Effect of Salts on Laccase-Catalyzed Polymerization of Lignosulfonate.

Enzymatic polymerization of lignosulfonate (LS) has a high potential for various applications ranging from coatings to adhesives. Here, the effect of different ions in low concentrations on enzymatic polymerization of LS was investigated, including salt solutions consisting of mono- and dicarboxylic acids, sulfate, phosphate and chloride with sodium as counter ion. LS polymerization was followed by viscometry and size exclusion (SEC) chromatography. Interestingly, there was only a small effect of ions on the activity of the laccase on standard substrate ABTS, while the effect on polymerization of LS was substantially different. The presence of acetate led to a 39 % higher degree of polymerization (DP) for LS. Small angle X-ray scattering (SAXS) revealed that the structure of the enzyme was largely unaffected by the ions, while the determination of the zeta potential showed that those ions conveying higher negative surface charges onto LS particles showed lower DPs, than those not affecting the surface charge. Further, electron paramagnetic resonance (EPR) spectroscopy showed 5-times higher intensity in phenoxyl radicals for the monovalent ions compared to the divalent ones. It was concluded that the DPs of LS could be tuned in the presence of certain ions, by facilitating the interaction between the laccase substrate-binding site and the LS molecules.

Editorial on the Special Issue "Chitosan Functional Hydrogels: Synthesis and Applications".

Chitin, a polysaccharide composed of ß-(1-4)-linked 2-deoxy-2-acetamido-d-glucose units, is found in cell walls of different organisms, including crustaceans, fungi, insects, some algae, microorganisms, and some invertebrate animals, and its deacetylation into chitosan confers it with incredible chemical versatility allowing it to be processed into numerous products [...].

Improving Properties of Starch-Based Adhesives with Carboxylic Acids and Enzymatically Polymerized Lignosulfonates.

A novel strategy for improving wet resistance and bonding properties of starch-based adhesives using enzymatically polymerized lignosulfonates and carboxylic acids as additives was developed. Therefore, lignosulfonates were polymerized by laccase to a molecular weight of 750 kDa. Incorporation of low concentrations (up to 1% of the starch weight) of 1,2,3,4-butanetetracarboxylic acid (BTCA) led to further improvement on the properties of the adhesives, while addition of greater amounts of BTCA led to a decrease in the properties measured due to large viscosity increases. Great improvements in wet-resistance from 22 to 60 min and bonding times (from 30 to 20 s) were observed for an adhesive containing 8% enzymatically polymerized lignin and 1% BTCA. On the other hand, the addition of citric acid (CA) deteriorated the properties of the adhesives, especially when lignosulfonate was present. In conclusion, this study shows that the addition of the appropriate amount of enzymatically polymerized lignosulfonates together with carboxylic acids (namely BTCA) to starch-based adhesives is a robust strategy for improving their wet resistance and bonding times.

Enzymatic synthesis of wet-resistant lignosulfonate-starch adhesives.

This work describes a new method for improving the properties, mainly the wet-resistance, of starch-based adhesives using enzymatically polymerized lignosulfonates. A correlation of viscosity with molecular weight was found, allowing simple control of enzymatic polymerization of lignosulfonates. Incorporation of lignosulfonates polymerized from 29 kDa to > 4500 kDa using laccase led to a considerable increase in wet-resistance (from 15 to 20 min for the laminating glue and from 150 to 1200 min for the bag glue) while not affecting (for the laminating glue) or even improving the bonding time (from 80 to 60 s for the bag glue). Finally, the effect of active laccase in the final adhesive was investigated by enzymatic inactivation using NaN3 before formulation of the glue, as well as by extra laccase addition. In conclusion, this study shows that enzymatically polymerized lignosulfonate is a robust strategy for improving wet resistance of starch-based adhesives.

Enzymatic Conversion of Lignosulfonate into Wood Adhesives: A Next Step towards Fully Biobased Composite Materials.

