ABSTRACT
BACKGROUND: Exhaled nitric oxide is helpful in the diagnosis of the inflammation process. The study aimed to analyze the impact of the COVID-19 disease on the oral bacterial flora of patients using complete dentures with a diagnostic device that measures the level of NO in exhaled air. MATERIALS AND METHODS: The study included patients using upper and lower acrylic complete dentures. All patients participating in the study were vaccinated against COVID-19. The patients were divided into two groups. A dental examination was conducted in each group. The NO concentration was measured using the Vivatmo Pro device. An oral microbiological examination was performed by taking a swab from the bottom of the mouth. RESULTS: There were no statistically significant differences in the distribution of NO in relation to the number of bacteria from isolated families in the study and control groups and no statistically significant correlations between the level of NO and the number of bacteria from all families in the control and study group. Significantly higher NO values were present in the vaccinated and COVID-19-positive history population compared to the vaccinated and with no COVID-19 history population (patients with no clinical symptoms of infection or unaware they had COVID-19). CONCLUSIONS: There are statistically significant differences in NO distribution in the considered populations: vaccinated and sick, and vaccinated and with a negative history of COVID-19. The measurement of NO in exhaled air can be a complementary, non-invasive diagnostic and inflammation monitoring method.
ABSTRACT
Hoard finds from the Bronze Age have appeared all over Europe, prompting questions about their functions (either as raw materials for recycling or votive objects). The hoard trove of raw materials from Przybyslaw in Greater Poland is an interesting example of a discovery that is related to the foundry activities of Late Bronze Age and Early Iron Age communities (c. 600 BC). The deposit consists of fragments of raw materials that were damaged end products intended for smelting. The research included the characterisation of the material in terms of the variety of the raw materials that were used. The individual elements of the hoard were characterised in terms of their chemical compositions, microstructures, and properties. A range of modern instrumental research methods were used: metallographic macroscopic and microscopic observations by optical microscopy (OM), scanning electron microscopy (SEM), chemical-composition analysis by X-ray fluorescence spectroscopy (ED-XRF), X-ray microanalysis (EDS), and detailed crystallisation analysis by electron microscopy with an emphasis on electron backscatter diffraction (EBSD). As part of this study, model alloys were also prepared for two of the selected chemical compositions, (i.e., CuPbSn and CuPb). These alloys were analysed for their mechanical and technological properties. This research of the hoard from Przybyslaw (Jarocin district, Greater Poland) has contributed to the recognition and interpretation of the function and nature of the hoard by using modern research and modelling methods as a cultic raw material deposit.
ABSTRACT
This study aimed to evaluate the effect of introducing structural modification of ibuprofen in the form of an ion pair on the permeability of ibuprofen through the skin and the properties of the adhesive layer of the medical patch produced. The active substances tested were the salts of ibuprofen obtained by pairing the anion of ibuprofen with organic cations such as propyl esters of amino acids such as tyrosine, tryptophan, histidine, or phenylalanine. For comparison, the penetration of unmodified ibuprofen and commercially available patches was also tested. Acrylate copolymers based on isobornyl methacrylate as a biocomponent and a monomer increasing the T g ("hard") were used to produce the adhesive layer of transdermal patches. The obtained patches were characterized in terms of adhesive properties and tested for the permeability of the active ingredient and the permeability of the active ingredient through the skin. This study demonstrates the possibility of developing acrylic-based photoreactive transdermal patches that contain biocomponents that can deliver a therapeutically appropriate dose of ibuprofen.
