Chitosan-Based Films with 2-Aminothiophene Derivative: Formulation, Characterization and Potential Antifungal Activity.

In this study, films of chitosan and 2-amino-4,5,6,7-tetrahydrobenzo[b]thiophene-3-carbonitrile (6CN), a 2-aminothiophene derivative with great pharmacological potential, were prepared as a system for a topical formulation. 6CN-chitosan films were characterized by physicochemical analyses, such as Fourier-transform infrared spectroscopy (FTIR), differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), X-ray diffraction (XRD), and scanning electronic microscopy (SEM). Additionally, the antifungal potential of the films was evaluated in vitro against three species of Candida (C. albicans, C. tropicalis, and C. parapsilosis). The results of the FTIR and thermal analysis showed the incorporation of 6CN in the polymer matrix. In the diffractogram, the 6CN-chitosan films exhibited diffraction halos that were characteristic of amorphous structures, while the micrographs showed that 6CN particles were dispersed in the chitosan matrix, exhibiting pores and cracks on the film surface. In addition, the results of antifungal investigation demonstrated that 6CN-chitosan films were effective against Candida species showing potential for application as a new antifungal drug.

A New Ferulic Acid-Nicotinamide Cocrystal With Improved Solubility and Dissolution Performance.

Among the various strategies for increasing aqueous solubility of pharmaceutical substances, cocrystals have been emerging as a promising alternative. The ferulic acid (FEA) is a molecule with limited aqueous solubility, but with an interesting pharmacological activity, highlighting its antitumor potential. This study presents the characterization and physicochemical properties of a new cocrystal based on FEA and nicotinamide (NIC). The FEA-NIC cocrystal was obtained by solvent evaporation technique and physicochemically characterized by differential scanning calorimetry, powder X-ray diffraction, Fourier transform infrared spectroscopy, solid-state nuclear magnetic resonance and scanning electron microscopy. The content determination and dissolution profile in different media were analyzed by high-performance liquid chromatography. The results obtained with the characterization techniques indicated the obtainment of an anhydrous cocrystal of FEA and NIC at a 1:1 molar ratio. The method was reproducible and obtained a high yield, of approximately 99%. In addition, a 70% increase in the FEA solubility in the cocrystal and a better dissolution performance than the physical mixture in pH 6.8 were achieved.

Development and validation of a stability indicating HPLC method to determine diltiazem hydrochloride in tablets and compounded capsules

ABSTRACT A stability indicating HPLC method to determine diltiazem hydrochloride (DTZ) in tablets and compounded capsules was developed and validated according to Brazilian and the International Conference on Harmonization (ICH) guidelines. The separation was carried out on a Purospher Star® C18 (150 x 4.6 mm i.d., 5 µm particle size, Merck Millipore) analytical column. The mobile phase consisted of a 0.05% (v/v) trifluoroacetic acid aqueous solution and a 0.05% trifluoroacetic acid methanolic solution (44:56, v/v). The flow rate was 1.0 mL.min-1 with a run time of 14 minutes. The detection of DTZ and degradation products (DP) was performed at 240 nm, using a diode array detector. The method proved to be linear, precise, accurate, selective, and robust, and was adequate for stability studies and routine quality control analyses of DTZ in tablets and compounded capsules.

Assessment of Phenolic Compounds and Anti-Inflammatory Activity of Ethyl Acetate Phase of Anacardium occidentale L. Bark.

The bark of A. occidentale L. is rich in tannins. Studies have described various biological activities of the plant, including antimicrobial, antioxidant, antiulcerogenic and antiinflammatory actions. The objective of this study was to assess the activity of the ethyl acetate phase (EtOAc) of A. occidentale on acute inflammation and to identify and quantify its phenolic compounds by HPLC. The method was validated and shown to be linear, precise and accurate for catechin, epicatechin, epigallocatechin and gallic acid. Swiss albino mice (Mus musculus) were treated with saline, Carrageenan (2.5%), Indomethacin (10 mg/kg), Bradykinin (6 nmol) and Prostaglandine E2 (5 µg) at different concentrations of EtOAc - A. occidentale (12.5; 25; 50; and 100 mg/kg/weight p.o.) for the paw edema test. Challenge was performed with carrageenan (500 µg/mL i.p.) for the doses 50 and 100 mg/kg of EtOAc. Levels of cytokines IL-1, TNF-α, IL-6 and IL-10 were also measured. All EtOAc - A. occidentale concentrations reduced the edema. At 50 and 100 mg/kg, an anti-inflammatory response of the EtOAc was observed. Carrageenan stimulus produced a neutrophil count of 28.6% while 50 and 100 mg/kg of the phase reduced this to 14.5% and 9.1%, respectively. The EtOAc extract reduced levels of IL-1 and TNF-α. These results suggest that the EtOAc plays a modulatory role in the inflammatory response. The chromatographic method can be used for the analysis of the phenolic compounds of the EtOAc phase.

Development and validation of an UHPLC method for the determination of betamethasone valerate in cream, gel, ointment and lotion.