This study investigates the effect of the enzymatic polymerization of lignosulfonate for the formulation of a lignosulfonate-based adhesive. For this, beech lamellas were glued together and tested according to the EN 302-1 standard. The results showed that the laccase-polymerized lignosulfonate-based wood adhesives (LS-p) had similar mechanical properties as a standard carpenter's glue (PVAc-based D3 class white glue), as no significant difference in tensile shear strength between these two adhesive types was found. However, carpenter's glue showed almost 100% wood failure, while with the lignosulfonate-based wood glue, the samples failed, mainly in the glueline. Pre-polymerization of LS-p is the most critical factor to achieve the required viscosity, which is also connected to the wetting properties and the resulting tensile shear strength. The longer the pre-polymerization, the higher the viscosity of the LS-p adhesive, with the tensile shear strength reaching a plateau. The presented data show the potential of using enzymatically pre-polymerized lignosulfonate as a well-performing wood adhesive. Further development and optimization of the pre-polymerization process is required, which is also important to push towards upscaling and practical applications.

Oxidation of Various Kraft Lignins with a Bacterial Laccase Enzyme.

Modification of kraft lignin (KL), traditionally uses harsh and energy-demanding physical and chemical processes. In this study, the potential of the bacterial laccase CotA (spore coating protein A) for oxidation of KL under mild conditions was assessed. Thereby, the efficiency of CotA to oxidize both softwood and hardwood KL of varying purity at alkaline conditions was examined. For the respective type of wood, the highest oxidation activity by CotA was determined for the medium ash content softwood KL (MA_S) and the medium ash content hardwood KL (MA_H), respectively. By an up to 95% decrease in fluorescence and up to 65% in phenol content coupling of the structural lignin units was indicated. These results correlated with an increase in viscosity and molecular weight, which increased nearly 2 and 20-fold for MA_H and about 1.3 and 6.0-fold for MA_S, respectively. Thus, this study confirms that the CotA laccase can oxidize a variety of KL at alkaline conditions, while the origin and purity of KL were found to have a major impact on the efficiency of oxidation. Under the herein tested conditions, it was observed that the MA_H KL showed the highest susceptibility to CotA oxidation when compared to the other hardwood KLs and the softwood KLs. Therefore, this could be a viable method to produce sustainable resins and adhesives.

Enzyme Catalyzed Copolymerization of Lignosulfonates for Hydrophobic Coatings.

Enzymatic polymerization of lignin can generate a variety of value-added products concomitantly replacing fossil-based resources. In line with this approach, a laccase from the thermophilic fungus Myceliophthora thermophila (MtL) was used to couple a hydrophobicity enhancing fluorophenol (FP) molecule, namely 4-[4-(trifluoromethyl)phenoxy]phenol (4,4-F3MPP), as a model substrate onto lignosulfonate (LS). During the coupling reaction changes in fluorescence, phenol content, viscosity and molecular weight (size exclusion chromatography; SEC) were monitored. The effects of enzymatic coupling of FP onto LS on hydrophobicity were investigated by the means of water contact angle (WCA) measurement and determination of swelling capacity. Full polymerization of LS resulting in the production of water-insoluble polymers was achieved at a pH of 7 and 33°C. Incorporation of 2% (w/v) of FP led to an increase in WCA by 59.2% while the swelling capacity showed a decrease by 216.8%. Further, Fourier transform infrared spectroscopy (FTIR) and X-ray photoelectron spectroscopy (XPS) analysis indicated successful covalent coupling of the FP molecule onto LS by an emerging peak at 1,320 cm-1 in the FTIR spectrum and the evidence of Fluor in the XPS spectrum. This study shows the ability of laccase to mediate the tailoring of LS properties to produce functional polymers.

Biotechnological production and high potential of furan-based renewable monomers and polymers.

Of the 25 million tons of plastic waste produced every year in Europe, 40% of these are not reused or recycled, thus contributing to environmental pollution, one of the major challenges of the 21st century. Most of these plastics are made of petrochemical-derived polymers which are very difficult to degrade and as a result, a lot of research efforts have been made on more environmentally friendly alternatives. Bio-based monomers, derived from renewable raw materials, constitute a possible solution for the replacement of oil-derived monomers, with furan derivatives that emerged as platform molecules having a great potential for the synthesis of biobased polyesters, polyamides and their copolymers. This review article summarizes the latest developments in biotechnological production of furan compounds that can be used in polymer chemistry as well as in their conversion into polymers. Moreover, the biodegradability of the resulting materials is discussed.

A Fungal Ascorbate Oxidase with Unexpected Laccase Activity.

