ABSTRACT
High intensity near infrared femtosecond laser is a promising tool for three-dimensional processing of biological materials. During the processing of cells and tissues, long lasting gas bubbles randomly appeared around the laser focal point, however physicochemical and mechanical effects of the gas bubbles has not been emphasized. This paper presents characteristic behaviors of the gas bubbles and their contact effects on cell viability. High-speed imaging of the gas bubble formation with various additives in physiological medium confirms that the gas bubble consists of dissolved air, and amphipathic proteins stabilize the bubble surface. This surface protective layer inhibits interactions of gas bubbles and cell membranes. Consequently, the gas bubble contact does not cause critical effects on cell viability. On the other hands, burst of gas bubbles stimulated by an impact of femtosecond laser induced cavitation can lead to liquid jet flow that might cause serious mechanical damages on cells. These results provide insights for the parameter of biological tissue processing with intense fs laser pulses.
Subject(s)
Cell Culture Techniques , Lasers , Cell SurvivalABSTRACT
The stiffness of a plant cell in response to an applied force is determined not only by the elasticity of the cell wall but also by turgor pressure and cell geometry, which affect the tension of the cell wall. Although stiffness has been investigated using atomic force microscopy (AFM) and Young's modulus of the cell wall has occasionally been estimated using the contact-stress theory (Hertz theory), the existence of tension has made the study of stiffness more complex. Elastic shell theory has been proposed as an alternative method; however, the estimation of elasticity remains ambiguous. Here, we used finite element method simulations to verify the formula of the elastic shell theory for onion (Allium cepa) cells. We applied the formula and simulations to successfully quantify the turgor pressure and elasticity of a cell in the plane direction using the cell curvature and apparent stiffness measured by AFM. We conclude that tension resulting from turgor pressure regulates cell stiffness, which can be modified by a slight adjustment of turgor pressure in the order of 0.1 MPa. This theoretical analysis reveals a path for understanding forces inherent in plant cells.
Subject(s)
Cell Wall , Plant Cells , Cell Wall/physiology , Elastic Modulus , Elasticity , Microscopy, Atomic Force/methods , Onions , Plant Cells/physiologyABSTRACT
Here, we achieve shape-based separation of drug-treated Escherichia coli (E. coli) by viscoelastic microfluidics. Since shape is critical for modulating biological functions of E. coli, the ability to prepare homogeneous E. coli populations adopting uniform shape or sort bacterial sub-population based on their shape has significant implications for a broad range of biological, biomedical and environmental applications. A proportion of E. coli treated with 1 µg mL-1 of the antibiotic mecillinam were found to exhibit changes in shape from rod to sphere, and the heterogeneous E. coli populations after drug treatment with various aspect ratios (ARs) ranging from 1.0 to 5.5 were used for experiment. We demonstrate that E. coli with a lower AR, i.e., spherical E. coli (AR ≤ 1.5), are directed toward the middle outlet, while rod-shaped E. coli with a higher AR (AR > 1.5) are driven to the side outlets. Further, we demonstrate that the separation performance of the viscoelastic microfluidic device is influenced by two main factors: sheath-to-sample flow rate ratio and the concentration of poly-ethylene-oxide (PEO). To the best of our knowledge, this is the first report on shape-based separation of a single species of cells smaller than 4 µm by microfluidics.
Subject(s)
Escherichia coli , Microfluidics , Humans , Lab-On-A-Chip Devices , Polyethylene GlycolsABSTRACT
Continuous microfluidic focusing of particles, both synthetic and biological, is significant for a wide range of applications in industry, biology and biomedicine. In this study, we demonstrate the focusing of particles in a microchannel embedded with glass grooves engraved by femtosecond pulse (fs) laser. Results showed that the laser-engraved microstructures were capable of directing polystyrene particles and mouse myoblast cells (C2C12) towards the center of the microchannel at low Reynolds numbers (Re < 1). Numerical simulation revealed that localized side-to-center secondary flows induced by grooves at the channel bottom play an essential role in particle lateral displacement. Additionally, the focusing performance proved to be dependent on the angle of grooves and the middle open space between the grooves based on both experiments and simulation. Particle sedimentation rate was found to critically influence the focusing of particles of different sizes. Taking advantage of the size-dependent particle lateral displacement, selective focusing of micrometer particles was demonstrated. This study systematically investigated continuous particle focusing in a groove-embedded microchannel. We expect that this device will be used for further applications, such as cell sensing and nanoparticle separation in biological and biomedical areas.
