Chitosan -NH2 derived efficient Co3O4 catalyst for styrene catalytic oxidation: Simultaneously regulating particle size and Co valence.

In this study, a Co3O4 catalyst is synthesised using the chitosan-assisted sol-gel method, which simultaneously regulates the grain size, Co valence and surface acidity of the catalyst through a chitosan functional group. The complexation of the free -NH2 complex inhibits particle agglomeration; thus, the average particle size of the catalyst decreases from 82 to 31 nm. Concurrently, Raman spectroscopy, hydrogen temperature-programmed reduction, electron paramagnetic resonance spectroscopy and X-ray photoelectron spectroscopy experiments demonstrate that doping with chitosan N sources effectively modulates Co2+ to promote the formation of oxygen vacancies. In addition, water washing after catalyst preparation can considerably improve the low-temperature (below 250 °C) activity of the catalyst and eliminate the side effects of alkali metal on catalyst activity. Moreover, the presence of Brønsted and Lewis acid sites promotes the adsorption of C8H8. Consequently, CS/Co3O4-W presents the highest catalytic oxidation activity for C8H8 at low temperatures (R250 °C = 8.33 µmol g-1 s-1, WHSV = 120,000 mL hr-1∙g-1). In situ DRIFTS and 18O2 isotope experiments demonstrate that the oxidation of the C8H8 reaction is primarily dominated by the Mars-van Krevelen mechanism. Furthermore, CS/Co3O4-W exhibits superior water resistance (1- and 2- vol% H2O), which has the potential to be implemented in industrial applications.

Oxygen self-supplied nanoparticle for enhanced chemiexcited photodynamic therapy.

Photodynamic therapy (PDT) is a promising strategy for effective cancer treatment. However, it still faces severe challenges, including poor laser penetration and insufficient oxygen (O2) in solid tumors. Here, we constructed intelligent O2self-supplied nanoparticles (NPs) for tumor hypoxia relief as well as effective chemiexcited PDT. Oxygen-carrying NPs (BSA@TCPO NPs) were obtained via the self-assembly of bovine serum albumin (BSA), bis[3,4,6-trichloro2-(pentyloxycarbonyl)phenyl]oxalate (TCPO), perfluorohexane (PFH), and chlorin e6 (Ce6). In H2O2-overexpressed tumor cells, TCPO in the NPs reacted with H2O2, releasing energy to activate the photosensitizer Ce6 and generate cytotoxic singlet oxygen (1O2) to kill tumor cells in a laser irradiation-independent manner. Moreover, the O2carried by PFH not only reduced therapeutic resistance by alleviating tumor hypoxia but also increased1O2generation for enhanced chemiexcited PDT. The remarkable cytotoxicity to various cancer cell lines and A549 tumors demonstrated the advantage of BTPC in alleviating the hypoxic status and inhibiting tumor growth. Our results demonstrate that BTPC is a promising nanoplatform for cancer therapy.

Low-cost diatomite supported binary transition metal sulfates: an efficient reusable solid catalyst for biodiesel synthesis.

Using a simple method of impregnation and then calcination, diatomite supported binary transition metal sulfates (Fe and Zr, designated as Fe2(SO4)3&Zr(SO4)2@diatomite) were prepared and used as a catalyst in the preparation of renewable biofuels. The synthesised Fe2(SO4)3&Zr(SO4)2@diatomite catalyst (Fe2(SO4)3 : Zr(SO4)2 : diatomite = 1 : 2 : 6, mass ratio) was thoroughly characterised using transmission electron microscopy (TEM), X-ray diffraction (XRD), Fourier-transform infrared (FTIR) spectroscopy, microbeam X-ray fluorescence (µ-XRF) spectroscopy and thermogravimetric analysis (TG). The results demonstrated that the sulfate was successfully loaded onto the diatomite with a uniform distribution. The N2 adsorption/desorption analysis indicated that the catalyst's specific surface area was 1.54 m2 g-1. The catalyst exhibited outstanding performance in the preparation of renewable biofuel (biodiesel) from waste fatty acids and the optimal parameters were methanol-to-oil 1.25 : 1, reaction temperature 70 °C, catalyst concentration 10 wt%, reaction time 4 h. The conversion was found to reach 98.90% under optimal parameters, which is better than that of Fe2(SO4)3·xH2O, Zr(SO4)2·4H2O, Fe2(SO4)3@diatomite and Zr(SO4)2@diatomite. Moreover, the catalyst can be recycled by simple filtration and reused for three cycles after regeneration without noticeable reduction in catalytic activity.

