Is malocclusion a predictor of pain in patients suffering from TMD pain?

BACKGROUND: Temporomandibular disorders (TMD) affect the masticatory muscles, temporomandibular joints (TMJs) and associated structures. The relationship between occlusion and TMD is a contentious issue in the dental field. OBJECTIVES: Although there is a strong argument against invasive and irreversible therapeutic TMD procedures, the TMD biopsychosocial model is still not accepted by some clinicians. Hence, this study aimed to verify whether malocclusions are related to TMD pain. MATERIAL AND METHODS: The study included 49 adult patients with one or multiple TMD diagnoses and without any other diseases that could mimic TMD. A reliable investigator diagnosed the patients using the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) protocol. The sample was divided into pain and non-pain TMD groups, and the predictor of malocclusion was categorized as the dependent variable. There were 33 patients in the TMD pain group and 16 patients in the non-pain TMD group. Analyses were conducted at a significance level of 0.05. The χ2 test (with Yates' correction for 2 × 2 matrix) was used to compare qualitative variables between the groups. RESULTS: Malocclusion was present in 13 patients in the pain group and 7 patients in the non-pain group. CONCLUSIONS: According to our study, there is no correlation between malocclusion and TMD pain.

Diagnostic Criteria for Temporomandibular Disorders (DC/TMD): Polish assessment instruments.

The article presents the Polish version of the Diagnostic Criteria for Temporomandibular Disorders (DC/TMD), the process of document translation and cultural adaptation.

Relationship between pain severity, satisfaction with life and the quality of sleep in Polish adults with temporomandibular disorders.

BACKGROUND: Temporomandibular disorders (TMD) pose a serious health problem that can have a negative effect on patients' lives, impair work performance, and result in work absences and restrictions in daily activities. OBJECTIVES: The aim of this observational, cross-sectional study was to evaluate the level of satisfaction with life among Polish patients with TMD and to assess the influence of pain severity on this parameter. A secondary goal was to investigate sleep quality within this patient group and explore its relationship with pain. MATERIAL AND METHODS: A total of 219 patients from the Outpatient Clinic for Temporomandibular Disorders at the University Dental Polyclinic in Wroclaw, Poland, participated in this study. These individuals underwent a clinical examination using the Diagnostic Criteria for Temporomandibular Disorders (DC/TMD) protocol and completed 2 validated questionnaires, namely the Satisfaction With Life Scale (SWLS) and the Pittsburgh Sleep Quality Index (PSQI). Furthermore, the patients were assessed for the severity of masseter muscle pain (MMP) and temporal muscle pain (TMP), and the average pain in these muscles (AMP) was calculated. Subsequently, a statistical analysis was performed on the collected data. RESULTS: The group of patients with average satisfaction with life exhibited significantly higher levels of MMP (p = 0.025) and AMP (p = 0.044) as compared to the high-satisfaction group. Regarding sleep quality, 50.23% of the patients experienced poor sleep quality. Poor sleep quality was found to be statistically associated with higher levels of TMP (p = 0.032) and AMP (p = 0.028). Moreover, women demonstrated significantly worse sleep quality as compared to men (p = 0.002). The findings indicate that PSQI has a greater impact on SWLS than vice versa. CONCLUSIONS: Due to a large number of TMD patients experiencing poor sleep quality and the associated reduced life satisfaction, these parameters should be considered as influential factors that modify the management of patients with TMD.

Musculoskeletal manifestations of Lyme borreliosis - a review.

Lyme borreliosis (LB) is a zoonotic disease caused by Gram-negative bacteria Borrelia burgdorferi sensu lato. The majority of reported cases of LB originate in the northern hemisphere, mostly in the US and Europe. One of the typical manifestations of LB are musculoskeletal symptoms; they may appear in any of the three LB stages. The diagnosis is based on clinical manifestations and confirmed by serological tests. One course of antibiotic therapy is sufficient for LB to dissipate in most cases, although for some patients, the symptoms subside gradually even after completion of therapy. Patients who have been demonstrated to have specific antibodies but are symptomless should not be treated. In instances where the advised treatment proved to be unsuccessful, patients should be referred to rheumatologist for additional diagnostics. The goal of this review is to update physicians on current scientific knowledge on musculoskeletal manifestations of LB.

Wear of bulk-fill resin composites.

