Clinical characteristics and antimicrobial susceptibility of Fusobacterium species isolated over 10 years at a Japanese university hospital.

PURPOSE: Anaerobic bacteria, existing on human skin and mucous membranes, can cause severe infections with complications or mortality. We examined the clinical characteristics of patients infected with Fusobacterium spp. and assessed their antibiotic susceptibility. METHODS: Clinical data were collated from patients diagnosed with Fusobacterium infections in a Japanese university hospital between 2014 and 2023. Antibiotic susceptibility tests were conducted following the Clinical and Laboratory Standards Institute guidelines. RESULTS: We identified 299 Fusobacterium isolates. The median age was 61 years (range, 14-95 years), with females constituting 43.1% of the patients. Most infections were community-acquired (84.6%, 253/299). Multiple bacterial strains were isolated simultaneously in 74.6% of cases. One-fourth of the patients had solid organ malignancies (25.4%, 76/299), and 14.5% (11/76) of those had colorectal cancer. The 30-day mortality rate was 1.3%. Fusobacterium species were isolated from blood cultures in 6% (18/299) of the patients. Patients, aged 75 years or older, with cerebrovascular disease or hematologic malignancy exhibited significantly higher prevalence of blood culture isolates in univariate analysis. Each Fusobacterium species had its characteristic infection site. Approximately 5% F. nucleatum and F. necrophorum isolates showed penicillin G resistance. Moxifloxacin resistance was observed in varying degrees across strains, ranging from 4.6 to 100% of isolates. All isolates were sensitive to ß-lactam/ß-lactamase inhibitors, carbapenems, and metronidazole. CONCLUSION: We show a link between Fusobacterium species and solid organ malignancies. We observed resistance to penicillin, cefmetazole, clindamycin, and moxifloxacin, warranting caution in their clinical use. This study offers valuable insights for managing Fusobacterium infections and guiding empirical treatments.

Anion-Induced Interfacial Liquid Layers on LiCoO2 in Salt-in-Water Lithium-Ion Batteries.

The incompatibility of lithium intercalation electrodes with water has impeded the development of aqueous Li-ion batteries. The key challenge is protons which are generated by water dissociation and deform the electrode structures through intercalation. Distinct from previous approaches utilizing large amounts of electrolyte salts or artificial solid-protective films, we developed liquid-phase protective layers on LiCoO2 (LCO) using a moderate concentration of 0.5∼3 mol kg-1 lithium sulfate. Sulfate ion strengthened the hydrogen-bond network and easily formed ion pairs with Li+, showing strong kosmotropic and hard base characteristics. Our quantum mechanics/molecular mechanics (QM/MM) simulations revealed that sulfate ion paired with Li+ helped stabilize the LCO surface and reduced the density of free water in the interface region below the point of zero charge (PZC) potential. In addition, in situ electrochemical surface-enhanced infrared absorption spectroscopy (SEIRAS) proved the appearance of inner-sphere sulfate complexes above the PZC potential, serving as the protective layers of LCO. The role of anions in stabilizing LCO was correlated with kosmotropic strength (sulfate > nitrate > perchlorate > bistriflimide (TFSI-)) and explained better galvanostatic cyclability in LCO cells.

Spectroscopic studies for identifying the chemical states of the periostracum of the Corbicula species in Lake Biwa.

Corbicula clam shells consist of thin periostracum and calcareous layers made of calcium carbonate (CaCO3). Depending on habitat conditions, the shell exhibits various colorations, such as yellow, brown, and black. The chemical state of the periostracum of the Corbicula species in Lake Biwa was studied by X-ray absorption fine structure (XAFS) and Raman scattering spectroscopies. Fe K-edge X-ray absorption near edge structure (XANES) revealed that the Fe3+ intensity increases as the color of the shell changes from yellow to black. Raman spectra suggested that quinone-based polymers cover the yellow shell, and the black shell is further covered by dihydroxyphenylalanine (DOPA) rings of amino acid derivatives. From Fe K-edge extended X-ray absorption fine structure (EXAFS), it was found that Fe3+ in the periostracum was surrounded by five to six oxygen atoms with an average Fe-O ligand distance of 2.0 Å. Accordingly, a tris-DOPA-Fe3+ complex is formed, which is responsible for the periostracum's black color.