Anti-inflammatory effect of flavonoids from chestnut flowers in lipopolysaccharide-stimulated RAW 264.7 macrophages and acute lung injury in mice.

ETHNOPHARMACOLOGICAL RELEVANCE: Chestnut flowers were one of the by-products during chestnut industrial processing. Chestnut (Castanea mollissima Blume) flower is rich in flavonoids and has been used as a traditional medicine to treat a variety of diseases including respiratory disorders for a long history. AIM OF THE STUDY: The present study aims to investigate the potential anti-inflammatory effect of flavonoids from chestnut flower (FCF) in lipopolysaccharide (LPS)-treated RAW 264.7 cells and stimulated acute lung injury (ALI) in mice. MATERIALS AND METHODS: HPLC-ESI-MS/MS was applied to identify flavonoids from Chestnut flower. The ROS content in cells and lung tissue was measured by flow cytometry. The malondialdehyde (MDA) content, superoxide dismutase (SOD) activity and glutathione (GSH) content in cells and bronchoalveolar lavage fluid (BALF) was analyzed by photometry. Furthermore, the level of pro-inflammatory factors was analyzed by ELISA, and the expression of inflammatory gene mRNA by fluorescence quantitative PCR. H&E staining was used to evaluate the degree of lung tissue injury in mice. MPO activity was used to measure the degree of neutrophil infiltration. Total protein content was detected by BCA method. RESULTS: A total of forty-nine flavonoids compounds were tentatively identified in FCF by mass spectrometry analysis. The results of cell experiment suggested that FCF could alleviate oxidative injury via increasing SOD activity and GSH content, as well as inhibiting the production of intracellular ROS and MDA. FCF exerted its protective effect by suppressing the expression of both inducible nitric oxide synthase (iNOS) and cycooxygenase 2 (COX-2) to inhibit the synthesis of pro-inflammatory factors and cytokines, including NO, PGE2, TNF-α, IL-6 and IL-1ß. Besides, FCF treatment could alleviate the thickening of alveolar wall and pulmonary congestion in LPS-treated ALI mice, and significantly inhibit the activity of myeloperoxidas (MPO) and the expression of cytokines in BALF. CONCLUSIONS: FCF could ameliorate inflammation and oxidative stress in LPS-treated inflammation, resulting in an overall improvement in both macroscopic and histological parameters.

N-doped CoAl oxides from hydrotalcites with enhanced oxygen vacancies for excellent low-temperature propane oxidation.

A series of nitrogen-doped CoAlO (N-CoAlO) were constructed by a hydrothermal route combined with a controllable NH3 treatment strategy. The effects of NH3 treatment on the physico-chemical properties and oxidation activities of N-CoAlO catalysts were investigated. In comparison to CoAlO, a smallest content decrease in surface Co3+ (serving as active sites) while a largest increased amount of surface Co2+ (contributing to oxygen species) are obtained over N-CoAlO/4h among the N-CoAlO catalysts. Meanwhile, a maximum N doping is found over N-CoAlO/4h. As a result, N-CoAlO/4h (under NH3 treatment at 400°C for 4 hr) with rich oxygen vacancies shows optimal catalytic activity, with a T90 (the temperature required to reach a 90% conversion of propane) at 266°C. The more oxygen vacancies are caused by the co-operative effects of N doping and suitable reduction of Co3+ for N-CoAlO/4h, leading to an enhanced oxygen mobility, which in turn promotes C3H8 total oxidation activity dominated by Langmuir-Hinshelwood mechanism. Moreover, in situ diffuse reflectance infrared Fourier transform spectroscopy (DRIFTs) analysis shows that N doping facilities the decomposition of intermediate species (propylene and formate) into CO2 over the catalyst surface of N-CoAlO/4h more easily. Our reported design in this work will provide a promising way to develop abundant oxygen vacancies of Co-based catalysts derived from hydrotalcites by a simple NH3 treatment.