ABSTRACT
In this paper, the results from studies regarding near-eutectic Al-Si alloys with Sn as an alloying addition are presented. In most Al-Si alloys, tin is regarded as a contaminant; thus, its amount is limited to up to 0.3 wt.%. The few studies that can be found in the literature regarding the behaviour of tin in aluminium alloys suggest the beneficial effect of this element on selected properties. However, these results were obtained for hypereutectic Al-Si alloys or wrought aluminium alloys. In our studies, the influence of tin contents of up to 1.7 wt.% was determined on the AlSi10 alloy. Thermal analysis, measurements of the mechanical properties of the cast and heat-treated alloy, metallographic observations (light microscopy, scanning electron microscopy), and EDS (X-ray energy dispersive spectrometry) measurement allowed us to fully describe the effect of tin on the aluminium alloy. The results of the thermal analysis showed changes in the range of the α-Al solution crystallisation and the α+ß eutectic through a decrease in the alloy's solidification start point and eutectic solidification point. As a result, the elongation of the alloy was more than double in the AlSi10Sn1.7 alloy, with an A5 value of 8.1% and a tensile strength that was above 200 MPa.
ABSTRACT
This study aimed to evaluate the effect of chemical modifications of the structure of active compounds on the skin permeation and accumulation of ibuprofen [IBU] from the acrylic pressure-sensitive adhesive used as a drug-in-adhesives matrix type transdermal patch. The active substances tested were ibuprofen salts obtained by pairing the ibuprofen anion with organic cations, such as amino acid isopropyl esters. The structural modification of ibuprofen tested were Ibuprofen sodium salt, [GlyOiPr][IBU], [AlaOiPr][IBU], [ValOiPr][IBU], [SerOiPr][IBU], [ThrOiPr][IBU], [(AspOiPr)2][IBU], [LysOiPr][IBU], [LysOiPr][IBU]2, [PheOiPr][IBU], and [ProOiPr][IBU]. For comparison, the penetration of unmodified ibuprofen and commercially available patches was also investigated. Thus, twelve transdermal patches with new drug modifications have been developed whose adhesive carrier is an acrylate copolymer. The obtained patches were characterized for their adhesive properties and tested for permeability of the active substance. Our results show that the obtained ibuprofen patches demonstrate similar permeability to commercial patches compared to those with structural modifications of ibuprofen. However, these modified patches show an increased drug permeability of 2.3 to even 6.4 times greater than unmodified ibuprofen. Increasing the permeability of the active substance and properties such as adhesion, cohesion, and tack make the obtained patches an excellent alternative to commercial patches containing ibuprofen.
Subject(s)
Ibuprofen , Transdermal Patch , Adhesives/chemistry , Administration, Cutaneous , Ibuprofen/chemistry , Polymers/chemistry , Skin/metabolismABSTRACT
The measurement of nitric oxide (NO) in exhaled air is used in diagnostics and monitoring the pathologies not only in the respiratory system but also in the oral cavity. It has shown a huge increase in its level in asthma and diseases of the oral cavity. It seems reasonable to undertake research on the impact of inflammation on the level of NO in exhaled air. The aim of the study is to make an evidence-based review of the application of NO levels in exhaled air in the diagnosis of inflammation and treatment monitoring on the basis of selected measuring devices. METHODS AND RESULTS: This paper presents an example of the application of NO measurement in exhaled air in individual human systems. Selected measuring devices, their non-invasiveness, and their advantages are described. DISCUSSION: The usefulness of this diagnostic method in pathologies of the oral cavity was noted. CONCLUSIONS: Measuring the level of NO in exhaled air seems to be a useful diagnostic method.
Subject(s)
Asthma , Nitric Oxide , Asthma/diagnosis , Asthma/therapy , Exhalation , Humans , Inflammation/diagnosis , Respiratory SystemABSTRACT
BACKGROUND: The most common cause of implant loss and deteriorating restoration aesthetics is infection and chronic inflammation of the tissues around the implants. Inflammation in the oral cavity, confirmed by clinical and histopathological examination and determination of exhaled nitric oxide, is a situation which may cause the complications on the whole human body. Elimination of the patology in the oral cavity in some cases is the only resonable treatment. The aims and objectives of our work is to present a gradual treatment of advanced infalmmation and present huge reduction stamp of inflammation measured with marker nitric oxide (NO) in exhaled air. MATERIALS AND METHODS: Simple treatment containing elimantion of pathology in the oral cavity was conducted. Patient that came to the dental practice suffered from the inflammation caused by lack of proper hygiene. First aid in this situation was to eliminate the inflammation which may affect negatively for general health. At first visit full hygienization was performed, at the second visit roots of abutment teeth and implants were removed under local anesthesia along with cystic changes. RESULTS: The hygiene precedures and extraction of the unsteady inflammationprosthetic restorations significantly decreased the level of NO in exhaled air. CONCLUSIONS: During the examination of the patient coming to the dental practice great attention should be paid to the coexistence of pathologies related to the oral cavity. Omission of a dental examination and possible elimination of odontogenic foci may affect the implication of the results of general diagnostics and subsequent treatment. Measuring the level of NO on exhaled air seems to be useful diagnostic method.
