Environmentally Friendly Plastic Boats - A Facile Strategy for Cleaning Oil Spills on Water with Excellent Efficiency.

In this report, we demonstrate a novel plastic boat capable of selectively and efficiently collecting spilled oils while floating on water. The boat has macroscopic openings in its vertical and curved sidewalls. It is easily, quickly, and inexpensively fabricated using an environmentally friendly polymer via a three-dimensional printing technique. Its surface is sequentially coated with nano-ceramic coating liquid and oil, which imparts favorable hydrophobic, oleophilic, and high oil-wettability properties. Using the boat prototype, a small pump system, and an oil boom-like device, we demonstrate that spilled oils with a wide range of viscosities (2.0-1000 cSt at 25-40 °C) are rapidly collected from the surface of both pure water and seawater. Remarkably, it efficiently collects oil spills on seawater under wavy conditions, and the retrieved oil does not mix with any drop of water. Moreover, the boat can be scaled up to a large size easily and has a long-term usage. By exhibiting these characteristics, our developed boat is a prominent potential device for practical oil retrieval applications.

Influences of Material Selection, Infill Ratio, and Layer Height in the 3D Printing Cavity Process on the Surface Roughness of Printed Patterns and Casted Products in Investment Casting.

As 3D-printed (3DP) patterns are solid and durable, they can be used to create thin wall castings, which is complicated with wax patterns because of the wax's fragility and high shrinkage ratio. According to this study's experiment results, polylactic acid (PLA), polyvinyl butyral (PVB), and castable wax (CW) are suitable materials for preparing investment casting (IC) cavities. The results indicate that the casting product with the highest-quality surface is obtained using a cavity prepared using a CW-printed pattern. PLA- and PVB-printed patterns provide a good surface finish for casted products. In addition, the roughness of both the printed and casted surfaces increases as the printing layer height increases. The roughness of the casted surface varies from 2.25 µm to 29.17 µm. This investigation also considers the correlation between the infill ratio and mechanical properties of PLA-printed patterns. An increase in the infill ratios from 0% to 100% leads to a significant increase in the tensile properties of the PLA-printed pattern. The obtained results can be practically used.

Recombinase-free cloning (RFC) protocol for gene swapping.

Recombinant DNA technology has been playing the key role for a long time since its first beginning. DNA ligases have certainly contributed to the development of cloning techniques, as well as molecular study up to now. Despite being a prime cloning tool, DNA ligases still face some shortcomings which lead to their limit of use. Our study provided an improved method that simplified the basic restriction enzyme-based cloning (REC) by eliminating the ligation role, named recombinase-free cloning (RFC). This improved technique was designed with only one PCR reaction, one digestion reaction, and one temperature profile, which takes advantage of endogenous recombinase in E. coli host to create the target recombinant vector inside the cell. All purification steps were eliminated for effectively material- and time-saving. Five different clones were generated by RFC. This method showed relatively low efficiency yet successful at a range of 100% in every conducted trial with fragment sizes from 0.5-1.0 kbp. The RFC method could be completed within a day (about 9 hours), without the need of ligase or recombinase or purification steps, which significantly saved DNA components, materials as well as the time required. In conclusion, we expected to provide a more convenient cloning method, as well as enable faster generation of DNA clones, which would be well applied in the less equipped laboratories.

Prokaryotic expression of chimeric GFP-hFc protein as a potential immune-based tool.

GFP is an old-yet-powerful protein marker, which has been widely used in molecular biotechnology due to its capacity of exhibiting bright green fluorescence when exposed to ultraviolet light. The hFc region of IgG antibodies is a specific binding ligand of expressed receptors on immune cells with well-known cellular-associated functions like opsonization and phagocytosis. In this present study, we proceeded to fuse gfp-hfc gene into pET-28a to create a recombinant pET-28a-gfp-hfc vector. The expression of GPF-hFc was induced by IPTG and confirmed using SDS-PAGE and followed by Western blot probed with 6xHis antibodies. This chimeric protein was utilized in specific binding experiments with protein A/G-coated magnetic beads using a fluorescence microscope. Due to its fluorescence and binding ability, GFP-hFc could be used as a model molecule for monitoring molecule detection studies, tracking nanoparticle migration and distribution, or stimulating immune responses.

Recombinant Human SCARB2 Expressed in Escherichia coli and its Potential in Enterovirus 71 Blockage.

