Three-Dimensional Analysis of Bone Remodeling After Closed Treatment for Mandibular Condylar Head Fracture.

Closed treatment of mandibular condylar fractures has been used for its indications based on the fracture site, fracture status, and patient age. Posttreatment mandibular condyle size is associated with mandibular function; however, a few studies have reported bone remodeling patterns and volume changes in the condyle and glenoid fossa after mandibular condylar head fractures (CHFs). Therefore, volumetric changes in the mandibular condyle and glenoid fossa were analyzed in the present study, and bone remodeling patterns were evaluated after mandibular CHFs. The present study included 16 condyles from 12 patients who received closed treatment for CHF. After reconstruction of a 3-dimensional skull model, including the mandible, using computed tomography data taken immediately after injury and 6 months after treatment, volume changes in the mandibular condyle and glenoid fossa were analyzed. The condylar volume increased by 0.32±0.66 cm3 during the 6-month healing period without statistical significance (P=0.093). Regarding the glenoid fossa, the fossa showed a statistically significant volume increase of 0.41±0.59 cm3 (P=0.021), and 12 glenoid fossae (75%) showed downward bone apposition; however, no change or only mild bone resorption was observed in 4 glenoid fossae (25%). The results of this study indicated that the volume changes in the mandibular condyle after closed treatment of a mandibular CHF are not significant, and the glenoid fossa adapts to the displaced mandibular condyle through downward growth accompanied by volume increase.

Transoral Endoscopy-Assisted Tongue-Lip Adhesion With Modified Tongue Base Suspension in a Pierre-Robin Sequence: A Safe and Effective Technique.

Life-threatening airway obstruction is a major concern in patients with Pierre-Robin sequence. Tongue-lip adhesion (TLA) has been used to manage airway obstruction. The authors present the case of a female neonate with Pierre-Robin sequence who presented with airway obstruction and a cleft palate. She underwent a TLA procedure with modified tongue base suspension (TBS). Endoscopy was used to check and control the traction of the tongue base to enable unobstructed self-ventilation. Positive outcomes including improved O2 saturation and weight gain were noted. The effectiveness of TLA was enhanced by using TBS with real-time endoscopy to evaluate the oropharyngeal airway space required to alleviate airway obstruction. The use of endoscopy enabled us to check and determine how much the tongue base should be tracted by manipulating the tongue anteriorly and posteriorly. The authors report transoral endoscopy-assisted TLA and modified TBS.

Condylar volume and positional changes following a bilateral sagittal split ramus osteotomy in skeletal class II and III malocclusions.

BACKGROUND: Mandibular condyle remodeling and displacement are post-orthognathic surgery concerns that can potentially lead to occlusal issues after bilateral sagittal split ramus osteotomy. This retrospective study examined the relationship between condylar volume changes and position alterations after surgery in patients with skeletal class II and III malocclusions using cone-beam CT. METHODS: The study included 16 patients (6 with Class II malocclusion, 10 with Class III malocclusion) who underwent bilateral sagittal split ramus osteotomy at Chonnam National University Hospital. Cone-beam CT data were collected at three specific time points: before surgery, immediately after surgery, and approximately 6 months post-surgery. Mandibular movement was measured using InVivoDental 5.4.6. ITK-SNAP 3.8.0 was used to assessed condylar volume changes post-surgery. Condyle positions were evaluated in four parts with RadiAnt DICOM Viewer 4.6.9. Statistical analyses were performed using the SPSS version 23. RESULTS: Considering both Class II and III malocclusion, a 2.91% volume reduction was noted immediately and at 6 months after surgery. Both Class II and III cases demonstrated a decrease in superior joint space by -0.59 mm and medial joint space by -1.09 mm. No significant correlation was found between this process and condylar volume change. CONCLUSIONS: The mandibular condyle volume decreased, and superior-medial movement of the condyle was detected in patients with Class II and III malocclusion immediately and at 6 months after surgery with no volume-position correlation.

Redox-Sensitive Delivery of Doxorubicin from Nanoparticles of Poly(ethylene glycol)-Chitosan Copolymer for Treatment of Drug-Resistant Oral Cancer Cells.

