ABSTRACT
This study was done to compare the bioavailability of a new tablet formulation of gemifloxacin (gemifloxacin 320 mg/tablet) with that of the reference product (factive 320 mg/tablet). The bioequivalence of a single dose (320 mg) was assessed for gemifloxacin included in the test and reference products by comparing the pharmacokinetic parameters derived from the plasma concentration-time profiles following administration to 24 healthy male volunteers in a balanced, 2-period, 2-sequence, 2-way crossover design. Plasma concentrations of gemifloxacin were analyzed by a validated and sensitive HPLC assay developed in-house. The mean plasma concentration-time profiles are almost superimposable. 18 ANOVAs were performed to compare gemifloxacin plasma levels of the two formulations at each sampling time and there were no statistical differences between the two formulations. The parameters used to measure bioavailability were AUC0-t, AUC0-infinity and Cmax and they were calculated by a model-independent method. The parametric 90% confidence intervals of the mean values for the test/reference ratio were in each case well within the bioequivalence acceptable boundaries of 80-125% for AUCo-t, AUC0-infinity and Cmax. Data obtained in this study prove, by appropriate statistical methods, the essential similarity of plasma levels of gemifloxacin from the test product with those from the reference product suggesting equal clinical efficacy of these two products.
Subject(s)
Drugs, Generic/pharmacokinetics , Fluoroquinolones/pharmacokinetics , Naphthyridines/pharmacokinetics , Adult , Analysis of Variance , Anti-Bacterial Agents/blood , Anti-Bacterial Agents/pharmacokinetics , Area Under Curve , Chromatography, High Pressure Liquid , Ciprofloxacin/blood , Ciprofloxacin/pharmacokinetics , Ciprofloxacin/standards , Cross-Over Studies , Fluoroquinolones/blood , Gemifloxacin , Half-Life , Humans , Male , Naphthyridines/blood , Reference Standards , Tablets , Therapeutic EquivalencyABSTRACT
This investigation was carried out to evaluate the bioavailability of a new suspension formulation of cefixime (100 mg/5 ml), Winex, relative to the reference product, Suprax (100 mg/5 ml) suspension. The bio-availability study was carried out in 24 healthy male volunteers who received a single oral dose (200 mg) of the test (A) and the reference (B) products on 2 treatment days after an overnight fast of at least 10 hours. The treatment periods were separated by a one-week washout period. A randomized, balanced two-way crossover design was used. After dosing, serial blood samples were collected over a period of 16 hours. Plasma concentrations of cefixime were analyzed using a sensitive high-performance liquid chromatographic assay. The pharmacokinetic parameters for cefixime were determined using standard non-compartmental method. The parameters AUC(0-t), AUC(0-infinity), Cmax, Kel, t1/2 and Cmax/AUC(0-infinity) were analyzed statistically using raw and log-transformed data. The time to maximum concentration (tmax) was analyzed using raw data. The parametric 90% confidence intervals of the mean values of the pnfinity harmacokinetic parameters: AUC(0-t), AUC(0-infinity) Cmax, and Cmax/AUC(0-infinity) were within the range 80 - 125% which is acceptable for bioequivalence (using log-transformed data). The calculated 90% confidence intervals based on the ANOVA analysis for the mean test/reference ratios of AUC(0-t), AUC(0-infinity), Cmax, and Cmax/AUC(0-infinity) were 88.93 - 107.10%, 89.09 - 107.11%, 89.63 - 108.58% and 96.85 - 105.29%, respectively. The test formulation was found bioequivalent to the reference formulation with regard to AUC(0-t), AUC(0-infinity), and Cmax using the Schuirmann's two one-sided t-tests. Therefore, the two formulations were considered to be bioequivalent.
