Greatly isolated heterogeneous circulating tumor cells using hybrid engineered cell membrane-camouflaged magnetic nanoparticles.

BACKGROUND: Circulating tumor cells (CTCs) are considered as a useful biomarker for early cancer diagnosis, which play a crucial role in metastatic process. Unfortunately, the tumor heterogeneity and extremely rare occurrence rate of CTCs among billions of interfering leukocytes seriously hamper the sensitivity and purity of CTCs isolation. METHODS: To address these, we firstly used microfluidic chips to detect the broad-spectrum of triple target combination biomarkers in CTCs of 10 types of cancer patients, including EpCAM, EGFR and Her2. Then, we constructed hybrid engineered cell membrane-camouflaged magnetic nanoparticles (HE-CM-MNs) for efficient capture of heterogeneous CTCs with high-purity, which was enabled by inheriting the recognition ability of HE-CM for various CTCs and reducing homologous cell interaction with leukocytes. Compared with single E-CM-MNs, HE-CM-MNs showed a significant improvement in the capture efficiency for a cell mixture, with an efficiency of 90%. And the capture efficiency of HE-CM-MNs toward 12 subpopulations of tumor cells was ranged from 70 to 85%. Furthermore, by using HE-CM-MNs, we successfully isolated heterogeneous CTCs with high purity from clinical blood samples. Finally, the captured CTCs by HE-CM-MNs could be used for gene mutation analysis. CONCLUSIONS: This study demonstrated the promising potential of HE-CM-MNs for heterogeneous CTCs detection and downstream analysis.

An Evolutionary Review of Hemoperfusion Adsorbents: Materials, Preparation, Functionalization, and Outlook.

Accumulation of pathogenic factors in the blood may cause irreversible damage and may even be life-threatening. Hemoperfusion is an effective technique for eliminating pathogenic factors, which is widely used in the treatment of various diseases including liver failure, renal failure, sepsis, and others. Hemoperfusion adsorbents are crucial in this process as they specifically bind and remove the target pathogenic factors. This review describes the development of hemoperfusion adsorbents, detailing the different properties exhibited by inorganic materials, organic polymers, and new materials. Advances in natural and synthetic polymers and novel materials manufacturing techniques have driven the expansion of hemoperfusion adsorbents in clinical applications. Stimuli-responsive (smart responsive) adsorbents with controllable molecular binding properties have many promising and environmentally friendly biomedical applications. Knowledge gaps, future research directions, and prospects for hemoperfusion adsorbents are discussed.

TiO2/Polystyrene Nanocomposite Antibacterial Material as a Hemoperfusion Adsorbent for Efficient Bilirubin Removal and Prevention of Bacterial Infection.

The use of hemoperfusion adsorbents for the removal of bilirubin in patients with liver failure has become a critical treatment. However, the insufficient clearance of bilirubin and the possibility of bacterial infection during hemoperfusion limit the application. In this work, we designed a novel antibacterial bilirubin adsorbent (PSVT) through the suspension polymerization reaction between double-bond functionalized TiO2 nanoparticles and styrene. PSVT showed an excellent bilirubin adsorption ability and antibacterial performance, ensuring efficient clearance of bilirubin in liver failure patients during hemoperfusion and preventing bacterial infection. The experimental results indicated that TiO2 was uniformly dispersed in the microspheres, which improved the mesoporous structure and increased the specific surface area. Composite adsorbent PSVT showed an exceptional bilirubin adsorption capacity, with the maximum adsorption capacity reaching 24.3 mg/g. In addition, the introduction of TiO2 endowed PSVT with excellent antibacterial ability; the ultimate antibacterial rates against Escherichia coli and Staphylococcus aureus reached 97.31 and 96.47%, respectively. In summary, PSVT served as a novel antibacterial bilirubin adsorbent with excellent bilirubin clearance capacity and antibacterial performance, providing excellent application prospects for treating liver failure patients.

Dual Stealth Functional Immuno-magnetic Nanoparticles for High-Performance Isolation of Circulating Tumor Cells.