Subject(s)
Microfluidic Analytical Techniques , Animals , Lasers , Mice , Microfluidics , Particle Size , PolystyrenesABSTRACT
Mechanical properties of the extracellular environment modulate axon outgrowth. Growth cones at the tip of extending axons generate traction force for axon outgrowth by transmitting the force of actin filament retrograde flow, produced by actomyosin contraction and F-actin polymerization, to adhesive substrates through clutch and cell adhesion molecules. A molecular clutch between the actin filament flow and substrate is proposed to contribute to cellular mechanosensing. However, the molecular identity of the clutch interface responsible for mechanosensitive growth cone advance is unknown. We previously reported that mechanical coupling between actin filament retrograde flow and adhesive substrates through the clutch molecule shootin1a and the cell adhesion molecule L1 generates traction force for axon outgrowth and guidance. Here, we show that cultured mouse hippocampal neurons extend longer axons on stiffer substrates under elastic conditions that correspond to the soft brain environments. We demonstrate that this stiffness-dependent axon outgrowth requires actin-adhesion coupling mediated by shootin1a, L1, and laminin on the substrate. Speckle imaging analyses showed that L1 at the growth cone membrane switches between two adhesive states: L1 that is immobilized and that undergoes retrograde movement on the substrate. The duration of the immobilized phase was longer on stiffer substrates; this was accompanied by increases in actin-adhesion coupling and in the traction force exerted on the substrate. These data suggest that the interaction between L1 and laminin is enhanced on stiffer substrates, thereby promoting force generation for axon outgrowth.
Subject(s)
Growth Cones , Laminin , Actins , Animals , Axons , Cells, Cultured , Mice , Neuronal OutgrowthABSTRACT
Apigenin is a flavonoid with antioxidant and anticancer effects. It has been reported that apigenin inhibits proliferation, migration, and invasion and induces apoptosis in cultured lung cancer cells. However, there is little information on the involvement of microRNAs (miRNAs) in its effects. miRNA microarray analysis and polymerase-chain-reaction analysis of miRNAs revealed that treatment of human lung cancer A549 cells with apigenin up-regulated the level of miR-34a-5p. Furthermore, mRNA microarray analysis and the results of three microRNA target prediction tools showed that Snail Family Transcriptional Repressor 1 (SNAI1), which inhibits the induction of apoptosis, had its mRNA expression down-regulated in A549 cells treated with apigenin. Our findings suggest that apigenin might induce apoptosis by down-regulation of SNAI1 through up-regulation of miR-34a-5p in A549 cells.
Subject(s)
Apigenin/pharmacology , Apoptosis/genetics , Down-Regulation/genetics , Lung Neoplasms/genetics , Lung Neoplasms/pathology , MicroRNAs/metabolism , Snail Family Transcription Factors/genetics , A549 Cells , Apoptosis/drug effects , Cell Survival/drug effects , Cell Survival/genetics , Down-Regulation/drug effects , Gene Expression Regulation, Neoplastic/drug effects , Humans , MicroRNAs/genetics , Models, Biological , RNA, Messenger/genetics , RNA, Messenger/metabolism , Snail Family Transcription Factors/metabolism , Up-Regulation/drug effects , Up-Regulation/geneticsABSTRACT
Microfluidic focusing of particles (both synthetic and biological), which enables precise control over the positions of particles in a tightly focused stream, is a prerequisite step for the downstream processing, such as detection, trapping and separation. In this study, we propose a novel hydrodynamic focusing method by taking advantage of open v-shaped microstructures on a glass substrate engraved by femtosecond pulse (fs) laser. The fs laser engraved microstructures were capable of focusing polystyrene particles and live cells in rectangular microchannels at relatively low Reynolds numbers (Re). Numerical simulations were performed to explain the mechanisms of particle focusing and experiments were carried out to investigate the effects of groove depth, groove number and flow rate on the performance of the groove-embedded microchannel for particle focusing. We found out that 10-µm polystyrene particles are directed toward the channel center under the effects of the groove-induced secondary flows in low-Re flows, e.g. Re < 1. Moreover, we achieved continuous focusing of live cells with different sizes ranging from 10 to 15 µm, i.e. human T-cell lymphoma Jurkat cells, rat adrenal pheochromocytoma PC12 cells and dog kidney MDCK cells. The glass grooves fabricated by fs laser are expected to be integrated with on-chip detection components, such as contact imaging and fluorescence lifetime-resolved imaging, for various biological and biomedical applications, where particle focusing at a relatively low flow rate is desirable.
