Epigenetic alterations mediate iPSC-induced normalization of DNA repair gene expression and TNR stability in Huntington's disease cells.

Huntington's disease (HD) is a rare autosomal dominant neurodegenerative disorder caused by a cytosine-adenine-guanine (CAG) trinucleotide repeat (TNR) expansion within the HTT gene. The mechanisms underlying HD-associated cellular dysfunction in pluripotency and neurodevelopment are poorly understood. We had previously identified downregulation of selected DNA repair genes in HD fibroblasts relative to wild-type fibroblasts, as a result of promoter hypermethylation. Here, we tested the hypothesis that hypomethylation during cellular reprogramming to the induced pluripotent stem cell (iPSC) state leads to upregulation of DNA repair genes and stabilization of TNRs in HD cells. We sought to determine how the HD TNR region is affected by global epigenetic changes through cellular reprogramming and early neurodifferentiation. We find that early stage HD-affected neural stem cells (HD-NSCs) contain increased levels of global 5-hydroxymethylation (5-hmC) and normalized DNA repair gene expression. We confirm TNR stability is induced in iPSCs, and maintained in HD-NSCs. We also identify that upregulation of 5-hmC increases ten-eleven translocation 1 and 2 (TET1/2) protein levels, and show their knockdown leads to a corresponding decrease in the expression of select DNA repair genes. We further confirm decreased expression of TET1/2-regulating miR-29 family members in HD-NSCs. Our findings demonstrate that mechanisms associated with pluripotency induction lead to a recovery in the expression of select DNA repair gene and stabilize pathogenic TNRs in HD.

Preferential Lineage-Specific Differentiation of Osteoblast-Derived Induced Pluripotent Stem Cells into Osteoprogenitors.

While induced pluripotent stem cells (iPSCs) hold great clinical promise, one hurdle that remains is the existence of a parental germ-layer memory in reprogrammed cells leading to preferential differentiation fates. While it is problematic for generating cells vastly different from the reprogrammed cells' origins, it could be advantageous for the reliable generation of germ-layer specific cell types for future therapeutic use. Here we use human osteoblast-derived iPSCs (hOB-iPSCs) to generate induced osteoprogenitors (iOPs). Osteoblasts were successfully reprogrammed and demonstrated by endogenous upregulation of Oct4, Sox2, Nanog, TRA-1-81, TRA-16-1, SSEA3, and confirmatory hPSC Scorecard Algorithmic Assessment. The hOB-iPSCs formed embryoid bodies with cells of ectoderm and mesoderm but have low capacity to form endodermal cells. Differentiation into osteoprogenitors occurred within only 2-6 days, with a population doubling rate of less than 24 hrs; however, hOB-iPSC derived osteoprogenitors were only able to form osteogenic and chondrogenic cells but not adipogenic cells. Consistent with this, hOB-iOPs were found to have higher methylation of PPARγ but similar levels of methylation on the RUNX2 promoter. These data demonstrate that iPSCs can be generated from human osteoblasts, but variant methylation patterns affect their differentiation capacities. Therefore, epigenetic memory can be exploited for efficient generation of clinically relevant quantities of osteoprogenitor cells.

Accessible bioprinting: adaptation of a low-cost 3D-printer for precise cell placement and stem cell differentiation.

The precision and repeatability offered by computer-aided design and computer-numerically controlled techniques in biofabrication processes is quickly becoming an industry standard. However, many hurdles still exist before these techniques can be used in research laboratories for cellular and molecular biology applications. Extrusion-based bioprinting systems have been characterized by high development costs, injector clogging, difficulty achieving small cell number deposits, decreased cell viability, and altered cell function post-printing. To circumvent the high-price barrier to entry of conventional bioprinters, we designed and 3D printed components for the adaptation of an inexpensive 'off-the-shelf' commercially available 3D printer. We also demonstrate via goal based computer simulations that the needle geometries of conventional commercially standardized, 'luer-lock' syringe-needle systems cause many of the issues plaguing conventional bioprinters. To address these performance limitations we optimized flow within several microneedle geometries, which revealed a short tapered injector design with minimal cylindrical needle length was ideal to minimize cell strain and accretion. We then experimentally quantified these geometries using pulled glass microcapillary pipettes and our modified, low-cost 3D printer. This systems performance validated our models exhibiting: reduced clogging, single cell print resolution, and maintenance of cell viability without the use of a sacrificial vehicle. Using this system we show the successful printing of human induced pluripotent stem cells (hiPSCs) into Geltrex and note their retention of a pluripotent state 7 d post printing. We also show embryoid body differentiation of hiPSC by injection into differentiation conducive environments, wherein we observed continuous growth, emergence of various evaginations, and post-printing gene expression indicative of the presence of all three germ layers. These data demonstrate an accessible open-source 3D bioprinter capable of serving the needs of any laboratory interested in 3D cellular interactions and tissue engineering.

