ABSTRACT
Controlling the rotation of carbon-carbon bonds, which is ubiquitous in organic molecules, to create functionality has been a subject of interest for a long time. In this context, it would be interesting to explore whether cooperative and collective rotation could occur if dipolar molecular rotors were aligned close together while leaving adequate space for rotation. However, it is difficult to realize such structures as bulk molecular assemblies, since molecules generally tend to assemble into the closest packing structure to maximize intermolecular forces. To tackle this question, we examined an approach using a supramolecular scaffold composed of a tripodal triptycene, which has been demonstrated to strongly promote the assembly of various molecular and polymer units into regular "2D hexagonal packing + 1D layer" structures. We found that a molecule (1) consisting of a dipolar 1,2-difluorobenzene rotor sandwiched by two 10-ethynyl-1,8,13-tridodecyloxy triptycenes, successfully self-assembles into the desired structure, where the dipolar rotor units align two-dimensionally at a close interval of approximately 0.8 nm while having a degree of freedom for rotational motion. Here we describe the self-assembly behavior of 1 in comparison with the general trend in molecular self-assembly, as well as the motility of the two-dimensionally aligned molecular rotors investigated using solid-state 19F-MAS NMR spectroscopy.
ABSTRACT
We have found an efficient adsorption feature provided by an NaCaA-85 zeolite for N2O even at 298 K and at lower pressures: N2O adsorption capacities of 1.33 mmol g-1 and 4.69 mmol g-1 under respective pressures of 0.3 and at 100 Torr, respectively, indicating the best performance among adsorbent materials so far reported. These adsorption peculiarities will pave a new way for developing excellent materials working for adsorption/separation processes of N2O.
ABSTRACT
Sulfide-based solid electrolytes with high Li+ conductivity, such as Li3PS4, are key materials for the realization of all-solid-state Li+ batteries. One approach to achieving high Li+ conductivity is to combine crystalline-phase stabilization at high temperatures with the introduction of defects at room temperature. In this work, this approach was verified by codoping Li3PS4 with two kinds of divalent cations. The resulting structural changes were comprehensively investigated both experimentally and computationally. The high-temperature ß-Li3PS4 phase of Li3PS4 could be stabilized at room temperature by adjusting the amount of Ca or Ba doping. The synthesized samples doped with divalent cations were found to have conductivities about 2 orders of magnitude higher than that of the γ-Li3PS4 phase at room temperature. The resultant Li+ conductivity at room temperature was also higher than that expected from interpolation of results for nondoped ß-Li3PS4. It is believed that the structural changes produced by the divalent cation doping contribute to this increase in conductivity. The stability of the ß-Li3PS4 phase with divalent cation doping was also demonstrated using density-functional-theory calculations for models with equivalent compositions to the synthesized samples. The Li+ positions obtained by structural optimization calculations showed the presence of diverse and disordered Li sites in the Ca-doped lattice. Such structural changes can contribute to cascade processes involving Li+ collisions, referred to as the "billiard-ball" mechanism, which cannot occur in nondoped ß-Li3PS4. This series of experiments involving the synthesis and analyses of ß-Li3PS4 with divalent cation doping provides a way to enhance Li+ conductivity through structural modification and optimization.
ABSTRACT
Here, an unprecedented phenomenon in which 7-coordinate lanthanide metallomesogens, which align via hydrogen bonds mediated by coordinated H2O molecules, form micellar cubic mesophases at room temperature, creating body-centered cubic (BCC)-type supramolecular spherical arrays, is reported. The results of experiments and molecular dynamics simulations reveal that spherical assemblies of three complexes surrounded by an amorphous alkyl domain spontaneously align in an energetically stable orientation to form the BCC structure. This phenomenon differs greatly from the conventional self-assembling behavior of 6-coordinated metallomesogens, which form columnar assemblies due to strong intermolecular interactions. Since the magnetic and luminescent properties of different lanthanides vary, adding arbitrary functions to spherical arrays is possible by selecting suitable lanthanides to be used. The method developed in this study using 7-coordinate lanthanide metallomesogens as building blocks is expected to lead to the rational development of micellar cubic mesophases.