An ultra high performance liquid chromatographic method has been developed and validated for the determination of betamethasone valerate (BMV) in topical dermatologic formulations. For the development of the method, response surface methodology based on a three-level full factorial design was used. The eluent composition, the column dimension and the flow rate were chosen as relevant experimental parameters to investigate. The response surface plots revealed an optimum separation by using a RP column (30 mm × 2 mm i.d., 2.2 µm particle size), at 30 °C; isocratic mobile phase consisting of acetonitrile:water (60:40) at a flow rate of 0.2 mL min(-1) and a wavelength set at 254 nm. The proposed method was validated for four types of matrices according to ICH guidelines requirements. Dexamethasone acetate (DMA) was used as internal standard. Linearity was studied in the range of 5-200 µg mL(-1) for BMV in spiked matrix samples. Recoveries were in the range of 95-105% and precision was better than 5% for both analytes, either in cream, gel, ointment, or lotion formulations, when using simple sample preparation. Retention times were 0.95 min for DMA and 1.40 min for BMV, demonstrating a short method run time. The method was successfully applied for routine analysis of dermatological formulations containing betamethasone valerate.

Development and validation of an HPLC method for the simultaneous determination of artesunate and mefloquine hydrochloride in fixed-dose combination tablets

The present study developed and validated an HPLC method for the simultaneous determination of artesunate (AS) and mefloquine hydrochloride (MQ) in fixed-dose combination tablets, according to ICH guidelines. The chromatographic separation was carried out on an XBridge C18 (250 x 4.6 mm i.d., 5 µm particle size, Waters) analytical column. The mobile phase included a 0.05 M monobasic potassium phosphate buffer (pH adjusted to 3.0 with phosphoric acid) and acetonitrile (50 + 50, v/v). The flow rate was 1.0 mL/min, and the run time was 13 minutes. A dual-wavelength approach was employed: AS detection was performed at 210 nm and MQ was detected at 283 nm, using a diode array detector. Stability of sample solutions was evaluated for 8 hours after preparation, during which time the solutions remained stable. Youden's test was employed to evaluate robustness. The method proved to be linear (r²>0.99), precise (RSD<2.0%), accurate, selective, and robust, proving to be appropriate for routine drug quality control analysis.

Um método por cromatografia a líquido de alta eficiência para a determinação simultânea de artesunato (AS) e cloridrato de mefloquina (MQ) em comprimidos em dose fixa combinada foi desenvolvido e validado, de acordo com as normas do ICH. A separação cromatográfica foi realizada com uma coluna analítica XBridge C18 (250 x 4,6 mm d.i., partículas de 5 µm, Waters). A fase móvel foi constituída de tampão fosfato monobásico de potássio 0,05 M (pH ajustado para 3,0 com ácido fosfórico) e acetonitrila (50 + 50, v/v). O fluxo da fase móvel foi de 1,0 mL/min e o tempo de corrida foi de 13 minutos. Utilizaram-se dois comprimentos de onda: a detecção do AS foi realizada em 210 nm e a de MQ foi realizada em 283 nm, utilizando-se um detector de arranjo de diodos. A estabilidade das soluções padrão e amostra foi avaliada por 8 horas após sua preparação e as soluções permaneceram estáveis nesse período. O teste de Youden foi empregado para a avaliação da robustez do método. O método se mostrou linear (r²>0,99), preciso (DPR<2,0%), exato, seletivo e robusto, sendo adequado para análises rotineiras de controle de qualidade dos medicamentos.

Quality of essential drugs in tropical countries: evaluation of antimalarial drugs in the Brazilian Health System.

INTRODUCTION: The emergence of drug resistance is one of the main problems concerning malaria treatment. The use of counterfeit and/or substandard antimalarial drugs can contribute to the development of parasite resistance. Thus, the aim of this study was to evaluate the quality of antimalarial drugs distributed in Brazil. METHODS: Samples containing chloroquine phosphate, mefloquine hydrochloride, primaquine phosphate, and quinine sulfate tablets were delivered to the Rio de Janeiro central storeroom (CENADI), state storerooms (SS), and Basic Health Units (BHUs) in the north region of Brazil - a total of 10 sample sets. After 5 months of storage, the samples were collected, and in vitro quality control analyses according to official and published methods were performed. RESULTS: Inadequate drug storage conditions were found in two SS and in all BHUs evaluated. There were no quality deviations found in the chloroquine samples. The quinine samples exhibited weight variation above the allowed limits. The primaquine samples were found to have packaging deficiency. The release of mefloquine in samples from some regions showed a statistically significant difference when compared with the CENADI samples. CONCLUSIONS: It is important to periodically evaluate the quality and storage conditions of essential drugs. The quality deviations found with the primaquine and quinine samples are not related to storage conditions and must be addressed urgently. The decreased mefloquine release from tablets is related to formulation problems or influenced by inadequate storage conditions, prompting further investigation. Even with the mentioned problems, the samples would probably not contribute to resistant parasite selection.

