ABSTRACT
Materials for radiation detection are critically important and urgently demanded in diverse fields, starting from fundamental scientific research to medical diagnostics, homeland security, and environmental monitoring. Low-dimensional halides (LDHs) exhibiting efficient self-trapped exciton (STE) emission with high photoluminescence quantum yield (PLQY) have recently shown a great potential as scintillators. However, an overlooked issue of exciton-exciton interaction in LDHs under ionizing radiation hinders the broadening of its radiation detection applications. Here, we demonstrate an exceptional enhancement of exciton-harvesting efficiency in zero-dimensional (0D) Cs3Cu2I5:Tl halide single crystals by forming strongly localized Tl-bound excitons. Because of the suppression of non-radiative exciton-exciton interaction, an excellent α/ß pulse-shape-discrimination (PSD) figure-of-merit (FoM) factor of 2.64, a superior rejection ratio of 10-9, and a high scintillation yield of 26 000 photons MeV-1 under 5.49 MeV α-ray are achieved in Cs3Cu2I5:Tl single crystals, outperforming the commercial ZnS:Ag/PVT composites for charged particle detection applications. Furthermore, a radiation detector prototype based on Cs3Cu2I5:Tl single crystal demonstrates the capability of identifying radioactive 220Rn gas for environmental radiation monitoring applications. We believe that the exciton-harvesting strategy proposed here can greatly boost the applications of LDHs materials.
ABSTRACT
In this study, we investigate the effects of Ho3+ codoping on the luminescence and scintillation properties of GGAG:Ce, with a particular focus on timing properties and scintillator efficiency. The research reveals that Ho3+ codoping and subsequent resonant energy transfer from Ce3+ to Ho3+ can significantly reduce the 5d1 excited state decay time of Ce3+ and shorten scintillation pulses of GGAG:Ce registered by using photomultipliers, although this reduces scintillator efficiency as well. The study presents a detailed analysis of the loss of scintillator efficiency due to Ho3+ codoping, identifying the most significant loss pathways and estimating their impact. The findings suggest that Ho3+ codoping is an effective method for accelerating the scintillation response of GGAG:Ce. Furthermore, the study presents a high level of consistency of the Ce3+ kinetics with the Inokuti-Hirayama model and with results obtained in the previous studies on similar systems, demonstrating the predictability of the effect of RE3+ codoping on scintillator properties.
ABSTRACT
Fast emitting polymeric scintillators are requested in advanced applications where high speed detectors with a large signal-to-noise ratio are needed. However, their low density implies a weak stopping power of high energy radiation and thus a limited light output and sensitivity. To enhance their performance, polymeric scintillators can be loaded with dense nanoparticles (NPs). We investigate the properties of a series of polymeric scintillators by means of photoluminescence and scintillation spectroscopy, comparing standard scintillators with a composite system loaded with dense hafnium dioxide (HfO2) NPs. The nanocomposite shows a scintillation yield enhancement of +100% with an unchanged time response. We provide for the first time an interpretation of this effect, pointing out the local effect of NPs in the generation of emissive states upon interaction with ionizing radiation. The obtained results indicate that coupling fast conjugated emitters with optically inert dense NPs could lead to surpassing the actual limits of pure polymeric scintillators.
ABSTRACT
Fast and high-resolution x-ray imaging demands scintillator films with negligible afterglow, high scintillation yield, and minimized cross-talk. However, grain boundaries (GBs) are abundant in polycrystalline scintillator film, and, for current inorganic scintillators, detrimental dangling bonds at GBs inevitably extend radioluminescence lifetime and increase nonradiative recombination loss, deteriorating afterglow and scintillation yield. Here, we demonstrate that scintillators with one-dimensional (1D) crystal structure, Cs5Cu3Cl6I2 explored here, possess benign GBs without dangling bonds, yielding nearly identical afterglow and scintillation yield for single crystals and polycrystalline films. Because of its 1D crystal structure, Cs5Cu3Cl6I2 films with desired columnar morphology are easily obtained via close space sublimation, exhibit negligible afterglow (0.1% at 10 ms) and high scintillation yield (1.2 times of CsI:Tl). We have also demonstrated fast x-ray imaging with 27 line pairs mm-1 resolution and frame rate up to 33 fps, surpassing most existing scintillators. We believe that the 1D scintillators can greatly boost x-ray imaging performance.
