Characterization of differences in immune responses during bolus and continuous infusion endotoxin challenges using mathematical modelling.

Endotoxin administration is commonly used to study the inflammatory response, and though traditionally given as a bolus injection, it can be administered as a continuous infusion over multiple hours. Several studies hypothesize that the latter better represents the prolonged and pronounced inflammation observed in conditions like sepsis. Yet very few experimental studies have administered endotoxin using both strategies, leaving significant gaps in determining the underlying mechanisms responsible for their differing immune responses. We used mathematical modelling to analyse cytokine data from two studies administering a 2 ng kg-1 dose of endotoxin, one as a bolus and the other as a continuous infusion over 4 h. Using our model, we simulated the dynamics of mean and subject-specific cytokine responses as well as the response to long-term endotoxin administration. Cytokine measurements revealed that the bolus injection led to significantly higher peaks for interleukin (IL)-8, while IL-10 reaches higher peaks during continuous administration. Moreover, the peak timing of all measured cytokines occurred later with continuous infusion. We identified three model parameters that significantly differed between the two administration methods. Monocyte activation of IL-10 was greater during the continuous infusion, while tumour necrosis factor α $ {\alpha} $ and IL-8 recovery rates were faster for the bolus injection. This suggests that a continuous infusion elicits a stronger, longer-lasting systemic reaction through increased stimulation of monocyte anti-inflammatory mediator production and decreased recovery of pro-inflammatory catalysts. Furthermore, the continuous infusion model exhibited prolonged inflammation with recurrent peaks resolving within 2 days during long-term (20-32 h) endotoxin administration.

Computational framework for the generation of one-dimensional vascular models accounting for uncertainty in networks extracted from medical images.

Patient-specific computational modeling is a popular, non-invasive method to answer medical questions. Medical images are used to extract geometric domains necessary to create these models, providing a predictive tool for clinicians. However, in vivo imaging is subject to uncertainty, impacting vessel dimensions essential to the mathematical modeling process. While there are numerous programs available to provide information about vessel length, radii, and position, there is currently no exact way to determine and calibrate these features. This raises the question, if we are building patient-specific models based on uncertain measurements, how accurate are the geometries we extract and how can we best represent a patient's vasculature? In this study, we develop a novel framework to determine vessel dimensions using change points. We explore the impact of uncertainty in the network extraction process on hemodynamics by varying vessel dimensions and segmenting the same images multiple times. Our analyses reveal that image segmentation, network size, and minor changes in radius and length have significant impacts on pressure and flow dynamics in rapidly branching structures and tapering vessels. Accordingly, we conclude that it is critical to understand how uncertainty in network geometry propagates to fluid dynamics, especially in clinical applications.

Application and reduction of a nonlinear hyperelastic wall model capturing ex vivo relationships between fluid pressure, area, and wall thickness in normal and hypertensive murine left pulmonary arteries.

Pulmonary hypertension is a cardiovascular disorder manifested by elevated mean arterial blood pressure (>20 mmHg) together with vessel wall stiffening and thickening due to alterations in collagen, elastin, and smooth muscle cells. Hypoxia-induced (type 3) pulmonary hypertension can be studied in animals exposed to a low oxygen environment for prolonged time periods leading to biomechanical alterations in vessel wall structure. This study introduces a novel approach to formulating a reduced order nonlinear elastic structural wall model for a large pulmonary artery. The model relating blood pressure and area is calibrated using ex vivo measurements of vessel diameter and wall thickness changes, under controlled pressure conditions, in left pulmonary arteries isolated from control and hypertensive mice. A two-layer, hyperelastic, and anisotropic model incorporating residual stresses is formulated using the Holzapfel-Gasser-Ogden model. Complex relations predicting vessel area and wall thickness with increasing blood pressure are derived and calibrated using the data. Sensitivity analysis, parameter estimation, subset selection, and physical plausibility arguments are used to systematically reduce the 16-parameter model to one in which a much smaller subset of identifiable parameters is estimated via solution of an inverse problem. Our final reduced one layer model includes a single set of three elastic moduli. Estimated ranges of these parameters demonstrate that nonlinear stiffening is dominated by elastin in the control animals and by collagen in the hypertensive animals. The pressure-area relation developed in this novel manner has potential impact on one-dimensional fluids network models of vessel wall remodeling in the presence of cardiovascular disease.

