysis. The enrichment of CRISPR/Cas and phage shock associated genes in these cyanobacteria-rich communities suggests that they may be under selective pressure from viral infection. Together, these results highlight that a very stable ecosystem function is maintained by distinctly different communities in microbialite-forming mats in the five South Australian lakes and reinforce the concept that 'who' is in the community is not as critical as their net metabolic capacity.

The Distribution of Dengue Virus Serotype in Quang Nam Province (Vietnam) during the Outbreak in 2018.

Objectives: Quang Nam province in the Centre of Vietnam has faced an outbreak of dengue hemorrhagic fever (DHF) in 2018. Although DHF is a recurrent disease in this area, no epidemiological and microbiological reports on dengue virus serotypes have been conducted mainly due to lack of facilities for such a kind of advanced surveillance. The aim of this study was to detect different dengue virus serotypes in patients' blood samples. Design and Methods: Suspected cases living in Quang Nam province (Vietnam) and presenting clinical and hematological signs of dengue hemorrhagic fever were included in the study. The screening was performed, and the results were compared by using two methodologies: RT real-time PCR (RT-rPCR) and the Dengue NS1 rapid test. Results: From December 2018 to February 2019, looking both at RT-rPCR [+] and NS1 [+] methodologies, a total of 488 patients were screened and 336 were positive for dengue virus detection (74 children and 262 adults); 273 of these patients (81.3%) underwent viral serotype identification as follows: 12.82% (35/273) D1 serotype, 17.95% (49/273) D2, 0.37% (1/273) D3, 68.50 (187/283) D4, and 0.37% (1/273) D2+D4 serotypes. The RT-rPCR outcomes showed higher sensitivity during the first three days of infection compared to NS1 (92.3% vs. 89.7%). The NS1 increased sensitivity after the first 3 days whilst the RT-rPCR decreased. Conclusions: Advanced surveillance with dengue virus serotypes identification, if performed routinely, may help to predict and prevent further DHF epidemics based on the exposure of the different serotypes during different periods that lead to the intensification of disease severity as a consequence of antibody-dependent enhancement (ADE).

Photochemical and Electrochemical Applications of Proton-Coupled Electron Transfer in Organic Synthesis.

We present here a review of the photochemical and electrochemical applications of multi-site proton-coupled electron transfer (MS-PCET) in organic synthesis. MS-PCETs are redox mechanisms in which both an electron and a proton are exchanged together, often in a concerted elementary step. As such, MS-PCET can function as a non-classical mechanism for homolytic bond activation, providing opportunities to generate synthetically useful free radical intermediates directly from a wide variety of common organic functional groups. We present an introduction to MS-PCET and a practitioner's guide to reaction design, with an emphasis on the unique energetic and selectivity features that are characteristic of this reaction class. We then present chapters on oxidative N-H, O-H, S-H, and C-H bond homolysis methods, for the generation of the corresponding neutral radical species. Then, chapters for reductive PCET activations involving carbonyl, imine, other X═Y π-systems, and heteroarenes, where neutral ketyl, α-amino, and heteroarene-derived radicals can be generated. Finally, we present chapters on the applications of MS-PCET in asymmetric catalysis and in materials and device applications. Within each chapter, we subdivide by the functional group undergoing homolysis, and thereafter by the type of transformation being promoted. Methods published prior to the end of December 2020 are presented.

Depolymerization of Hydroxylated Polymers via Light-Driven C-C Bond Cleavage.

The accumulation of persistent plastic waste in the environment is widely recognized as an ecological crisis. New chemical technologies are necessary both to recycle existing plastic waste streams into high-value chemical feedstocks and to develop next-generation materials that are degradable by design. Here, we report a catalytic methodology for the depolymerization of a commercial phenoxy resin and high molecular weight hydroxylated polyolefin derivatives upon visible light irradiation near ambient temperature. Proton-coupled electron transfer (PCET) activation of hydroxyl groups periodically spaced along the polymer backbone furnishes reactive alkoxy radicals that promote chain fragmentation through C-C bond ß-scission. The depolymerization produces well-defined and isolable product mixtures that are readily diversified to polycondensation monomers. In addition to controlling depolymerization, the hydroxyl group modulates the thermomechanical properties of these polyolefin derivatives, yielding materials with diverse properties. These results demonstrate a new approach to polymer recycling based on light-driven C-C bond cleavage that has the potential to establish new links within a circular polymer economy and influence the development of new degradable-by-design polyolefin materials.

Perspectives from the Society for Pediatric Research: advice on sustaining science and mentoring during COVID-19.

The COVID-19 pandemic will leave an indelible mark on the careers of current medical trainees. Given the disruptions to medical education, economic impact on institutions, and the uncertainties around future job prospects, trainees are facing unprecedented challenges. This situation is especially concerning for futures of pediatric physician-scientist trainees, where concerns regarding maintaining the pipeline were well documented prior to the emergence of COVID-19. In this Perspectives article, we leverage the unique expertise of our workgroup to address concerns of physician-scientist trainees and to provide suggestions on how to navigate career trajectories in the post-COVID-19 era. We identified and addressed four major areas of concern: lack of in-person conferences and the associated decrease access to mentors and networking activities, decreased academic productivity, diminished job prospects, and mental health challenges. We also suggest actions for trainees, mentors and educational leaders, and institutions to help support trainees during the pandemic, with a goal of maintaining the pediatric physician-scientist pipeline.