Quality of essential drugs in tropical countries: evaluation of antimalarial drugs in the Brazilian Health System / Qualidade de medicamentos essenciais em países tropicais: avaliação de medicamentos antimaláricos no Sistema de Saúde do Brasil

INTRODUCTION: The emergence of drug resistance is one of the main problems concerning malaria treatment. The use of counterfeit and/or substandard antimalarial drugs can contribute to the development of parasite resistance. Thus, the aim of this study was to evaluate the quality of antimalarial drugs distributed in Brazil. METHODS: Samples containing chloroquine phosphate, mefloquine hydrochloride, primaquine phosphate, and quinine sulfate tablets were delivered to the Rio de Janeiro central storeroom (CENADI), state storerooms (SS), and Basic Health Units (BHUs) in the north region of Brazil - a total of 10 sample sets. After 5 months of storage, the samples were collected, and in vitro quality control analyses according to official and published methods were performed. RESULTS: Inadequate drug storage conditions were found in two SS and in all BHUs evaluated. There were no quality deviations found in the chloroquine samples. The quinine samples exhibited weight variation above the allowed limits. The primaquine samples were found to have packaging deficiency. The release of mefloquine in samples from some regions showed a statistically significant difference when compared with the CENADI samples. CONCLUSIONS: It is important to periodically evaluate the quality and storage conditions of essential drugs. The quality deviations found with the primaquine and quinine samples are not related to storage conditions and must be addressed urgently. The decreased mefloquine release from tablets is related to formulation problems or influenced by inadequate storage conditions, prompting further investigation. Even with the mentioned problems, the samples would probably not contribute to resistant parasite selection.

INTRODUÇÃO: O aparecimento de resistência aos medicamentos é um dos maiores problemas do tratamento da malária. O uso de medicamentos falsos e/ou de má qualidade pode contribuir para o desenvolvimento de resistência no parasita. Este estudo tem por objetivo avaliar a qualidade dos medicamentos antimaláricos distribuídos no Brasil. MÉTODOS: Amostras contendo comprimidos de difosfato de cloroquina, cloridrato de mefloquina, difosfato de primaquina e sulfato de quinina foram enviadas ao almoxarifado central na Cidade do Rio de Janeiro (CENADI), almoxarifados estaduais (SS) e Unidades Básicas de Saúde (UBS) nos estados da região norte do Brasil, totalizando dez amostras. Após cinco meses de armazenamento, as amostras foram coletadas e analisadas segundo métodos oficiais e da literatura. RESULTADOS: Foram encontradas condições inadequadas de armazenamento de medicamentos em duas SS e em todas as UBS avaliadas. Não foram encontrados problemas de qualidade com as amostras de cloroquina. As amostras de quinina apresentaram variação de peso acima dos limites permitidos. Amostras de primaquina foram encontradas com problemas na embalagem. A cedência de mefloquina de comprimidos, em algumas regiões, apresentou diferença estatisticamente significativa quando comparada com a amostra do CENADI. CONCLUSÕES: É importante avaliar, periodicamente, a qualidade e as condições de armazenamento de medicamentos essenciais. Desvios de qualidade encontrados com as amostras de primaquina e quinina não estão relacionados às condições de armazenamento e devem ser corrigidos urgentemente. O decréscimo na cedência de mefloquina dos comprimidos está relacionado com a formulação ou foi influenciada por condições de armazenamento inadequadas, necessitando de uma investigação posterior. Apesar dos problemas mencionados, as amostras provavelmente não contribuiriam para a seleção de parasitas resistentes.

Development and validation of an HPLC method for mefloquine hydrochloride determination in tablet dosage form.

A simple HPLC method for determination of mefloquine hydrochloride in tablets was developed and validated. The separation was carried out on an Xterra RP18 (250 x 4.6 mm id, 5 pm particle size) analytical column. The mobile phase was 0.05 M monobasic potassium phosphate buffer (pH 3.5)-methanol (40 + 60, v/v). The flow rate and wavelength were set to 1 mL/min and 283 nm, respectively. The method was specific for mefloquine hydrochloride in the presence of hydrolytic, oxidative, and photolytic degradation products. It was also linear, precise, accurate, and robust, being suitable for routine QC analyses and stability studies. The developed HPLC method was compared to a previously described spectrophotometric method.

Comparison of HPLC, UV spectrophotometry and potentiometric titration methods for the determination of lumefantrine in pharmaceutical products.

This paper describes the development and evaluation of a HPLC, UV spectrophotometry and potentiometric titration methods to quantify lumefantrine in raw materials and tablets. HPLC analyses were carried out using a Symmetry C(18) column and a mobile phase composed of methanol and 0.05% trifluoroacetic acid (80:20), with a flow rate of 1.0ml/min and UV detection at 335nm. For the spectrophotometric analyses, methanol was used as solvent and the wavelength of 335nm was selected for the detection. Non-aqueous titration of lumefantrine was carried out using perchloric acid as titrant and glacial acetic acid/acetic anhydride as solvent. The end point was potentiometrically determined. The three evaluated methods showed to be adequate to quantify lumefantrine in raw materials, while HPLC and UV methods presented the most reliable results for the analyses of tablets.