OBJECTIVE: Bulk-fill resin composites are a special group of restorative materials designed to reduce chair time needed to insert a direct composite restoration. However, other factors determine the clinical success of a restorative material. Clinically the major reasons for failure of direct restorations are secondary caries and fracture of the restoration or the tooth itself. In the long-term composite resin restorations in posterior teeth may be prone to wear. As bulk-fill materials have their own composition that will determine their mechanical properties, the wear resistance may be affected as well. The aim of this in vitro study was to evaluate the wear of bulk-fill composites in comparison with a conventional hybrid composite. The null hypothesis was that there are no differences between the four bulk-fill materials and one traditional highly filled nanohybrid composite for posterior use when subjected to a two-body wear rate test and hardness measurement. METHODS: Four bulk-fill composites SDR Smart Dentin Replacement (SDR), X-tra base (XBA), FiltekBulk Fill (FUP), Dual-Curing Bulk Composite (FBFL) and conventional nanohybrid resin composite Grandio (GDO) subjected to a two-body wear test against a stainless steel (SS) antagonist wheel. Scanning Electron Microscopy analysis was performed to detect the surface alterations. Microhardness of all samples was tested (n = 5) with a Vickers diamond indenter (5 indentations in each specimen). One-way ANOVA and Tukey's post hoc test (P < 0.01) were used to analyze differences in wear values. The hardness data were submitted to one-way ANOVA test, followed by the Tukey post hoc test (α = 0.05). T-test was applied to compare wear rate in time interval between one day and one month. RESULTS: The highest wear rate values were recorded for SDR and the lowest wear rate values were for GDO. Hardness was the highest for GDO and the lowest for FBFL. SIGNIFICANCE: The bulk-fill composites have a higher wear rate and lower hardness than the conventional nanohybrid composite, making them less suitable for stress-bearing restorations.

Effects of occlusal splint therapy on opposing tooth tissues, filling materials and restorations.

BACKGROUND: Little is known about the effect of the type of splint material, heat-cured PMMA (HC) or chemical-cured PMMA (CC) on the wear of opposing tooth surfaces. OBJECTIVE: The aim of this in vitro study was to evaluate two-body wear of dentin, enamel, glass-ceramic or one of four resin composites when opposing splint materials, namely ProBase HC and CC. METHODS: The two-body wear of bovine dentine, bovine enamel, glass-ceramic IPS e.max CAD (EMAX) and four composites (Filtek Z250 [Z250], Clearfil AP-X [AP-X], Clearfil Majesty Posterior [CMP], Filtek Supreme XTE [FSE]) opposing three antagonists (HC and CC and stainless steel as control) were evaluated in the ACTA wear machine. In addition, all the surfaces were evaluated with scanning electron microscopy. RESULTS: The highest average wear was observed in the case of dentin. The lowest average wear was found EMAX. In every case-except for EMAX-the wear rate was higher with HC than with CC (all differences being statistically significant). CONCLUSIONS: The level of wear of enamel, dentin and various resin composites was higher in contact with HC than in CC, the wear of dentin being the highest. In the case of a patient with no or little tooth wear or whose teeth are restored with composite material or glass-ceramic, the splint HC might be preferred because of its better durability. However, when the splint is in contact with opposing dentin preservation of the dentin, CC might be the best choice.

Evaluation of interleukin-1 beta and the ratio of interleukin-1 beta to interleukin-1 receptor antagonist in gingival crevicular fluid during orthodontic canine retraction.