DNA Methylation Leads to DNA Repair Gene Down-Regulation and Trinucleotide Repeat Expansion in Patient-Derived Huntington Disease Cells.

Huntington disease (HD) is an autosomal dominantly inherited disease that exhibits genetic anticipation of affected progeny due to expansions of a trinucleotide repeat (TNR) region within the HTT gene. DNA repair machinery is a known effector of TNR instability; however, the specific defects in HD cells that lead to TNR expansion are unknown. We hypothesized that HD cells would be deficient in DNA repair gene expression. To test this hypothesis, we analyzed expression of select DNA repair genes involved in mismatch/loop-out repair (APEX1, BRCA1, RPA1, and RPA3) in patient-derived HD cells and found each was consistently down-regulated relative to wild-type samples taken from unaffected individuals in the same family. Rescue of DNA repair gene expression by 5-azacytidine treatment identified DNA methylation as a mediator of DNA repair gene expression deficiency. Bisulfite sequencing confirmed hypermethylation of the APEX1 promoter region in HD cells relative to control, as well as 5-azacytidine-induced hypomethylation. 5-Azacytidine treatments also resulted in stabilization of TNR expansion within the mutant HTT allele during long-term culture of HD cells. Our findings indicate that DNA methylation leads to DNA repair down-regulation and TNR instability in mitotically active HD cells and offer a proof of principle that epigenetic interventions can curb TNR expansions.

Enhanced osseous integration of human trabecular allografts following surface modification with bioactive lipids.

In this study, we used extracellular matrix (ECM) gels and human bone allograft as matrix vehicles to deliver the sphingolipid growth factor FTY720 to rodent models of tibial fracture and a critical-sized cranial defect. We show that FTY720 released from injectable ECM gels may accelerate callous formation and resolution and bone volume in a mouse tibial fracture model. We then show that FTY720 binds directly to human trabecular allograft bone and releases over 1 week in vitro. Rat critical-sized cranial defects treated with FTY720-coated grafts show increases in vascularization and bone deposition, with histological and micro-computed topography (microCT) evidence of enhanced bone formation within the graft and defect void. Immunohistochemical analysis suggests that osteogenesis within FTY720-coated grafts is associated with reduced CD68(+) macrophage infiltration and recruitment of CD29(+) bone progenitor cells. Matrix binding of FTY720 thus represents a promising and robust bone regeneration strategy with potential clinical translatability.

Bioactive lipid coating of bone allografts directs engraftment and fate determination of bone marrow-derived cells in rat GFP chimeras.

Bone grafting procedures are performed to treat wounds incurred during wartime trauma, accidents, and tumor resections. Endogenous mechanisms of repair are often insufficient to ensure integration between host and donor bone and subsequent restoration of function. We investigated the role that bone marrow-derived cells play in bone regeneration and sought to increase their contributions by functionalizing bone allografts with bioactive lipid coatings. Polymer-coated allografts were used to locally deliver the immunomodulatory small molecule FTY720 in tibial defects created in rat bone marrow chimeras containing genetically-labeled bone marrow for monitoring cell origin and fate. Donor bone marrow contributed significantly to both myeloid and osteogenic cells in remodeling tissue surrounding allografts. FTY720 coatings altered the phenotype of immune cells two weeks post-injury, which was associated with increased vascularization and bone formation surrounding allografts. Consequently, degradable polymer coating strategies that deliver small molecule growth factors such as FTY720 represent a novel therapeutic strategy for harnessing endogenous bone marrow-derived progenitors and enhancing healing in load-bearing bone defects.

A novel cardiac muscle-derived biomaterial reduces dyskinesia and postinfarct left ventricular remodeling in a mouse model of myocardial infarction.