Ascorbate oxidases are an enzyme group that has not been explored to a large extent. So far, mainly ascorbate oxidases from plants and only a few from fungi have been described. Although ascorbate oxidases belong to the well-studied enzyme family of multi-copper oxidases, their function is still unclear. In this study, Af_AO1, an enzyme from the fungus Aspergillus flavus, was characterized. Sequence analyses and copper content determination demonstrated Af_AO1 to belong to the multi-copper oxidase family. Biochemical characterization and 3D-modeling revealed a similarity to ascorbate oxidases, but also to laccases. Af_AO1 had a 10-fold higher affinity to ascorbic acid (KM = 0.16 ± 0.03 mM) than to ABTS (KM = 1.89 ± 0.12 mM). Furthermore, the best fitting 3D-model was based on the ascorbate oxidase from Cucurbita pepo var. melopepo. The laccase-like activity of Af_AO1 on ABTS (Vmax = 11.56 ± 0.15 µM/min/mg) was, however, not negligible. On the other hand, other typical laccase substrates, such as syringaldezine and guaiacol, were not oxidized by Af_AO1. According to the biochemical and structural characterization, Af_AO1 was classified as ascorbate oxidase with unusual, laccase-like activity.

Controlled enzymatic hydrolysis and synthesis of lignin cross-linked chitosan functional hydrogels.

This study presents a novel fully enzymatic process for the controlled depolymerisation of fungal and shrimp chitosan, and their subsequent use in the synthesis of lignin cross-linked chitosan (CTS) hydrogels. Cellobiosehydrolase (CBH) was used to depolymerize CTS resulting in decrease in average molecular weight (Mw) of shrimp CTS from 140 kDa and degree of deacetylation (DD %) from 91.3% to an average MW of 15 kDa and 16% DD. Similarly, fungal chitosan average molecular weight decreased from 92 kDa and the degree of deacetylation (DD) of 48.3% to 12 kDa and a DD of 13%. The depolymerized CTS were completely soluble in water and miscible with lignosulfonates without encountering the usual problem of formation of flocs. Introduction of laccase into a lignosulfonate-chitosan mixture resulted in the oxidation and generation of lignin reactive phenoxyl radicals that cross-linked with CTS-NH2 reactive groups resulting in the increase of Mw from 20 kDa to >500 kDa and viscosity from 20 mPa to >500 mPa. This resulted in the formation of stable lignin-cross-linked hydrogels with elongation at break of 111% and tensile strength of 7 mPa. The produced functional hydrogels have potential application in food and biomedical industries as e.g. as oxygen barriers in packaging or as functional wound dressing or tissue engineering platforms.

Effects of enzymes on the refining of different pulps.

Comparative studies of the effects of two commercial enzyme formulations on fiber refining were conducted. Extensive basic characterisation of the enzymes involved, assessment of their hydrolytic activities on different model substrates as well as on different pulps (softwood sulfate, softwood sulfite, hardwood sulfate) were evaluated. Both enzyme formulations showed endoglucanase as well as some xylanase and ß-glucosidase activity. In addition, Enzyme A reached a CMC end viscosity of 19.5 mPa compared to 11.1 mPa for Enzyme B. Reducing sugar release almost doubled from 695 µmol mL-1 for hardwood sulfate pulp to 1300 µmol mL-1 for softwood sulfite pulp with Enzyme B under the same conditions. Enzyme A increased the degree of refining even under non-ideal conditions from 23 °SR to up to 50 °SR. Further characterization of hand sheets, made from enzyme pre-treated and refined cellulose fibers with Enzyme A and B, showed that Enzyme A had the best effects leading to hand sheets with increased tensile strength and low air permeability. In summary, the increase in the degree of refining seen for Enzyme A correlated to higher xylanase and ß-glucosidase activity and lower endoglucanase activity.

Harnessing the Power of Enzymes for Tailoring and Valorizing Lignin.

Lignin, a structural component of lignocellulosic plants, is an alternative raw material with enormous potential to replace diminishing fossil-based resources for the sustainable production of many chemicals and materials. Unfortunately, lignin's heterogeneity, low reactivity, and strong intra- and intermolecular hydrogen interactions and modifications introduced during the pulping process present significant technical challenges. However, the increasing ability to tailor lignin biosynthesis pathways by targeting enzymes and the continued discovery of more robust biocatalysts are enabling the synthesis of novel valuable products. This review summarizes how enzymes involved in lignin biosynthesis pathways and microbial enzymes are being harnessed to produce chemicals and materials and to upgrade lignin properties for the synthesis of a variety of value-added lignin industrial products.