Hand, foot and mouth disease is a common viral infectious disease caused by enteroviruses, including coxsackie A16 (CVA16) and enterovirus 71 (EV71). HFMD can cause severe symptoms in children which can be fatal. Human scavenger receptor class B member 2 (SCARB2) is a cellular receptor for EV71 and CVA16, providing a potential approach for preventing EV71 infection and transmission. In this present study, we constructed and assessed the potential of recombinant SCARB2, using E. coli expression system. To generate this construct, scarb2 gene was cloned into pET22b vector and expressed in E. coli BL21 (DE3). The expression of SCARB2 was induced by 0.1 mM IPTG and analyzed using SDS-PAGE, followed by Western blot. Expressed SCARB2 was in inclusion bodies and refolded to obtain the soluble form with recovery efficacy of 100%. This recombinant protein was then validated for binding with EV71 via indirect ELISA in two different pHs (7.4 and 5.5), which partially revealed the mechanism of virus-receptor interaction. These results envisaged potential applications for utilizing recombinant SCARB2 in preventing the virus transmission.

Development of the High Sensitivity and Selectivity Method for the Determination of Histamine in Fish and Fish Sauce from Vietnam by UPLC-MS/MS.

A selective, sensitive, and rapid method by using ultraperformance liquid chromatography-tandem mass spectrometry (UPLC-MS/MS) for the determination of histamine in fish and fish sauce was developed. The optimal conditions of liquid chromatographic separation and mass spectroscopy of histamine have also been investigated. The linear ranges of the method were 20.0 ÷ 1000 ng/mL, and the corresponding correlation coefficient was 0.9993. Mean recoveries of the analyte at three spike levels (low, medium, and high) were within the range of 98.5% ÷ 102.5% (n = 7). The limit of detection (LOD) and limit of quantification (LOQ) values were 3.83 and 11.50 ng/mL for the fish sauce sample and 4.71 and 14.12 ng/mL for the fish sample, respectively. The influence of the matrix effect on the accuracy, repeatability, and recovery of the method was negligible. The recommended method was applied to determine the content of this substance in 21 fish sauce samples and 4 kinds of fish samples, which were collected from Ho Chi Minh City, Vietnam, in 2019.

Analysis of drug-resistant strains of Mycobacterium leprae in an endemic area of Vietnam.

BACKGROUND: Multidrug therapy has effectively reduced the number of leprosy cases in the world. However, the rate of reduction has decelerated over the years, giving early detection of Mycobacterium leprae and epidemiological study of relapse renewed relevance in attempts to eliminate the disease. METHODS: A molecular epidemiological survey for drug-resistant M. leprae was conducted in the central and highland regions of Vietnam. A total of 423 samples taken from patients, including 83 patients with new cases, 321 patients receiving treatment, and 19 patients with relapse, were studied for detection of M. leprae with mutations relating to drug resistance by sequencing the drug resistance determining region of the folP1, rpoB, and gyrA genes, which are responsible for dapsone, rifampicin, and ofloxacin resistance, respectively. RESULTS: Nineteen mutations were found in the folP1 gene samples, and no mutations relating to drug resistance were found in either the rpoB or gyrA genes. Samples from patients with relapse showed folP1 mutation rates as high as 57%, and the mutation rates in samples from new and recent cases were <10%. Patients with relapse who had histories of treatment with dapsone monotherapy showed high mutation rates (78%), compared with patients with relapse who had previously only received multidrug therapy (33%). CONCLUSIONS: Our study indicated high rates of dapsone resistance in patients with relapse, compared with patients with new and recent cases of leprosy. Moreover, it was observed that many of the patients with relapse who had dapsone-resistant mutations had histories of treatment with dapsone monotherapy.

Evidence of early retinal microvascular changes in patients with type 2 diabetes and depression.

OBJECTIVE: To examine retinal vascular caliber, an indicator of early microvascular disease and depression in patients with Type 2 diabetes. METHODS: We conducted a clinic-based study, comparing participants with Type 2 diabetes with major depression (n = 43), without depression (n = 49), and healthy controls without diabetes or depression (n = 54). Retinal vascular caliber was measured from digital photographs. Depression status was determined, using standardized clinical assessment. RESULTS: After adjusting for age and gender, participants with diabetes and depression had larger arteriolar and venular calibers (147.7 microm for arteriolar and 215.7 microm for venular calibers) than participants with diabetes but without depression (143.3 microm and 213.9 microm) and healthy controls (135.8 microm and 202.5 microm, p for trend = .002 for arteriolar and p = .02 for venular caliber). In multivariate models adjusting for duration of diabetes, systolic blood pressure, cigarette smoking, serum glucose, Cerebrovascular Risk Factor Scale, Cumulative Illness Rating Scale, and retinopathy levels, this relationship remained significant for retinal arterioles (p = .02) but not for retinal venules (p = .10). CONCLUSIONS: These data show that patients with Type 2 diabetes with major depression have wider retinal arterioles, supporting the concept that depression is associated with early microvascular changes in Type 2 diabetes.