ABSTRACT
Research related to the development of a dental infiltrant for minimally invasive treatment of initial caries of hard dental tissues is presented. The formulation of the developed infiltrant material includes typical methacrylate monomers used in dentistry, an author's adhesion monomer containing metronidazole, a photoinitiating system and yttrium trifluoride (YF3). The main objective of the study was to evaluate penetration into decalcified root cementum using scanning electron microscope of an experimental preparation with the characteristics of a dental infiltrant compared to a commercial preparation with the addition of YF3 as a contrast agent. Microscopic observations showed that YF3 particles virtually did not penetrate deep into the root cementum-this was mainly due to the particle size of YF3. Observations of cementum and root dentin tissue infiltration: resin tissue infiltration was visible to a depth of about 80 to 120 µm without the use of a tracer, which, due to agglomeration and particle size, remained on the cementum surface or in the resin used for inlaying. There were no differences between the degree of penetration of an experimental preparation with the characteristics of a dental infiltrant, as compared to a commercial preparation.
ABSTRACT
This study assesses the value of the CXCR3 ligands CXCL9/MIG, CXCL10/IP-10 and CXCL11/I-TAC when used to supplement the standard infection markers C-reactive protein (CRP) and procalcitonin (PCT) in the diagnostic algorithm of neutropenic fever in children with cancer. The concentration of CRP, PCT and chemokines was determined during the first hour of fever and 12-24 h afterwards in pediatric oncology patients with neutropenia. Among 100 consecutive febrile episodes in neutropenic patients, 34 cases demonstrated fever of unknown origin (FUO) (group A), 47 demonstrated mild clinically or microbiologically proven infection (Group B) and 19 severe infection (Group C). Significantly higher PCT-1 levels were found in group C (0.24 ng/mL) vs. group A (0.16 ng/mL), and PCT-2 in group C (1.2 ng/mL) vs. A (0.17 ng/mL), and in C vs. B (0.2 ng/mL). Chemokine concentrations (I-TAC-1, IP-10-1, IP-10-2) were significantly lower in Group A vs. B+C; I-TAC 1: 48.64 vs. 70.99 pg/mL, p = 0.03; IP-10 1: 59.95 vs. 96.84 pg/mL, p = 0.04; and IP-10 2: 102.40 vs. 149.39 pg/mL, p = 0.05. The selected pro-inflammatory chemokines I-TAC and IP10 might help to distinguish cancer patients with febrile neutropenia with the highest risk of infection. Although procalcitonin could serve as a marker of a high risk of infection, its delayed response diminishes its usefulness.
ABSTRACT
The aim of this work is a review of recent scientific literature about intra-oral halitosis among patients using dentures. Halitosis is a condition in which an unpleasant smell comes out of the oral cavity, which is caused mainly by volatile sulfur and non-sulfured compounds. The etiology of halitosis may be intra- or extra-oral; in most patients, however, it is due to the activity of microorganisms in the oral cavity. The problem of the occurrence of intra-oral halitosis has accompanied patients for many years. In dental prosthetics, the problem of halitosis occurs in patients using removable or fixed dentures. In both cases, new niches for the development of microorganisms may be created, including those related to intra-oral halitosis. It should be noted that dentures-both fixed and removable-are a foreign body placed in the patient's oral cavity which, in case of insufficient hygiene, may constitute a reservoir of microorganisms, causing this unpleasant condition. Conventional treatment of intraoral halitosis reduces microbial activity via chemical and/or mechanical action. Currently, the search for new strategies in the treatment of halitosis is in progress. One idea is to use photodynamic therapy, while another is to modify poly(methyl methacrylate) (PMMA) with silver and graphene nanoparticles. Additionally, attempts have been made to combine those two methods. Another unconventional method of treating halitosis is the use of probiotics.