A topological data analysis study on murine pulmonary arterial trees with pulmonary hypertension.

Pulmonary hypertension (PH), defined by a mean pulmonary arterial blood pressure above 20 mmHg in the main pulmonary artery, is a cardiovascular disease impacting the pulmonary vasculature. PH is accompanied by chronic vascular remodeling, wherein vessels become stiffer, large vessels dilate, and smaller vessels constrict. Some types of PH, including hypoxia-induced PH (HPH), also lead to microvascular rarefaction. This study analyzes the change in pulmonary arterial morphometry in the presence of HPH using novel methods from topological data analysis (TDA). We employ persistent homology to quantify arterial morphometry for control and HPH mice characterizing normalized arterial trees extracted from micro-computed tomography (micro-CT) images. We normalize generated trees using three pruning algorithms before comparing the topology of control and HPH trees. This proof-of-concept study shows that the pruning method affects the spatial tree statistics and complexity. We find that HPH trees are stiffer than control trees but have more branches and a higher depth. Relative directional complexities are lower in HPH animals in the right, ventral, and posterior directions. For the radius pruned trees, this difference is more significant at lower perfusion pressures enabling analysis of remodeling of larger vessels. At higher pressures, the arterial networks include more distal vessels. Results show that the right, ventral, and posterior relative directional complexities increase in HPH trees, indicating the remodeling of distal vessels in these directions. Strahler order pruning enables us to generate trees of comparable size, and results, at all pressure, show that HPH trees have lower complexity than the control trees. Our analysis is based on data from 6 animals (3 control and 3 HPH mice), and even though our analysis is performed in a small dataset, this study provides a framework and proof-of-concept for analyzing properties of biological trees using tools from Topological Data Analysis (TDA). Findings derived from this study bring us a step closer to extracting relevant information for quantifying remodeling in HPH.

Toward an optimal contraception dosing strategy.

Anovulation refers to a menstrual cycle characterized by the absence of ovulation. Exogenous hormones such as synthetic progesterone and estrogen have been used to attain this state to achieve contraception. However, large doses are associated with adverse effects such as increased risk for thrombosis and myocardial infarction. This study utilizes optimal control theory on a modified menstrual cycle model to determine the minimum total exogenous estrogen/progesterone dose, and timing of administration to induce anovulation. The mathematical model correctly predicts the mean daily levels of pituitary hormones LH and FSH, and ovarian hormones E2, P4, and Inh throughout a normal menstrual cycle and reflects the reduction in these hormone levels caused by exogenous estrogen and/or progesterone. Results show that it is possible to reduce the total dose by 92% in estrogen monotherapy, 43% in progesterone monotherapy, and that it is most effective to deliver the estrogen contraceptive in the mid follicular phase. Finally, we show that by combining estrogen and progesterone the dose can be lowered even more. These results may give clinicians insights into optimal formulations and schedule of therapy that can suppress ovulation.

Parameter inference in a computational model of haemodynamics in pulmonary hypertension.

Pulmonary hypertension (PH), defined by a mean pulmonary arterial pressure (mPAP) greater than 20 mmHg, is characterized by increased pulmonary vascular resistance and decreased pulmonary arterial compliance. There are few measurable biomarkers of PH progression, but a conclusive diagnosis of the disease requires invasive right heart catheterization (RHC). Patient-specific cardiovascular systems-level computational models provide a potential non-invasive tool for determining additional indicators of disease severity. Using computational modelling, this study quantifies physiological parameters indicative of disease severity in nine PH patients. The model includes all four heart chambers, the pulmonary and systemic circulations. We consider two sets of calibration data: static (systolic and diastolic values) RHC data and a combination of static and continuous, time-series waveform data. We determine a subset of identifiable parameters for model calibration using sensitivity analyses and multi-start inference and perform posterior uncertainty quantification. Results show that additional waveform data enables accurate calibration of the right atrial reservoir and pump function across the PH cohort. Model outcomes, including stroke work and pulmonary resistance-compliance relations, reflect typical right heart dynamics in PH phenotypes. Lastly, we show that estimated parameters agree with previous, non-modelling studies, supporting this type of analysis in translational PH research.

A computational study of aortic reconstruction in single ventricle patients.