As a biomarker of hepatocellular carcinoma (HCC) biopsy, circulating tumor cells (CTCs) are often used in the diagnosis of cancer and treatment guidance. For CTCs detection, immuno-magnetic nanoparticles (IMNs) are one of the most commonly used platforms. However, the nonspecific adsorption of proteins and non-tumor cells weakens the performance of IMNs to capture CTCs. In this work, we developed an IMNs platform which was constructed by a biomimetic protein corona precoating and a polyethylene glycol (PEG) spacer to form the PEG and corona-coated IMNs (IP-CMNs). Due to the dual stealth effect of protein corona precoating and PEG spacer, the nonspecific protein adsorption and cell binding of P-CMNs could reduce by ∼5.5- and ∼5.4-fold, respectively, compared with those of unmodified particles. Furthermore, the PEG spacer could not only reduce the interaction between IP-CMNs and leukocytes but also enhance the capture performance toward tumor cells. By using artificial blood samples, the capture efficiency of IP-CMNs toward rare CTCs was found to be 88.3%, while it was 70.5% by using commercial IMNs. Finally, CTCs were successfully isolated in all HCC patient blood samples (7/7) using IP-CMNs. These results provide insight into the use of the multifunctional nanoplatform as a useful tool for CTCs detection.

Photorenewable Azobenzene Polymer Brush-Modified Nanoadsorbent for Selective Adsorption of LDL in Serum.

The elevated concentration of low-density lipoprotein (LDL) is recognized as a leading factor of hyperlipidemia (HLP), and selective adsorption of serum LDL is regarded as a practical therapy. Based on the superior structure-function characteristics of stimuli-responsive materials, a photorenewable nanoadsorbent (SiO2@Azo@Gly) with high selectivity and reusability was developed using azobenzene as the functional ligand. Its principle was certified by the preparation of silicon nanoparticles with atom transfer radical polymerization (ATRP)-initiating groups via a sol-gel reaction and their subsequent grafting of azobenzene polymer brushes by surface-initiated ATRP, followed by modification with glycine. Immobilization of carboxylated azobenzene polymer brushes onto the nanoparticles endowed SiO2@Azo@Gly with high adsorption selectivity and reusability. The advanced nanoadsorbent exhibited excellent LDL adsorption capacity at about 27 mg/g and could be regenerated by illumination with high efficiency (circulations ≥ 5); this was further verified by transmission electron microscopy (TEM) and Fourier-transform infrared (FTIR) analysis. SiO2@Azo@Gly also demonstrated superior adsorption efficiency and selectivity in serum from HLP patients, the respective adsorption capacities of LDL, triglyceride, and total cholesterol were about 15.65, 24.48, and 28.36 mg/g, and the adsorption to high-density lipoprotein (cardioprotective effect) was only about 3.66 mg/g. Green regeneration of the nanoadsorbent could be achieved completely through a simple photoregeneration process, and the recovery rate was still 97.9% after five regeneration experiments.

Amphiphilic shell nanomagnetic adsorbents for selective and highly efficient capture of low-density lipoprotein from hyperlipidaemia serum.

Removal of low-density lipoprotein (LDL) from hyperlipemia patients' blood represents an effective approach to prevent the progression of atherosclerotic cardiovascular disease. Based on the LDL structural characteristics and intermolecular interactions, a tailored nano-adsorbent (Fe3O4@SiO2@PAA-PE) was prepared aimed at the removal of LDL from hyperlipemia serum with high selectivity. The core-shell structured magnetic nanoparticles were embedded in an amphiphilic layer composed of hydrophilic poly(acrylic acid) and lipophilic phospholipids to provide multifunctional binding for LDL particles. The results of dynamic light scattering, water contact angle and zeta-potential measurements, thermal gravimetric analysis, and X-ray photoelectron spectroscopy together with Fourier transform infrared spectroscopy confirmed the core-shell structured nanoparticles bearing amphiphilic poly acrylic acid and phospholipid molecules. Because of the superior electronegativity of the functional layer, the nano-adsorbent demonstrated favorable adsorption selectivity against high-density lipoprotein, which possesses a similar structure to LDL but has a cardio-protective function in the human body. The respective adsorption capacity of Fe3O4@SiO2@PAA-PE towards LDL, total cholesterol and triglycerides reached up to 6.26 mg g-1, 8.41 mg g-1 and 9.19 mg g-1, which was 7.03, 9.45 and 10.32 times that towards HDL (0.89 mg g-1). The kinetic and isothermal studies revealed that multiple interactions containing both physical and chemical adsorption occurred in the binding procedure between LDL and Fe3O4@SiO2@PAA-PE, and chemical adsorption may play a more predominant role in LDL adsorption. The nano-adsorbent also had negligible effects on blood cells, and possessed satisfactory recyclability, low cytotoxicity and hemolysis ratios, indicating its good application prospects as a hemoperfusion adsorbent in the treatment of hyperlipidaemia.

Protein corona-coated immunomagnetic nanoparticles with enhanced isolation of circulating tumor cells.