Extracellular matrix (ECM) degradation after myocardial infarction (MI) leaves the myocardium structurally weakened and, as a result, susceptible to early infarct zone dyskinesia and left ventricular (LV) remodeling. While various cellular and biomaterial preparations have been transplanted into the infarct zone in hopes of improving post-MI LV remodeling, an allogeneic cardiac muscle-derived ECM extract has yet to be developed and tested in the setting of reperfused MI. We sought to determine the effects of injecting a novel cardiac muscle-derived ECM into the infarct zone on early dyskinesia and LV remodeling in a mouse model of MI. Cardiac muscle ECM was extracted from frozen mouse heart tissue by a protocol that enriches for basement membrane constituents. The extract was injected into the infarct zone immediately after ischemia/reperfusion injury (n = 6). Echocardiography was performed at baseline and at days 2, 7, 14, and 28 post-MI to assess 3D LV volumes and cardiac function, as compared to infarcted controls (n = 9). Early infarct zone dyskinesia was measured on day 2 post-MI using a novel metric, the dyskinesia index. End-systolic volume was significantly reduced in the ECM-treated group compared to controls by day 14. Ejection fraction and stroke volume were also significantly improved in the ECM-treated group. ECM-treated hearts showed a significant (P < 0.005) reduction in dyskinetic motion on day 2. Thus, using high-frequency ultrasound, it was shown that treatment with a cardiac-derived ECM preparation reduced early infarct zone dyskinesia and post-MI LV remodeling in a mouse model of reperfused MI.

Laminin- and basement membrane-polycaprolactone blend nanofibers as a scaffold for regenerative medicine.

Mimicking one or more components of the basement membrane (BM) holds great promise for overcoming insufficiencies in tissue engineering therapies. We have electrospun laminin nanofibers (NFs) isolated from the murine Engelbreth-Holm Swarm (EHS) tumor and evaluated them as a scaffold for embryonic stem cell culture. Seeded human embryonic stem cells were found to better maintain their undifferentiated, colony environment when cultured on laminin NFs compared to laminin mats, with 75% remaining undifferentiated on NFs. Mouse embryonic stem cells cultured on 10% laminin-polycaprolactone (PCL) NFs maintained their colony formation for twice as long without passage compared to those on PCL or gelatin substrates. In addition, we have established a protocol for electrospinning reconstituted basement membrane aligned (RBM)-PCL NFs within 10° of angular deviation. Neuron-like PC12 cells show significantly greater attachment (p < 0.001) and percentage of neurite-extending cells in vitro on 10% RBM-PCL NFs when compared to 1% and 0% RBM-PCL NFs (p < 0.015 and p < 0.001, respectively). Together, these results implicate laminin- and RBM-PCL scaffolds as a promising biomimetic substrate for regenerative medicine applications.

Local delivery of FTY720 accelerates cranial allograft incorporation and bone formation.

Endogenous stem cell recruitment to the site of skeletal injury is key to enhanced osseous remodeling and neovascularization. To this end, this study utilized a novel bone allograft coating of poly(lactic-co-glycolic acid) (PLAGA) to sustain the release of FTY720, a selective agonist for sphingosine 1-phosphate (S1P) receptors, from calvarial allografts. Uncoated allografts, vehicle-coated, low dose FTY720 in PLAGA (1:200 w:w) and high dose FTY720 in PLAGA (1:40) were implanted into critical size calvarial bone defects. The ability of local FTY720 delivery to promote angiogenesis, maximize osteoinductivity and improve allograft incorporation by recruitment of bone progenitor cells from surrounding soft tissues and microcirculation was evaluated. FTY720 bioactivity after encapsulation and release was confirmed with sphingosine kinase 2 assays. HPLC-MS quantified about 50% loaded FTY720 release of the total encapsulated drug (4.5 µg) after 5 days. Following 2 weeks of defect healing, FTY720 delivery led to statistically significant increases in bone volumes compared to controls, with total bone volume increases for uncoated, coated, low FTY720 and high FTY720 of 5.98, 3.38, 7.2 and 8.9 mm(3), respectively. The rate and extent of enhanced bone growth persisted through week 4 but, by week 8, increases in bone formation in FTY720 groups were no longer statistically significant. However, micro-computed tomography (microCT) of contrast enhanced vascular ingrowth (MICROFIL®) and histological analysis showed enhanced integration as well as directed bone growth in both high and low dose FTY720 groups compared to controls.

Alignment and composition of laminin-polycaprolactone nanofiber blends enhance peripheral nerve regeneration.