ABSTRACT
Lutetium oxyorthosilicate Lu2SiO5 (LSO) and pyrosilicate Lu2Si2O7 (LPS) activated by Ce3+ or Pr3+ are known to be effective and fast scintillation materials for the detection of X-rays and γ-rays. Their performances can be further improved by co-doping with aliovalent ions. Herein, we investigate the Ce3+(Pr3+) â Ce4+(Pr4+) conversion and the formation of lattice defects stimulated by co-doping with Ca2+ and Al3+ in LSO and LPS powders prepared by the solid-state reaction process. The materials were studied by electron paramagnetic resonance (EPR), radioluminescence spectroscopy, and thermally stimulated luminescence (TSL), and scintillation decays were measured. EPR measurements of both LSO:Ce and LPS:Ce showed effective Ce3+ â Ce4+ conversions stimulated by Ca2+ co-doping, while the effect of Al3+ co-doping was less effective. In Pr-doped LSO and LPS, a similar Pr3+ â Pr4+ conversion was not detected by EPR, suggesting that the charge compensation of Al3+ and Ca2+ ions is realized via other impurities and/or lattice defects. X-ray irradiation of LPS creates hole centers attributed to a hole trapped in an oxygen ion in the neighborhood of Al3+ and Ca2+. These hole centers contribute to an intense TSL glow peak at 450-470 K. In contrast to LPS, only weak TSL peaks are detected in LSO and no hole centers are visible via EPR. The scintillation decay curves of both LSO and LPS show a bi-exponential decay with fast and slow component decay times of 10-13 ns and 30-36 ns, respectively. The decay time of the fast component shows a small (6-8%) decrease due to co-doping.
ABSTRACT
Multicomponent nanomaterials consisting of dense scintillating particles functionalized by or embedding optically active conjugated photosensitizers (PSs) for cytotoxic reactive oxygen species (ROS) have been proposed in the last decade as coadjuvant agents for radiotherapy of cancer. They have been designed to make scintillation-activated sensitizers for ROS production in an aqueous environment under exposure to ionizing radiations. However, a detailed understanding of the global energy partitioning process occurring during the scintillation is still missing, in particular regarding the role of the non-radiative energy transfer between the nanoscintillator and the conjugated moieties which is usually considered crucial for the activation of PSs and therefore pivotal to enhance the therapeutic effect. We investigate this mechanism in a series of PS-functionalized scintillating nanotubes where the non-radiative energy transfer yield has been tuned by control of the intermolecular distance between the nanotube and the conjugated system. The obtained results indicate that non-radiative energy transfer has a negligible effect on the ROS sensitization efficiency, thus opening the way to the development of different architectures for breakthrough radiotherapy coadjutants to be tested in clinics.
Subject(s)
Nanostructures , Nanotubes , Photochemotherapy , Photochemotherapy/methods , Reactive Oxygen Species , Photosensitizing Agents/therapeutic useABSTRACT
We report on single crystal growth of laser material Nd:YAG widely used in the applications by the innovative crucible-free floating zone method implemented in an advanced laser optical furnace. We have optimized the parameters for the production of high-quality single crystals of the size typical for laser rods. To reduce the strain and improve machinability, we have developed an afterheater to thermalize the grown part of a single crystal below the hot zone, which is a technique unavailable in common mirror furnaces. The high quality of the single crystals was verified by Laue diffraction, and the internal strain was documented by neutron diffraction. The absorption spectrum corresponds with the parameters of the commercially used material produced by the Czochralski method. The presented methodology for the single crystal growth by the floating zone method with laser heating is applicable for the preparation of other high-quality single crystals of oxide-based materials, particularly in an oxidizing environment unattainable in commonly used crucible methods.