Sucrose regulates wall ingrowth deposition in phloem parenchyma transfer cells in Arabidopsis via affecting phloem loading activity.

In Arabidopsis thaliana, phloem parenchyma transfer cells (PPTCs) occur in leaf minor veins and play a pivotal role in phloem loading. Wall ingrowth formation in PPTCs is induced by the phloem loading activity of these cells, which is regulated by sucrose (Suc). The effects of endogenous versus exogenous Suc on wall ingrowth deposition, however, differ. Elevating endogenous Suc levels by increased light enhanced wall ingrowth formation, whereas lowering endogenous Suc levels by dark treatment or genetically in ch-1 resulted in lower levels of deposition. In contrast, exogenously applied Suc, or Suc derived from other organs, repressed wall ingrowth deposition. Analysis of pAtSUC2::GFP plants, used as a marker for phloem loading status, suggested that wall ingrowth formation is correlated with phloem loading activity. Gene expression analysis revealed that exogenous Suc down-regulated expression of AtSWEET11 and 12, whereas endogenous Suc up-regulated AtSWEET11 expression. Analysis of a TREHALOSE 6-PHOSPHATE (T6P) SYNTHASE overexpression line and the hexokinase (HXK)-null mutant, gin2-1, suggested that Suc signalling of wall ingrowth formation is independent of T6P and HXK. Collectively, these results are consistent with the conclusion that Suc regulates wall ingrowth formation via affecting Suc exporting activity in PPTCs.

PCET-Enabled Olefin Hydroamidation Reactions with N-Alkyl Amides.

Olefin aminations are important synthetic technologies for the construction of aliphatic C-N bonds. Here we report a catalytic protocol for olefin hydroamidation that proceeds through transient amidyl radical intermediates that are formed via proton-coupled electron transfer (PCET) activation of the strong N-H bonds in N-alkyl amides by an excited-state iridium photocatalyst and a dialkyl phosphate base. This method exhibits a broad substrate scope, high functional group tolerance, and amenability to use in cascade polycyclization reactions. The feasibility of this PCET protocol in enabling the intermolecular anti-Markovnikov hydroamidation reactions of unactivated olefins is also demonstrated.

Iodine binding with thiophene and furan based dyes for DSCs.

Iodine binding to thiophene rings in dyes for dye-sensitized solar cells (DSCs) has been hypothesized to be performance degrading in a number of literature cases. Binding of iodine to dyes near the semiconductor surface can promote undesirable electron transfers and lower the overall efficiency of devices. Six thiophene or furan containing dye analogs were synthesized to analyze iodine binding to the dyes via Raman spectroscopy, UV-Vis studies, device performance metrics and density functional theory (DFT) based computations. Evidence suggests I2 binds thiophene-based dyes stronger than furan-based dyes. This leads to higher DSC device currents and voltages from furan analogues, and longer electron lifetimes in DSC devices using furan based dyes. Raman spectrum of the TiO2 surface-bound dyes reveals additional and more instense peaks for thiophene dyes in the presence of I2 relative to no I2. Additionally, broader and shifted UV-Vis peaks are observed for thiophene dyes in the presence of I2 on TiO2 films suggesting significant interaction between the dye molecules and I2. These observations are also supported by DFT and TD-DFT calculations which indicate the absence of a key geometric energy minimum in the dye-I2 ground state for furan dyes which are readily observed for the thiophene based analogues.

Transcript Profiling Identifies NAC-Domain Genes Involved in Regulating Wall Ingrowth Deposition in Phloem Parenchyma Transfer Cells of Arabidopsis thaliana.

Transfer cells (TCs) play important roles in facilitating enhanced rates of nutrient transport at key apoplasmic/symplasmic junctions along the nutrient acquisition and transport pathways in plants. TCs achieve this capacity by developing elaborate wall ingrowth networks which serve to increase plasma membrane surface area thus increasing the cell's surface area-to-volume ratio to achieve increased flux of nutrients across the plasma membrane. Phloem parenchyma (PP) cells of Arabidopsis leaf veins trans-differentiate to become PP TCs which likely function in a two-step phloem loading mechanism by facilitating unloading of photoassimilates into the apoplasm for subsequent energy-dependent uptake into the sieve element/companion cell (SE/CC) complex. We are using PP TCs in Arabidopsis as a genetic model to identify transcription factors involved in coordinating deposition of the wall ingrowth network. Confocal imaging of pseudo-Schiff propidium iodide-stained tissue revealed different profiles of temporal development of wall ingrowth deposition across maturing cotyledons and juvenile leaves, and a basipetal gradient of deposition across mature adult leaves. RNA-Seq analysis was undertaken to identify differentially expressed genes common to these three different profiles of wall ingrowth deposition. This analysis identified 68 transcription factors up-regulated two-fold or more in at least two of the three experimental comparisons, with six of these transcription factors belonging to Clade III of the NAC-domain family. Phenotypic analysis of these NAC genes using insertional mutants revealed significant reductions in levels of wall ingrowth deposition, particularly in a double mutant of NAC056 and NAC018, as well as compromised sucrose-dependent root growth, indicating impaired capacity for phloem loading. Collectively, these results support the proposition that Clade III members of the NAC-domain family in Arabidopsis play important roles in regulating wall ingrowth deposition in PP TCs.