ABSTRACT
The techniques for inducing the death of specific cells in tissue has attracted attention as new methodologies for studying cell function and tissue regeneration. In this study, we show that a sequential process of targeted cell death and removal can be triggered by short-term exposure of near-infrared femtosecond laser pulses. Kinetic analysis of the intracellular accumulation of trypan blue and the assay of caspase activity revealed that femtosecond laser pulses induced immediate disturbance of plasma membrane integrity followed by apoptosis-like cell death. Yet, adjacent cells showed no sign of membrane damage and no increased caspase activity. The laser-exposed cells eventually detached from the substrate after a delay of >54 min while adjacent cells remained intact. On the base of in vitro experiments, we applied the same approach to ablate targeted single cardiac cells of a live zebrafish heart. The ability of inducing targeted cell death with femtosecond laser pulses should find broad applications that benefit from precise cellular manipulation at the level of single cells in vivo and in vitro.
ABSTRACT
Atomic force microscopy (AFM) can measure the mechanical properties of plant tissue at the cellular level, but for in situ observations, the sample must be held in place on a rigid support and it is difficult to obtain accurate data for living plants without inhibiting their growth. To investigate the dynamics of root cell stiffness during seedling growth, we circumvented these problems by using an array of glass micropillars as a support to hold an Arabidopsis thaliana root for AFM measurements without inhibiting root growth. The root elongated in the gaps between the pillars and was supported by the pillars. The AFM cantilever could contact the root for repeated measurements over the course of root growth. The elasticity of the root epidermal cells was used as an index of the stiffness. By contrast, we were not able to reliably observe roots on a smooth glass substrate because it was difficult to retain contact between the root and the cantilever without the support of the pillars. Using adhesive to fix the root on the smooth glass plane overcame this issue, but prevented root growth. The glass micropillar support allowed reproducible measurement of the spatial and temporal changes in root cell elasticity, making it possible to perform detailed AFM observations of the dynamics of root cell stiffness.
ABSTRACT
High-speed isolation of microparticles (e.g., microplastics, heavy metal particles, microbes, cells) from heterogeneous populations is the key element of high-throughput sorting instruments for chemical, biological, industrial and medical applications. Unfortunately, the performance of continuous microparticle isolation or so-called sorting is fundamentally limited by the trade-off between throughput, purity, and yield. For example, at a given throughput, high-purity sorting needs to sacrifice yield, or vice versa. This is due to Poisson statistics of events (i.e., microparticles, microparticle clusters, microparticle debris) in which the interval between successive events is stochastic and can be very short. Here we demonstrate an on-chip microparticle sorter with an ultrashort switching window in both time (10 µs) and space (10 µm) at a high flow speed of 1 m s-1, thereby overcoming the Poisson trade-off. This is made possible by using femtosecond laser pulses that can produce highly localized transient cavitation bubbles in a microchannel to kick target microparticles from an acoustically focused, densely aligned, bumper-to-bumper stream of microparticles. Our method is important for rare-microparticle sorting applications where both high purity and high yield are required to avoid missing rare microparticles.
