ATP-induced conformational change of axonemal outer dynein arms revealed by cryo-electron tomography.

Axonemal outer dynein arm (ODA) motors generate force for ciliary beating. We analyzed three states of the ODA during the power stroke cycle using in situ cryo-electron tomography, subtomogram averaging, and classification. These states of force generation depict the prepower stroke, postpower stroke, and intermediate state conformations. Comparison of these conformations to published in vitro atomic structures of cytoplasmic dynein, ODA, and the Shulin-ODA complex revealed differences in the orientation and position of the dynein head. Our analysis shows that in the absence of ATP, all dynein linkers interact with the AAA3/AAA4 domains, indicating that interactions with the adjacent microtubule doublet B-tubule direct dynein orientation. For the prepower stroke conformation, there were changes in the tail that is anchored on the A-tubule. We built models starting with available high-resolution structures to generate a best-fitting model structure for the in situ pre- and postpower stroke ODA conformations, thereby showing that ODA in a complex with Shulin adopts a similar conformation as the active prepower stroke ODA in the axoneme.

Bld10p/Cep135 determines the number of triplets in the centriole independently of the cartwheel.

The conserved nine-fold structural symmetry of the centriole is thought to be generated by cooperation between two mechanisms, one dependent on and the other independent of the cartwheel, a sub-centriolar structure consisting of a hub and nine spokes. However, the molecular entity of the cartwheel-independent mechanism has not been elucidated. Here, using Chlamydomonas reinhardtii mutants, we show that Bld10p/Cep135, a conserved centriolar protein that connects cartwheel spokes and triplet microtubules, plays a central role in this mechanism. Using immunoelectron microscopy, we localized hemagglutinin epitopes attached to distinct regions of Bld10p along two lines that connect adjacent triplets. Consistently, conventional and cryo-electron microscopy identified crosslinking structures at the same positions. In centrioles formed in the absence of the cartwheel, truncated Bld10p was found to significantly reduce the inter-triplet distance and frequently form eight-microtubule centrioles. These results suggest that the newly identified crosslinks are comprised of part of Bld10p/Cep135. We propose that Bld10p determines the inter-triplet distance in the centriole and thereby regulates the number of triplets in a cartwheel-independent manner.

A dynein-associated photoreceptor protein prevents ciliary acclimation to blue light.

Light-responsive regulation of ciliary motility is known to be conducted through modulation of dyneins, but the mechanism is not fully understood. Here, we report a novel subunit of the two-headed f/I1 inner arm dynein, named DYBLUP, in animal spermatozoa and a unicellular green alga. This subunit contains a BLUF (sensors of blue light using FAD) domain that appears to directly modulate dynein activity in response to light. DYBLUP (dynein-associated BLUF protein) mediates the connection between the f/I1 motor domain and the tether complex that links the motor to the doublet microtubule. Chlamydomonas lacking the DYBLUP ortholog shows both positive and negative phototaxis but becomes acclimated and attracted to high-intensity blue light. These results suggest a mechanism to avoid toxic strong light via direct photoregulation of dyneins.

Alternative evolution of a spheroidal colony in volvocine algae: developmental analysis of embryogenesis in Astrephomene (Volvocales, Chlorophyta).

BACKGROUND: Volvocine algae, which range from the unicellular Chlamydomonas to the multicellular Volvox with a germ-soma division of labor, are a model for the evolution of multicellularity. Within this group, the spheroidal colony might have evolved in two independent lineages: Volvocaceae and the goniacean Astrephomene. Astrephomene produces spheroidal colonies with posterior somatic cells. The feature that distinguishes Astrephomene from the volvocacean algae is lack of inversion during embryogenesis; the volvocacean embryo undergoes inversion after successive divisions to orient flagella toward the outside. The mechanisms of inversion at the molecular and cellular levels in volvocacean algae have been assessed in detail, particularly in Volvox carteri. However, embryogenesis in Astrephomene has not been subjected to such investigations. RESULTS: This study relied on light microscopy time-lapse imaging using an actively growing culture of a newly established strain to conduct a developmental analysis of Astrephomene as well as to perform a comparison with the similar spheroidal volvocacean Eudorina. During the successive divisions involved in Astrephomene embryogenesis, gradual rotation of daughter protoplasts resulted in movement of their apical portions toward the embryonic posterior, forming a convex-to-spheroidal cell sheet with the apical ends of protoplasts on the outside. Differentiation of the posterior somatic cells from the embryo periphery was traced based on cell lineages during embryogenesis. In contrast, in Eudorina, the rotation of daughter protoplasts did not occur during successive cell divisions; however, inversion occurred after such divisions, and a spheroidal embryo was formed. Indirect immunofluorescence microscopy of basal bodies and nuclei verified this difference between Astrephomene and Eudorina in the movement of embryonic protoplasts. CONCLUSIONS: These results suggest different tactics for spheroidal colony formation between the two lineages: rotation of daughter protoplasts during successive cell divisions in Astrephomene, and inversion after cell divisions in Eudorina. This study will facilitate further research into the molecular and genetic mechanisms of the parallel evolution of the spheroidal colony in volvocine algae.