Peripheral nerve transection occurs commonly in traumatic injury, causing deficits distal to the injury site. Conduits for repair currently on the market are hollow tubes; however, they often fail due to slow regeneration over long gaps. To facilitate increased regeneration speed and functional recovery, the ideal conduit should provide biochemically relevant signals and physical guidance cues, thus playing an active role in regeneration. To that end, laminin and laminin-polycaprolactone (PCL) blend nanofibers were fabricated to mimic peripheral nerve basement membrane. In vitro assays established 10% (wt) laminin content is sufficient to retain neurite-promoting effects of laminin. In addition, modified collector plate design to introduce an insulating gap enabled the fabrication of aligned nanofibers. The effects of laminin content and fiber orientation were evaluated in rat tibial nerve defect model. The lumens of conduits were filled with nanofiber meshes of varying laminin content and alignment to assess changes in motor and sensory recovery. Retrograde nerve conduction speed at 6 weeks was significantly faster in animals receiving aligned nanofiber conduits than in those receiving random nanofiber conduits. Animals receiving nanofiber-filled conduits showed some conduction in both anterograde and retrograde directions, whereas in animals receiving hollow conduits, no impulse conduction was detected. Aligned PCL nanofibers significantly improved motor function; aligned laminin blend nanofibers yielded the best sensory function recovery. In both cases, nanofiber-filled conduits resulted in better functional recovery than hollow conduits. These studies provide a firm foundation for the use of natural-synthetic blend electrospun nanofibers to enhance existing hollow nerve guidance conduits.

Expression of transforming growth factor-ß-responsive smads in cranial suture development and closure.

The transforming growth factor-ß (TGF-ß) family of extracellular signaling molecules is heavily involved in developmental events, including patterning, formation, maintenance, and closure of the cranial suture. Several studies have demonstrated that TGF-ßs are temporally and spatially localized to the suture and play a pivotal role in sutural state. These signals are translated into intracellular activity through a family of proteins known as smads. There are 8 known smads, with smads 1, 5, and 8 transducing BMP signals and smads 2 and 3 transducing TGF-ß signals. Dimerization of any of these smads and smad 4 is necessary for phosphorylation and activation. Although many studies have delineated the presence of TGF-ß during suture closure, no studies have determined smad activity. It was hypothesized that smad activity would change during sutural closure. Reverse transcription-polymerase chain reaction was used to determine whether TGF-ß-responsive smads were present in the suture at which point they were immunohistochemically localized. A rat model was used in which the posterior intrafrontal suture fused during neonatal days 16 to 22. Time points before and after this event were analyzed for changes in smad expression and function. It was determined from these experiments that (1) the TGF-ß-responsive smads 2, 3, and 4 are all present in the suture; (2) smads 2 and 4 are distributed in the region of the osteogenic front of the suture; and (3) smad 2/4 activity decreases in areas in which presumptive bone will form. These results add to the knowledge present about sutural development and may provide news targets to which therapeutics can be developed.

Injectable tissue-engineered bone repair of a rat calvarial defect.

OBJECTIVES/HYPOTHESIS: Advances in bone repair have focused on the minimally-invasive delivery of tissue-engineered bone (TEB). A promising injectable biopolymer of chitosan and inorganic phosphates was seeded with mesenchymal stem cells (MSCs) and a bone growth factor (BMP-2), and evaluated in a rat calvarial critical size defect (CSD). Green fluorescent protein (GFP)-labeled MSCs are used to evaluate patterns of cell viability and proliferation. STUDY DESIGN: Prospective, controlled trial in an animal model. METHODS: In 30 male rats, 8-mm calvarial CSDs were created, and divided into five groups of six animals each. In the experimental groups, the defects were injected with either chitosan gel, gel loaded with MSCs (0.3 x 10(6) cells/defect), gel loaded with BMP-2 (2 microg/defect), or gel loaded with both MSC and BMP-2. In the control group, the defect was left untreated. At 4 weeks, in vivo microcomputed tomography (micro-CT) analysis was performed. At 8 weeks, calvarial specimens were examined by micro-CT, histology, and immunohistochemistry. RESULTS: New areas of bone growth were seen in the defects of all treated animals. Micro-CT analysis revealed a significant (P < .001) time-dependent increase in the regeneration of bone volume and bone area in defects treated with gel/MSC/BMP-2 as compared to all other groups. Histological analysis confirmed this difference. GFP-labeled TEB was detected within the areas of new bone, indicating cell viability and contribution to new bone growth by the injected MSC. CONCLUSIONS: This study demonstrates that an injectable form of TEB using a chitosan gel, MSC, and BMP-2 can enhance bone formation in a rat calvarial CSD.