Are retinal microvascular caliber changes associated with severity of coronary artery disease in symptomatic cardiac patients?

OBJECTIVES: Recent population-based studies have shown that retinal vascular caliber may predict the risk of clinical coronary artery disease (CAD) events. Whether this association is related to macro- or microvascular mechanisms remains unknown. We investigated the relationship of retinal vascular caliber with severity and extent of CAD in symptomatic cardiac patients. MATERIALS AND METHODS: Overall, 98 patients attending diagnostic coronary angiography were recruited. Coronary angiography was used to assess for the severity and extent of CAD. Digital retinal photography was performed immediately prior to cardiac catheterization, and retinal vascular caliber was measured from these photographs by using a computer program and summarized as central retinal arteriolar (CRAE) and venular (CRVE) equivalents. RESULTS: Retinal arteriolar and venular calibers were not associated with increasing severity of CAD, as assessed by Leaman scores (CRAE/CRVE: P for trend=0.17/0.57), presence of clinically significant CAD (CRAE/CRVE: P=0.35/0.32), or number of diseased vessels (CRAE/CRVE: P for trend=0.18/0.69). CONCLUSIONS: Retinal vascular caliber changes are not associated with the severity of obstructive CAD in symptomatic patients. These data suggest that the association of retinal vascular caliber with clinical CAD seen in epidemiological studies may not be applicable to clinical symptomatic patients and may be related to microvascular, rather than macrovascular, mechanisms.

Relationship of retinal vascular caliber with diabetes and retinopathy: the Multi-Ethnic Study of Atherosclerosis (MESA).

OBJECTIVE: To examine the relationship of retinal vascular caliber with diabetes, glycemia, and diabetic retinopathy. RESEARCH DESIGN AND METHODS: Population-based study using data from the Multi-Ethnic Study of Atherosclerosis (MESA), comprising 5,976 individuals (whites, blacks, Hispanics, and Chinese) residing in six U.S. communities who were free of clinical cardiovascular disease at baseline. Retinal vascular caliber was measured from digital retinal photographs. RESULTS: There were 4,585 individuals with normal fasting glucose (NFG), 499 with impaired fasting glucose (IFG), 165 with diabetes with retinopathy signs, and 727 with diabetes without retinopathy signs. After multivariate analysis, retinal arteriolar caliber increased from 143.8 microm in subjects with NFG to 144.5 microm in IFG and 146.1 microm in diabetes (P < 0.001 for trend). Retinal venular caliber increased from 214.4 microm in NFG to 216.7 microm in IFG and 218.0 microm in diabetes (P < 0.001 for trend). Retinal venular caliber was significantly larger with increasing levels of fasting glucose and A1C. In a subgroup analysis by ethnicity, the association between wider arteriolar caliber and diabetes was evident in whites only, whereas wider venular caliber and diabetes was evident in Hispanics and Chinese only. In people with diabetes, eyes with retinopathy had larger retinal venular but not arteriolar caliber. CONCLUSIONS: Retinal arteriolar and venular calibers are larger in individuals with diabetes, but the pattern of associations appears to vary by ethnicity. Retinal venular caliber is additionally associated with retinopathy signs. These findings add further to the concept that variations in retinal vascular caliber may reflect early diabetic microvascular damage.

Is depression associated with microvascular disease in patients with type 2 diabetes?

We hypothesize that late-life depression is a manifestation of microvascular disease in patients with type 2 diabetes. We conducted a clinic-based cross-sectional study, comparing retinal vascular caliber, a marker of microvascular disease, in participants with type 2 diabetes with major depression (n=34), without depression (n=27) and healthy non-diabetic controls (n=38). Retinal vascular caliber was measured from digital retinal photographs using a validated computer-assisted method. After adjusting for age and gender, there was a trend of increasing retinal arteriolar caliber from healthy controls (132.6 microm), to diabetic patients without depression (139.2 microm), and diabetic patients with major depression (145.3 microm, P=0.008). The trend in retinal arteriolar caliber remains significant after adjusting for duration of diabetes, but not after further adjusting for vascular risk factors. Our findings suggest that there is variation in the retinal vascular caliber between type 2 diabetic patients with and without major depression and non-diabetic controls. This variation was largely related to poorer diabetes control and a higher frequency of vascular risk factors in diabetic patients, particularly those with depression. Studies with larger sample size may provide further insights into this association.