ABSTRACT
The use of ultraviolet radiation (UV) technology for the crosslinking of acrylic pressure-sensitive adhesives (PSA) is the one of various crosslinking methods, being the alternative to the conventional crosslinking process of solvent-based acrylic systems. It also requires a photoinitiator to absorb the impinging UV and induce photocrosslinking. As previously mentioned, a photoinitiator is one of the important and necessary components in UV-inducted crosslinking of acrylic pressure-sensitive adhesives. The activity of multifunctional conventional saturated photoinitiators of type I and type II, especially benzophenone-based in the photoreactive UV-crosslinkable acrylic PSA was described. The effect of the multifunctional type-II photoinitiators on the acrylic PSA, such as tack, peel adhesion and shear strength were summarized.
ABSTRACT
Due to long-term problems related to environmental protection, economic aspects, and waste management in the chemical industry, it is justified to develop renewable polymers as an alternative to synthetic polymers. Two kinds of acrylic bio-renewable components were used for the modification of acrylated epoxidized soybean oil (AESO). The bio-based compositions used as photocurable binders to obtain the photocurable coatings with satisfactory properties and high bio content were then prepared. The kinetic of curing reaction of the oligomers and monomers towards radical photopolymerization and the properties of the cured coatings were fully investigated; the results are discussed in relation with the compounds' structures. Important information about how to design and obtain renewable photocurable coatings with satisfactory properties was provided in this study. In this study, AESO resin was modified with renewable oligomer or (math)acrylate monomer to increase the reactivity and reduce the viscosity of the photoreactive system in order to obtain renewable and viable alternatives to petroleum-based polymeric materials with perfect film-forming properties. It turned out that both photopolymerization rate and hardness of cured coatings were increased significantly with the addition of modifiers; the use of a thiol modifier and change of the photoinitiator concentration allowed to improve the adhesion, hardness, and control of the photo-curing process.
ABSTRACT
The popularity of using the photopolymerization reactions in various areas of science and technique is constantly gaining importance. Light-induced photopolymerization is the basic process for the production of various polymeric materials. The key role in the polymerization reaction is the photoinitiator. The huge demand for radical and cationic initiators results from the dynamic development of the medical sector, and the optoelectronic, paints, coatings, varnishes and adhesives industries. For this reason, we dealt with the subject of designing new, highly-efficient radical photoinitiators. This paper describes novel photoinitiating systems operating in UV-Vis light for radical polymerization of acrylates. The proposed photoinitiators are composed of squaraine (SQ) as a light absorber and various diphenyliodonium (Iod) salts as co-initiators. The kinetic parameters of radical polymerization of trimethylolpropane triacrylate (TMPTA), such as the degree of double bonds conversion (C%), the rate of photopolymerization (Rp), as well as the photoinitiation index (Ip) were calculated. It was found that 2-aminobenzothiazole derivatives in the presence of iodonium salts effectively initiated the polymerization of TMPTA. The rates of polymerization were at about 2 × 10-2 s-1 and the degree of conversion of acrylate groups from 10% to 36% were observed. The values of the photoinitiating indexes for the most optimal initiator concentration, i.e., 5 × 10-3 M were in the range from 1 × 10-3 s-2 even to above 9 × 10-3 s-2. The photoinitiating efficiency of new radical initiators depends on the concentration and chemical structure of used photoinitiator. The role of squaraine-based photoinitiating systems as effective dyeing photoinitiators for radical polymerization is highlighted in this article.