SAS-6 engineering reveals interdependence between cartwheel and microtubules in determining centriole architecture.

Centrioles are critical for the formation of centrosomes, cilia and flagella in eukaryotes. They are thought to assemble around a nine-fold symmetric cartwheel structure established by SAS-6 proteins. Here, we have engineered Chlamydomonas reinhardtii SAS-6-based oligomers with symmetries ranging from five- to ten-fold. Expression of a SAS-6 mutant that forms six-fold symmetric cartwheel structures in vitro resulted in cartwheels and centrioles with eight- or nine-fold symmetries in vivo. In combination with Bld10 mutants that weaken cartwheel-microtubule interactions, this SAS-6 mutant produced six- to eight-fold symmetric cartwheels. Concurrently, the microtubule wall maintained eight- and nine-fold symmetries. Expressing SAS-6 with analogous mutations in human cells resulted in nine-fold symmetric centrioles that exhibited impaired length and organization. Together, our data suggest that the self-assembly properties of SAS-6 instruct cartwheel symmetry, and lead us to propose a model in which the cartwheel and the microtubule wall assemble in an interdependent manner to establish the native architecture of centrioles.

Space-dependent formation of central pair microtubules and their interactions with radial spokes.

Cilia and flagella contain nine outer doublet microtubules and a pair of central microtubules. The central pair of microtubules (CP) is important for cilia/flagella beating, as clearly shown by primary ciliary dyskinesia resulting from the loss of the CP. The CP is thought to regulate axonemal dyneins through interaction with radial spokes (RSs). However, the nature of the CP-RS interaction is poorly understood. Here we examine the appearance of CPs in the axonemes of a Chlamydomonas mutant, bld12, which produces axonemes with 8 to 11 outer-doublets. Most of its 8-doublet axonemes lack CPs. However, in the double mutant of bld12 and pf14, a mutant lacking the RS, most 8-doublet axonemes contain the CP. Thus formation of the CP apparently depends on the internal space limited by the outer doublets and RSs. In 10- or 11-doublet axonemes, only 3-5 RSs are attached to the CP and the doublet arrangement is distorted most likely because the RSs attached to the CP pull the outer doublets toward the axonemal center. The CP orientation in the axonemes varies in double mutants formed between bld12 and mutants lacking particular CP projections. The mutant bld12 thus provides the first direct and visual information about the CP-RS interaction, as well as about the mechanism of CP formation.

The simplest integrated multicellular organism unveiled.

Volvocine green algae represent the "evolutionary time machine" model lineage for studying multicellularity, because they encompass the whole range of evolutionary transition of multicellularity from unicellular Chlamydomonas to >500-celled Volvox. Multicellular volvocalean species including Gonium pectorale and Volvox carteri generally have several common morphological features to survive as integrated multicellular organisms such as "rotational asymmetry of cells" so that the cells become components of the individual and "cytoplasmic bridges between protoplasts in developing embryos" to maintain the species-specific form of the multicellular individual before secretion of new extracellular matrix (ECM). However, these morphological features have not been studied in the four-celled colonial volvocine species Tetrabaena socialis that is positioned in the most basal lineage within the colonial or multicellular volvocine greens. Here we established synchronous cultures of T. socialis and carried out immunofluorescence microscopic and ultrastructural observations to elucidate these two morphological attributes. Based on immunofluorescence microscopy, four cells of the mature T. socialis colony were identical in morphology but had rotational asymmetry in arrangement of microtubular rootlets and separation of basal bodies like G. pectorale and V. carteri. Ultrastructural observations clearly confirmed the presence of cytoplasmic bridges between protoplasts in developing embryos of T. socialis even after the formation of new flagella in each daughter protoplast within the parental ECM. Therefore, these two morphological attributes might have evolved in the common four-celled ancestor of the colonial volvocine algae and contributed to the further increase in cell number and complexity of the multicellular individuals of this model lineage. T. socialis is one of the simplest integrated multicellular organisms in which four identical cells constitute the individual.