ABSTRACT
The crystals of (Lu,Gd)3(Ga,Al)5O12 multicomponent garnets with high density ρ and effective atomic number Zeff are characterized by high scintillation efficiency and a light yield value up to 50,000 ph/MeV. During recent years, single-crystalline films and composite film/crystal scintillators were developed on the basis of these multicomponent garnets. These film/crystal composites are potentially applicable for particle identification by pulse shape discrimination due to the fact that α-particles excite only the film response, γ-radiation excites only the substrate response, and ß-particles excite both to some extent. Here, we present new results regarding scintillating properties of selected (Lu,Gd)3(Ga,Al)5O12:Ce single-crystalline films under excitation by alpha and beta particles and gamma ray photons. We conclude that some of studied compositions are indeed suitable for testing in the proposed application, most notably Lu1.5Gd1.5Al3Ga2O12:Ce film on the GAGG:Ce substrate, exhibiting an α-particle-excited light yield of 1790-2720 ph/MeV and significantly different decay curves excited by α- and γ-radiation.
ABSTRACT
Low-dimensional Cu(I) perovskite halides with efficient exciton emissions have recently emerged as promising scintillation materials for X-ray and gamma-ray detection applications. Here, we demonstrate the possibility of using zero-dimensional Cs3Cu2I5 for the sensitive detection of thermal neutrons and neutron-gamma discrimination enabled by Li doping. Single crystals of Cs3Cu2I5 doped with 95% enriched 6Li were grown by the Bridgman method. Cs3Cu2I5:6Li offers a compelling combination of high stability against moisture and oxygen, a decent energy resolution of 4.8% for 662 keV 137Cs gamma-rays, a high light yield of 30â¯000 photons/MeV for gamma-rays, and 96â¯000 photons/neutron for thermal neutron, and a good neutron-gamma pulse shape discrimination figure of merit of 2.27. Our discovery of 6Li-doped low-dimensional perovskite halides opens up a new horizon for stable and high-performance neutron-gamma scintillator design.
ABSTRACT
Low-dimensional organic-metal halides are regarded as an emerging class of X-ray scintillation materials, but most of the discovered compounds are confronted with challenges of toxicity and instability. To address these challenges, we herein report two lead-free zero-dimensional (0D) hybrid halides, (Bmpip)2Cu2Br4 and PPh4CuBr2 single crystals, grown by the low-cost solution-processing method. By single-crystal X-ray diffraction refinement, the crystal structures of (Bmpip)2Cu2Br4 and PPh4CuBr2 were determined to be orthorhombic and monoclinic crystal systems, respectively. (Bmpip)2Cu2Br4 and PPh4CuBr2 show broadband orange and yellow emissions peaking at 620 and 538 nm, respectively. Different from the emission nature of the recent reported Cu-based halide hybrids, both (Bmpip)2Cu2Br4 and PPh4CuBr2 emit from excitons bound to defects featuring spin-allowed transition, enabling them to possess fast scintillation decay time of tens of nanoseconds, respectively. In particular, the (Bmpip)2Cu2Br4 single crystal has a high photoluminescence quantum yield of 48.2%, a high scintillation yield of 16,000 photons/MeV, and a low detection limit of 710 nGyair/s. Due to the combination of nontoxicity, long-term stability, and decent detection performance, (Bmpip)2Cu2Br4 could be regarded as a promising X-ray scintillator.
ABSTRACT
This manuscript summarizes recent results on the development of composite luminescent materials based on the single-crystalline films and single crystals of simple and mixed garnet compounds obtained by the liquid-phase epitaxy growth method. Such composite materials can be applied as scintillating and thermoluminescent (TL) detectors for radiation monitoring of mixed ionization fluxes, as well as scintillation screens in the microimaging techniques. The film and crystal parts of composite detectors were fabricated from efficient scintillation/TL materials based on Ce3+-, Pr3+-, and Sc3+-doped Lu3Al5O12 garnets, as well as Ce3+-doped Gd3-xAxAl5-yGayO12 mixed garnets, where A = Lu or Tb; x = 0-1; y = 2-3 with significantly different scintillation decay or positions of the main peaks in their TL glow curves. This work also summarizes the results of optical study of films, crystals, and epitaxial structures of these garnet compounds using absorption, cathodoluminescence, and photoluminescence. The scintillation and TL properties of the developed materials under α- and ß-particles and γ-quanta excitations were studied as well. The most efficient variants of the composite scintillation and TL detectors for monitoring of composition of mixed beams of ionizing radiation were selected based on the results of this complex study.