Subject(s)
Anti-Bacterial Agents/pharmacokinetics , Cefixime/pharmacokinetics , Administration, Oral , Adult , Analysis of Variance , Anti-Bacterial Agents/administration & dosage , Area Under Curve , Biological Availability , Cefixime/administration & dosage , Cefixime/blood , Chromatography, High Pressure Liquid , Humans , Male , Suspensions , Therapeutic EquivalencyABSTRACT
This investigation was carried out to evaluate the bioavailability of a new capsule formulation of doxycycline (100 mg), doxycin, relative to the reference product, vibramycin (100 mg) capsules. The bioavailability was carried out in 24 healthy male volunteers who received a single dose (100 mg) of the test (A) and the reference (B) products after an overnight fast of at least 10 hours on 2 treatment days. The treatment periods were separated by a 2-week washout period. A randomized, balanced 2-way cross-over design was used. After dosing, serial blood samples were collected for a period of 48 hours. Plasma concentrations of doxycycline were analyzed by a sensitive and validated high-performance liquid chromatography assay. The pharmacokinetic parameters for doxycycline were determined using standard noncompartmental methods. The parameters AUC(0-t), AUC(0-infinity), Cmax, K(el), t(1/2) and Cmax/AUC(0-infinity) were analyzed statistically using log-transformed data. The time to maximum concentration (tmax) was analyzed using raw data. The parametric 90% confidence intervals of the mean values of the pharmacokinetic parameters: AUC(0-t), AUC(0-infinity), Cmax and Cmax/AUC(0-infinity) were within the range 80-125% which is acceptable for bioequivalence (using log-transformed data). The calculated 90% confidence intervals based on the ANOVA analysis of the mean test/reference ratios of AUC(0-t), AUC(0-infinity), Cmax and Cmax/AUC(0-infinity) were 95.98-109.56%, 92.21 to 107.66%, 93.90-112.56%, and 96.0 to 106.91% respectively. The test formulation was found bioequivalent to the reference formulation with regard to AUC(0-t), AUC(0-infinity), Cmax and Cmax/AUC(0-infinity) by the Schuirmann's two 1-sided t-tests. Therefore, the 2 formulations were considered to be bioequivalent.
Subject(s)
Anti-Bacterial Agents/pharmacokinetics , Doxycycline/analogs & derivatives , Doxycycline/pharmacokinetics , Administration, Oral , Adult , Anti-Bacterial Agents/blood , Area Under Curve , Biological Availability , Capsules , Chromatography, High Pressure Liquid , Cross-Over Studies , Doxycycline/blood , Humans , Male , Therapeutic Equivalency , Time FactorsABSTRACT
A bioequivalence study of two oral formulations of 500 mg cefuroxime axetil was carried out in 24 healthy volunteers following a single dose, standard two-treatment cross-over design at the College of Pharmacy, King Saud University, Riyadh, Saudi Arabia, working jointly with King Khalid University Hospital. The two formulations used were Cefuzime (Julphar, United Arab Emirates) as the test and Zinnat (Glaxo Wellcome, England) as the reference product. Both test and reference tablets were administered to each subject after an overnight fasting on two treatment days separated by a 1-week washout period. After dosing, serial blood samples were collected for a period of 8 h. Plasma harvested from blood was analysed for cefuroxime by a sensitive, reproducible and accurate high pressure liquid chromatography (HPLC) method. Various pharmacokinetic parameters including AUC(0-t), AUC(0-infinity), C(max), T(max), T(1/2) and K(el) were determined from plasma concentrations of both formulations and found to be in good agreement with reported values. AUC(0-t), AUC(0-infinity) and C(max) were tested for bioequivalence after log-transformation of data. No significant difference was found based on an analysis of variance (ANOVA); 90% confidence interval for test/reference ratio of these parameters were found within bioequivalence acceptance range of 80-125%. Based on these statistical inferences, it was concluded that Cefuzime is bioequivalent to Zinnat.
Subject(s)
Cefuroxime/pharmacokinetics , Cephalosporins/pharmacokinetics , Adult , Area Under Curve , Cefuroxime/administration & dosage , Cephalosporins/administration & dosage , Chromatography, High Pressure Liquid , Half-Life , Humans , Male , Middle Aged , Tablets , Therapeutic EquivalencyABSTRACT
This investigation was carried out to evaluate the bioavailability of a new tablet formulation of ranitidine HCl (300 mg), Ranid, relative to the reference product, Zantac, (300 mg) tablets. The bioavailability was carried out on 24 healthy male volunteers who received a single dose (300 mg) of the test (T) and the reference (R) products in the fasting state, in a randomized balanced 2-way crossover design. After dosing, serial blood samples were collected for a period of 16 hours. Plasma harvested from blood was analyzed for ranitidine by a sensitive and validated high-performance liquid chromatographic assay. The maximum plasma concentration (Cmax), area under the plasma concentration time curve up to the last measurable concentration (AUC0-t), and to infinity (AUC0-infinity) and the absorption rate (Cmax/AUC0-infinity) were analyzed statistically under the assumption of a multiplicative model. The time to maximum concentration (Tmax) was analyzed assuming an additive model. The parametric confidence intervals (90%) of the mean values of the pharmacokinetic characteristics (AUC0-t, AUC0-infinity), Cmax and Cmax/AUC0-infinity) for T/R ratio were in each case well within the bioequivalence acceptable range of 80-125%. The test formulation was found bioequivalent to the reference formulation by the Schuirmann's two one-sided t-tests and by Wilcoxon Mann Whitney two one-sided tests procedure. Therefore, the 2 formulations were considered to be bioequivalent.