Degradation of Lignin by Infrared Free Electron Laser.

Lignin monomers have attracted attention as functional materials for various industrial uses. However, it is challenging to obtain these monomers by degrading polymerized lignin due to the rigid ether linkage between the aromatic rings. Here, we propose a novel approach based on molecular vibrational excitation using infrared free electron laser (IR-FEL) for the degradation of lignin. The IR-FEL is an accelerator-based pico-second pulse laser, and commercially available powdered lignin was irradiated by the IR-FEL under atmospheric conditions. Synchrotron-radiation infrared microspectroscopy analysis showed that the absorption intensities at 1050 cm-1, 1140 cm-1, and 3400 cm-1 were largely decreased alongside decolorization. Electrospray ionization mass chromatography analysis showed that coumaryl alcohol was more abundant and a mass peak corresponding to hydrated coniferyl alcohol was detected after irradiation at 2.9 µm (νO-H) compared to the original lignin. Interestingly, a mass peak corresponding to vanillic acid appeared after irradiation at 7.1 µm (νC=C and νC-C), which was supported by our two-dimensional nuclear magnetic resonance spectroscopy analysis. Therefore, it seems that partial depolymerization of lignin can be induced by IR-FEL irradiation in a wavelength-dependent manner.

Unexpectedly Large Contribution of Oxygen to Charge Compensation Triggered by Structural Disordering: Detailed Experimental and Theoretical Study on a Li3NbO4-NiO Binary System.

Dependence on lithium-ion batteries for automobile applications is rapidly increasing. The emerging use of anionic redox can boost the energy density of batteries, but the fundamental origin of anionic redox is still under debate. Moreover, to realize anionic redox, many reported electrode materials rely on manganese ions through π-type interactions with oxygen. Here, through a systematic experimental and theoretical study on a binary system of Li3NbO4-NiO, we demonstrate for the first time the unexpectedly large contribution of oxygen to charge compensation for electrochemical oxidation in Ni-based materials. In general, for Ni-based materials, e.g., LiNiO2, charge compensation is achieved mainly by Ni oxidation, with a lower contribution from oxygen. In contrast, for Li3NbO4-NiO, oxygen-based charge compensation is triggered by structural disordering and σ-type interactions with nickel ions, which are associated with a unique environment for oxygen, i.e., a linear Ni-O-Ni configuration in the disordered system. Reversible anionic redox with a small hysteretic behavior was achieved for LiNi2/3Nb1/3O2 with a cation-disordered Li/Ni arrangement. Further Li enrichment in the structure destabilizes anionic redox and leads to irreversible oxygen loss due to the disappearance of the linear Ni-O-Ni configuration and the formation of unstable Ni ions with high oxidation states. On the basis of these results, we discuss the possibility of using σ-type interactions for anionic redox to design advanced electrode materials for high-energy lithium-ion batteries.

Nanostructured LiMnO2 with Li3PO4 Integrated at the Atomic Scale for High-Energy Electrode Materials with Reversible Anionic Redox.

Nanostructured LiMnO2 integrated with Li3PO4 was successfully synthesized by the mechanical milling route and examined as a new series of positive electrode materials for rechargeable lithium batteries. Although uniform mixing at the atomic scale between LiMnO2 and Li3PO4 was not anticipated because of the noncompatibility of crystal structures for both phases, our study reveals that phosphorus ions with excess lithium ions dissolve into nanosize crystalline LiMnO2 as first evidenced by elemental mapping using STEM-EELS combined with total X-ray scattering, solid-state NMR spectroscopy, and a theoretical ab initio study. The integrated phase features a low-crystallinity metastable phase with a unique nanostructure; the phosphorus ion located at the tetrahedral site shares faces with adjacent lithium ions at slightly distorted octahedral sites. This phase delivers a large reversible capacity of ∼320 mA h g-1 as a high-energy positive electrode material in Li cells. The large reversible capacity originated from the contribution from the anionic redox of oxygen coupled with the cationic redox of Mn ions, as evidenced by operando soft XAS spectroscopy, and the superior reversibility of the anionic redox and the suppression of oxygen loss were also found by online electrochemical mass spectroscopy. The improved reversibility of the anionic redox originates from the presence of phosphorus ions associated with the suppression of oxygen dimerization, as supported by a theoretical study. From these results, the mechanistic foundations of nanostructured high-capacity positive electrode materials were established, and further chemical and physical optimization may lead to the development of next-generation electrochemical devices.