FTY720 promotes local microvascular network formation and regeneration of cranial bone defects.

The calvarial bone microenvironment contains a unique progenitor niche that should be considered for therapeutic manipulation when designing regeneration strategies. Recently, our group demonstrated that cells isolated from the dura are multipotent and exhibit expansion potential and robust mineralization on biodegradable constructs in vitro. In this study, we evaluate the effectiveness of healing critical-sized cranial bone defects by enhancing microvascular network growth and host dura progenitor trafficking to the defect space pharmacologically by delivering drugs targeted to sphingosine 1-phosphate (S1P) receptors. We demonstrate that delivery of pharmacological agonists to (S1P) receptors S1P(1) and S1P(3) significantly increase bone ingrowth, total microvessel density, and smooth muscle cell investment on nascent microvessels within the defect space. Further, in vitro proliferation and migration studies suggest that selective activation of S1P(3) promotes recruitment and growth of osteoblastic progenitors from the meningeal dura mater.

Adipose stem cells and solid organ transplantation.

PURPOSE OF REVIEW: This review will cover the basic research performed with adipose stem cells (ASCs) over the past several years as well as pertinent translational research. The properties of ASCs that make them particularly interesting to the transplant surgeon will then be covered. These properties include regeneration of native tissue, support of microvasculature, and immunomodulation. These properties will undoubtedly expand the future utility of these cells. RECENT FINDINGS: Recent literature demonstrates that ASCs are able to differentiate into phenotypes resembling hepatic and pancreatic lineages. In addition, several groups have shown that ASCs possess immunomodulatory properties similar to bone marrow-derived mesenchymal stem cells. Several clinical case reports also suggest that ASCs are an effective treatment option for graft-versus-host disease. SUMMARY: Due to their ability to differentiate into pertinent target lineages, their ability to enhance angiogenesis, and their ability to impact immunologic responses, ASCs may prove clinically useful for the transplant surgeon.

Laminin nanofiber meshes that mimic morphological properties and bioactivity of basement membranes.

The basement membrane protein, laminin I, has been used broadly as a planar two-dimensional film or in a three-dimensional form as a reconstituted basement membrane gel such as Matrigel to support cellular attachment, growth, and differentiation in vitro. In basement membranes in vivo, laminin exhibits a fibrillar morphology, highlighting the electrospinning process as an ideal method to recreate such fibrous substrates in vitro. Electrospinning was employed to fabricate meshes of murine laminin I nanofibers (LNFs) with fiber size, geometry, and porosity of authentic basement membranes. Purified laminin I was solubilized and electrospun in parametric studies of fiber diameters as a function of polymer solution concentration, collecting distance, and flow rate. Resulting fiber diameters ranged from 90 to 300 nm with mesh morphologies containing beads. Unlike previously described nanofibers (NFs) synthesized from proteins such as collagen, meshes of LNFs retain their structural features when wetted and do not require fixation by chemical crosslinking, which often destroys cell attachment and other biological activity. The LNF meshes maintained their geometry for at least 2 days in culture without chemical crosslinking. PC12 cells extended neurites without nerve growth factor stimulation on LNF substrates. Additionally, LNFs significantly enhance both the rate and quantity of attachment of human adipose stem cells (ASCs) compared to laminin films. ASCs were viable and maintained attachment to LNF meshes in serum-free media for at least 3 days in culture and extended neurite-like processes after 24 h in serum-free media conditions without media additives to induce differentiation. LNF meshes are a novel substrate for cell studies in vitro, whose properties may be an excellent scaffold material for delivering cells in tissue engineering applications in vivo.

Comparative effects of scaffold pore size, pore volume, and total void volume on cranial bone healing patterns using microsphere-based scaffolds.

Bony craniofacial deficits resulting from injury, disease, or birth defects remain a considerable clinical challenge. In this study, microsphere-based scaffold fabrication methods were use to study the respective effects of scaffold pore size, open pore volume, and total void volume fraction on osseous tissue infiltration and bone regeneration in a critical size rat cranial defect. To compare the healing effects of these parameters, three different scaffolds types were fabricated: solid 100 microm spheres, solid 500 microm spheres, and hollow 500 microm spheres. These constructs were implanted into surgically created rat calvarial defects. By 90-days post op, results of micro computed tomography (CT) analysis showed that all scaffolds generated similar amounts of new bone which was significantly greater than untreated controls. Interestingly, the spatial distribution of new bone within the defect area varied by scaffold group. MicroCT and histological analysis demonstrated healing restricted to the dural side in the hollow 500 microm group, whereas the solid 500 microm group demonstrated healing along the dural side and within the center of the defect. Solid 100 microm groups demonstrated healing along the dural layer, periosteal layer, and within the center of the defect. These results suggest that pore size and closed void volume may both play important roles in scaffold degradation patterns and associated bone healing.