Reactive oxygen species (ROS)-sensitive polymer nanoparticles were synthesized for tumor targeting of an anticancer drug, doxorubicin (DOX). For this purpose, chitosan-methoxy poly(ethylene glycol) (mPEG) (ChitoPEG)-graft copolymer was synthesized and then DOX was conjugated to the backbone of chitosan using a thioketal linker. Subsequently, the chemical structure of the DOX-conjugated ChitoPEG copolymer (ChitoPEGthDOX) was confirmed via 1H nuclear magnetic resonance (NMR) spectra. Nanoparticles of the ChitoPEGthDOX conjugates have spherical shapes and a size of approximately 100 nm. Transmission electron microscopy (TEM) has shown that ChitoPEGthDOX nanoparticles disintegrate in the presence of hydrogen peroxide and the particle size distribution also changes from a monomodal/narrow distribution pattern to a multi-modal/wide distribution pattern. Furthermore, DOX is released faster in the presence of hydrogen peroxide. These results indicated that ChitoPEGthDOX nanoparticles have ROS sensitivity. The anticancer activity of the nanoparticles was evaluated using AT84 oral squamous carcinoma cells. Moreover, DOX-resistant AT84 cells were prepared in vitro. DOX and its nanoparticles showed dose-dependent cytotoxicity in both DOX-sensitive and DOX-resistant AT84 cells in vitro. However, DOX itself showed reduced cytotoxicity against DOX-resistant AT84 cells, while the nanoparticles showed almost similar cytotoxicity to DOX-sensitive and DOX-resistant AT84 cells. This result may be due to the inhibition of intracellular delivery of free DOX, while nanoparticles were efficiently internalized in DOX-resistant cells. The in vivo study of a DOX-resistant AT84 cell-bearing tumor xenograft model showed that nanoparticles have higher antitumor efficacy than those found in free DOX treatment. These results may be related to the efficient accumulation of nanoparticles in the tumor tissue, i.e., the fluorescence intensity in the tumor tissue was stronger than that of any other organs. Our findings suggest that ChitoPEGthDOX nanoparticles may be a promising candidate for ROS-sensitive anticancer delivery against DOX-resistant oral cancer cells.

Can Fracture Reduction be Attempted Through a 3D-Printed Guide Template Without Maxillomandibular Fixation?

BACKGROUND: Computer-aided design and manufacturing (CAD/CAM) is widely used in clinical practice. This technology may change existing methods for mandibular fracture management. PURPOSE: The purpose of this in-vitro study was to determine if the reduction for mandibular symphysis fracture can be performed without maxillomandibular fixation (MMF) using 3-dimensional (3D)-printed template. STUDY DESIGN, SETTING, AND SAMPLE: This in-vitro study was designed as a proof-of-concept. The sample was composed of 20 existing pairs of intraoral scan and computed tomography (CT) data. A mandibular model stereolithography (STL) file was created by merging the STL file obtained for the bimaxillary dentitions with the CT DICOM file, and this was set as the original model. Using the original model, a STL file of a fracture model of the mandibular symphysis was created using CAD. A template similar to a wafer or an implant guide was manufactured to restore original occlusion, and the mandibular fracture model was reduced and fixed using the 3D-printed template and wire. This was set as the experimental group. The 3D coordinate system error was measured at 6 landmarks and statistically compared using scan data between models of the groups. PREDICTOR/EXPOSURE/INDEPENDENT VARIABLES: Reduction techniques with MMF or without MMF using guide template for mandibular fracture model. MAIN OUTCOME VARIABLE(S): The 3D coordinate system error (mm). COVARIATES: The position of landmarks. ANALYSES: The Mann-Whitney U test, student's t-test, and the Kruskal-Wallis test were used to analyze the coordinate errors between the landmarks. A P value of < .05 was considered statistically significant. RESULTS: The 3D error value of the control and experimental group were 1.06 ± 0.63 mm (range: 0.11 to 2.92 mm) and 0.96 ± 0.48 mm (range: 0.2 to 2.95 mm), respectively. There was no statistical difference between the control and experimental group. There was a statistically significant difference in the lower 2 and lower 3 landmarks compared to the upper 1 (P = .001 and .000, respectively) before and after the reduction in the experimental group. CONCLUSION AND RELEVANCE: This study demonstrates that the reduction using a 3D-printed guide template for the mandibular symphysis fracture could be possible even without the MMF.

