Design of the Lanthanum hexaboride based plasma source for the large plasma device at UCLA.

The Large Plasma Device (LAPD) at UCLA (University of California, Los Angeles) produces an 18 m long, magnetized, quiescent, and uniform plasma at a high repetition rate to enable studies of fundamental plasma physics. Here, we report on a major upgrade to the LAPD plasma source that allows for more robust operation and significant expansion of achievable plasma parameters. The original plasma source made use of a heated barium oxide (BaO) coated nickel sheet as an electron emitter. This source had a number of drawbacks, including a limited range of plasma density (≲4.0 × 1012 cm-3), a limited discharge duration (∼10 ms), and susceptibility to poisoning following oxygen exposure. The new plasma source utilizes a 38 cm diameter lanthanum hexaboride (LaB6) cathode, which has a significantly higher emissivity, allowing for a much larger discharge power density, and is robust to exposure to air. Peak plasma density of up to 3.0 × 1013 cm-33 in helium gas has been achieved. The typical operating pressure is ∼10-5 Torr, while dynamic pressure can be achieved through the gas-puffing technique. Discharges as long as 70 ms have been produced, enabling a variety of long-time-scale studies of processes, such as turbulent particle transport. The new source has been in continuous operation for 14 months, having survived air leaks, power outages that led to rapid temperature changes on the cathode and heater, and planned machine openings. We describe the design, construction, and initial operation of this novel new large-area LaB6 plasma source.

In situ microscopy for plasma erosion of complex surfaces.

A novel method for the in situ visualization and profilometry of a plasma-facing surface is demonstrated using a long-distance microscope. The technique provides valuable in situ monitoring of the microscopic temporal and morphological evolution of a material surface subject to plasma-surface interactions, such as ion-induced sputter erosion. Focus variation of image stacks enables height surface profilometry, which allows a depth of field beyond the limits associated with high magnification. As a demonstration of this capability, the erosion of a volumetrically featured aluminum foam is quantified during ion-bombardment in a low-temperature argon plasma where the electron temperature is ∼7 eV and the plasma is biased relative to the target surface such that ions impinge at ∼300 eV. Three-dimensional height maps are reconstructed from the images captured with a long-distance microscope with an x-y resolution of 3 × 3 µm2 and a focus-variation resolution based on the motor step-size of 20 µm. The time-resolved height maps show a total surface recession of 730 µm and significant ligament thinning over the course of 330 min of plasma exposure. This technique can be used for developing plasma-facing components for a wide range of plasma devices for applications such as propulsion, manufacturing, hypersonics, and fusion.

Mix-and-diffuse serial synchrotron crystallography.

Unravelling the interaction of biological macromolecules with ligands and substrates at high spatial and temporal resolution remains a major challenge in structural biology. The development of serial crystallography methods at X-ray free-electron lasers and subsequently at synchrotron light sources allows new approaches to tackle this challenge. Here, a new polyimide tape drive designed for mix-and-diffuse serial crystallography experiments is reported. The structure of lysozyme bound by the competitive inhibitor chitotriose was determined using this device in combination with microfluidic mixers. The electron densities obtained from mixing times of 2 and 50 s show clear binding of chitotriose to the enzyme at a high level of detail. The success of this approach shows the potential for high-throughput drug screening and even structural enzymology on short timescales at bright synchrotron light sources.