BACKGROUND: Orthodontic tooth movement (OTM) is a complex phenomenon mediated by cytokines, of which interleukin-1 beta (IL­1ß) is potently involved in the remodeling of the periodontal ligament (PDL) and bone. Whether the pattern of IL­1ß release differs at the sides of tension and compression is not yet clarified. OBJECTIVES: The aim of the present study was to evaluate the level of IL­1ß and the ratio of IL­1ß to interleukin-1 receptor antagonist (IL­1RA) in gingival crevicular fluid (GCF) at the tension and compression sides during orthodontic canine retraction. MATERIAL AND METHODS: Seventeen patients scheduled for orthodontic treatment with bilateral extraction of maxillary first premolars and canine retraction were enrolled. Tooth 2.3 was retracted, teeth 1.3 and 3.3 served as controls. Gingival crevicular fluid samples were collected from the tension and compression sides of each tooth at baseline (before the 1st activation - day 0) and at days 2 and 7, and then again before the 2nd activation (day 28) and at days 30 and 35. The levels of IL­1ß and IL­RA were evaluated with the enzyme-linked immunosorbent assay (ELISA). RESULTS: After the 1st activation, a statistically significant increase in the level of IL­1ß was observed at teeth 2.3 (p < 0.03 mesially and p < 0.05 distally) and 1.3 (p < 0.05 mesially and distally), both at the tension and compression sides. The 2nd activation resulted in a gradual increase in the IL­1ß level at both canines; however, statistical significance was reached only for tooth 2.3 (p < 0.05 mesially and p < 0.02 distally). In terms of the IL­1ß/IL­1RA ratio, a significant increase was observed only at the compression side of the experimental tooth (p < 0.01). CONCLUSIONS: An increase in the IL­1ß level in GCF was observed both at the tension and compression sides of the actively retracted canine 2.3 as well as the contralateral canine 1.3; a significant rise in the IL­1ß/IL­1RA ratio was noted only at the compression side of the experimental tooth 2.3, indicating the zone of active bone resorption.

Self-Perceived Dentists' Knowledge of Temporomandibular Disorders in Krakow: A Pilot Study.

Introduction: The most common nondental orofacial pain conditions are temporomandibular disorders (TMDs). TMD basic examination and clinical management are included in a curriculum of each dentistry programme taught in Poland, but it is not clear how the dentists cope with diagnosis and possible treatment in their routine dental practices. The objective of the present study was to assess a level of self-perceived knowledge of TMD amongst dentists in Poland. Materials and methods. The participants, of whom all studied and graduated from a Polish university, were randomly selected from dental offices in Krakow (Poland). The selected dentists were administered an anonymous questionnaire, which contained questions measuring self-assessment of knowledge of TMD diagnosis and therapy and assessing knowledge of ethology and TMD symptoms. Results: Only 6.5% of the participants identified their TMD knowledge as very good, 32.3% assessed it as good, 39.3% thought it was sufficient, 20.4% as insufficient, and 1.49% considered it as poor. 9.4% of all participants have attempted to diagnose and treat TMD patients very often, 26.4% declared performing it often, 45.8% rarely, and 18.4% had never made such an attempt. There was a significant relationship between the dentists' knowledge and their attempts at diagnosing and treating TMD patients (p < 0.05). Conclusion: The level of TMD knowledge amongst the Polish dentists is still insufficient. Raising its level would considerably help the dentists to refer their patients to right specialists for a diagnosis and TMD treatment and/or interdisciplinary management of TMD patients.

Pain Predictors in a Population of Temporomandibular Disorders Patients.

The aim of the present study was to assess the potential role of some biological, psychological, and social factors to predict the presence of painful temporomandibular disorders (TMDs) in a TMD-patient population. The study sample consisted of 109 consecutive adult patients (81.7% females; mean age 33.2 ± 14.7 years) who were split into two groups based on Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) diagnoses: painful TMD and non-painful TMD. The presence of pain was adopted as the depended variable to be identified by the following independent variables (i.e., predictors): age, gender, bruxism, tooth wear, chewing gum, nail biting, perceived stress level, chronic pain-related impairment (GCPS), depression (DEP), and somatization (SOM). Single-variable logistic regression analysis showed a significant relationship between TMD pain and DEP with an odds ratio of 2.9. Building up a multiple variable model did not contribute to increase the predictive value of a TMD pain model related to the presence of depression. Findings from the present study supported the existence of a relationship between pain and depression in painful TMD patients. In the future, study designs should be improved by the adoption of the best available assessment approaches for each factor.

Prevalence of Function-Dependent Temporomandibular Joint and Masticatory Muscle Pain, and Predictors of Temporomandibular Disorders among Patients with Lyme Disease.