Accuracy of digital surgical guides for dental implants.

BACKGROUND: Recently developed imaging techniques, such as cone beam computed tomography (CBCT) and CAD/CAM technology, have facilitated reliable implant planning and implant surgical guide production by 3D printing. This study compared the accuracy of implant-guided surgery using the R2GATE® program with CBCT before and after surgery. PATIENTS AND METHODS: The study included patients who visited the Department of Oral and Maxillofacial Surgery at Chonnam National University Hospital from September 2021 to March 2022. Twenty-four implants were placed in eleven patients. Using R2GATE® Windows (Megagen implant, Daegu, Korea) software, implant placement was planned. The difference was measured by the CBCT before and after surgery. The cervical and apical distance and angular deviation of the implants were measured. Statistical analysis was performed using an independent t-test, Pearson correlation, and multiple regression analyses. RESULTS: The three-dimensional linear distance difference between the planned implant and the placed implant was 0.97 ± 0.37 mm at the cervical and 1.13 ± 0.36 mm at the apical. The difference in angle deviation between the planned implant and the placed implant was 3.42 ± 2.12°. Among the variables affecting the accuracy of implant placement, a statistically significant difference was found when using a tissue-supported implant guide, implant diameter and implant length. CONCLUSION: Based on these results, using the R2GATE® program is useful to use an implant digital surgical guide, and it will be used in various clinic.

Open versus closed treatment for extracapsular fracture of the mandibular condyle.

Objectives: Selection of treatment methods for mandibular condylar fractures remains controversial. In this study, we investigated treatment methods for condylar fractures to determine the indications for open or closed reduction. Patients and. Methods: Patients >12 years of age treated for mandibular condylar fractures with a follow-up period of ≥3 months were included in this study. The medical records of enrolled patients were reviewed for sex, age, fracture site, treatment method (open or closed reconstruction), postoperative intermaxillary fixation period, operation time, and complications. Radiological analysis of fracture fragment displacement and changes in ramal height difference was performed using computed tomography and panoramic radiography. Results: A total of 198 patients was investigated, 48.0% (n=95) of whom underwent closed reduction and 52.0% (n=103) underwent open reduction. There was no significant correlation between reduction method and patient sex, age, or follow-up period. No statistically significant difference between the incidence of complications and treatment method was observed. None of the patients underwent open reduction of condylar head fracture. Binary logistic regression analysis showed that open reduction was significantly more frequent in patients with subcondylar fracture compared to in those with a fracture in the condylar head area. There was no statistically significant correlation between the groups and fracture fragment displacement. However, there was a significant difference between the treatment groups in amount of change in ramal height difference between the fractured and the nonfractured sides during treatment. Conclusion: No significant clinical differences were found between the open and closed reduction methods in patients with mandibular condylar fractures. According to fracture site, closed reduction was preferred for condyle head fractures. There was no significant relationship between fracture fragment displacement and treatment method.

Comparison of short-term condylar positional changes in mandibular prognathism after surgery-first approach: Symmetric setback versus asymmetric setback.

