Effect of microbial and chemical additives on the fermentation and aerobic stability of alfalfa silage ensiled at 2 dry matters and subjected to air stress during storage.

We evaluated the effects of different types of additives on the fermentation and aerobic stability of alfalfa (Medicago sativa) ensiled at 2 dry matters (DM). Alfalfa was untreated (CTRL) or treated with sodium benzoate, potassium sorbate, and sodium nitrite (SFE), or microbial inoculants (Lactobacillus plantarum MTD1 [LP] or L. buchneri 40788 and Pediococcus pentocaseus 12455 [LBPP]) at a moderate (38%) and high (46%) DM using a completely randomized design with a 2 × 4 factorial arrangement of treatments. High DM silage was higher (P < 0.01) in pH, had less lactic and acetic acid (P < 0.01) and had more yeasts (P < 0.05) and molds (P < 0.01) than moderate DM silage. Recovery of DM declined (P < 0.01) for CTRL and LP treated silages with increasing DM but was not different between LBPP and SFE treatments. Compared to CTRL, LBPP had a lower (P < 0.01) DM recovery at the moderate DM, but SFE had the greatest (P < 0.01) recovery of all treatments at the high DM. Treatment with LBPP increased (P < 0.05) the concentrations of acetic acid and 1,2 propanediol (PD) compared with other treatments (P < 0.01). Numerically, fewer yeasts were found in additive treated silages compared with CTRL, but they were statistically (P < 0.01) lower only when treated with SFE. Treatment with LP resulted in a small improvement in aerobic stability at the moderate but not high DM. In contrast, treatment with SFE and LBPP markedly improved (P < 0.01) the aerobic stability of alfalfa silage at both DM. Whereas SFE and LBPP were similar in their improvements in aerobic stability at the DM, LBPP was better (P < 0.01) than SFE at the high DM. A higher (P < 0.01) concentration of acetic acid in LBPP compared with other treatments was most likely responsible for better stability. This study showed that LBPP and SFE resulted in increases in the aerobic stability of alfalfa silage and it is the first study showing SFE, can markedly improve the aerobic stability of alfalfa silage.

Chemical composition, fermentative losses, and microbial counts of total mixed ration silages inoculated with different Lactobacillus species.

The objective of this study was to evaluate the effects of Lactobacillus inoculants on fermentation, losses, and aerobic stability of a total mixed ration (TMR) silage. A TMR, formulated to meet the requirements of dairy cows producing 25 kg of milk/d, was applied with the following treatments prior to ensiling: 1) Control (CON), 2) Lactobacillus buchneri (105 cfu/g of fresh forage; LB), and 3) Lactobacillus plantarum (105 cfu/g of fresh forage; LP). TMR silages were ensiled for 15 and 60 d in silos equipped with an apparatus for determination of gravimetric DM, gas, and effluent losses. The experiment was performed in a complete randomized design with a 3 × 2 factorial arrangement of the treatments, with 5 replicates per treatment. Chemical changes, microbial counts, fermentation profile, and aerobic stability were measured after opening the silos. Data were submitted to ANOVA, and means were compared by Tukey and T-test and statistical significance was declared at P ≤ 0.05. After 15 d of ensiling, the inclusion of inoculant decreased NDF (P < 0.05) and butyric acid concentrations (P < 0.05) in TMR. LP had the lowest aerobic stability (P < 0.05) and the greatest loss of DM (P < 0.03). Ensiling for 60 d increased ammonia nitrogen (NH3-N), lactic acid bacteria (LAB), aerobic stability, and concentrations of lactic and acetic acid (P < 0.01) and lowered (P < 0.02) total fermentation losses compared to 15 d across all treatments. After 60 d of ensiling, LP lowered pH to the greatest extent. Treatment had no effect on concentrations of DM, CP, ADF, ash, and EE, as well as in vitro DM digestibility. In conclusion, inoculants containing LP or LB did not improve fermentation profile, did not prolong the aerobic stability, nor reduced losses. Furthermore, the 15-d ensiling period was insufficient for adequate bacterial activity.

Effects of holes in plastic film on the storage losses in total mixed ration silage in round bales.

The ensilage of total mixed ration (TMR) is a technology designed to help farmers with limitations to provide a balanced diet for their herds. Our aim was to evaluate the conservation of TMR ensiled in round bales with or without holes in the wrapping plastic film. Eight round bales of a corn silage-based TMR of 1,000 kg (370 kg DM/m3) were prepared. Ten days (d) after ensiling, four bales were randomly punctured with two holes of 25 cm2 each in opposite sides of the bale. The temperature in the center of the bales was recorded during the storage using dataloggers. After 60 d of storage, bales were weighted to assess dry matter (DM) recovery. Silages were sampled for measuring DM content, chemical composition, pH, lactic acid, and microbial counts. The temperature of the sliced bale face was assessed by infrared thermography. The holes in the plastic affected the DM content, DM recovery, and pH, whereas lactic acid, microbial counts, and temperature were not affected by treatments. The holes in the sealing plastic film should be avoided. However, holes of 25 cm2 each were not capable of causing expressive losses in TMR silage stored in 1,000 kg bales.