ABSTRACT
The purpose of this study is to clarify the degree of impregnation resulting from treatment of internal waterlogged wood samples using MRI. On a 1.5T MR scanner, T1 and T2 measurements were performed using inversion recovery and spin-echo sequences, respectively. The samples were cut waterlogged pieces of wood treated with various impregnation techniques which were divided into different concentrations of trehalose (C12H22O11) and polyethylene glycol (PEG; HO-(C2H4O)n-H) solutions. Then these samples underwent impregnation treatment every two weeks. From the results, we found that the slope of the T1-concentration curve using linear fitting showed the value of the internal area for PEG to be higher than the external area; internal, -2.73ms/wt% (R2=0.880); external, -1.50ms/wt% (R2=0.887). Furthermore, the slope of the T1-concentration curve using linear fitting showed the values for trehalose to have almost no difference when comparing the internal and the external areas; internal, -2.79ms/wt% (R2=0.759); external, -3.02ms/wt% (R2=0.795). However, the slope of the T2-concentration curve using linear fitting for PEG showed that there was only a slight change between the internal and the external areas; internal, 0.26ms/wt% (R2=0.642); external, 0.18ms/wt% (R2=0.920). The slope of the T2-concentration curve did not show a change in linear relationship between the internal and the external areas; internal, 0.06ms/wt% (R2=0.175); external, -0.14ms/wt% (R2=0.043). In conclusion, using visualization of relaxation time T1, it is possible to obtain more detail information noninvasively concerning the state of impregnation treatment of internal waterlogged wood.