The aim of this study was to compare how the displacement of the mandibular condyle changed after symmetric or asymmetric mandibular setback surgery using the surgery-first approach (SFA). Patients who underwent mandibular setback surgery using the SFA were selected and divided into a symmetry group (n = 18) with differences of less than 2 mm between the right and left setback, and an asymmetry group (n = 18) with a difference of greater than 2 mm. Cone-beam computed tomography (CBCT)-generated cephalograms were obtained after three-dimensional superimposition of CBCT images taken before surgery (T0), within one week after surgery (T1), and seven months after surgery (T2). The condylar positions were measured. Condylar positional changes according to time were compared between the two groups and correlation analysis was performed. There were significant positional changes in mandibular condyles over time in both groups. However, most of these changes returned to their initial state. In the asymmetry group, there was a greater internal rotation of the mandibular condyle on the lesser setback side. The correlation analysis results revealed that only the setback difference was associated with rotational displacement of the condyle on the lesser setback side at two time points (T1-T0, T2-T0). In the SFA, significant condylar displacement occurred immediately after both symmetric and asymmetric mandibular setback surgery, and the right/left difference in mandibular setback showed a significant positive correlation with rotational displacement. Although more significant rotational displacement of the mandibular condyle was observed after asymmetric mandibular setback surgery, the amount was not large enough to be clinically significant.

Evaluation of mandibular positional changes after orthognathic surgery in skeletal class II and class III surgery-first approach patients.

PURPOSE: The aim of this study was to predict and compare postoperative changes of mandibular position between mandibular setback and advancement surgery in a surgery-first approach (SFA). MATERIALS AND METHODS: The study population included patients who underwent mandibular setback or advancement surgery using bilateral sagittal split ramus osteotomy, those were divided into two groups: mandibular setback and advancement surgery. Surgical and postoperative mandibular positional changes were evaluated by lateral cephalograms and CTs taken within 2 months before surgery (T0), 1 week after surgery (T1), and after the debonding procedure (T2). The postoperative mandibular positional changes were predicted from the increase in vertical dimension (VD) in surgical occlusion and the counterclockwise rotation to the preoperative VD on the lateral cephalograms and CT at T1. Furthermore, resultant measurement on postoperative mandibular positional changes was performed. Finally, we compared the prediction with actual positional changes of the mandible after the debonding procedure. RESULTS: Nine SFA patients with mandibular setback surgery and six with advancement surgery were evaluated and significant mandibular changes from T0 to T1 and from T1 to T2 were observed. Negative correlation between horizontal surgical changes and postoperative horizontal changes was present in both groups. The difference between the predicted and actual amount of postoperative mandibular movement was significant in the mandibular advancement surgery group. CONCLUSION: Postoperative mandibular relapse appeared much larger in the mandibular advancement surgery group than in the setback group. Therefore, it is more important to consider the postoperative mandibular position change in mandibular advancement surgery in SFA.

Efficacy and safety of rhBMP/ß-TCP in alveolar ridge preservation: a multicenter, randomized, open-label, comparative, investigator-blinded clinical trial.

BACKGROUND: The aim of this multicenter, randomized, open-label, comparative, investigator-blinded study was to investigate the efficacy and safety of recombinant human bone morphogenetic protein 2 (rhBMP-2) combined with ß-TCP (rhBMP-2/ß-TCP) in alveolar ridge preservation. MATERIALS AND METHODS: Eighty-four subjects from three centers were enrolled in this clinical trial. After tooth extraction, rhBMP-2/ß-TCP (n = 41, test group) or ß-TCP (n = 43, control group) were grafted to the extraction socket with an absorbable barrier membrane for alveolar ridge preservation. Using computed tomography images obtained immediately after and 12 weeks after surgery, changes in the alveolar bone height and width were analyzed for each group and compared between the two groups. RESULTS: Both the test and control groups showed a significant decrease in alveolar bone height in the 12 weeks after surgery (both groups, p < 0.0001). However, the test group exhibited a significantly lower decrease in alveolar bone height than the control group (p = 0.0004). Alveolar bone width also showed significantly less resorption in the test group than in the control group for all extraction socket levels (ESL) (p = 0.0152 for 75% ESL; p < 0.0001 for 50% ESL; p < 0.0001 for 25% ESL). There were no statistically significant differences in the incidence of adverse events between the two groups. No severe adverse events occurred in either group. CONCLUSIONS: The results of this study suggest that rhBMP-2/ß-TCP is a safe graft material that provides a high alveolar bone preservation effect in patients receiving dental extraction. TRIAL REGISTRATION: Clinicaltrials.gov , NCT02714829 , Registered 22 March 2016.

Effect of Bone Buttressing at the Vertical Osteotomy Site on Postoperative Stability After Mandibular Setback Surgery.

