ABSTRACT
Molds are used to dictate their shape to other materials in embossing or filling processes. In optics fabrication especially, the exact surface slope of the polymer replica is of high relevance. The quality control of molds is challenging: non-invasive, optical metrologies struggle with shiny surfaces that minimize the scattering of light. In addition, the inspection of complex shaped molds with a stepped optical surface can be difficult. In response, the authors show a backward ray-tracing approach combined with fringe-reflection technique to determine the slopes of a Fresnel-shaped mold surface with topography features in the magnitude order of a quarter millimeter. The error is kept small by stitching together several measurements with different sample rotations.
ABSTRACT
We describe a procedure to estimate the calibration function for an experimental setup that contains a transmitting diffuser whose bidirectional transmittance distribution function for light transmitted in normal direction is nearly independent of the incidence angle. This type of diffusing screen may be used in experimental setups to measure the irradiance distribution in the focal plane of concentrator optics that have large angles of incidence in the focal plane. It is shown that the influence of this screen and of the remaining components on the irradiance distribution may be described empirically by a Gaussian function and thus may be corrected for. Furthermore, it is demonstrated that the correction is necessary to avoid an underestimation of the concentrator optics' ability to concentrate the incoming radiation.
ABSTRACT
Fresnel lenses are widely used in concentrating photovoltaic (CPV) systems as primary optical elements focusing sunlight onto small solar cells or onto entrance apertures of secondary optical elements attached to the solar cells. Calculations using the Young-Maggi-Rubinowicz theory of diffraction yield analytical expressions for the amount of light spilling outside these target areas due to diffraction at the edges of the concentrator Fresnel lenses. Explicit equations are given for the diffraction loss due to planar Fresnel lenses with small prisms and due to arbitrarily shaped Fresnel lenses. Furthermore, the cases of illumination by monochromatic, polychromatic, totally spatially coherent and partially spatially coherent light (e.g. from the solar disc) are treated, resulting in analytical formulae. Examples using realistic values show losses due to diffraction of up to several percent.
ABSTRACT
Spherical voids as light scattering centers in nanocrystalline TiO2 films were realized with polystyrene particles of diameter 400 nm, thus enhancing the photovoltaic performance by 25% on large areas, as well as providing an indication that these films can be used with electrolytes of higher viscosity.