ABSTRACT
The recent discovery of the large piezoelectric response of Pb(Mg1/3Nb2/3)O3-PbTiO3 (PMN-PT) ceramics induced by samarium doping has provided a substantially improved functionality to the group of lead-based relaxor-ferroelectric materials. Different mechanisms have been so far proposed for the large piezoelectricity; however, the explanations are contradictory and focused on a unified description. Here, we use nonlinear harmonic piezoelectric measurements combined with multiscale structural analysis to clarify the origins of the ultrahigh piezoelectric response of samarium-doped PMN-PT. Our methodological approach allowed us to separate the multiple piezoelectric contributions, revealing their quantitative role in the total response. The results show that the ultrahigh piezoelectricity cannot be attributed to a single mechanism but is rather a complex combination of different contributions originating from the multiple effects of samarium doping on the long- and short-range structure of PMN-PT. The study offers a baseline for future engineering of the key material parameters affecting the large piezoelectric response of relaxor-ferroelectric ceramics.
ABSTRACT
Recently, piezoelectric-based catalysis has been demonstrated to be an efficient means and promising alternative to sunlight-driven photocatalysis, where mechanical vibrations trigger redox reactions. Here, 60 nm-size BiFeO3 nanoparticles are shown to be very effective for piezo-degrading Rhodamine B (RhB) model dye with record degradation rate reaching 13 810 L mol-1 min-1 , and even 41 750 L mol-1 min-1 (i.e., 100% RhB degradation within 5 min) when piezocatalysis is synergistically combined with sunlight photocatalysis. These BiFeO3 piezocatalytic nanoparticles are also demonstrated to be versatile toward several dyes and pharmaceutical pollutants, with over 80% piezo-decomposition within 120 min. The maintained high piezoelectric coefficient combined with low dielectric constant, high-elastic modulus, and the nanosized shape make these BiFeO3 nanoparticles extremely efficient piezocatalysts. To avoid subsequent secondary pollution and enable their reusability, the BiFeO3 nanoparticles are further embedded in a polymer P(VDF-TrFE) matrix. The as-designed flexible, chemically stable, and recyclable nanocomposites still keep remarkable piezocatalytic and piezo-photocatalytic performances (i.e., 92% and 100% RhB degradation, respectively, within 20 min). This work opens a new research avenue for BiFeO3 that is the model multiferroic and offers a new platform for water cleaning, as well as other applications such as water splitting, CO2 reduction, or surface purification.
ABSTRACT
The main limitations of current methods for synthesizing perovskite oxide (ABO3 ) nanoparticles (NPs), e.g., the high reagent costs and sophisticated equipment, the long time and high-temperature processing, or multiple post-processing and thermal treatment steps, hamper their full study and potential application. Here, we use a facile low temperature (50 °C) chemical bath synthesis and only one annealing step to successfully produce high phase purity and crystalline quality nano-shaped rare-earth-based REMO3 NPs (RE=La, Nd, Sm, Gd; M=Fe, Mn, Al). We also show the versatility of this approach by fabricating La0.7 Sr0.3 MnO3 solid solution and non-RE-based BiFeO3 perovskite. To assess the potential of the as-prepared REFeO3 and REMnO3 NPs, they are used for photocatalytic degradation of the norfloxacin antibiotic and show high efficiency. We believe this easy, robust, versatile, and general route for synthesizing ABO3 -based NPs can be further explored in the vast perovskite family and beyond.
ABSTRACT
Soy isoflavone genistein (Gen) exerts beneficial effects against prostate cancer cells in vitro and in vivo. However, its use as a chemoprevention/therapeutic agent is largely limited due to its low bioavailability. In this study we synthesized two variants of a new delivery system, genistein-gold nanoparticles conjugates Gen@AuNPs1 and Gen@AuNPs2, by an environmentally friendly method, using a dual role of Gen to reduce Au3+ and stabilize the formed AuNPs, with no additional component. The formation of Gen@AuNPs was confirmed via UV-Vis spectroscopy, FTIR, and Raman spectra measurements. The spherical shape and uniform size of Gen@AuNPs1 and Gen@AuNPs2 (10 ± 2 and 23 ± 3 nm, respectively), were determined by transmission electron microscopy. The nano-conjugates also varied in hydrodynamic diameter (65.0 ± 1.7 and 153.0 ± 2.2 nm) but had similar negative zeta potential (-35.0 ± 2.5 and -37.0 ± 1.6 mV), as measured by dynamic light scattering. The Gen loading was estimated to be 46 and 48%, for Gen@AuNPs1 and Gen@AuNPs2, respectively. The antiproliferative activities of GenAuNPs were confirmed by MTT test in vitro on three malignant prostate carcinoma cell lines (PC3, DU 145, and LNCaP), while selectivity toward malignant phenotype was confirmed using non-cancerous MRC-5 cells. Flow cytometric analysis showed that the inhibition on cell proliferation of more potent Gen@AuNPs1 nano-conjugate is comparable with the effects of free Gen. In conclusion, the obtained results, including physicochemical characterization of newly synthesized AuNPs loaded with Gen, cytotoxicity, and IC50 assessments, indicate their stability and bioactivity as an antioxidant and anti-prostate cancer agent, with low toxicity against human primary cells.
