Evidence of internal structure of the transactional eHealth literacy among Vietnamese youth: An instrument validation study.

Background: The progression into the Digital Age has brought an array of novel skill requirements. Unlike traditional literacy, there are currently few measures that can reliably measure eHealth literacy. The Transactional Model of eHealth Literacy and subsequent Transactional eHealth Literacy Instrument may provide a feasible option for measuring eHealth literacy. Objective: This instrument has yet to be validated, which is the aim of this study. In particular, this article was conducted to validate the TeHLI to see which components of the tool (how many and which components included) would be the best fit statistically and whether the tool applies to groups of different characteristics. Methods: We conducted an online cross-sectional study among 236 Vietnamese young people. A exploratory factor analysis was used to identify the best fit model of the Transactional eHealth Literacy Instrument. A confirmatory factor analysis tested measurement invariance at four levels: configural, metric, scalar, and strict invariance. Only metric invariance was partially invariant, while the rest tested fully invariant. Even with partial metric invariance, there is reason to assume that functional, communicative, critical, and translational eHealth literacy (the four levels according to the transactional model) are consistently measured when deploying the Transactional eHealth Literacy Instrument across groups. Results: The study findings substantiate that the most optimal composition of the TeHLI consists of four factors: functional, communicative, critical, and translational eHealth literacy, with RMSEA = 0.116; CFI = 0.907, and the highest internal consistency (Cronbach's α = 0.91, 0.92, 0.88, and 0.92 for each factor respectively). After using measurement invariance, that gender, education, marital status, age, location, and household economy do not influence the way participants to respond to the TeHLI to the point that would introduce measurement bias. In other word, using TeHLI across population groups should not produce error margins that substantially differ from each other. Conclusions: This study suggests the instrument can be used for comparisons across groups and has the potential to generate high-quality data usable for informing change agents as to whether a particular population is proficient enough to adopt novel eHealth innovations.

Adaptation and Validation of Active Aging Index Among Older Vietnamese Adults.

Objective: The objective of this study was to adapt and validate the Vietnamese version of Active Aging Index (AAI). Method: We conducted an expert panel, focus groups, test-retest and examination of internal consistency, and construct and concurrent validity among 804 older Vietnamese adults. Results: Scale content validity index (CVI) was 0.98. Test-retest coefficients ranged from 0.70 to 1.00. The Cronbach's alphas of well-being, voluntary, affordability, and politics were 0.94, 0.70, 0.65, and 0.16, respectively. Voluntary and well-being had good construct validity. Regarding politics, only one of four items had good test-retest reliability (Kappa 0.84), while other three had low variance in both test-retest and field study. In exploratory factor analysis, items assessing affordability loaded on three components. AAI was positively associated with perceived health, life satisfaction, and quality of life; it was negatively associated with falls, loneliness, and frailty. Discussion: In adapting AAI, researchers should consider cultural sensitivity. Key modifications, findings, explanations, and suggestions are presented here.

Development of an IgY-based lateral flow immunoassay for detection of fumonisin B in maize.

Fumonisin is one of the most prevalent mycotoxins in maize, causing substantial economic losses and potential health risks in human and animals. In the present study, in-house polyclonal IgY antibody against fumonisin group B (FB) was applied for the development of a competitive lateral flow immunoassay detecting these mycotoxins in maize grains with the limit of detection of 4000 µg/kg, which corresponds to the maximum residue limit adopted by The International Codex Alimentarius Commission. To this end, factors affecting the test performance including nitrocellulose membrane type, dilution factor of maize homogenates in running buffer, amount of detection conjugate, and incubation time between detection conjugate and samples were optimized. Under the optimal condition (UniSart ®CN140 nitrocellulose membrane, FB 1-BSA immobilized at 1 µg/cm, 1:10 dilution factor, 436 ng of gold nanoparticle conjugate, 30 minutes of incubation), the developed test could detect both FB 1 and FB 2 in maize with limit of detection of 4000 µg/kg, and showed no cross-reactivity to deoxynivalenol, ochratoxin A, aflatoxin B1 and zearalenone. When applied to detect FB 1 and FB 2 in naturally contaminated maize samples, results obtained from the developed assay were in good agreement with those from the high-performance liquid chromatography method. This lateral flow immunoassay is particularly suitable for screening of fumonisins in maize because of its simplicity and cost-effectiveness.

Acid etching of glass-infiltrated zirconia and its biological response.

PURPOSE: The purpose of this study was to evaluate the influence of acid etching treatment on surface characteristics and biological response of glass-infiltrated zirconia. MATERIALS AND METHODS: A hundred zirconia specimens were divided into four groups depending on surface treatments: untreated zirconia (group Z); acid-etched zirconia (group ZE); glass-infiltrated zirconia (group ZG); and glass-infiltrated and acid-etched zirconia (group ZGE). Surface roughness, surface topography, surface morphology, and Vickers hardness of specimens were evaluated. For biological response test, MC3T3-E1 cell attachment and proliferation on surface of the specimens were examined. The data were statistically analyzed using one-way ANOVA and Tukey's HSD test at a significance level of 0.05. RESULTS: Group ZGE showed the highest surface roughness (Ra = 1.54 µm) compared with other groups (P < .05). Meanwhile, the hardness of group Z was significantly higher than those of other groups (P < .05). Cell attachment and cell proliferation were significantly higher in group ZGE (P < .05). CONCLUSION: We concluded that effective surface roughness on zirconia could be made by acid etching treatment after glass infiltration. This surface showed significantly enhanced osteoblast cell response.

Evaluation of Sandblasting on Mechanical Properties and Cell Response of Bioactive Glass Infiltrated Zirconia.

This study investigated the mechanical properties and initial cell response of bioactive glass infiltrated zirconia before and after sandblasting. One hundred zirconia specimens were divided into the following four groups: untreated zirconia (ZR), sandblasted zirconia (ZS), glass infiltrated zirconia (ZG), and sandblasted glass infiltrated zirconia (ZGS). Surface roughness, biaxial flexural strength, hardness and osteoblast cells proliferation were evaluated. ZGS group showed a slight decrease in hardness. However it has improvement in flexural strength (686.2 MPa). After sandblasting, the ZGS group had the highest surface roughness (R a = 1.24 µm) with enhanced osteoblast cells response. Our results indicated that sandblasting method can improve the mechanical properties of bioactive glass infiltrated zirconia with better osteoblast cell response. This new surface is promising for zirconia dental implant application in the future.