Patients with hypoplastic left heart syndrome (HLHS) are born with an underdeveloped left heart. They typically receive a sequence of surgeries that result in a single ventricle physiology called the Fontan circulation. While these patients usually survive into early adulthood, they are at risk for medical complications, partially due to their lower than normal cardiac output, which leads to insufficient cerebral and gut perfusion. While clinical imaging data can provide detailed insight into cardiovascular function within the imaged region, it is difficult to use these data for assessing deficiencies in the rest of the body and for deriving blood pressure dynamics. Data from patients used in this paper include three-dimensional, magnetic resonance angiograms (MRA), time-resolved phase contrast cardiac magnetic resonance images (4D-MRI) and sphygmomanometer blood pressure measurements. The 4D-MRI images provide detailed insight into velocity and flow in vessels within the imaged region, but they cannot predict flow in the rest of the body, nor do they provide values of blood pressure. To remedy these limitations, this study combines the MRA, 4D-MRI, and pressure data with 1D fluid dynamics models to predict hemodynamics in the major systemic arteries, including the cerebral and gut vasculature. A specific focus is placed on studying the impact of aortic reconstruction occurring during the first surgery that results in abnormal vessel morphology. To study these effects, we compare simulations for an HLHS patient with simulations for a matched control patient that has double outlet right ventricle (DORV) physiology with a native aorta. Our results show that the HLHS patient has hypertensive pressures in the brain as well as reduced flow to the gut. Wave intensity analysis suggests that the HLHS patient has irregular circulatory function during light upright exercise conditions and that predicted wall shear stresses are lower than normal, suggesting the HLHS patient may have hypertension.

Postural orthostatic tachycardia syndrome explained using a baroreflex response model.

Patients with postural orthostatic tachycardia syndrome (POTS) experience an excessive increase in heart rate (HR) and low-frequency (∼0.1 Hz) blood pressure (BP) and HR oscillations upon head-up tilt (HUT). These responses are attributed to increased baroreflex (BR) responses modulating sympathetic and parasympathetic signalling. This study uses a closed-loop cardiovascular compartment model controlled by the BR to predict BP and HR dynamics in response to HUT. The cardiovascular model predicts these quantities in the left ventricle, upper and lower body arteries and veins. HUT is simulated by letting gravity shift blood volume (BV) from the upper to the lower body compartments, and the BR control is modelled using set-point functions modulating peripheral vascular resistance, compliance, and cardiac contractility in response to changes in mean carotid BP. We demonstrate that modulation of parameters characterizing BR sensitivity allows us to predict the persistent increase in HR and the low-frequency BP and HR oscillations observed in POTS patients. Moreover, by increasing BR sensitivity, inhibiting BR control of the lower body vasculature, and decreasing central BV, we demonstrate that it is possible to simulate patients with neuropathic and hyperadrenergic POTS.

Numerical predictions of shear stress and cyclic stretch in pulmonary hypertension due to left heart failure.

Isolated post-capillary pulmonary hypertension (Ipc-PH) occurs due to left heart failure, which contributes to 1 out of every 9 deaths in the United States. In some patients, through unknown mechanisms, Ipc-PH transitions to combined pre-/post-capillary PH (Cpc-PH) and is associated with a dramatic increase in mortality. Altered mechanical forces and subsequent biological signaling in the pulmonary vascular bed likely contribute to the transition from Ipc-PH to Cpc-PH. However, even in a healthy pulmonary circulation, the mechanical forces in the smallest vessels (the arterioles, capillary bed, and venules) have not been quantitatively defined. This study is the first to examine this question via a computational fluid dynamics model of the human pulmonary arteries, arterioles, venules, and veins. Using this model, we predict temporal and spatial dynamics of cyclic stretch and wall shear stress with healthy and diseased hemodynamics. In the normotensive case for large vessels, numerical simulations show that large arteries have higher pressure and flow than large veins, as well as more pronounced changes in area throughout the cardiac cycle. In the microvasculature, shear stress increases and cyclic stretch decreases as vessel radius decreases. When we impose an increase in left atrial pressure to simulate Ipc-PH, shear stress decreases and cyclic stretch increases as compared to the healthy case. Overall, this model predicts pressure, flow, shear stress, and cyclic stretch that providing a way to analyze and investigate hypotheses related to disease progression in the pulmonary circulation.

A Mathematical Model of the Dynamics of Cytokine Expression and Human Immune Cell Activation in Response to the Pathogen Staphylococcus aureus.