The aim was to determine the occurrence of temporomandibular disorders (TMDs) in patients with Lyme disease (LD), and to estimate the contribution of factors that may identify TMD among LD patients. In seventy-six (N = 76) adult patients with LD (mean age 57.6 ± 14.6 years) and 54 healthy non-Lyme volunteers with a mean age of 56.4 ± 13.5 years, possible function (i.e., non-pain) diagnoses were established using the Research Diagnostic Criteria of Temporomandibular Disorders (RDC/TMD). Pain diagnoses were established by means of the function-dependent dynamic and static tests. The two groups did not significantly differ in the frequency of disc displacements diagnoses and function-dependent pain diagnoses. LD showed a significantly higher frequency (p < 0.001) of osteoarthrosis than the control group. For the prediction of pain diagnoses in LD patients, the single regression analyses pointed out an association with age, sleep bruxism (SB), and awake bruxism (AB). Two predictors (i.e., SB (p = 0.002) and AB (p = 0.017)) were statistically significant in the final multiple variable model. The frequency of TMD in patients with LD based on function-dependent tests was not significantly different from that in the control group. This investigation suggests that the contribution of bruxism to the differentiation between patients with Lyme and TMD is high.

Differences between palpation and static/dynamic tests to diagnose painful temporomandibular disorders in patients with Lyme disease.

OBJECTIVES: The aim was to determine the frequency of Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD)-based pain diagnoses and dynamic/static tests-based pain diagnoses, and to assess the agreement of palpation tests with static/dynamic tests. MATERIALS AND METHODS: Eighty-six (N = 86) adult patients with Lyme disease (mean age 57.0 ± 14.3 years; male/female ratio was 42/44) were examined according to techniques described in the RDC/TMD. Additionally, dynamic/static tests were performed. For RDC/TMD-based pain diagnoses and dynamic/static tests-based pain diagnoses, descriptive frequencies were calculated. Differences between the frequency of palpation-based diagnoses and of dynamic/static-based diagnoses as well as the agreement between pain diagnoses established with the two diagnostic approaches were assessed. RESULTS: RDC/TMD-based pain diagnoses were made in 61 patients for myofascial pain and in 11 patients for arthralgia and/or osteoarthritis. Based on dynamic/static tests, mainly myogenous pain was diagnosed in 6 patients, and a mainly arthrogenous pain in 5. The agreement of palpation tests with static/dynamic tests in Lyme disease population was poor. CONCLUSION: A high prevalence of TMD symptoms was found in patients with Lyme disease. The results suggest that using palpation tests alone could overestimate primary TMDs when comorbid conditions are present. CLINICAL RELEVANCE: Dynamic/static tests should be used as part of the routine TMD assessment. In case of Lyme disease as the actual cause of the facial pain, while the dentist might be suspecting TMD when dynamic/static TMD tests are negative, referral to an appropriate specialist for the diagnosis and treatment of Lyme disease needs to be made.

Ecological Momentary Assessment and Intervention Principles for the Study of Awake Bruxism Behaviors, Part 2: Development of a Smartphone Application for a Multicenter Investigation and Chronological Translation for the Polish Version.

Objectives: The aim is to describe the process of translating the smartphone application BruxApp into Polish within the context of an ongoing multicenter project on awake bruxism (AB) epidemiology. Material and Methods: An ongoing cooperation involving 11 universities is based on the adoption of the smartphone-based EMA protocol to collect real time report of AB behaviors in the natural environment. The English version of BruxApp is adopted as a template for the multi-language translation, according to a step-by-step procedure led by mother-tongue experts in the field. A dedicated web platform for translation (viz., POEditor) is used. The process of translation into Polish is here described as an example. Results: There are two software versions available, viz., BruxApp and BruxApp Research. For both versions, back translation from Polish to English was performed to verify the accuracy of the translation procedure. The validity of the translation has been confirmed by the perfect agreement between the original and back-translated English versions, and the Polish version of BruxApp can thus be introduced in the clinical and research setting to get deeper into the study of AB epidemiology in Poland. Conclusions: As far as clinical studies are concerned, the described strategy to record data can be very useful-patients can acknowledge their habits, monitor changes over time, and implement remedial measures. In the field of research, BruxApp makes it possible to collect and store a huge amount of data about the epidemiology of different forms of awake bruxism, both at the individual level and at the population level.

Wear of direct resin composites and teeth: considerations for oral rehabilitation.