Elucidating Influence of Mg- and Cu-Doping on Electrochemical Properties of O3-Nax [Fe,Mn]O2 for Na-Ion Batteries.

Although O3-NaFe1/2 Mn1/2 O2 delivers a large capacity of over 150 mAh g-1 in an aprotic Na cell, its moist-air stability and cycle stability are unsatisfactory for practical use. Slightly Na-deficient O3-Na5/6 Fe1/2 Mn1/2 O2 (O3-Na5/6 FeMn) and O3-Na5/6 Fe1/3 Mn1/2 Me1/6 O2 (Me = Mg or Cu, O3-FeMnMe) are newly synthesized. The Cu and Mg doping provides higher moist-air stability. O3-Na5/6 FeMn, O3-FeMnCu, and O3-FeMnMg deliver first discharge capacities of 193, 176, and 196 mAh g-1 , respectively. Despite partial replacement of Fe with redox inactive Mg, oxide ions in O3-FeMnMg participate in the redox reaction more apparently than O3-Na5/6 FeMn. X-ray diffraction studies unveil the formation of a P-O intergrowth phase during charging up to >4.0 V.

Irradiation effect of a submillimeter wave from 420†GHz gyrotron on amyloid peptides in vitro.

On using the far-infrared radiation system, whether the irradiation effect is thermal or non-thermal is controversial. We irradiated amyloid peptides that are causal factors for amyloidosis by using a submillimeter wave from 420 GHz gyrotron. Fluorescence reagent assay, optical and electron microscopies, and synchrotron-radiation infrared microscopy showed that the irradiation increased the fibrous conformation of peptides at room temperature for 30 min. The temperature increase on the sample was only below 5 K, and a simple heating up to 318 K hardly induced the fibril formation. Therefore, the amyloid aggregation was driven by the far-infrared radiation with little thermal effect.

Sequential delithiation behavior and structural rearrangement of a nanoscale composite-structured Li1.2Ni0.2Mn0.6O2 during charge-discharge cycles.

Lithium- and manganese-rich layered oxides (LMRs) are promising positive electrode materials for next-generation rechargeable lithium-ion batteries. Herein, the structural evolution of Li1.2Ni0.2Mn0.6O2 during the initial charge-discharge cycle was examined using synchrotron-radiation X-ray diffraction, X-ray absorption spectroscopy, and nuclear magnetic resonance spectroscopy to elucidate the unique delithiation behavior. The pristine material contained a composite layered structure composed of Ni-free and Ni-doped Li2MnO3 and LiMO2 (M = Ni, Mn) nanoscale domains, and Li ions were sequentially and inhomogeneously extracted from the composite structure. Delithiation from the LiMO2 domain was observed in the potential slope region associated with the Ni2+/Ni4+ redox couple. Li ions were then extracted from the Li2MnO3 domain during the potential plateau and remained mostly in the Ni-doped Li2MnO3 domain at 4.8 V. In addition, structural transformation into a spinel-like phase was partly observed, which is associated with oxygen loss and cation migration within the Li2MnO3 domain. During Li intercalation, cation remigration and mixing resulted in a domainless layered structure with a chemical composition similar to that of LiNi0.25Mn0.75O2. After the structural activation, the Li ions were reversibly extracted from the newly formed domainless structure.

Improved Non-Grignard Electrolyte Based on Magnesium Borate Trichloride for Rechargeable Magnesium Batteries.