ABSTRACT
Microalgae-based metabolic engineering has been proven effective for producing valuable substances such as food supplements, pharmaceutical drugs, biodegradable plastics, and biofuels in the past decade. The ability to accurately visualize and quantify intracellular metabolites in live microalgae is essential for efficient metabolic engineering, but remains a major challenge due to the lack of characterization methods. Here we demonstrate it by synthesizing fluorogenic peptide aptamers with specific binding affinity to a target metabolite and delivering them into live microalgae by femtosecond laser photoporation at single-cell resolution. As a proof-of-principle demonstration of our method, we use it to characterize Euglena gracilis, a photosynthetic unicellular motile microalgal species, which is capable of producing paramylon (a carbohydrate granule similar to starch). Specifically, we synthesize a peptide aptamer containing a paramylon-binding fluorescent probe, 7-nitrobenzofurazan, and introduce it into E. gracilis cells one-by-one by suppressing their mobility with mannitol and transiently perforating them with femtosecond laser pulses at 800 nm for photoporation. To demonstrate the method's practical utility in metabolic engineering, we perform spatially and temporally resolved fluorescence microscopy of single live photoporated E. gracilis cells under different culture conditions. Our method holds great promise for highly efficient microalgae-based metabolic engineering.
Subject(s)
Aptamers, Peptide/administration & dosage , Metabolic Engineering/methods , Microalgae/metabolism , Biofuels/microbiology , Cytoplasm/metabolism , Euglena gracilis/metabolism , Fluorescent Dyes/metabolism , Glucans , Lasers , Microscopy, Fluorescence/methods , PhotosynthesisABSTRACT
Cellular micropattering has been increasingly adopted in quantitative biological experiments. A Q-switched pulsed neodymium-doped yttrium ortho-vanadate (Ndâ¶YVO4) laser directed in-situ microfabrication technique for cell patterning is presented. A platform is designed uniquely to achieve laser ablation. The platform is comprised of thin gold coating over a glass surface that functions as a thermal transducer and is over-layered by a cell repellant polymer layer. Micropatterns are engraved on the platform, subsequently exposing specific cell adhesive micro-domains by ablating the gold-polymer coating photothermally. Experimental results indicate that the proposed approach is applicable under culture conditions, viable toward cells, and has a higher engraving speed. Possible uses in arraying isolated single cells on the platform are also shown. Additionally, based on those micro-patterns, dynamic cellular morphological changes and migrational speed in response to geometrical barriers are studied to demonstrate the potential applications of the proposed approach. Our results further demonstrate that cells in narrower geometry had elongated shapes and higher migrational speed than those in wider geometry. Importantly, the proposed approach will provide a valuable reference for efforts to study single cell dynamics and cellular migration related processes for areas such as cell division, wound healing, and cancer invasion.
Subject(s)
Cell Culture Techniques/instrumentation , Lasers , Optics and Photonics/instrumentation , Optics and Photonics/methods , Cell Movement/physiology , HeLa Cells , Humans , Neodymium , Vanadates , YttriumABSTRACT
This study shows the modification of the surface of polymer-layered glass substrates to form biofunctional micropatterns through femtosecond laser ablation in an aqueous solution. Domains of micrometer size on a substrate can be selectively converted from proteinphobic (resistant to protein adsorption) to proteinphilic, allowing patterning of protein features under physiological aqueous conditions. When femtosecond laser pulses (800 nm, 1 kHz, 200-500 nJ per pulse) were focused on and scanned on the substrate, which was glass covered with the proteinphobic polymer 2-methacryloyloxyethylphosphorylcholine (MPC), the surface became proteinphilic. Surface analysis by X-ray photoelectron spectroscopy (XPS) and scanning electron microscopy (SEM) reveals that the laser ablates the MPC polymer. Extracellular matrix (ECM) proteins were bound to the laser-ablated surface by physisorption. Since femtosecond laser ablation is induced under physiological aqueous conditions, this approach can form micropatterns of functional ECM proteins with minimal damage. This method was applied to pattern collagen, laminin, and gelatin on the substrate. Removal of an ECM protein from the substrate followed by replacement with another ECM protein was achieved on demand at a specific location and time by the same laser ablation method. Living cells adhered to the fabricated domains where ECM proteins were arranged. The modification of patterning during cell culture was used to control cell migration and form arrays of different cells.