Chelating-Template-Assisted in Situ Encapsulation of Zinc Ferrite Inside Silica Mesopores for Enhanced Gas-Sensing Characteristics.

A facile in situ approach has been designed to synthesize zinc ferrite/mesoporous silica guest-host composites. Chelating surfactant, N-hexadecyl ethylenediamine triacetic acid, was employed as structure-directing agent to fabricate mesoporous silica skeleton and simultaneously as complexing agent to incorporate stoichiometric amounts of zinc and iron ions into silica cavities. On this basis, spinel zinc ferrite nanoparticles with grain sizes less than 3 nm were encapsulated in mesoporous channels after calcination. The silica mesostructure, meanwhile, displayed a successive transformation from hexagonal p6mm through bicontinuous cubic Ia3̅d to lamellar phase with increasing the dopant concentration in the initial template solution. In comparison with zinc ferrite nanopowder prepared without silica host, the composite with bicontinuous architecture exhibited higher sensitivity, lower detection limit, lower optimum working temperature, quicker response, and shorter recovery time in sensing performance toward hydrogen sulfide. The significant improvements are from the high surface-to-volume ratio of the guest oxides and the three-dimensional porous structure of the composite. We believe the encapsulation route presented here may pave the way for directly introducing complex metal oxide into mesoporous silica matrix with tailorable mesophases for applications in sensing or other fields.

Fabrication and photoluminescent properties of ZnO/mesoporous silica composites templated by a chelating surfactant.

A novel anionic surfactant-templated synthesis of ZnO/mesoporous silica nanocomposites has been carried out by using N-hexadecylethylenediamine triacetate (HED3A), a triprotic surfactant, as the structure-directing agent. The chelating template can capture zinc ions in solution and then direct the mesophase formation, enabling an amount of zinc oxide to be embedded in the porous silica matrix during calcination. With variation of the molar ratio of Zn(2+) to HED3A in the template, a series of composites with different doping amounts were obtained after the removal of organic components. The variation of the zinc ion concentration in the initial template solution induces an evolution of the silica mesophase, presumably due to the change in electronegativity of the HED3A headgroup caused by the chelating effect. Spectroscopic studies show a strong host-guest interaction between the silica pore walls and ultrafine ZnO nanoparticles. The photoluminescence properties of the resulting composites exhibit a size-dependent light emission and quantum-confinement effect of ZnO, accompanied by an infrequent violet emission originating from the ZnO-SiO(2) interface.

Chelating template-induced encapsulation of NiO cluster in mesoporous silica via anionic surfactant-templated route.

In this study, we develop a novel one-step method for synthesis of nickel oxide/silicon dioxide (NiO/SiO(2)) mesoporous composites by using N-hexadecyl ethylenediamine triacetate (HED3A) as structure-directing agent. Besides playing a role in directing the mesophase formation, the anionic surfactant also functions as a chelating agent that binds nickel ions. Ultraviolet-visible (UV-vis) and Fourier transform infrared (FTIR) spectroscopic analyses were undertaken to determine the chelating ability between HED3A and nickel ions. By adjusting the molar ratio of Ni(2+)/HED3A in the template solution, a series of mesoporous composites with various NiO contents were obtained after calcination. These composites were characterized by X-ray diffraction (XRD), high resolution transmission electron microscopy (HRTEM), and nitrogen adsorption/desorption. The results showed that the generated NiO nanoparticles were aggregated into clusters with the size less than 20 nm, and the composites retained mesoporous characteristics even with high NiO contents. HRTEM images also revealed the migration and aggregation for NiO nanoparticles during the sintering process. Moreover, the energy-dispersive X-ray spectrum (EDX) results showed a close linear relationship between Ni/Si in the composites and Ni(2+)/HED3A in the templates. This chelating surfactant-assistant encapsulation route has the potential to synthesize diversiform metal oxide/silica mesoporous composites with designated compositions.