ABSTRACT: This study aimed to assess the effect of bone buttressing at the vertical osteotomy site on postoperative stability after mandibular setback surgery and determine factors contributing to postoperative relapse. This retrospective study was conducted on patients who received mandibular setback surgery using bilateral sagittal split ramus osteotomy. Patients were divided into two groups: group I, intimate bony contact, and group II, bony gap of 2 mm or more. Using lateral cephalograms taken before surgery, 1 week after surgery, and 6 months after surgery, surgical changes, and postoperative relapse were compared between 2 groups. To assess associations between postoperative relapse and other variables, Pearson correlation analysis and multiple linear regression analysis were performed. Twenty-eight patients were evaluated (17 in group I and 11 in group II). Mean relapse was greater in group II (1.8 mm) than in group I (1.2 mm), although there were no significant differences between 2 groups (P = 0.203). Postoperative relapse was significantly associated with intraoperative clockwise rotation of the proximal segment (P < 0.001) and the amount of mandibular setback (P = 0.038). Bony gap was only correlated with postoperative counterclockwise rotation of the proximal segment (P = 0.014). In the regression analysis, intraoperative clockwise rotation of the proximal segment significantly predicted postoperative relapse (P < 0.001, R2 = 0.388). The absence of bone buttressing at the vertical osteotomy site may not significantly affect postoperative stability after mandibular setback surgery, and it is important to minimize intraoperative clockwise rotation of the proximal segment for better postoperative stability.

Effect of rhBMP-2 applied with a 3D-printed titanium implant on new bone formation in rabbit calvarium

Abstract Objective This study sought to compare the biocompatibility of a three-dimensional (3D)-printed titanium implant with a conventional machined titanium product, as well as the effect of such implant applied with recombinant human Bone Morphogenetic Protein Type 2 (rhBMP-2) for guided bone regeneration. Methodology Disk-shaped titanium specimens fabricated either by the conventional machining technique or by the 3D-printing technique were compared by MC3T3-E1 cells cytotoxicity assay. New bone formation was evaluated using a rapid prototype titanium cap applied to the calvaria of 10 rabbits, which were divided into two groups: one including an atelopeptide collagen plug on one side of the cap (group I) and the other including a plug with rhBMP-2 on the other side (group II). At six and 12 weeks after euthanasia, rabbits calvaria underwent morphometric analysis through radiological and histological examination. Results Through the cytotoxicity assay, we identified a significantly higher number of MC3T3-E1 cells in the 3D-printed specimen when compared to the machined specimen after 48 hours of culture. Moreover, morphometric analysis indicated significantly greater bone formation at week 12 on the side where rhBMP-2 was applied when evaluating the upper portion immediately below the cap. Conclusion The results suggest that 3D-printed titanium implant applied with rhBMP-2 enables new bone formation.

Changes in the temporomandibular joint clicking and pain disorders after orthognathic surgery: Comparison of orthodontics-first approach and surgery-first approach.

The purposes of this study were to investigate the influence of the orthodontics-first approach (OFA) and surgery-first approach (SFA) on changes in the signs and symptoms of temporomandibular joint disorders (TMDs) and to compare pre- and postoperative orthodontic treatment duration and total treatment duration between the two approaches. This retrospective study recruited 182 adult patients with malocclusions treated with OFA and SFA and recorded variables such as age, gender, skeletal classification, and signs and symptoms of TMD (clicking and pain disorders) before the start of the surgical-orthodontic treatment and after surgery. Changes in the signs and symptoms of TMD and treatment duration were evaluated within each approach and compared between two approaches. A binary logistic regression was performed to assess the influence of the variables on the postoperative signs and symptoms of TMD. There were no significant postoperative changes in temporomandibular joint (TMJ) pain for OFA and SFA, whereas a significant reduction was found in TMJ clicking after surgery for both approaches. According to binary logistic regression, the type of surgical-orthodontic treatment (OFA or SFA) was not a significant risk factor for postoperative TMJ clicking and pain, and the risk of postoperative TMJ clicking and pain was significant only when TMJ clicking (OR = 10.774, p < 0.001) and pain (OR = 26.876, p = 0.008) existed before the start of the entire treatment, respectively. With regard to the treatment duration, SFA (21.1 ± 10.3 months) exhibited significantly shorter total treatment duration than OFA (34.4 ± 11.9 months) (p < 0.001). The results of this study suggest that surgical-orthodontic treatment using SFA can be a feasible option of treatment for dentofacial deformities based on the equivalent effect on TMD and shorter overall treatment period compared to conventional surgical-orthodontic treatment using OFA.