Subject(s)
Histamine H2 Antagonists/blood , Histamine H2 Antagonists/pharmacokinetics , Ranitidine/blood , Ranitidine/pharmacokinetics , Adult , Area Under Curve , Biological Availability , Chromatography, High Pressure Liquid , Cross-Over Studies , Fasting/blood , Histamine H2 Antagonists/administration & dosage , Humans , Male , Middle Aged , Ranitidine/administration & dosage , Therapeutic EquivalencyABSTRACT
An investigation was conducted to evaluate the effect of changing the Eudragit RL 100 ratio and the influence of different penetration enhancers in various concentrations on the release of prazosin from Carboset 525:Eudragit RL 100 polymeric films using improved Franz diffusion cells, to choose the most suitable polymeric film ratio, the most appropriate enhancer and its optimum concentration to be used to achieve the maximum release of the drug. The results show that prazosin release from polymeric films containing Carboset 525:Eudragit RL 100 in a 1:1 ratio was significantly (p < 0.05) higher than from films in a 1:0.25 ratio and non-significantly (p > 0.05) higher than from those containing 1:0.5, 1:3 polymer ratios and non-significantly lower from those containing 1:4 polymer ratios. The addition of various enhancers, n-decyl alcohol (7, 9 and 11% w/w), Azone (4, 6 and 8% w/w) and Cineole (7, 9, 11 and 14% w/w) significantly (p < 0.05) enhanced the prazosin release from these polymeric films containing the two polymers in a 1:1 ratio. The best concentrations of these enhancers were 11% n-decyl alcohol, 9% Cineole and 8% Azone. The formulations containing these concentrations of the enhancers are being further studied for drug release through rabbits skin. It was found that using either of these enhancers in these concentrations resulted in a significant (p < 0.05) increase in the amount of prazosin transported across the skin. On the other hand these enhancers did not show any significant (p > 0.05) difference between them. The mechanism of drug release from the polymeric films was further studied using water vapor permeability (W.V.P.), the permeability constant (P) and differential scanning calorimetry. The enhancers were found to increase the W.V.P. and the permeability constant (P) and the results were in very good agreement with the effect of enhancers on the in-vitro drug release. The DSC thermograms showed that the enhancers physically interacted with either or both of the polymeric film materials and prazosin which could be one of the reasons for the improvement in the release of the drug from these polymeric films.
Subject(s)
Acrylic Resins/chemistry , Adrenergic alpha-Antagonists/administration & dosage , Prazosin/administration & dosage , Administration, Cutaneous , Adrenergic alpha-Antagonists/pharmacokinetics , Animals , Calorimetry, Differential Scanning , Chromatography, High Pressure Liquid , Male , Prazosin/pharmacokinetics , Rabbits , Skin/metabolismABSTRACT
Meclofenamic acid (MFA) sustained-release microspheres were prepared by the solvent evaporation method using cellulose propionate (CP) polymer and acetone as the polymer solvent. Polyethylene glycol (PEG) was used as a channelling agent to improve the release properties of MFA at 1:2:1 drug to polymer to PEG ratio. The microspheres prepared at three different speeds (600, 800 and 1000 rpm) were characterized with regard to their surface morphology, average drug content, particle size distribution and release profiles in phosphate buffer, pH 8.0 at 37 degrees C. The microspheres were stored under accelerated conditions for 3 months and the effect of storage on the different characteristics was studied. Spherical particles with essentially smooth surface and few residual drug crystals on the surface were formed. Smaller particles were formed at higher agitation speeds. The release rate of MFA from these microspheres was not affected by the molecular weight of CP polymer. PEG 2000 was found to have a more enhancing effect on the rate of the release than PEG 4000. The physical properties of the microspheres and their release characteristics were not altered by storing the product at 40 degrees C/80% relative humidity (R.H.) for 3 months.