ABSTRACT
Hydrogen-bonded supermacrocycles (rosettes) composed of dinaphthylethene π-conjugated systems show unique supramolecular polymorphism affording nanorings and nanorods via kinetically controlled self-assembly. Molecular modeling and molecular dynamics simulations proposed that conformational isomerism of the π-conjugated systems leads to planar and convex rosette geometries, which results in their distinct stacking arrangements.
ABSTRACT
Polymorphism, a phenomenon whereby disparate self-assembled products can be formed from identical molecules, has incited interest in the field of supramolecular polymers. Conventionally, the monomers that constitute supramolecular polymers are engineered to facilitate one-dimensional aggregation and, consequently, their polymorphism surfaces primarily when the states of assembly differ significantly. This engenders polymorphs of divergent dimensionalities such as one- and two-dimensional aggregates. Notwithstanding, realizing supramolecular polymer polymorphism, wherein polymorphs maintain one-dimensional aggregation, persists as a daunting challenge. In this work, we expound upon the manifestation of two supramolecular polymer polymorphs formed from a large discotic supramolecular monomer (rosette), which consists of six hydrogen-bonded molecules with an extended π-conjugated core. These polymorphs are generated in mixtures of chloroform and methylcyclohexane, attributable to distinctly different disc stacking arrangements. The face-to-face (minimal displacement) and offset (large displacement) stacking arrangements can be predicated on their distinctive photophysical properties. The face-to-face stacking results in a twisted helix structure. Conversely, the offset stacking induces inherent curvature in the supramolecular fiber, thereby culminating in a hollow helical coil (helicoid). While both polymorphs exhibit bistability in nonpolar solvent compositions, the face-to-face stacking attains stability purely in a kinetic sense within a polar solvent composition and undergoes conversion into offset stacking through a dislocation of stacked rosettes. This occurs without the dissociation and nucleation of monomers, leading to unprecedented helicoidal folding of supramolecular polymers. Our findings augment our understanding of supramolecular polymer polymorphism, but they also highlight a distinctive method for achieving helicoidal folding in supramolecular polymers.
ABSTRACT
The seven-coordinate Ho(III) aqua-tris(dibenzoylmethane)(DBM) complex, referred to as Ho-(DBM)3·H2O, was first reported in the late 1960s. It has a threefold symmetric structure, with Ho at the center of three dibenzoylmethane ligands and hydrogen-bonded water to ligands. It is considered that the hydrogen bonds between the water molecule and the ligands surrounding Ho play an important role in the formation of its symmetrical structure. In this work, we developed new force-field parameters for classical molecular dynamics (CMD) simulations to theoretically elucidate the structure and dynamics of Ho-(DBM)3·H2O. To develop the force field, structural optimization and molecular dynamics were performed on the basis of ab initio calculations using the plane-wave pseudopotential method. The force-field parameters for CMD were then optimized to reproduce the data obtained from ab initio calculations. Validation of the developed force field showed good agreement with the experimental crystalline structure and ab initio data. The vibrational properties of water in Ho-(DBM)3·H2O were investigated by comparison with bulk liquid water. The vibrational motion of water was found to have a characteristic mode originating from stationary rotational motion along the c-axis of Ho(III) aqua-tris(dibenzoylmethane). Contrary to expectations, the hydrogen-bond dynamics of water in Ho-(DBM)3·H2O were found to be almost equivalent to those of bulk liquid water except for librational motion. This development route for force-field parameters for CMD and the establishment of water dynamics can advance the understanding of water-coordinated metal complexes with high coordination numbers such as Ho-(DBM)3·H2O.