Comparison of postoperative condylar changes after unilateral sagittal split ramus osteotomy and bilateral sagittal split ramus osteotomy using 3-dimensional analysis.

OBJECTIVE: This study aimed to evaluate postoperative changes in the condyle after unilateral sagittal split ramus osteotomy (USSRO) and to compare them with changes occurring after bilateral sagittal split ramus osteotomy (BSSRO). STUDY DESIGN: For 50 condyles from 25 patients, positional and volumetric changes of condyle were analyzed by using computed tomography images taken before, immediately after, and 6 months after surgery and compared between the USRRO and BSSRO groups. RESULTS: The condyle showed lateral and inferior displacement immediately after surgery and medial and superior movement at 6 months after surgery in the USSRO and BSSRO groups. No statistically significant difference was found between the 2 groups in the time-course positional change and rotation of the condyle. In the comparison of bodily shift and rotation between operated and nonoperated sides in USSRO group, there were no significant differences between the 2 sides, except for the perioperative rotation pattern on the coronal plane. At 6 months after surgery, the changed volume relative to preoperative condylar volume was only 5.2% in the USSRO group and 2.7% in the BSSRO group. CONCLUSIONS: The findings from this study suggest that USSRO can be used effectively in appropriately selected patients; however, temporomandibular joint (TMJ) problems may arise when condylar displacement is excessive enough to exceed physiologic tolerances.

Evaluation of Bone Remodeling After Simultaneous Sagittal Split Ramus Osteotomy and Mandibular Angle Ostectomy in Patients With Mandibular Prognathism.

PURPOSE: The present study assessed the postoperative bone remodeling after simultaneous sagittal split ramus osteotomy (SSRO) and mandibular angle ostectomy using a 3-dimensional analysis of computed tomography (CT) data. MATERIALS AND METHODS: We designed and implemented a retrospective study that included patients who had undergone SSRO with (study group) or without (control group) mandibular angle ostectomy. Using CT data taken immediately after (T1) and 6 months (T2) after surgery, the vertical and horizontal morphologic changes of the mandibular angle were evaluated and compared between the 2 groups. In the study group, the volumetric changes of the mandibular angle were assessed, and the bone regeneration rate was calculated. RESULTS: A total of 58 mandibular angles were evaluated (32 in the study group and 26 in the control group). The study group exhibited significantly greater vertical bone regrowth at the middle and posterior regions of the mandibular angle ostectomy line compared with that in the control group (middle, P < .001; posterior, P < .001). Both groups showed significant horizontal bone regrowth at 6 months postoperatively (P < .01). In the study group, the postoperative vertical bone regrowth was significantly associated with the extent of exposed bone below the angle ostectomy line at T1 for all regions (P < .001). The percentage of postoperative regenerated bone volume relative to the volume of bone removed intraoperatively was 41.8%. CONCLUSIONS: The present findings suggest that significant bone regrowth could occur after mandibular angle ostectomy with simultaneous SSRO. Therefore, it is necessary to consider bone remodeling patterns in the treatment planning stage for better and more predictable surgical outcomes.

Comparative Effectiveness of Surface Functionalized Poly-ε-Caprolactone Scaffold and ß-TCP Mixed PCL Scaffold for Bone Regeneration.