Cell-based mathematical models have previously been developed to simulate the immune system in response to pathogens. Mathematical modeling papers which study the human immune response to pathogens have predicted concentrations of a variety of cells, including activated and resting macrophages, plasma cells, and antibodies. This study aims to create a comprehensive mathematical model that can predict cytokine levels in response to a gram-positive bacterium, S. aureus by coupling previous models. To accomplish this, the cytokines Tumor Necrosis Factor Alpha (TNF-α), Interleukin 6 (IL-6), Interleukin 8 (IL-8), and Interleukin 10 (IL-10) are included to quantify the relationship between cytokine release from macrophages and the concentration of the pathogen, S. aureus, ex vivo. Partial differential equations (PDEs) are used to model cellular response and ordinary differential equations (ODEs) are used to model cytokine response, and interactions between both components produce a more robust and more complete systems-level understanding of immune activation. In the coupled cellular and cytokine model outlined in this paper, a low concentration of S. aureus is used to stimulate the measured cellular response and cytokine expression. Results show that our cellular activation and cytokine expression model characterizing septic conditions can predict ex vivo mechanisms in response to gram-negative and gram-positive bacteria. Our simulations provide new insights into how the human immune system responds to infections from different pathogens. Novel applications of these insights help in the development of more powerful tools and protocols in infection biology.

A multiscale model of vascular function in chronic thromboembolic pulmonary hypertension.

Chronic thromboembolic pulmonary hypertension (CTEPH) is caused by recurrent or unresolved pulmonary thromboemboli, leading to perfusion defects and increased arterial wave reflections. CTEPH treatment aims to reduce pulmonary arterial pressure and reestablish adequate lung perfusion, yet patients with distal lesions are inoperable by standard surgical intervention. Instead, these patients undergo balloon pulmonary angioplasty (BPA), a multisession, minimally invasive surgery that disrupts the thromboembolic material within the vessel lumen using a catheter balloon. However, there still lacks an integrative, holistic tool for identifying optimal target lesions for treatment. To address this insufficiency, we simulate CTEPH hemodynamics and BPA therapy using a multiscale fluid dynamics model. The large pulmonary arterial geometry is derived from a computed tomography (CT) image, whereas a fractal tree represents the small vessels. We model ring- and web-like lesions, common in CTEPH, and simulate normotensive conditions and four CTEPH disease scenarios; the latter includes both large artery lesions and vascular remodeling. BPA therapy is simulated by simultaneously reducing lesion severity in three locations. Our predictions mimic severe CTEPH, manifested by an increase in mean proximal pulmonary arterial pressure above 20 mmHg and prominent wave reflections. Both flow and pressure decrease in vessels distal to the lesions and increase in unobstructed vascular regions. We use the main pulmonary artery (MPA) pressure, a wave reflection index, and a measure of flow heterogeneity to select optimal target lesions for BPA. In summary, this study provides a multiscale, image-to-hemodynamics pipeline for BPA therapy planning for patients with inoperable CTEPH. NEW & NOTEWORTHY This article presents novel computational framework for predicting pulmonary hemodynamics in chronic thromboembolic pulmonary hypertension. The mathematical model is used to identify the optimal target lesions for balloon pulmonary angioplasty, combining simulated pulmonary artery pressure, wave intensity analysis, and a new quantitative metric of flow heterogeneity.

Global sensitivity analysis informed model reduction and selection applied to a Valsalva maneuver model.

In this study, we develop a methodology for model reduction and selection informed by global sensitivity analysis (GSA) methods. We apply these techniques to a control model that takes systolic blood pressure and thoracic tissue pressure data as inputs and predicts heart rate in response to the Valsalva maneuver (VM). The study compares four GSA methods based on Sobol' indices (SIs) quantifying the parameter influence on the difference between the model output and the heart rate data. The GSA methods include standard scalar SIs determining the average parameter influence over the time interval studied and three time-varying methods analyzing how parameter influence changes over time. The time-varying methods include a new technique, termed limited-memory SIs, predicting parameter influence using a moving window approach. Using the limited-memory SIs, we perform model reduction and selection to analyze the necessity of modeling both the aortic and carotid baroreceptor regions in response to the VM. We compare the original model to systematically reduced models including (i) the aortic and carotid regions, (ii) the aortic region only, and (iii) the carotid region only. Model selection is done quantitatively using the Akaike and Bayesian Information Criteria and qualitatively by comparing the neurological predictions. Results show that it is necessary to incorporate both the aortic and carotid regions to model the VM.