The high anodic stability of electrolytes for rechargeable magnesium batteries enables the use of new positive electrodes, which can contribute to an increase in energy density. In this study, novel Ph3COMgCl-, Ph3SiOMgCl-, and B(OMgCl)3-based electrolytes were prepared with AlCl3 in triglyme. The Ph3COMgCl-based electrolyte showed anodic stability over 3.0 V vs. Mg but was chemically unstable, whereas the Ph3SiOMgCl-based electrolyte was chemically stable but featured lower anodic stability than the Ph3COMgCl-based electrolyte. Advantageously, the B(OMgCl)3-based electrolyte showed both anodic stability over 3.0 V vs. Mg (possibly due to the Lewis acidic nature of B in B(OMgCl)3) and chemical stability (possibly due to the hard acid character of B(OMgCl)3). B(OMgCl)3, which was prepared by reacting boric acid with a Grignard reagent, was characterized by nuclear magnetic resonance (NMR) spectroscopy, Fourier-transform infrared spectroscopy (FTIR), and X-ray absorption spectroscopy (XAS). The above analyses showed that B(OMgCl)3 has a complex structure featuring coordinated tetrahydrofuran molecules. 27Al NMR spectroscopy and Al K-edge XAS showed that when B(OMgCl)3 was present in the electrolyte, AlCl3 and AlCl2+ species were converted to AlCl4-. Mg K-edge XAS showed that the Mg species in B(OMgCl)3-based electrolytes are electrochemically positive. As a rechargeable magnesium battery, the full cell using the B(OMgCl)3-based electrolyte and a Mo6S8 Chevrel phase cathode showed stable charge-discharge cycles. Thus, B(OMgCl)3-based electrolytes, the anodic stability of which can be increased to ~3 V by the use of appropriate battery materials, are well suited for the development of practical Mg battery cathodes.

Porous Metal-Organic Frameworks Containing Reversible Disulfide Linkages as Cathode Materials for Lithium-Ion Batteries.

Three porous disulfide-ligand-containing metal-organic frameworks (DS-MOFs) and two nonporous coordination polymers with disulfide ligands (DS-CPs) with various structural dimensionalities were used as cathode active materials in lithium batteries. Charge/discharge performance examinations revealed that only porous DS-MOF-based batteries exhibited significant capacities close to the theoretical values, which was ascribed to the insertion of electrolyte ions into the DS-MOFs. The insolubility of porous 3 D DS-MOFs in the electrolyte resulted in cycling performances superior to that of their 1 D and 2 D porous counterparts. Battery reactions were probed by instrumental analyses. The dual redox reactions of metal ions and disulfide ligands in the MOFs resulted in higher capacities, and the presence of reversible electrochemically dynamic S-S bonds stabilized the cycling performance. Thus, the strategy of S-S moiety trapping in MOFs and the obtained correlation between the structural features and battery performance could contribute to the design of high-performance MOF-based batteries and the practical realization of Li-S batteries.

Nanosize Cation-Disordered Rocksalt Oxides: Na2 TiO3 -NaMnO2 Binary System.

To realize the development of rechargeable sodium batteries, new positive electrode materials without less abundant elements are explored. Enrichment of sodium contents in host structures is required to increase the theoretical capacity as electrode materials, and therefore Na-excess compounds are systematically examined in a binary system of Na2 TiO3 -NaMnO2 . After several trials, synthesis of Na-excess compounds with a cation disordered rocksalt structure is successful by adapting a mechanical milling method. Among the tested electrode materials, Na1.14 Mn0.57 Ti0.29 O2 in this binary system delivers a large reversible capacity of ≈200 mA h g-1 , originating from reversible redox reactions of cationic Mn3+ /Mn4+ and anionic O2- /On - redox confirmed by X-ray absorption spectroscopy. Holes in oxygen 2p orbitals, which are formed by electrochemical oxidation, are energetically stabilized by electron donation from Mn ions. Moreover, reversibility of anionic redox is significantly improved compared with a former study on a binary system of Na3 NbO3 -NaMnO2 tested as model electrode materials.