ABSTRACT
The sensitization of scintillation was investigated in crosslinked polymeric composite materials loaded with luminescent gold clusters aggregates acting as sensitizers, and with organic dye rhodamine 6G as the emitting species. The evolution in time of the excited states population in the systems is described by a set of coupled rate equations, in which steady state solution allowed obtainment of an expression of the sensitization efficacy as a function of the characteristic parameters of the employed luminescent systems. The results obtained indicate that the realization of sensitizer/emitter scintillating complexes is the strategy that must be pursued to maximize the sensitization effect in composite materials.
ABSTRACT
CsPbBr3 nanocrystals have been identified as a highly promising material for various optoelectronic applications. However, they tend to coexist with Cs4PbBr6 phase when the reaction conditions are not controlled carefully. It is therefore imperative to understand how the presence of this phase affects the luminescence performance of CsPbBr3 nanocrystals. We synthesized a mixed CsPbBr3-Cs4PbBr6 sample, and compared its photo- and radioluminescence properties, including timing characteristics, to the performance of pure CsPbBr3 nanocrystals. The possibility of energy transfer between the two phases was also explored. We demonstrated that the presence of Cs4PbBr6 causes significant drop in radioluminescence intensity of CsPbBr3 nanocrystals, which can limit possible future applications of Cs4PbBr6-CsPbBr3 mixtures or composites as scintillation detectors.
ABSTRACT
A novel all-inorganic CsCu2I3 single-crystalline perovskite as a nonhygroscopic and efficient X-ray and γ-ray scintillator is described herein. It is featured by a one-dimensional (1D) perovskite structure with an orthorhombic system and a space group of Cmcm. The CsCu2I3 crystal emits yellow light peaking at 570 nm originated from strongly localized 1D exciton emission. It appears self-absorption free because of the large Stokes shift of 1.54 eV. The photophysics process of the self-trapped exciton was studied using temperature dependent photoluminescene spectra and decay kinetics measurements. The CsCu2I3 crystal exhibits an extremely low afterglow level of 0.008% at 10 ms under X-ray excitation. Under 137Cs γ-ray irradiation, its light yield is 16â¯000 photons/MeV with an energy resolution of 7.8% at 662 keV.
ABSTRACT
Heat treatment is needed to increase the luminescence intensity of ZnO:Ga particles, but it comes at the cost of higher particle agglomeration. Higher agglomeration results in low transparency of scintillating powder when embedded in a matrix and constitutes one of the biggest disadvantages, besides low light yield and low stopping power, of ZnO:Ga powder. Limiting ZnO:Ga particle size is therefore a key step in order to prepare highly luminescent and transparent composites with prospects for optical applications. In this work, SiO2 coating was successfully used to improve luminescence intensity or limitation of crystallite size growth during further annealing. Furthermore, ZnO:Ga and ZnO:Ga-SiO2 core-shells were embedded in a polystyrene matrix.
ABSTRACT
While doping of semiconductors or oxides is crucial for numerous technological applications, its control remains difficult especially when the material is reduced down to the nanometric scale. In this paper, we show that pulsed laser ablation of an undoped solid target in an aqueous solution containing activator ions offers a new way to synthesise doped-nanoparticles. The doping efficiency is evaluated for laser ablation of an undoped Gd2O3 target in aqueous solutions of EuCl3 with molar concentration from 10-5 mol L-1 to 10-3 mol L-1. Thanks to luminescence experiments, we show that the europium ions penetrate the core of the synthesised monoclinic Gd2O3 nanoparticles. We also show that the concentration of the activators in the nanoparticles is proportional to the initial concentration in europium ions in the aqueous solution, and a doping of about 1% ([Eu]/[Gd] atomic ratio) is reached. On the one hand, this work could open new ways for the synthesis of doped nanomaterials. On the other hand, it also raises the question of undesired penetration of impurities in laser-generated nanoparticles in liquids.