Classification of orthostatic intolerance through data analytics.

Imbalance in the autonomic nervous system can lead to orthostatic intolerance manifested by dizziness, lightheadedness, and a sudden loss of consciousness (syncope); these are common conditions, but they are challenging to diagnose correctly. Uncertainties about the triggering mechanisms and the underlying pathophysiology have led to variations in their classification. This study uses machine learning to categorize patients with orthostatic intolerance. We use random forest classification trees to identify a small number of markers in blood pressure, and heart rate time-series data measured during head-up tilt to (a) distinguish patients with a single pathology and (b) examine data from patients with a mixed pathophysiology. Next, we use Kmeans to cluster the markers representing the time-series data. We apply the proposed method analyzing clinical data from 186 subjects identified as control or suffering from one of four conditions: postural orthostatic tachycardia (POTS), cardioinhibition, vasodepression, and mixed cardioinhibition and vasodepression. Classification results confirm the use of supervised machine learning. We were able to categorize more than 95% of patients with a single condition and were able to subgroup all patients with mixed cardioinhibitory and vasodepressor syncope. Clustering results confirm the disease groups and identify two distinct subgroups within the control and mixed groups. The proposed study demonstrates how to use machine learning to discover structure in blood pressure and heart rate time-series data. The methodology is used in classification of patients with orthostatic intolerance. Diagnosing orthostatic intolerance is challenging, and full characterization of the pathophysiological mechanisms remains a topic of ongoing research. This study provides a step toward leveraging machine learning to assist clinicians and researchers in addressing these challenges. Graphical abstract Machine learning tools utilized to analyze heart rate (HR) and blood pressure (BP) time-series data from syncope and control patients. Results show that machine learning can provide accurate classification of disease groups for 98% of patients and we identified two subgroups within the control patients differentiated by their BP response.

A physiological model of the inflammatory-thermal-pain-cardiovascular interactions during an endotoxin challenge.

KEY POINTS: Inflammation in response to bacterial endotoxin challenge impacts physiological functions, including cardiovascular, thermal and pain dynamics, although the mechanisms are poorly understood. We develop an innovative mathematical model incorporating interaction pathways between inflammation and physiological processes observed in response to an endotoxin challenge. We calibrate the model to individual data from 20 subjects in an experimental study of the human inflammatory and physiological responses to endotoxin, and we validate the model against human data from an independent study. Using the model to simulate patient responses to different treatment modalities reveals that a multimodal treatment combining several therapeutic strategies gives the best recovery outcome. ABSTRACT: Uncontrolled, excessive production of pro-inflammatory mediators from immune cells and traumatized tissues can cause systemic inflammatory conditions such as sepsis, one of the ten leading causes of death in the USA, and one of the three leading causes of death in the intensive care unit. Understanding how inflammation affects physiological processes, including cardiovascular, thermal and pain dynamics, can improve a patient's chance of recovery after an inflammatory event caused by surgery or a severe infection. Although the effects of the autonomic response on the inflammatory system are well-known, knowledge about the reverse interaction is lacking. The present study develops a mathematical model analyzing the inflammatory system's interactions with thermal, pain and cardiovascular dynamics in response to a bacterial endotoxin challenge. We calibrate the model with individual data from an experimental study of the inflammatory and physiological responses to a one-time administration of endotoxin in 20 healthy young men and validate it against data from an independent endotoxin study. We use simulation to explore how various treatments help patients exposed to a sustained pathological input. The treatments explored include bacterial endotoxin adsorption, antipyretics and vasopressors, as well as combinations of these. Our findings suggest that the most favourable recovery outcome is achieved by a multimodal strategy, combining all three interventions to simultaneously remove endotoxin from the body and alleviate symptoms caused by the immune system as it fights the infection.

Sensitivity analysis and uncertainty quantification of 1-D models of pulmonary hemodynamics in mice under control and hypertensive conditions.