Physio-chemical surface properties to biomaterial has been attention in tissue engineering due to their properties on cell adhesion, proliferation, and differentiation. The object of this study is to evaluate the preosteoblast biological response on physio-chemical surface-layered 3D PCL scaffold and 3D PCL/ß-TCP scaffold. 3D scaffolds were fabricated by FDM 3D printing. Physio-chemical surface of 3D scaffolds were prepared by oxygen plasma and amine plasma-polymerization, respectively. The results of this study demonstrated that amine plasma-treated 3D scaffold on adhesion, proliferation, and osteogenic differentiation of the MC3T3-E1 was significantly increased compared to the other scaffolds.

Effect of Gellan Gum/Tuna Skin Film in Guided Bone Regeneration in Artificial Bone Defect in Rabbit Calvaria.

It is necessary to prevent the invasion of soft tissue into bone defects for successful outcomes in guided bone regeneration (GBR). For this reason, many materials are used as protective barriers to bone defects. In this study, a gellan gum/tuna skin gelatin (GEL/TSG) film was prepared, and its effectiveness in bone regeneration was evaluated. The film exhibited average cell viability in vitro. Experimental bone defects were prepared in rabbit calvaria, and a bone graft procedure with beta-tricalcium phosphate was done. The film was used as a membrane of GBR and compared with results using a commercial collagen membrane. Grafted material did not show dispersion outside of bone defects and the film did not collapse into the bone defect. New bone formation was comparable to that using the collagen membrane. These results suggest that the GEL/TSG film could be used as a membrane for GBR.

Orbicularis oris muscle reconstruction and cheiloplasty with Z-plasty in a patient with a transverse facial cleft.

BACKGROUND: Transverse facial clefts are Tessier's number 7 facial cleft among numbers 1-15 in Tessier's classification of craniofacial malformations, which varies from a simple widening oral commissure to a complete fissure extending towards the external ear. CASE PRESENTATION: In a patient with a transverse facial cleft, to functionally arrange the orbicularis oris muscle and form the oral commissure naturally, we performed a surgical procedure including orbicularis oris muscle reconstruction and cheiloplasty with Z-plasty. CONCLUSION: We achieved good results functionally and esthetically by orbicularis oris muscle reconstruction and cheiloplasty with Z-plasty. The surgical modality of our anatomical repair and 3 months follow-up results are presented.

A retrospective clinical investigation for the effectiveness of closed reduction on nasal bone fracture.

BACKGROUND: The nasal bone is the most protruding bony structure of the facial bones. Nasal bone fracture is the most common facial bone fracture. The high rate of incidence of nasal bone fracture emphasizes the need for systematical investigation of epidemiology, surgical techniques, and complications after surgery. The objective of this study is to investigate the current trends in the treatment of nasal bone fractures and the effectiveness of closed reduction depending on the severity of the nasal bone fracture. PATIENTS AND METHODS: A total of 179 patients with a nasal bone fracture from 2009 to 2017 were enrolled. Their clinical examination, patient's records, and radiographic images of nasal bone fractures were evaluated. RESULTS: Patients ranged from children to elderly. There were 156 (87.2%) males and 23 (12.8%) females. Traffic accident (36.9%) was the most common cause of nasal fracture. Orbit fracture (44 patients, 24.6%) was the most common fracture associated with a nasal bone fracture.Complications after surgery included postoperative deformity in 20 (11.2%) patients, nasal obstruction in 11 (6.1%) patients, and olfactory disturbances in 2 (1.1%) patients and patients with more severe nasal bone fractures had higher rates of these complications. CONCLUSION: Closed reduction could be performed successfully within 2 weeks after injury.

Clear Aligner Use Following Surgery-First Mandibular Prognathism Correction.

This case report introduces a treatment in mandibular prognathism correction by combining the surgery-first (SF) approach and clear aligners. An intraoral scanner (TRIOS 3, 3Shape, Copenhagen, Denmark) and a virtual setup program (OrthoAnalyzer, 3Shape) were used for treatment simulation. All clear aligners were fabricated using a 3-dimensional printer. The total treatment was completed within 3 months after surgery. An immediate improvement of the facial profile was obtained using the SF approach, and rapid and esthetic tooth movement was achieved using clear aligners. This case report demonstrated that the combination of the SF approach and clear aligners could be a patient-oriented surgical-orthodontic treatment method.