Subject(s)
Metal Nanoparticles , Prostatic Neoplasms , Cell Line , Genistein/pharmacology , Gold , Humans , Male , Prostatic Neoplasms/drug therapyABSTRACT
We report on a heterogeneity study, down to the atomic scale, on a representative multiple-element-modified ceramic based on potassium sodium niobate (KNN): 0.95(Na0.49K0.49Li0.02)(Nb0.8Ta0.2)O3-0.05CaZrO3 with 2 wt % MnO2. We show that different routes for incorporating the MnO2 (either before or after the calcination step) affect the phase composition and finally the functionality of the material. According to X-ray diffraction and scanning electron microscopy analyses, the ceramics consist of orthorhombic and tetragonal perovskite phases together with a small amount of Mn-rich secondary phase. The addition of MnO2 after the calcination results in better piezoelectric properties, corresponding to a ratio between the orthorhombic and tetragonal perovskite phases that is closer to unity. We also show, using microscopy techniques combined with analytical tools, that Zr-rich, Ta-rich and Mn-rich segregations are present on the nano and atomic levels. With this multi-scale analysis approach, we demonstrate that the functional properties are sensitive to minor modifications in the synthesis route, and consequently to different material properties on all scales. We believe that detecting and learning how to control these modifications will be a step forward in overcoming the irreproducibility problems with KNN-based materials.
ABSTRACT
We report a simple and green procedure for the preparation of magnetic iron oxide nanocrystals via solvothermal synthesis. The nanocrystal synthesis was carried out under mild conditions in the water-ethanol-oleic acid solvent system with the use of the oleate anion as a surface modifier of nanocrystals and glucose as a reducing agent. Specific conditions for homogenous precipitation achieved in such a reaction system lead to the formation of uniform high-quality nanocrystals down to 5 nm in diameter. The obtained hydrophobic nanocrystals can easily be converted to hydrophilic magnetic nanoparticles by being immobilized in a poly(L-lactide)-polyethyleneimine polymeric matrix. These hybrid nano-constructs may find various biomedical applications, such as magnetic separation, gene transfection and/or magnetic resonance imaging.
Subject(s)
Ferric Compounds/chemical synthesis , Magnetite Nanoparticles/chemistry , Polyesters/chemistry , Polyethyleneimine/chemistry , Temperature , Ferric Compounds/chemistry , Magnetic Fields , Particle Size , Solubility , Surface PropertiesABSTRACT
The local crystal and domain structures of the ((Na(1-x)K(x))(0.5)Bi(0.5)TiO(3) (NBT-KBT) solid solutions were studied because of their influence on the enhanced electromechanical properties of ceramics. Based on X-ray diffraction, the morphotropic phase boundary (MPB) was determined for the composition x = 0.20, in which the rhombohedral and the tetragonal structures were observed to coexist. However, detailed domain-structure analyses using transmission electron microscopy (TEM), performed on the NBT, KBT, and five NBT-KBT solid-solution compositions, revealed some structural changes at/near the MPB. In the samples on the tetragonal side of the MPB, the grains showed a lamellar domain structure with 90° orientations of the individual domains, separated by straight domain boundaries, i.e., (011)/(101) twin planes. The rhombohedral samples on the other side of the MPB showed a typical square-net pattern with needle-like or lamellar ~71°/109° rhombohedral domains with (001) and/or (110) twin planes separating the individual domains. The domain structure at the MPB showed well-defined lamellar domains. Based on the occurrence of the superstructure reflections in the SAED patterns of various crystallographic zones, on the characteristic splitting of the reflections, and on the domain morphology observations, the crystal structure in/near the boundary region was determined to be a tetragonal structure with an in-phase oxygen octahedral tilt system (probably a(0)a(0)c(+)). It is suggested that the tetragonal polar order is partly induced from the rhombohedral structure at the MPB as a result of mechanical loading during TEM sample preparation.