ABSTRACT
Photo-induced synthesis was used for preparation of powder Zn(Cd,Mg)O:Ga scintillating nanocrystals featuring properties of solid solutions. Only ZnO phase was identified without any phase separation up to 10% of Cd after optimization of the preparation. Radioluminescence spectra show the exciton-related emission in UV spectral range with significant blue (ZnMgO:Ga) or red (ZnCdO:Ga) shifts. The emission wavelength is tunable by the Cd/Mg content. Defect-related emission is completely suppressed after treatment in reducing atmosphere. Photoluminescence and cathodoluminescence decays show extremely fast component. Subnanosecond decay together with band gap modulation make Zn(Cd,Mg)O:Ga good candidate for practical applications like X-ray induced photodynamic therapy (PDTX) or those requiring superfast timing.
ABSTRACT
In this Letter, for the first time, to the best of our knowledge, a pulse and CW laser based on an Er-doped Gd3Ga2.7Al2.3O12 (Er:GGAG) active medium emitting laser radiation at 2.8 µm are presented. With the longitudinal diode pumping, the maximal output energy of 4.9 mJ and slope efficiency of 13.5% in the pulse regime were reached. Using the birefringent MgF2 plate, the line tunability of Er:GGAG at several spectral bands of 2800-2822 nm, 2829-2891 nm, and 2917-2942 nm were obtained.
ABSTRACT
Luminescent nanoparticles are researched for their potential impact in medical science, but no materials approved for parenteral use have been available so far. To overcome this issue, we demonstrate that Eu3+-doped hafnium dioxide nanocrystals can be used as non-toxic, highly stable probes for cellular optical imaging and as radiosensitive materials for clinical treatment. Furthermore, viability and biocompatibility tests on artificially stressed cell cultures reveal their ability to buffer reactive oxygen species, proposing an anti-cytotoxic feature interesting for biomedical applications.
Subject(s)
Europium/chemistry , Hafnium/chemistry , Luminescence , Nanoparticles/chemistry , Animals , Biocompatible Materials , Cell Line , Luminescent Measurements , Mice , Reactive Oxygen Species/chemistryABSTRACT
A highly prospective drug for the X-ray induced photodynamic therapy (PDTX), LuAG:Pr3+@SiO2-PpIX nanocomposite, was successfully prepared by a three step process: photo-induced precipitation of the Lu3Al5O12:Pr3+ (LuAG:Pr3+) core, sol-gel technique for amorphous silica coating, and a biofunctionalization by attaching the protoporphyrin IX (PpIX) molecules. The synthesis procedure provides three-layer nanocomposite with uniform shells covering an intensely luminescent core. Room temperature radioluminescence (RT RL) spectra as well as photoluminescence (RT PL) steady-state and time resolved spectra of the material confirm the non-radiative energy transfer from the core Pr3+ ions to the PpIX outer layer. First, excitation of Pr3+ ions results in the red luminescence of PpIX. Second, the decay measurements exhibit clear evidence of mentioned non-radiative energy transfer (ET). The singlet oxygen generation in the system was demonstrated by the 3'-(p-aminophenyl) fluorescein (APF) chemical probe sensitive to the singlet oxygen presence. The RT PL spectra of an X-ray irradiated material with the APF probe manifest the formation of singlet oxygen due to which enhanced luminescence around 530â¯nm is observed. Quenching studies, using NaN3 as an 1O2 inhibitor, also confirm the presence of 1O2 in the system and rule out the parasitic reaction with OH radicals. To summarize, presented features of LuAG:Pr3+@SiO2-PpIX nanocomposite indicate its considerable potential for PDTX application.