Collagen nanofibres are a biomimetic substrate for the serum-free osteogenic differentiation of human adipose stem cells.

Electrospinning has recently gained widespread attention as a process capable of producing nanoscale fibres that mimic native extracellular matrix. In this study, we compared the osteogenic differentiation behaviour of human adipose stem cells (ASCs) on a 3D nanofibre matrix of type I rat tail collagen (RTC) and a 2D RTC collagen-coated substrate, using a novel serum-free osteogenic medium. The serum-free medium significantly enhanced the numbers of proliferating cells in culture, compared to ASCs in traditional basal medium containing 10% animal serum, highlighting a potential clinical role for in vitro stem cell expansion. Osteogenic differentiation behaviour was assessed at days 7, 14 and 21 using quantitative real-time RT-PCR analysis of the osteogenic genes collagen I (Coll I), alkaline phosphatase (ALP), osteopontin (OP), osteonectin (ON), osteocalcin (OC) and core-binding factor-alpha (cbfa1). All genes were upregulated (>one-fold) in ASCs cultured on nanofibre scaffolds over 2D collagen coatings by day 21. Synthesis of mineralized extracellular matrix on the scaffolds was assessed on day 21 with Alizarin red staining. These studies demonstrate that 3D nanoscale morphology plays a critical role in regulating cell fate processes and in vitro osteogenic differentiation of ASCs under serum-free conditions.

Proliferative capacity and osteogenic potential of novel dura mater stem cells on poly-lactic-co-glycolic acid.

The rational design of biomimetic structures for the regeneration of damaged or missing tissue is a fundamental principle of tissue engineering. Multiple variables must be optimized, ranging from the scaffold type to the selection and properties of implanted cell(s). In this study, the osteogenic potential of a novel stem cell was analyzed on biodegradable poly(lactic-co-glycolic acid) (PLGA) biomaterials as a step toward creating new cell-materials constructs for bony regeneration. Dura mater stem cells (DSCs), isolated from rat dura mater, were evaluated and compared to bone marrow stem cells (BMSCs) for proliferative and differentiative properties in vitro. Experiments were carried out on both tissue culture plastic (TCP) and 2D planar films of PLGA. Proliferation of DSCs on both TCP and PLGA films increased over 21 days. Positive fold inductions in all five bone marker genes were observed at days 7, 14, 21 in all experimental samples compared with day 0 controls. DSCs demonstrated greater cell coverage and enhanced matrix staining on 2D PLGA films when compared with BMSCs. These cells can be isolated and expanded in culture and can subsequently attach, proliferate, and differentiate on both TCP and PLGA films to a greater extent than BMSCs. This suggests that DSCs are promising for cell-based bone tissue engineering therapies, particularly those applications involving regeneration of cranial bones.

Tensional forces influence gene expression and sutural state of rat calvariae in vitro.

BACKGROUND: Theories regarding the cause of craniosynostosis that are more than 15 years old cite the role that tensional forces play in the normal and abnormal development of the cranial suture. These theories highlight the effect of stress bands originating from the skull base to the vertex, guiding sutural development. METHODS: In this study, the normally fusing posterior intrafrontal suture of the rat was subjected to 3 mN of tensional force for 30 minutes per day. The suture was then assessed for patency, proliferation, apoptosis, and transforming growth factor (TGF)-beta signaling components. RESULTS: Sutures that were subjected to tensional force were histologically patent at the end of 14 days. This was in contrast to sutures that were maintained without force. Proliferative and apoptotic activity was increased also in sutures maintained open artificially. Interestingly, levels of active TGF-beta-signaling components were also increased in force-maintained sutures. CONCLUSIONS: Sutural maintenance by mechanical force is concurrent with modulation of cellular activity and protein expression reminiscent of the open suture. This study demonstrates the dynamic reciprocity existing between biochemical activity and morphologic state. Although it is known that changes in TGF-betas and fibroblast growth factors can cause sutural fusion, this is the first study to demonstrate that abrogation of sutural closure is responsible for growth factor signaling modulation.