Lignin-Based Pesticide Delivery System.

The potential of lignosulfonates as widely underutilized byproducts of the pulp and paper industry for the synthesis of a biodegradable pesticide carrier system was assessed in this study. Design of experiment software MODDE Pro was for the first time applied to optimize lignosulfonate granule production using Myceliophthora thermophila laccase as a biocatalyst. Enzymatic cross-linking was monitored using size exclusion chromatography coupled online to multiangle laser light scattering, viscosity measurement, and enzyme activity. The determined optimal and experimentally confirmed incubation conditions were: 33 °C, 30 cm3/min O2 supply, and 190 min reaction time. The granules were thereafter loaded with 2 g/kg 3,6-dichloro-2-methoxybenzoic acid (Dicamba), a broad-spectrum herbicide. According to the HPLC analysis, complete release of Dicamba was achieved after 48 h of release. This study showed the green production of a 100% lignosulfonate-based biodegradable solid carrier with potential application in agriculture.

Enzymes as Green Catalysts and Interactive Biomolecules in Wound Dressing Hydrogels.

Hydrogels are 3D hydrophilic polymer networks that absorb and hold huge amounts of water. Although hydrogels have traditionally been synthesized using chemical and physical methods, rapid developments in enzyme technology that, like chemical-based methods, enable the formation of stable covalent bonds are fast emerging as alternative 'green catalyst' tools. Enzymes show great potential for the synthesis of complex multifunctional wound dressing hydrogels (WDHs) ex situ and in situ as well as in acting as interactive molecules to promote the wound healing process. This review presents advances in the use of enzymes to synthesize WDHs and their fascinating role as bioactive molecules promoting the wound healing process, preventing microbial infection, and providing in situ, in-built infection-detection and diagnostic systems.

Anti-inflammatory and anti-oxidant properties of laccase-synthesized phenolic-O-carboxymethyl chitosan hydrogels.

A bioactive O-carboxymethyl chitosan (CMCS) hydrogel crosslinked with natural phenolics with potential application in wound dressings was synthesized using a laccase from Myceliophthora thermophila (MTL). The highest degree of cross-linking (49.7%) was achieved with catechol. All the phenolic-CMCS hydrogels synthesized showed excellent anti-oxidant properties with a free radical scavenging activity up to 4-fold higher than in the absence of the phenolics, as quantified by the di(phenyl)-(2,4,6-trinitrophenyl)iminoazanium (DPPH) assay. In addition, the hydrogels produced showed an anti-inflammatory effect as evidenced by the inhibition of enzymes [myeloperoxidase (MPO), matrix-metalloproteinase-1 (MMP-1) and human neutrophil elastase (HNE)] over-expressed in chronic wounds. Sinapyl-CMCS hydrogels showed an MMP-1 inhibition of 37%. Further, the phenolic-CMCS hydrogels did not affect the viability of the NIH 3T3 mouse fibroblast cell line and were also able to slowly release human fibroblast growth factor 2, reaching 48.3% over a period of 28days. This study thus shows the possibility of synthesizing multifunctional bioactive chitosan based hydrogels with anti-oxidant and anti-inflammatory properties using natural occurring phenolics as crosslinkers.

Chitosan hydrogel formation using laccase activated phenolics as cross-linkers.

Chitosan hydrogels are gaining increasing interest for biomedical applications due to attractive properties such as biocompatibility. In order to replace toxic chemical cross-linkers for hydrogel formation, we investigated the cross-linking potential of laccase oxidized phenolics. HPLC-TOF-MS and ATR-FTIR demonstrated that phenolics were bond to glucosamine as chitosan model substrate. Phenolics concentrations required for hydrogel formation varied from 500µM for catechol to 5000µM for sinapic acid. The hydrogels showed different swelling and release properties assessed using methylene blue release as a model. Laccase oxidized caffeic acid and pyrogallol-chitosan hydrogels showed excellent behavior in up-taking water with a swelling of 208.7% for caffeic acid. Biocompatibility results did not show any significant inhibition of growth of HEK293 cell line when phenolics like catechol or eugenol were used. Therefore, this study demonstrates that laccase oxidized phenolics are potential cross-linking agents of chitosan as a novel green approach to synthesizing chitosan hydrogels.

Antimicrobial Cellobiose Dehydrogenase-Chitosan Particles.