Subject(s)
Drug Compounding , Meclofenamic Acid/metabolism , Microspheres , Anti-Inflammatory Agents, Non-Steroidal/pharmacokinetics , Anti-Inflammatory Agents, Non-Steroidal/therapeutic use , Cellulose/analogs & derivatives , Cellulose/chemistry , Drug Storage/methods , Emulsions/chemistry , Emulsions/therapeutic use , Microscopy, Electron, Scanning , Particle Size , Polyethylene Glycols/chemistry , TemperatureABSTRACT
Sustained-release metoclopramide microspheres were successfully prepared using cellulose propionate polymer at 1:2 drug to polymer ratio employing solvent evaporation technique and using acetone as the polymer solvent. The prepared microspheres at three stirring speeds were characterized with regard to their drug content, particle size distribution, surface topography using SEM and their release profiles at two different pHs at 37 degrees C. The surface of all samples was smooth with very few irregular elevations or depressions. The average particle size decreases as the rotational speed increases and was found to be 1320, 774 and 345 microns at 600, 900 and 1200 rpm, respectively. The average % drug entrapped was found to be 90.5, 100.1 and 60.0% at 600, 900 and 1200 rpm, respectively. Small differences in the release rate were observed due to different rotation speeds with an apparent lower dissolution for batches produced at 1200 rpm probably due to the properties of the coat. The effect of storage under accelerated conditions for 10 weeks on the release characteristics of these microspheres was also studied. The release properties of the microspheres did not change after storing them at 40 degrees C/80% relative humidity for 10 weeks.
Subject(s)
Metoclopramide/administration & dosage , Metoclopramide/chemistry , Chemistry, Pharmaceutical/methods , Delayed-Action Preparations , Drug Stability , Evaluation Studies as Topic , Microscopy, Electron, Scanning , Microspheres , Particle SizeABSTRACT
This investigation was carried out to evaluate the bioavailability of a new tablet formulation of metoclopramide hydrochloride (10 mg), Metosil relative to a recognized product, Plasil BP. The two brands were found to be similar in assay and content uniformity and both met the BP requirements of disintegration time. The bioavailability was carried out on 18 healthy male volunteers who received a single dose (2 x 10 mg) of the test (T) and the recognized (R) products in a randomized balanced 2-way crossover design. After dosing, serial blood samples were collected for a period of 8 hours. Plasma harvested from blood was analyzed for metoclopramide by a sensitive and validated high-performance liquid chromatographic assay. The maximum plasma concentration (Cmax), area under the plasma concentration curve up to the last measurable concentration (AUC0-t), and to infinity (AUC0-00) were analyzed statistically under the assumption of a multiplicative model. The time to maximum concentration (Tmax) was analyzed assuming an additive model. The parametric confidence intervals (90%) of the mean values of the pharmacokinetic characteristics (AUC0-t AUC0-00 and Cmax) for T:R ratio were in each case well within the bioequivalence acceptable range of 0.8-1.25. The test formulation was found bioequivalent to the reference formulation by the Schuirmann's 2 one-sided t-tests and by Wilcoxon-Mann-Whitney 2 one-sided tests procedure. Therefore, the two formulations were considered to be bioequivalent.
Subject(s)
Metoclopramide/pharmacokinetics , Tablets/administration & dosage , Administration, Oral , Adult , Biological Availability , Chromatography, High Pressure Liquid , Cross-Over Studies , Drug Tolerance , Humans , Male , Metoclopramide/blood , Therapeutic EquivalencyABSTRACT
The effect of oral administration of activated charcoal on total body clearance of vancomycin administered intravenously (7.5 mg/kg) has been studied in normal rabbits and rabbits with induced renal failure. Gastric intubation of a single dose (10 g) of activated charcoal to normal rabbits did not produce a statistically significant effect on any pharmacokinetic parameter for vancomycin. The mean vancomycin clearances were (mean +/- s.d.) 80.82 +/- 6.8 and 75.24 +/- 9.61 ml/h/kg with and without activated charcoal administration, respectively. To examine whether renal failure would influence the effect of activated charcoal and enhance the systemic clearance of vancomycin, uranyl nitrate was used (0.75 mg/kg, i.v.) to induce acute renal failure in rabbits. The derived pharmacokinetic parameters of vancomycin were consistent with renal failure. No significant differences were observed in any of the calculated pharmacokinetic parameters between the control and charcoal treated rabbits. The lack of effect may be attributed to the large molecular weight of vancomycin.
Subject(s)
Acute Kidney Injury/metabolism , Charcoal/pharmacology , Vancomycin/pharmacokinetics , Acute Kidney Injury/chemically induced , Animals , Biological Assay , Creatinine/blood , Male , Rabbits , Staphylococcus aureus/drug effects , Uranyl Nitrate , Vancomycin/bloodABSTRACT
A simple microcomputer program in BASIC is designed to compute both the one-way and two-way analysis of variance. The program is an interactive one and can be easily and promptly used for statistical analysis of biomedical data. The applicability of the program is illustrated by data obtained from the percutaneous absorption of dihydroergotamine into the excised skin of rabbits.