ABSTRACT
This study aimed to investigate the potential of photoreactive acrylate patches as systems for transdermal drug delivery, in particular, using more renewable alternatives and more environmentally friendly synthesis routes of transdermal patches. Therefore, the aim of this study was to develop a transdermal patch containing ibuprofen and investigate its performance in vitro through the pigskin. Transparent patches were prepared using four acrylate copolymers with an incorporated photoinitiator. Two types of transdermal patches based on the photocrosslinking acrylic prepolymers with isobornyl methacrylate as biocomponent and monomer increasing Tg ("hard") were manufactured. The obtained patches were characterized for their adhesive properties and tested for permeability of the active substance. It turns out that patches whose adhesive matrix is photoreactive polyacrylate copolymers have a higher cohesion than patches from commercial adhesives, while the modification of the copolymers with isobornyl methacrylate resulted in an improvement in adhesion and tack. This study demonstrates the feasibility of developing photoreactive acrylic-based transdermal patches that contain biocomponents that can deliver a therapeutically relevant dose of ibuprofen.
Subject(s)
Acrylic Resins/chemistry , Adhesives/chemistry , Ultraviolet RaysABSTRACT
Abrasions and pressure ulcers on the oral mucosa are most often caused by excessive pressure or incorrect fitting of the denture. The use of soft relining materials can eliminate pain sensations and improve patient comfort. The main functional feature of soft elastomeric materials is the ability to discharge loads from the tissues of the mucosa. (1) Background: The aim of the work was a comparative laboratory study of ten materials used for the soft lining of acrylic dentures. (2) Methods: There were materials based on acrylates (Vertex Soft, Villacryl Soft, Flexacryl Soft) and silicones (Sofreliner Tough Medium, Sofreliner Tough Medium, Ufi Gel SC, GC Reline Soft, Elite Soft Relining, Molloplast). Laboratory tests include the analysis of the tensile bond strength between the relining material and the acrylic plate of the prosthesis. The tests were conducted taking into account 90-day term aging in the distilled water environment based on the methodology presented in the European Standard ISO 10139-2. (3) Results: After three months of observation, the highest strength of the joint was characterized by Flexacryl Soft acrylic, for which the average value was 2.5 MPa. The lowest average value of 0.89 MPa was recorded for the GC Reline Soft silicone material. Over time, an increase in the value of the strength of the combination of acrylic materials and a decrease in these values in the case of silicone materials was observed. (4) Conclusion: Each of the tested silicone materials showed all three types of damage, from adhesive to mixed to cohesive. All acrylic-based materials showed an adhesive type of failure. Time did not affect the type of destruction.
ABSTRACT
Infiltration is a method of penetration with a low viscosity resin that penetrates deep into demineralised tooth tissue and fills the intergranular spaces, hence reducing porosity. Carious lesions initially located at the enamel-cement junction are usually found in elderly patients. Those spots are predisposed to bacterial adhesion originating both from biofilm and from gingival pocket bacteria. The aim of this study was to evaluate the penetration of an experimental preparation, which has the characteristics of a dental infiltrant, enriched with an antibacterial component, into the decalcified root cement tissues of extracted human teeth in elderly patients. An experimental preparation with the characteristics of a dental infiltrant was prepared, applied, and polymerised on the surface of extracted, previously decalcified human teeth. The control sample was Icon (DMG, Hamburg, Germany). The ability of the preparations to penetrate deep into the root cement was evaluated using scanning electron and light microscopy. The study showed that an experimental preparation could potentially be used for treatment of early carious lesions within the tooth root in elderly patients, among others, as it penetrates deep into demineralised tissues. More research is needed.