Degradation Mechanism of Conversion-Type Iron Trifluoride: Toward Improvement of Cycle Performance.

Conversion-type iron trifluoride (FeF3) has attracted considerable attention as a positive electrode material for lithium secondary batteries due to its high energy density and low cost. However, the conversion process through which FeF3 operates leads it to suffer from capacity degradation upon repeated cycling. To improve the cycle performance, in this study we investigated the degradation mechanism of conversion-type FeF3 electrode material. Bulk analyses of FeF3 upon cycling reveal incomplete oxidation to Fe3+ concomitant with the aggregation of LiF at the charged state. In addition, surface analyses of FeF3 reveal that a film covered the electrode surface after 10 cycles, which leads to a remarkable increase in resistance. We show that the choice of the electrolyte formulation is crucial in preventing the formation of the film on the electrode surface; thus, FeF3 shows better performance in an electrolyte comprising LiBF4 solute in cyclic carbonate solvents than in chain carbonate-containing LiPF6 as the electrolyte. This study underpins that a careful selection of solvent, rather than solute, is significantly essential to improve the cycle performance of the FeF3 electrode.

A Reversible Rocksalt to Amorphous Phase Transition Involving Anion Redox.

The charge-discharge capacity of lithium secondary batteries is dependent on how many lithium ions can be reversibly extracted from (charge) and inserted into (discharge) the electrode active materials. In contrast, large structural changes during charging/discharging are unavoidable for electrode materials with large capacities, and thus there is great demand for developing materials with reversible structures. Herein, we demonstrate a reversible rocksalt to amorphous phase transition involving anion redox in a Li2TiS3 electrode active material with NaCl-type structure. We revealed that the lithium extraction during charging involves a change in site of the sulfur atom and the formation of S-S disulfide bonds, leading to a decrease in the crystallinity. Our results show great promise for the development of long-life lithium insertion/extraction materials, because the structural change clarified here is somewhat similar to that of optical phase-change materials used in DVD-RW discs, which exhibit excellent reversibility of the transition between crystalline and amorphous phase.

Soft X-Ray Imaging of Cellular Carbon and Nitrogen Distributions in Heterocystous Cyanobacteria.

Soft x-ray microscopy (SXM) is a minimally invasive technique for single-cell high-resolution imaging as well as the visualization of intracellular distributions of light elements such as carbon, nitrogen, and oxygen. We used SXM to observe photosynthesis and nitrogen fixation in the filamentous cyanobacterium Anabaena sp. PCC 7120, which can form heterocysts during nitrogen starvation. Statistical and spectroscopic analyses from SXM images around the K-absorption edge of nitrogen revealed a significant difference in the carbon-to-nitrogen (C/N) ratio between vegetative cells and heterocysts. Application of this analysis to soft x-ray images of Anabaena sp. PCC 7120 revealed inhomogenous C/N ratios in the cells. Furthermore, soft x-ray tomography of Anabaena sp. PCC 7120 revealed differing cellular C/N ratios, indicating different carbon and nitrogen distributions between vegetative cells and heterocysts in three dimensions.

Dissociation of ß-Sheet Stacking of Amyloid ß Fibrils by Irradiation of Intense, Short-Pulsed Mid-infrared Laser.

Structure of amyloid ß (Aß) fibrils is rigidly stacked by ß-sheet conformation, and the fibril state of Aß is profoundly related to pathogenesis of Alzheimer's disease (AD). Although mid-infrared light has been used for various biological researches, it has not yet been known whether the infrared light changes the fibril structure of Aß. In this study, we tested the effect of irradiation of intense mid-infrared light from a free-electron laser (FEL) targeting the amide bond on the reduction of ß-sheet content in Aß fibrils. The FEL reduced entire contents of proteins exhibiting ß-sheet structure in brain sections from AD model mice, as shown by synchrotron-radiation infrared microscopy analysis. Since Aß1-42 fibril absorbed a considerable FEL energy at amide I band (6.17 µm), we irradiated the FEL at 6.17 µm and found that ß-sheet content of naked Aß1-42 fibril was decreased using infrared microscopic analysis. Consistent with the decrease in the ß-sheet content, Congo-red signal is decreased after the irradiation to Aß1-42 fibril. Furthermore, electron microscopy analysis revealed that morphologies of the fibril and proto-fibril were largely changed after the irradiation. Thus, mid-infrared light dissociates ß-sheet structure of Aß fibrils, which justifies exploration of possible laser-based therapy for AD.