ABSTRACT
Aggregation of humic acids (HAs) was studied by small-angle neutron and X-ray scattering techniques. The combination of these techniques enables us to examine the aggregation structures of HA particles. Two HAs with distinctive compositions were examined: a commercial HA (PAHA) and a HA extracted from deep sedimentary groundwater (HHA). While macroscopic coagulation tests showed that these HAs were stable in solutions except for HHA at pH < 6, small-angle neutron scattering (SANS) and small-angle X-ray scattering (SAXS) revealed that they formed aggregates with sizes exceeding the sub-micrometer length scale. The SAXS curves of PAHA remarkably varied with pD = log aD+, where aD+ stands for the activity of deuterium ions, whereas the SANS curves did not. With the help of theoretical fittings, it was revealed that PAHA aggregates consisted of two domains: poorly hydrated cores and well-hydrated proton-rich shells. The cores were (dis)aggregated with pD inside the aggregates of the shells. The SANS and SAXS curves of HHA resembled each other, and their intensities at low q, where q stands for the scattering vector, increased with a decrease of pD, indicating the formation of homogeneous aggregates within the spatial resolutions of SANS and SAXS. This study revealed that distinctive aggregation behaviors exist in humic substances with nm-scale heterogeneous structures like PAHA, which is important for their roles in the fate of contaminants or nutrients in aqueous environments.
Subject(s)
Humic Substances , Neutron Diffraction , Scattering, Small Angle , X-Rays , Neutron Diffraction/methods , X-Ray DiffractionABSTRACT
Structural determination of adsorbed atoms on layered structures such as clay minerals is a complex subject. Radioactive cesium (Cs) is an important element for environmental conservation, so it is vital to understand its adsorption structure on clay. The nuclear magnetic resonance (NMR) parameters of 133Cs, which can be determined from solid-state NMR experiments, are sensitive to the local neighboring structures of adsorbed Cs. However, determining the Cs positions from NMR data alone is difficult. This paper describes an approach for identifying the expected atomic positions on clay minerals by combining machine learning (ML) with experimentally observed chemical shifts. A linear ridge regression model for ML is constructed from the smooth overlap of atomic position descriptor and gauge-including projector augmented wave (GIPAW) ab initio data. The constructed ML model predicts the GIPAW data to within a 3 ppm root-mean-squared error. At this stage, the 133Cs chemical shifts can be instantaneously calculated from the Cs positions on any clay layers using ML. The inverse analysis, which derives the atomic positions from experimentally observed chemical shifts, is developed from the ML model. The input data for the inverse analysis are the layer structure and the experimentally observed chemical shifts. The Cs positions for the targeted chemical shifts are then output. Inverse analysis is applied to montmorillonite, and the resultant Cs positions are found to be consistent with previous results (Ohkubo, T.; et al. J. Phys. Chem. A 2018, 122, 9326-9337). The Cs positions on saponite clay are also clarified from experimentally observed chemical shifts and inverse analysis.
ABSTRACT
The adsorption of the nitrate ion by the cylindrical pore of single-walled carbon nanotubes (SWCNT) was found to be aided by an acidic adsorbed layer. Adsorbed water in the vicinity of the pore wall can supply protons through ionization, forming the acidic layer, according to Raman spectra and results of solution pH fluctuations caused by ion species adsorption. Such an acidic adsorbed layer leads to surplus adsorption of anionic species where the adsorbed amount of nitrate ions is much larger than that of cations. Also, we could observe the Raman bands being assignable to the symmetrical stretching mode at an extremely high-frequency region for nano-restricted nitrate ions compared to any other bulk phases. The abnormal band shift of adsorbed nitrate ions indicates that the nitrate ions are confined in the pore under the effects of nanoconfinement by the pore and the strong interaction with the acidic layer in the pore. Our results warn that we have to construct the adsorption model of aqueous electrolytes confined in carbon pores by deliberating the acid layer formed by the adsorbed water.