Pulmonary hypertension (PH), defined as an elevated mean blood pressure in the main pulmonary artery (MPA) at rest, is associated with vascular remodeling of both large and small arteries. PH has several sub-types that are all linked to high mortality rates. In this study, we use a one-dimensional (1-D) fluid dynamics model driven by in vivo measurements of MPA flow to understand how model parameters and network size influence MPA pressure predictions in the presence of PH. We compare model predictions with in vivo MPA pressure measurements from a control and a hypertensive mouse and analyze results in three networks of increasing complexity, extracted from micro-computed tomography (micro-CT) images. We introduce global scaling factors for boundary condition parameters and perform local and global sensitivity analysis to calculate parameter influence on model predictions of MPA pressure and correlation analysis to determine a subset of identifiable parameters. These are inferred using frequentist optimization and Bayesian inference via the Delayed Rejection Adaptive Metropolis (DRAM) algorithm. Frequentist and Bayesian uncertainty is computed for model parameters and MPA pressure predictions. Results show that MPA pressure predictions are most sensitive to distal vascular resistance and that parameter influence changes with increasing network complexity. Our outcomes suggest that PH leads to increased vascular stiffness and decreased peripheral compliance, congruent with clinical observations.

Assessing model mismatch and model selection in a Bayesian uncertainty quantification analysis of a fluid-dynamics model of pulmonary blood circulation.

This study uses Bayesian inference to quantify the uncertainty of model parameters and haemodynamic predictions in a one-dimensional pulmonary circulation model based on an integration of mouse haemodynamic and micro-computed tomography imaging data. We emphasize an often neglected, though important source of uncertainty: in the mathematical model form due to the discrepancy between the model and the reality, and in the measurements due to the wrong noise model (jointly called 'model mismatch'). We demonstrate that minimizing the mean squared error between the measured and the predicted data (the conventional method) in the presence of model mismatch leads to biased and overly confident parameter estimates and haemodynamic predictions. We show that our proposed method allowing for model mismatch, which we represent with Gaussian processes, corrects the bias. Additionally, we compare a linear and a nonlinear wall model, as well as models with different vessel stiffness relations. We use formal model selection analysis based on the Watanabe Akaike information criterion to select the model that best predicts the pulmonary haemodynamics. Results show that the nonlinear pressure-area relationship with stiffness dependent on the unstressed radius predicts best the data measured in a control mouse.

Structural and hemodynamic properties of murine pulmonary arterial networks under hypoxia-induced pulmonary hypertension.

Detection and monitoring of patients with pulmonary hypertension, defined as a mean blood pressure in the main pulmonary artery above 25 mmHg, requires a combination of imaging and hemodynamic measurements. This study demonstrates how to combine imaging data from microcomputed tomography images with hemodynamic pressure and flow waveforms from control and hypertensive mice. Specific attention is devoted to developing a tool that processes computed tomography images, generating subject-specific arterial networks in which one-dimensional fluid dynamics modeling is used to predict blood pressure and flow. Each arterial network is modeled as a directed graph representing vessels along the principal pathway to ensure perfusion of all lobes. The one-dimensional model couples these networks with structured tree boundary conditions representing the small arteries and arterioles. Fluid dynamics equations are solved in this network and compared to measurements of pressure in the main pulmonary artery. Analysis of microcomputed tomography images reveals that the branching ratio is the same in the control and hypertensive animals, but that the vessel length-to-radius ratio is significantly lower in the hypertensive animals. Fluid dynamics predictions show that in addition to changed network geometry, vessel stiffness is higher in the hypertensive animal models than in the control models.

Mechanistic model of hormonal contraception.

Contraceptive drugs intended for family planning are used by the majority of married or in-union women in almost all regions of the world. The two most prevalent types of hormones associated with contraception are synthetic estrogens and progestins. Hormonal based contraceptives contain a dose of a synthetic progesterone (progestin) or a combination of a progestin and a synthetic estrogen. In this study we use mathematical modeling to understand better how these contraceptive paradigms prevent ovulation, special focus is on understanding how changes in dose impact hormonal cycling. To explain this phenomenon, we added two autocrine mechanisms essential to achieve contraception within our previous menstrual cycle models. This new model predicts mean daily blood concentrations of key hormones during a contraceptive state achieved by administering progestins, synthetic estrogens, or a combined treatment. Model outputs are compared with data from two clinical trials: one for a progestin only treatment and one for a combined hormonal treatment. Results show that contraception can be achieved with synthetic estrogen, with progestin, and by combining the two hormones. An advantage of the combined treatment is that a contraceptive state can be obtained at a lower dose of each hormone. The model studied here is qualitative in nature, but can be coupled with a pharmacokinetic/pharamacodynamic (PKPD) model providing the ability to fit exogenous inputs to specific bioavailability and affinity. A model of this type may allow insight into a specific drug's effects, which has potential to be useful in the pre-clinical trial stage identifying the lowest dose required to achieve contraception.