Wall ingrowth deposition in phloem parenchyma transfer cells in Arabidopsis: Heteroblastic variations and a potential role in pathogen defence.

Transfer cell (TCs) develop unique wall ingrowth networks which amplify plasma membrane surface area and thus maximize nutrient transporter density at key anatomic sites for nutrient exchange within plants and their external environment. These sites fall into 4 main groups corresponding to 4 categories of trans-membrane flux: absorption/secretion of solutes from or to the external environment, and absorption/secretion of solutes from or to internal, extra-cytoplasmic compartments. Research on TC biology over recent decades has demonstrated correlations between wall ingrowth deposition in TCs and enhanced transport capacity in many major agricultural species such as pea, fava bean, cotton and maize. Consequently, there is general consensus that the existence of wall ingrowth morphology implies an augmentation in membrane transport capacity. However, this may not be entirely applicable for phloem parenchyma (PP) TCs in Arabidopsis. Our recent survey of PP TC abundance and distribution in Arabidopsis veins indicated that PP TC development reflects heteroblastic status. A consequence of this observation is the suggestion that PP TCs, or at least wall ingrowth deposition in these cells, potentially act as a physical barrier to defend access of invading pathogens to sugar-rich sieve elements rather than solely in facilitating the export of photoassimilate from collection phloem in leaves.

Near-Infrared Fluorescent Thienothiadiazole Dyes with Large Stokes Shifts and High Photostability.

A series of near-infrared (NIR) organic emissive materials were synthesized and the photophysical properties analyzed. The donor-acceptor-donor materials were designed with thienopyrazine and thienothiadiazole acceptor groups with thiophene-, furan-, and triphenylamine-based donor groups. The absorption and emission spectra were found to be widely tunable on the basis of the donor and acceptor groups selected. Computational analysis confirms these materials undergo an intramolecular charge-transfer event upon photoexcitation. Large Stokes shifts of ∼150 nm were observed and rationalized by computational analysis of geometry changes in the excited state. Fluorescence studies on the dye series reveal maximum peak emission wavelengths near 900 nm and a quantum yield exceeding 16% for 4,6-bis(2-thienyl)thieno[3,4-c][1,2,5]thiadiazole. Additionally, several dyes were found to have reasonable quantum yields within this NIR region (>1%), with emission wavelengths reaching 1000 nm at the emission curve onset. Photostability studies were conducted on these materials in an ambient oxygen environment, revealing excellent stability in the presence of oxygen from all the dyes studied relative to a benchmark cyanine dye (ICG) during photoexcitation with exceptional photostability from the 4,6-bis(5'-dodecyl-[2,2'-bithiophene]-5-yl)thieno[3,4-c][1,2,5]thiadiazole derivative.

Heteroblastic Development of Transfer Cells Is Controlled by the microRNA miR156/SPL Module.

We report that wall ingrowth deposition in phloem parenchyma (PP) transfer cells (TCs) in leaf veins of Arabidopsis (Arabidopsis thaliana) represents a novel trait of heteroblasty. Development of PP TCs involves extensive deposition of wall ingrowths adjacent to cells of the sieve element/companion cell complex. These PP TCs potentially facilitate phloem loading by enhancing efflux of symplasmic Suc for subsequent active uptake into cells of the sieve element/companion cell complex. PP TCs with extensive wall ingrowths are ubiquitous in mature cotyledons and juvenile leaves, but dramatically less so in mature adult leaves, an observation consistent with PP TC development reflecting vegetative phase change (VPC) in Arabidopsis. Consistent with this conclusion, the abundance of PP TCs with extensive wall ingrowths varied across rosette development in three ecotypes displaying differing durations of juvenile phase, and extensive deposition of wall ingrowths was observed in rejuvenated leaves following prolonged defoliation. PP TC development across juvenile, transition, and adult leaves correlated positively with levels of miR156, a major regulator of VPC in plants, and corresponding changes in wall ingrowth deposition were observed when miR156 was overexpressed or its activity suppressed by target mimicry. Analysis of plants carrying miR156-resistant forms of SQUAMOSA PROMOTER BINDING PROTEIN LIKE (SPL) genes showed that wall ingrowth deposition was increased in SPL9-group but not SPL3-group genes, indicating that SPL9-group genes may function as negative regulators of wall ingrowth deposition in PP TCs. Collectively, our results point to wall ingrowth deposition in PP TCs being under control of the genetic program regulating VPC.