ABSTRACT
Investigations are conducted in order to maintain or to improve the selected properties of the group of foundry copper-tin alloys with nickel and titanium additions, at a limited fraction of the critical (deficit) element such as tin. The crystallisation process, as well as changes of the microstructure and selected mechanical properties of the CuSn8 alloy-occurring due to introducing alloying additions-were analysed. Investigations of the macro and microstructure were performed using optical and scanning electron microscopy. Based on the thermal analysis and thermodynamic modelling using the CALPHAD (CALculations of PHAse Diagrams) method, the crystallisation process was analysed. The identification of phases was performed by XRD (X-ray diffraction). In addition, such parameters as tensile strength-UTS, elongation-A and hardness-HBS were tested. Under the influence of the introduced titanium, the columnar crystals are reduced due to the crystallisation of the alloy at the walls of the mould. Precipitations (intermetallic phases) crystallize first (primary). The intermetallic phases associated with the presence of the alloying elements nickel and titanium are located in the interdendritic regions. In tin bronzes with titanium additions, hardness (HBS) increases, tensile strength (UTS) negligibly decreases, while elongation (A) significantly decreases. In the case of CuSnNi bronze, the addition of 0.2 wt.% Ti increases the hardness and increases ultimate tensile strength (UTS), while reducing the elongation (A). Higher Ti additions increase HBS, slightly decrease the tensile strength, and significantly reduce the elongation.
ABSTRACT
The main functional feature of elastomeric soft linings materials is the ability to discharge loads in the tissues of the mucosa. As a result, there are fewer injuries to the mucosa and chewing ability increases. In addition, these prostheses are more comfortable in the patient's opinion. To obtain the equal distribution of forces on the muco-bone basis and to reduce the traumatizing effect of the denture plate for patients using full dentures, soft lining materials can be used. AIM OF THE STUDY: the aim of the work was a comparative laboratory study of ten materials used for soft lining of acrylic complete dentures. METHODOLOGY: Materials based on acrylates (Vertex Soft, Villacryl Soft, Flexacryl Soft) and on silicones (Sofreliner Tough Medium, Sofreliner Tough Medium, Ufi Gel SC, GC Reline Soft, Elite Soft Relining, Molloplast) were compared. Laboratory tests include tests of changes in Shore'a A hardness of soft lining material. The tests were conducted taking into account 90 day term aging in the distilled water environment based on the methodology presented in the European Standard ISO 10139-2. RESULTS: For most silicone materials, only small changes in hardness were found in the range of 0.7 (Ufi Gel SC) to 3.3 (Sofreliner Tough Medium) on the Shore A scale. The exception was GC Reline Soft, for which a marked increase in hardness was noted. All materials based on acrylates were characterized by successive increase in hardness over time. However, in the case of the Vertex Soft material, the increase in hardness was relatively small (5.5 ShA).
Subject(s)
Denture Liners , Hardness , Humans , Materials TestingABSTRACT
In this work, epoxy acrylate resin (EA) based on the industrial-grade bisphenol A-based epoxy resin (Ep6) and acrylic acid (AA) has been synthesized in order to develop hybrid resin comprising both epoxide group and reactive, terminal unsaturation. Obtained epoxy acrylate prepolymer was employed to formulate photocurable coating compositions containing, besides the EA binder, also cationic or radical photoinitiators. Hence, when cationic photoinitiators were applied, polyether-type polymer chains with pending acrylate groups were formed. In the case of free radical polymerization, epoxy acrylates certainly formed a polyacrylate backbone with pending epoxy groups. Owing to the presence of both epoxy and double carbon-carbon pendant groups, the reaction product exhibits photocrosslinking via two distinct mechanisms: (i) cationic ring-opening polymerization and (ii) free radical polymerization. Therefore, photopolymerization behavior of synthetized hybrid resin with various photoinitiators was determined via photo-differential scanning calorimetry (photo-DSC) and real-time infrared spectroscopy (RT-IR) methods, and properties of cured coatings were investigated. The performance of the following type of photoinitiators was tested in the cationic photopolymerization: diaryliodonium cations or triarylsulfonium cations, and the following type of photoinitiators were used to induce free radical photopolymerization: α-hydroxyketones, acylphosphine oxides, and their mixtures. Lastly, the basic physicomechanical properties of cured coatings, such as tack-free time, hardness, adhesion, gloss, and yellowness index, were evaluated. Some structural factors and parameters of cationic and radical photoinitiators and photopolymerization mechanisms affecting the epoxy acrylate hybrid coatings performance are discussed.