Little is known about the wear rate of enamel and dentin opposing resin composite following restoration of the occlusal surface in patients with tooth wear. Hence, the aim of this in vitro study was to evaluate the wear of enamel and dentin surfaces when opposing each of three resin composites in a two-body and three-body wear test. The two-body and three-body wear of dentin, enamel, and three resin composites (Clearfil AP-X, Filtek Z250, and Filtek Supreme) opposing four antagonists (stainless steel and three resin composites) were evaluated using the ACTA wear machine. In addition, all the surfaces were evaluated with scanning electron microscopy. The results showed the lowest wear rate in enamel and the highest in dentine, with the composite showing intermediate wear rates. The three-body wear results were not affected by the antagonist and showed pure wear caused by the abrasive food medium. The in vitro enamel/composite wear ratio was 2.5. The results show that tooth wear accelerates as soon as enamel disappears and dentin is exposed to composite resin. Therefore, it is important to protect dentin with a restorative material.

Frequency of temporomandibular disorders diagnoses based on RDC/TMD in a Polish patient population.

OBJECTIVE: To assess the frequency and age distribution of Axis I and Axis II diagnoses among Polish patients with temporomandibular disorders (TMD). METHOD: One hundred sixty-three (n = 163) consecutive adult patients seeking TMD treatment were assessed based on the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) guidelines. Descriptive statistics on the frequency of diagnoses and mean age of the diagnostic groups was performed. RESULT: Frequency of muscle disorders, disc displacements, and other joint disorders was 56.9, 48.9, and 31%, respectively. Disc displacement was the most common diagnosis in younger patients. Severe somatization and depression were shown in 11.9 and 15.8% of patients, respectively. Only 10.5% of the patients showed severe pain-related impairment. Females tended to have higher psychosocial scores than males. DISCUSSION: The frequency of Axis I TMD diagnoses in Polish patients is similar to other populations, whereas Axis II findings slightly differ from previous reports from other countries.

The Prevalence of TMD in Polish Young Adults.

PURPOSE: The prevalence of temporomandibular disorders (TMD) in the general Polish population has not yet been thoroughly investigated. The aim of this study was to determine how frequently Polish young adults demonstrated the signs and symptoms of TMD, and how often they were aware of these. MATERIALS AND METHODS: The study involved 260 volunteers of approximately 18 years of age (and with an F:M ratio of 2.8), who had completed the Research Diagnostic Criteria for Temporomandibular Disorders (RDC/TMD) questionnaire in its internationally accepted Polish version. The volunteers were students from three randomly selected high schools in Kraków, Poland. Following the clinical examinations, all participants received none or one or more of the RDC/TMD axis I diagnoses on one or both sides: muscle disorders (group I), disk displacements (group II), arthralgia, osteoarthritis, and osteoarthrosis (group III). Classification on RDC/TMD axis II involved pain-related impairment (Graded Chronic Pain Severity, from 0: no TMD pain in the prior 6 months, to IV: high disability-severely limiting), depression, and somatization levels (normal, moderate, severe). RESULTS: On the RDC/TMD axis I, 69 (26.5%) of the participants received one or more of the possible diagnoses. Awareness of TMD was present in 20 (7.7%) people from that group, in the form of self-complaints. The difference between females and males was statistically significant (p  = 0.0013). On the RDC/TMD axis II assessment, a diagnosis of pain, depression, or somatization was given in 38 (14.6%) cases from that group. CONCLUSION: Muscle disorders were most frequently diagnosed in the group of Polish young adults, and the prevalence of the disease did not differ across similar groups of young people.

Contact- and contact-free wear between various resin composites.

OBJECTIVE: Nowadays direct and indirect resin composites are frequently applied to build up the occlusion when extensive tooth wear took place. To achieve long-lasting restorations it is essential to obtain knowledge about their interactions due to occlusal contacts. Therefore, the two- and three-body wear between frequently used direct and indirect resin composites was investigated. MATERIALS AND METHODS: The two- and three-body wear of three direct resin composites and three indirect resin composites, with Clearfil AP-X, Filtek Z250, and Filtek Supreme XT as antagonists, were measured, using the ACTA wear device. The wear rates were determined and the surfaces were evaluated with SEM. RESULTS: The most remarkable outcome was that the two-body wear rate of the different composites opposing the Z250 wheel were significantly higher. Furthermore, it was shown that the three-body wear rate was independent on the antagonist and in general higher than the two-body wear rate. CONCLUSIONS: To reduce abrasion of the opposing resin composite surface the resin composite fillers should consist of a softer glass, e.g. barium glass or in case of a harder filler the size should be reduced to nano-size.