Deep phenotyping of cardiac function in heart transplant patients using cardiovascular system models.

KEY POINTS: Right heart catheterization data from clinical records of heart transplant patients are used to identify patient-specific models of the cardiovascular system. These patient-specific cardiovascular models represent a snapshot of cardiovascular function at a given post-transplant recovery time point. This approach is used to describe cardiac function in 10 heart transplant patients, five of which had multiple right heart catheterizations allowing an assessment of cardiac function over time. These patient-specific models are used to predict cardiovascular function in the form of right and left ventricular pressure-volume loops and ventricular power, an important metric in the clinical assessment of cardiac function. Outcomes for the longitudinally tracked patients show that our approach was able to identify the one patient from the group of five that exhibited post-transplant cardiovascular complications. ABSTRACT: Heart transplant patients are followed with periodic right heart catheterizations (RHCs) to identify post-transplant complications and guide treatment. Post-transplant positive outcomes are associated with a steady reduction of right ventricular and pulmonary arterial pressures, toward normal levels of right-side pressure (about 20 mmHg) measured by RHC. This study shows that more information about patient progression is obtained by combining standard RHC measures with mechanistic computational cardiovascular system models. The purpose of this study is twofold: to understand how cardiovascular system models can be used to represent a patient's cardiovascular state, and to use these models to track post-transplant recovery and outcome. To obtain reliable parameter estimates comparable within and across datasets, we use sensitivity analysis, parameter subset selection, and optimization to determine patient-specific mechanistic parameters that can be reliably extracted from the RHC data. Patient-specific models are identified for 10 patients from their first post-transplant RHC, and longitudinal analysis is carried out for five patients. Results of the sensitivity analysis and subset selection show that we can reliably estimate seven non-measurable quantities; namely, ventricular diastolic relaxation, systemic resistance, pulmonary venous elastance, pulmonary resistance, pulmonary arterial elastance, pulmonary valve resistance and systemic arterial elastance. Changes in parameters and predicted cardiovascular function post-transplant are used to evaluate the cardiovascular state during recovery of five patients. Of these five patients, only one showed inconsistent trends during recovery in ventricular pressure-volume relationships and power output. At the four-year post-transplant time point this patient exhibited biventricular failure along with graft dysfunction while the remaining four exhibited no cardiovascular complications.

Characterization of Blood Pressure and Heart Rate Oscillations of POTS Patients via Uniform Phase Empirical Mode Decomposition.

OBJECTIVE: Postural Orthostatic Tachycardia Syndrome (POTS) is associated with the onset of tachycardia upon postural change. The current diagnosis involves the measurement of heart rate (HR) and blood pressure (BP) during head-up tilt (HUT) or active standing test. A positive diagnosis is made if HR changes with more than 30 bpm (40 bpm in patients aged 12-19 years), ignoring all of the BP and most of the HR signals. This study examines 0.1 Hz oscillations in systolic arterial blood pressure (SBP) and HR signals providing additional metrics characterizing the dynamics of the baroreflex. METHODS: We analyze data from 28 control subjects and 28 POTS patients who underwent HUT. We extract beat-to-beat HR and SBP during a 10 min interval including 5 minutes of baseline and 5 minutes of HUT. We employ Uniform Phase Empirical Mode Decomposition (UPEMD) to extract 0.1 Hz stationary modes from both signals and use random forest machine learning and k-means clustering to analyze the outcomes. Results show that the amplitude of the 0.1 Hz oscillations is higher in POTS patients and that the phase response between the two signals is shorter (p < 0.005). CONCLUSION: POTS is associated with an increase in the amplitude of SBP and HR 0.1 Hz oscillation and shortening of the phase between the two signals. SIGNIFICANCE: The 0.1 Hz phase response and oscillation amplitude metrics provide new markers that can improve POTS diagnostic augmenting the existing diagnosis protocol only analyzing the change in HR.