Subject(s)
Cell Culture Techniques/methods , Extracellular Matrix Proteins , Lasers , Microtechnology/methods , Cell Survival , Glass/chemistry , HeLa Cells , Humans , Surface Properties , Time Factors , Water/chemistryABSTRACT
This article describes a novel laser-directed microfabrication method carried out in aqueous solution for the organization of cell networks on a platform. A femtosecond (fs) laser was applied to a platform culturing PC12, HeLa, or normal human astrocyte (NHA) cells to manipulate them and to facilitate mutual connections. By applying an fs-laser-induced impulsive force, cells were detached from their original location on the plate, and translocated onto microfabricated cell-adhesive domains that were surrounded with a cell-repellent perfluoroalkyl (R(f)) polymer. Then the fs-laser pulse-train was applied to the R(f) polymer surface to modify the cell-repellent surface, and to make cell-adhesive channels of several µm in width between each cell-adhesive domain. PC12 cells elongated along the channels and made contact with others cells. HeLa and NHA cells also migrated along the channels and connected to the other cells. Surface analysis by X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) confirmed that the R(f) polymer was partially decomposed. The method presented here could contribute not only to the study of developing networks of neuronal, glial, and capillary cells, but also to the quantitative analysis of nerve function.
Subject(s)
Cell Communication , Coated Materials, Biocompatible/metabolism , Fluorocarbons/metabolism , Microtechnology/methods , Tissue Array Analysis/instrumentation , Animals , Astrocytes/cytology , Cell Adhesion , Cell Line , Cell Movement , Coated Materials, Biocompatible/chemistry , Equipment Failure , Fluorocarbons/chemistry , HeLa Cells , Humans , Lasers , PC12 Cells , Rats , Surface PropertiesABSTRACT
When nerve growth factor (NGF) is interacted with PC12 cells derived from rat pheochromocytoma, they are partially differentiated into neuron-like cells with neurites. In this work, PC12 cells differentiated by NGF were selectively isolated using a localized impulsive force in a µm-scale area, which was generated by focusing an infrared femtosecond laser into a cell culture medium. In order to evaluate the ability of the isolation method, differentiated and undifferentiated cells were isolated and their morphological changes after the isolation were compared. In both cases, their neurites were once contracted and some of them gradually regenerated day by day. When differentiated cells were isolated, the percentage of differentiated cells with regenerated neurites, 6 h after the isolation, was about 3.3 times higher than that when undifferentiated ones were isolated. This result was compared with a control trypsin experiment. In the comparison, it was indicated that the same degree of cell function was maintained when the present isolation method was used.
Subject(s)
Cell Differentiation , Cell Separation/methods , Lasers , Mechanical Phenomena , Single-Cell Analysis/methods , Animals , Cell Separation/instrumentation , Molecular Imaging , PC12 Cells , Rats , Single-Cell Analysis/instrumentation , Time Factors , Trypsin/metabolismABSTRACT
In-situ guidance of neuronal processes (neurites) is demonstrated by applying wet femtosecond-laser processing to an organosilane self-assembled monolayer (SAM) template. By scanning focused laser beam between cell adhesion sites, on which primary neurons adhered and extended their neurites, we succeeded in guiding the neurites along the laser-scanning line. This guidance was accomplished by multiphoton laser ablation of cytophobic SAM layer and subsequent adsorption of cell adhesion molecule, laminin, onto the ablated region. This technique allows us to arbitrarily design neuronal networks in vitro.
ABSTRACT
We have developed an in silico method of selection of human full-length cDNAs encoding secretion or membrane proteins from oligo-capped cDNA libraries. Fullness rates were increased to about 80% by combination of the oligo-capping method and ATGpr, software for prediction of translation start point and the coding potential. Then, using 5'-end single-pass sequences, cDNAs having the signal sequence were selected by PSORT ('signal sequence trap'). We also applied 'secretion or membrane protein-related keyword trap' based on the result of BLAST search against the SWISS-PROT database for the cDNAs which could not be selected by PSORT. Using the above procedures, 789 cDNAs were primarily selected and subjected to full-length sequencing, and 334 of these cDNAs were finally selected as novel. Most of the cDNAs (295 cDNAs: 88.3%) were predicted to encode secretion or membrane proteins. In particular, 165(80.5%) of the 205 cDNAs selected by PSORT were predicted to have signal sequences, while 70 (54.2%) of the 129 cDNAs selected by 'keyword trap' preserved the secretion or membrane protein-related keywords. Many important cDNAs were obtained, including transporters, receptors, and ligands, involved in significant cellular functions. Thus, an efficient method of selecting secretion or membrane protein-encoding cDNAs was developed by combining the above four procedures.