Increasing prevalence of chronic wounds and microbial infection constitute a severe health challenge. The situation is further complicated by emerging multidrug resistance making the treatment of infections increasingly difficult. Here, a novel antimicrobial system based on in situ release of hydrogen peroxide (H2O2) by cellobiose dehydrogenase (CDH) immobilized on chitosan (CTS) particles is described. Covalent immobilization using carbodiimide coupling lead to a higher amount of protein immobilized on CTS (104 µg CDH/mg CTS) when compared to noncovalent immobilization, which, however, showed highest recovery of CDH activity (0.01 U/mg CTS). The CDH-CTS in situ generated H2O2 completely inhibited growth of Escherichia coli and Staphylococcus aureus over a period of 24 h. This resilient antimicrobial system represents a novel strategy for preventing infection with potential application in counteracting microbial colonization of chronic wounds.

Polymerization of Various Lignins via Immobilized Myceliophthora thermophila Laccase (MtL).

Enzymatic polymerization of lignin is an environmentally-friendly and sustainable method that is investigated for its potential in opening-up new applications of one of the most abundant biopolymers on our planet. In this work, the laccase from Myceliophthora thermophila was successfully immobilized onto Accurel MP1000 beads (67% of protein bound to the polymeric carrier) and the biocatalyzed oxidation of Kraft lignin (KL) and lignosulfonate (LS) were carried out. Fluorescence intensity determination, phenol content analysis and size exclusion chromatography were performed in order to elucidate the extent of the polymerization reaction. The collected results show an 8.5-fold decrease of the LS samples' fluorescence intensity after laccase-mediated oxidation and a 12-fold increase of the weight average molecular weight was obtained.

Cellobiose dehydrogenase functionalized urinary catheter as novel antibiofilm system.

Urinary catheters expose patients to a high risk of acquiring nosocomial infections. To prevent this risk of infection, cellobiose dehydrogenase (CDH), an antimicrobial enzyme able to use various oligosaccharides as electron donors to produce hydrogen peroxide using oxygen as an electron acceptor, was covalently grafted onto plasma-activated urinary polydimethylsiloxane (PDMS) catheter surfaces. Successful immobilization of CDH on PDMS was confirmed by Fourier transformed-infrared spectrometry and production of H2 O2 . The CDH functionalized PDMS surfaces reduced the amount of viable Staphylococcus aureus by 60%, total biomass deposited on the surface by 30% and 70% of biofilm formation. The immobilized CDH was relatively stable in artificial urine over 16 days, retaining 20% of its initial activity. The CDH coated PDMS surface did not affect the growth and physiology of HEK 239 and RAW 264,7 mammalian cells. Therefore this new CDH functionalized catheter system shows great potential for solving the current problems associated with urinary catheters. © 2015 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 104B: 1448-1456, 2016.

Laccase oxidation and removal of toxicants released during combustion processes.

This study reports for the first time the ability of laccases adsorbed on cellulose acetate to eliminate toxicants released during combustion processes. Laccases directly oxidized and eliminated more than 40% w/v of 14 mM of 1,4-dihydroxybenzene (hydroquinone); 2-methyl-1,4-benzenediol (methylhydroquinone); 1,4-dihydroxy-2,3,5-trimethylbenzene (trimethylhydroquinone); 3-methylphenol (m-cresol); 4-methylphenol (p-cresol); 2-methylphenol (o-cresol); 1,3-benzenediol (resorcinol); 1,2-dihydroxybenzene (catechol); 3,4-dihydroxytoluene (4-methylcatechol) and 2-naphthylamine. Further, laccase oxidized 2-naphthylamine, hydroquinone, catechol, methylhydroquinone and methylcatechol were also able to in turn mediate the elimination of >90% w/v of toxicants which are per-se non-laccase substrates such as 3-aminobiphenyl; 4-aminobiphenyl; benz[a]anthracene; 3-(1-nitrosopyrrolidin-2-yl) pyridine (NNN); formaldehyde; 4-(methyl-nitrosamino-1-(3-pyridyl)-1-butanone (NNK); 2-butenal (crotonaldehyde); nitric oxide and vinyl cyanide (acrylonitrile). These studies demonstrate the potential of laccase immobilized on solid supports to remove many structurally different toxicants released during combustion processes. This system has great potential application for in situ removal of toxicants in the manufacturing, food processing and food service industries.