ABSTRACT
Lithium thiophosphate electrolyte is a promising material for application in all-solid-state batteries. Ab initio molecular dynamics (AIMD) simulations have been used to investigate the ion conduction mechanisms in single-crystalline and glassy compounds. However, the complexity of real materials (e.g., materials with grain boundaries and multiphase glass-ceramics) causes AIMD simulations to have high computational cost. To overcome this computational limitation, we developed a new interatomic potential for classical molecular dynamics (CMD) simulations of Li solid-state electrolytes. The training datasets were generated from representative sulfide electrolytes (ß-Li3PS4, γ-Li3PS4, Li4P2S6, Li7P3S11, and Li7PS6 crystals and 70Li2S-30P2S5 glass). Using the functional forms of the Class II and Stillinger-Weber potentials, all parameters were optimized by minimizing the differences in forces on atoms, stresses, and potential energies between the CMD and AIMD results. Subsequent validation showed that the optimized parameters can reproduce the dynamics of Li+ as well as the structures of the crystalline and glassy materials. The ionic conductivity of Li7P3S11 crystal was approximately five times that of the isostoichiometric 70Li2S-30P2S5 glass, indicating that CMD simulations using the developed force-field accurately reproduced the effective conduction path in Li7P3S11 from AIMD. The developed force-field parameters make it possible to simulate complex materials including amorphous-crystalline interfaces and multiphase glass-ceramics in the CMD framework.
ABSTRACT
Li7P3S11 glass ceramics have high conductivities competitive with liquid electrolytes, making them good candidates as solid-state electrolytes for all-solid-state lithium-ion batteries. However, the metastable nature and performance of Li7P3S11 glass ceramics remain mysterious. Herein, modified Li7P3S11 glass ceramics with compositions of 70Li2S-30P2S5 were prepared via two-step mechanical milling and thermal annealing. Li7P3S11 glass ceramics synthesized using the conventional method (mechanical milling and thermal annealing) were again ball-milled to obtain amorphous 70Li2S-30P2S5 with a peculiar glass structure. Further thermal annealing was carried out to crystallize the glass. The obtained crystalline phase was analogous to the original Li7P3S11 phase, but the conductivity was enhanced by a factor of 1.7. Based on 31P solid-state nuclear magnetic resonance (NMR) spectroscopy, the Li7P3S11 phase contained an additional PS43- unit. A rational deconvolution procedure for the 31P solid-state NMR spectra based on crystalline Li7P3S11 was developed and applied to the samples. The analysis can resolve the additional crystalline PS43- unit in the Li7P3S11 structure. Based on two-dimensional double-quantum 31P NMR spectroscopy, the additional PS43- unit is located adjacent to the P2S74- unit, suggesting that P2S74- is divided into two PS43- units in the Li7P3S11 phase. The flip motion of Li+ was also investigated based on the 7Li spin-lattice relaxation time. The independent activation energy of spin-lattice relaxation with respect to temperature in the Li7P3S11 phase was attributed to a conduction path between the two PS43- units. The findings provide a synthetic route that can be used to develop metastable solid-state electrolytes.
ABSTRACT
Amorphous materials with non-periodic structures are commonly evaluated based on their chemical composition, which is not always the best parameter to evaluate physical properties, and an alternative parameter more suitable for performance evaluation must be considered. Herein, we quantified various structural and physical properties of Ce-doped strontium borate glasses and studied their correlations by principal component analysis. We found that the density-driven molar volume is suitable for the evaluation of structural data, while chemical composition is better for the evaluation of optical and luminescent data. Furthermore, the borate-rich glasses exhibited a stronger luminescence due to Ce3+, indicating a higher fraction of BO3/2 ring and larger cavity. Moreover, the internal quantum efficiency was found to originate from the local coordination states of the Ce3+ centres, independent of composition or molar volume. The comparison of numerical data of the matrix is useful not only for ensuring the homogenous doping of amorphous materials by activators, but also for determining the origin of physical properties.