Immunomagnetic nanoparticles (IMNs) have been widely developed as a detection tool to isolate rare circulating tumor cells (CTCs) from whole blood as a potential method for early cancer diagnosis, metastasis examination, and treatment guidance. However, a spontaneous interaction between nanoparticles and proteins results in the formation of a protein corona that reduces the performance of IMNs when they enter body fluids. To address this issue, the protein corona was precoated onto magnetic nanoparticles (C-MNs), and then their surfaces were conjugated with an immuno-antibody. The adsorption of proteins on C-MNs was decreased 6-fold and non-specific cell binding was reduced 5-fold, compared with magnetic nanoparticles (MNs). Furthermore, the immuno-antibody functionalized C-MNs (IC-MNs) maintained highly specific CTC capture performance when exposed to blood plasma. By using artificial spiked blood samples, IC-MNs exhibited 90.2% CTC isolation efficiency, compared with 60.3% by using IMNs. IC-MNs also successfully captured CTCs with high purity in 24 out of 26 female breast cancer patient blood samples. This work demonstrated that a novel preformed protein corona strategy can provide a useful clinically applicable diagnostic tool.

Biomembrane-mimetic hemoperfusion adsorbent for efficient removal of low-density lipoprotein from hyperlipemia blood.

Lowering of low-density lipoprotein (LDL) levels in blood of patients with hyperlipidaemia can effectively prevent the progression of atherosclerosis and coronary heart disease. The present study demonstrated a facile synthesis strategy to prepare biomembrane-mimetic LDL adsorbent (PVA@COOH-PE) via directional immobilization of phospholipid onto macro-porous cross-linked poly(vinyl alcohol) spheres. The binding between the prepared adsorbent and LDL particles simulates the cytosolic lipid droplets to form a lipid-packing structure. The adsorbent possesses satisfactory removal efficiency for LDL and total cholesterol (TCH) in hyperlipemia serum, while remains high-density lipoprotein (HDL) concentration within the normal range. The adsorption capacities for LDL and TCH are about 1.13 and 1.74 mg/ml respectively, which are nearly three and four times higher than that of HDL (0.42 mg/ml). The adsorbent also possesses satisfactory anticoagulant properties, causes negligible effect on blood cells and produces low hemolysis ratios. The excellent blood compatibility plus LDL removal efficiency of PVA@COOH-PE indicates its good application prospect as hemoperfusion adsorbent in the treatment of hyperlipidaemia.

Biomimetic Design of Artificial Hybrid Nanocells for Boosted Vascular Regeneration in Ischemic Tissues.

Restoration of sufficient blood supply for the treatment of ischemia remains a significant scientific and clinical challenge. Here, a cell-like nanoparticle delivery technology is introduced that is capable of recapitulating multiple cell functions for the spatiotemporal triggering of vascular regeneration. Specifically, a copper-containing protein is successfully prepared using a recombinant protein scaffold based on a de novo design strategy, which facilitates the timely release of nitric oxide and improved accumulation of particles within ischemic tissues. Through closely mimicking physiological cues, the authors demonstrate the benefits of bioactive factors secreted from hypoxic stem cells on promoting angiogenesis. Following this cell-mimicking manner, artificial hybrid nanosized cells (Hynocell) are constructed by integrating the hypoxic stem cell secretome into nanoparticles with surface coatings of cell membranes fused with copper-containing protein. The Hynocell, hybridized with different cell-derived components, provides synergistic effects on targeting ischemic tissues and promoting vascular regeneration in acute hindlimb ischemia and acute myocardial infarction models. This study offers new insights into the utilization of nanotechnology to potentiate the development of cell-free therapeutics.

The development of immunosorbents for the treatment of systemic lupus erythematosus via hemoperfusion.

Systemic lupus erythematosus (SLE) is an autoimmune disease (AID) that involves multiple organ systems and is characterized by elevated levels of autoantibodies (ANA) and immune complexes. The immunoadsorption technique uses an extracorporeal clearance process to remove pathogenic toxins from patients' blood and alleviate disease symptoms. An immunosorbent is a key component of the immunoadsorption system that determines therapeutic efficacy and safety. Immunosorbents are prepared by immobilizing antibodies, antigens, or ligands with specific physicochemical affinities on a supporting matrix. Immunosorbents and pathogenic toxins bind via affinity adsorption, which involves electrostatic interactions, hydrogen bonds, hydrophobic interactions, and van der Waals forces. Immunosorbents are classified on the basis of their interaction mechanism with toxins into three categories: non-selective, semi-selective, and highly selective. This review aimed to summarize the current status of various commercial immunosorbents that are used to treat SLE. Moreover, recent developments in immunosorbents have heightened the need for a brief discussion about specific ligands and a supporting matrix.