Subject(s)
Gene Library , Membrane Proteins/genetics , Protein Sorting Signals , 5' Flanking Region , Cell Line, Tumor , Cloning, Molecular , Humans , Oligonucleotides/geneticsABSTRACT
Inexpensive, high-throughput genotyping methods are needed for analyzing human genetic variations. We have successfully applied the regular bioluminometric assay coupled with modified primer extension reactions (BAMPER) method to single-nucleotide polymorphism (SNP) typing as well as the allele frequency determination for various SNPs. This method includes the production of single-strand target DNA from a genome and a primer extension reaction coupled with inorganic pyrophosphate (PPi) detection by a bioluminometric assay. It is an efficient way to get accurate allele frequencies for various SNPs, while single-strand DNA preparation is labor intensive. The procedure can be simplified in the typing of SNPs. We demonstrate that a modified BAMPER method in which we need not prepare a single-strand DNA can be carried out in one tube. A PCR product is directly used as a template for SNP typing in the new BAMPER method. Generally, tremendous amounts of PPi are produced in a PCR process, as well as many residual dNTPs, and residual PCR primers remain in the PCR products, which cause a large background signal in a bioluminometric assay. Here, shrimp alkaline phosphatase (SAP) and E. coli exonuclease I were used to degrade these components prior to BAMPER detection. The specific primer extension reactions in BAMPER were carried out under thermocycle conditions. The primers were extended to produce large amounts of PPi only when their bases at 3'-termini were complementary to the target. The extension products, PPis, were converted to ATP to be analyzed using the luciferin-luciferase detection system. We successfully demonstrated that PCR products can be directly genotyped by BAMPER in one tube for SNPs with various GC contents. As all reactions can be carried out in a single tube, the method will be useful for realizing a fully automated genotyping system.
Subject(s)
DNA Primers/genetics , DNA/genetics , Luminescent Measurements , Polymorphism, Single Nucleotide/genetics , Alleles , Base Pair Mismatch/genetics , DNA Mutational Analysis/instrumentation , DNA Mutational Analysis/methods , DNA Primers/chemical synthesis , Diphosphates/metabolism , Genes/genetics , Genome , Genotype , Humans , Myocardium/chemistry , Myocardium/metabolism , Nucleic Acid Amplification Techniques/instrumentation , Nucleic Acid Amplification Techniques/methodsSubject(s)
DNA Probes , DNA/blood , DNA/genetics , Polymorphism, Single Nucleotide , Blood Specimen Collection , DNA Helicases/blood , DNA Helicases/genetics , Exodeoxyribonucleases , Genotype , Humans , Luminescent Measurements , Matrix Metalloproteinase 9/blood , Matrix Metalloproteinase 9/genetics , Polymerase Chain Reaction/methods , RecQ Helicases , Receptors, Adrenergic, beta-2/blood , Receptors, Adrenergic, beta-2/genetics , Werner Syndrome HelicaseABSTRACT
We demonstrate a simple and rapid method for SNP typing, allele frequency determination, and trace mutant analysis that works with even an inexpensive detection system. This method is based on microchip electrophoresis of tagged probes incorporated with one-colored ddNTP (METPOC). The assay uses dye terminator incorporation into a pair of probes of different lengths specific to wild- and mutant-type targets, respectively. They are hybridized to the targets prior to ddNTP-Cy-5 incorporation, which occurs only for a matched probe-target duplex. Because the extension reactions for the two probes are carried out simultaneously in one tube and the products from both probes are analyzed in one channel by one-color fluorescence detection, an accurate comparative analysis of SNPs is possible. SNP typing as well as allele frequency determination in the range above 0.1% can easily be carried out using a commercial microchip electrophoresis system in a few minutes.