Nanostructuring one-dimensional and amorphous lithium peroxide for high round-trip efficiency in lithium-oxygen batteries.

The major challenge facing lithium-oxygen batteries is the insulating and bulk lithium peroxide discharge product, which causes sluggish decomposition and increasing overpotential during recharge. Here, we demonstrate an improved round-trip efficiency of ~80% by means of a mesoporous carbon electrode, which directs the growth of one-dimensional and amorphous lithium peroxide. Morphologically, the one-dimensional nanostructures with small volume and high surface show improved charge transport and promote delithiation (lithium ion dissolution) during recharge and thus plays a critical role in the facile decomposition of lithium peroxide. Thermodynamically, density functional calculations reveal that disordered geometric arrangements of the surface atoms in the amorphous structure lead to weaker binding of the key reaction intermediate lithium superoxide, yielding smaller oxygen reduction and evolution overpotentials compared to the crystalline surface. This study suggests a strategy to enhance the decomposition rate of lithium peroxide by exploiting the size and shape of one-dimensional nanostructured lithium peroxide.

Amorphous Metal Polysulfides: Electrode Materials with Unique Insertion/Extraction Reactions.

A unique charge/discharge mechanism of amorphous TiS4 is reported. Amorphous transition metal polysulfide electrodes exhibit anomalous charge/discharge performance and should have a unique charge/discharge mechanism: neither the typical intercalation/deintercalation mechanism nor the conversion-type one, but a mixture of the two. Analyzing the mechanism of such electrodes has been a challenge because fewer tools are available to examine the "amorphous" structure. It is revealed that the electrode undergoes two distinct structural changes: (i) the deformation and formation of S-S disulfide bonds and (ii) changes in the coordination number of titanium. These structural changes proceed continuously and concertedly for Li insertion/extraction. The results of this study provide a novel and unique model of amorphous electrode materials with significantly larger capacities.

Origin of stabilization and destabilization in solid-state redox reaction of oxide ions for lithium-ion batteries.

Further increase in energy density of lithium batteries is needed for zero emission vehicles. However, energy density is restricted by unavoidable theoretical limits for positive electrodes used in commercial applications. One possibility towards energy densities exceeding these limits is to utilize anion (oxide ion) redox, instead of classical transition metal redox. Nevertheless, origin of activation of the oxide ion and its stabilization mechanism are not fully understood. Here we demonstrate that the suppression of formation of superoxide-like species on lithium extraction results in reversible redox for oxide ions, which is stabilized by the presence of relatively less covalent character of Mn4+ with oxide ions without the sacrifice of electronic conductivity. On the basis of these findings, we report an electrode material, whose metallic constituents consist only of 3d transition metal elements. The material delivers a reversible capacity of 300 mAh g-1 based on solid-state redox reaction of oxide ions.

Ionic Conduction in Lithium Ion Battery Composite Electrode Governs Cross-sectional Reaction Distribution.

Composite electrodes containing active materials, carbon and binder are widely used in lithium-ion batteries. Since the electrode reaction occurs preferentially in regions with lower resistance, reaction distribution can be happened within composite electrodes. We investigate the relationship between the reaction distribution with depth direction and electronic/ionic conductivity in composite electrodes with changing electrode porosities. Two dimensional X-ray absorption spectroscopy shows that the reaction distribution is happened in lower porosity electrodes. Our developed 6-probe method can measure electronic/ionic conductivity in composite electrodes. The ionic conductivity is decreased for lower porosity electrodes, which governs the reaction distribution of composite electrodes and their performances.