ABSTRACT
Transparent low-melting inorganic glass is an attractive industrial material based on its high thermal and light resistance compared with conventional engineering plastics. If the melting temperature of inorganic glass could be decreased, the doping of guest materials or compression moulding on the glass surface would be easier. Although phosphate glass is considered as a potential candidate because of its transparency in the visible region and low-melting behaviour, water durability often becomes a problem for implementation. Here, we prepared inorganic low-melting phosphate glass at a temperature of 500 °C via a melting and quenching methodology. It was found that tin-doped phosphate glasses exhibited higher thermal and light resistance properties than polycarbonates. Colourless transparent oxide glasses without organic components are capable of bringing about new possibilities for the application of inorganic glasses.
ABSTRACT
A large relative surface area is crucial for high catalytic activity. Monolithic catalysts are important catalytic materials because of minimal self-degradation. Regarding large surface area catalysts, the glass-ceramics (GCs) with high formability, obtained by heat-treatment of the precursor glass, are plausible candidates. This study examines the photocatalytic behaviour of porous GCs obtained after acid leaching of MgO-TiO2-P2O5 GCs. After heat-treatment, anatase TiO2 was precipitated along with other phases. The diffraction intensity ratio between anatase and other phases was the maximum for a heat-treatment temperature of 900 °C. After acid leaching of the GCs, the relative surface area decreased with increasing TiO2 fraction; the surface area was also affected by the sample morphology. H2 generation was observed from porous GCs, while GCs without etching exhibited approximately zero activity. Thus, it was demonstrated that high surface area and prevention of the reduction reaction to Ti(III) are important for tailoring monolithic photocatalytic materials.
ABSTRACT
The 70Li2S-30P2S5 glass is a promising solid-state electrolyte for all solid-state lithium-ion batteries. Nevertheless, understanding the Li+ conduction mechanism is limited because of the complex amorphous nature of the glass. Herein, we present an ab initio molecular dynamics study of the 70Li2S-30P2S5 glass using a long simulation run (800 ps), improving the general understanding of its structure, dynamics, and electronic polarizability by comparing the results to those of the Li7P3S11 crystals. The shape difference of the P2S74- between the Li7P3S11 crystal and 70Li2S-30P2S5 glass is clearly observed in P-S-P bond angle, indicating that the P2S74- units in the 70Li2S-30P2S5 glass are relatively free from stress for crystallographic ordering. From the Li trajectories for 800 ps, the diffusion within the limited space in the unit cell is derived as the effective porosity. The lower effective porosity in the 70Li2S-30P2S5 glass compared to the Li7P3S11 crystal implies that a part of volume in the 70Li2S-30P2S5 glass cannot contribute to Li+ conduction. This reduction is attributed to the rotational motion of PS43-, which is observed only in the 70Li2S-30P2S5 glass. The sulfur polarizability is thoroughly analyzed for isotropic and anisotropic span through the Born effective charge tensor. The uniformly anisotropic polarizability of sulfur in the 70Li2S-30P2S5 glass is a characteristic property, which cannot create fast Li+ conduction paths as that in Li7P3S11 crystal.
ABSTRACT
In this study, porous boron nitride (p-BN) with hexagonal phase boron nitride (h-BN) pore walls was synthesized using high-temperature calcination. Negligible variation in pore-wall structure can be observed in powder X-ray diffraction (XRD) profiles and infrared (IR) spectra. However, a highly stable p-BN with a stable pore structure even at 973 K under the oxidative conditions is obtained when synthesized at higher than 1573 K under nitrogen gas flow. For p-BN, this stability is obtained by generating h-BN microcrystals. Nitrogen adsorption-desorption isotherms at 77 K provide type-IV features and typical adsorption-desorption hysteresis, which suggests micropore and mesopore formation. Moreover, adsorption-desorption isotherms of Ar at 87 K are measured and compared with those of nitrogen. The relative adsorbed amount of nitrogen (i.e., the amount of nitrogen normalized by that of Ar at each relative pressure or adsorption potential value) on p-BN is considerably larger than that on microporous carbon at low-pressure regions, which suggests the existence of strong adsorption sites on the p-BN surface. In fact, the relative number of adsorbed nitrogen molecules to that of Ar on p-BN is, at most, 150%-200% larger than that on microporous carbon for the same adsorption potential state. Furthermore, additional adsorption enhancement to nitrogen between P/P 0 = 10-5 and 10-3 can be observed for p-BN treated at 1673 K, which suggests the uniformly adsorbed layer formation of nitrogen molecules in the vicinity of a basal planar surface. Thus, unlike typical nanoporous sp2 carbons, p-BN materials have the potential to enhance adsorption for certain gas species because of their unique surface state.
ABSTRACT
The dominant oxidation state of cadmium is +ii. Although extensive investigations into the +ii oxidation state have been carried out, the chemistry of CdI is still largely underdeveloped. Here, we report a new functionality of cadmium created by the zeolite lattice: room temperature O transfer from N2O to CO mediated by the nearest monovalent cadmium ions in MFI zeolite. Thermal activation of CdII ion-exchanged MFI zeolite in vacuo affords the diamagnetic [CdI-CdI]2+ species with a short CdI-CdI σ bond (2.67 Å). This species generates two CdIË sites under UV irradiation through homolytic cleavage of the CdI-CdI σ bond, and the thus-formed nearest CdIË sites abstract an O atom from N2O to generate the [CdII-Ob-CdII]2+ core, where Ob means bridged oxygen. This bridging atomic oxygen species is transferred to CO at room temperature, through which CO oxidation and regeneration of the CdI-CdI σ bond then proceed. This is the first example pertaining to the reversible redox reactivity of the nearest monovalent cadmium ions toward stable small molecules. In situ spectroscopic characterization captured all the intermediates in the reaction processes, and these data allowed us to calibrate the density-functional-theory cluster calculations, by means of which we were able to show that the charge compensation requirement at the nearest two Al sites arrayed circumferentially in the 10-membered ring of MFI zeolite creates such novel functionalities of cadmium. The unprecedented reactivity of CdI and its origin are discussed.
ABSTRACT
Oxygenase reactivity toward selective partial oxidation of CH4 to CH3OH requires an atomic oxygen-radical bound to metal (M-Oâ¢: oxyl intermediate) that is capable of abstracting an H atom from the significantly strong C-H bond in CH4. Because such a reaction is frequently observed in metal-doped zeolites, it has been recognized that the zeolite provides an environment that stabilizes the M-O⢠intermediate. However, no experimental data of M-O⢠have so far been discovered in the zeolite; thus, little is known about the correlation among the state of M-Oâ¢, its reactivity for CH4, and the nature of the zeolite environment. Here, we report a combined spectroscopic and computational study of the room-temperature activation of CH4 over ZnII-O⢠in the MFI zeolite. One ZnII-O⢠species does perform H-abstraction from CH4 at room temperature. The resultant CH3⢠species reacts with the other ZnII-O⢠site to form the ZnII-OCH3 species. The H2O-assisted extraction of surface methoxide yields 29 µmol g-1 of CH3OH with a 94% selectivity. The quantum mechanics (QM)/molecular mechanics (MM) calculation determined the central step as the oxyl-mediated hydrogen atom transfer which requires an activation energy of only 10 kJ mol-1. On the basis of the findings in gas-phase experiments regarding the CH4 activation by the free [M-Oâ¢]+ species, the remarkable H-abstraction reactivity of the ZnII-O⢠species in zeolites was totally rationalized. Additionally, the experimentally validated QM/MM calculation revealed that the zeolite lattice has potential as the ligand to enhance the polarization of the M-O⢠bond and thereby enables to create effectively the highly reactive M-O⢠bond required for low-temperature activation of CH4. The present study proposes that tuning of the polarization effect of the anchoring site over heterogeneous catalysts is the valuable way to create the oxyl-based functionality on the heterogeneous catalyst.