Bio-inspired dual-functional phospholipid-poly(acrylic acid) brushes grafted porous poly(vinyl alcohol) beads for selective adsorption of low-density lipoprotein.

Elevated levels of low-density lipoproteins (LDL) are recognized as a crucial indicator of hyperlipidemia (HLP) and lowering of LDL levels represents an effective clinical treatment strategy. Inspired by the conjugation of phospholipid monolayers and the lipid content of the LDL particle, the current study describes the preparation of an innovative hemoperfusion adsorbent. The adsorbent was prepared by attachment of phosphatidyl ethanolamine to poly(acrylic acid) modified poly(vinyl alcohol-co-triallyl isocyanurate) beads (PVA@PAA-PE). The interaction between LDL and adsorbent mimics the lipoprotein microemulsion present in the blood and thus promotes efficient binding with high affinity. In vitro adsorption using serum from patients with HLP revealed that the LDL adsorption of PVA@PAA-PE was 4.44 times higher than that of controls and the removal rate of LDL using PVA@PAA-PE was about twice as high as that of the anti-atherogenic high-density lipoprotein (HDL). In vivo whole blood perfusion demonstrated the superior affinity of PVA@PAA-PE for LDL since LDL concentration was significantly reduced from 10.71 ± 2.36 mmol L-1 to 6.21 ± 1.45 mmol L-1, while the HDL level was not severely reduced (from 0.98 ± 0.12 mmol L-1 to 0.56 ± 0.15 mmol L-1). Additionally, PVA@PAA-PE exhibited excellent hemocompatibility and low cytotoxicity. Therefore, PVA@PAA-PE is a potential adsorbent for whole blood perfusion to treat hyperlipidemia.

Hydroxyapatite reinforced inorganic-organic hybrid nanocomposite as high-performance adsorbents for bilirubin removal in vitro and in pig models.

Highly efficient removal of bilirubin from whole blood directly by hemoperfusion for liver failure therapy remains a challenge in the clinical field due to the low adsorption capacity, poor mechanical strength and low biocompatibility of adsorbents. In this work, a new class of nanocomposite adsorbents was constructed through an inorganic-organic co-crosslinked nanocomposite network between vinyltriethoxysilane (VTES)-functionalized hydroxyapatite nanoparticles (V-Hap) and non-ionic styrene-divinylbenzene (PS-DVB) resins (PS-DVB/V-Hap) using suspension polymerization. Notably, our adsorbent demonstrated substantially improved mechanical performance compared to the pure polymer, with the hardness and modulus increasing by nearly 3 and 2.5 times, respectively. Moreover, due to the development of a mesoporous structure, the prepared PS-DVB/V-Hap3 exhibited an ideal adsorption capacity of 40.27 mg g-1. More importantly, the obtained adsorbent beads showed outstanding blood compatibility and biocompatibility. Furthermore, in vivo extracorporeal hemoperfusion verified the efficacy and biosafety of the adsorbent for directly removing bilirubin from whole blood in pig models, and this material could potentially prevent liver damage and improve clinical outcomes. Taken together, the results suggest that PS-DVB/V-Hap3 beads can be used in commercial adsorption columns to threat hyperbilirubinemia patients through hemoperfusion, thus replacing the existing techniques where plasma separation is initially required.

Targeting regulation of the tumour microenvironment induces apoptosis of breast cancer cells by an affinity hemoperfusion adsorbent.

The cytokine network of tumour microenvironment (TME) plays an important role in cancer growth and progression. The current work aims to provide a new strategy for cancer therapy based on the targeted regulation of cytokines in the TME. Here, heparin-coupled polyvinyl alcohol (PVA-H) microspheres have been developed as an adsorbent for selectively remove tumour-induced immunosuppressive cytokines, such as vascular endothelial growth factor (VEGF) and transforming growth factor-beta (TGF-ß), but not tumour necrosis factor-alpha (TNF-α) which has an immune-stimulating effect and can inhibit tumour growth. The proliferation and apoptosis of breast cancer cells after perfusion were tested by cell viability assays, flow cytometry analysis and mRNA microarray assays. Results showed that the PVA-H microspheres efficiently absorbed the majority of VEGF (74.39%) and TGF-ß (86.39%), but much less TNF-α (4.16%). The regulation of the cytokines had remarkable anti-proliferative and pro-apoptotic effects on breast cancer cells, which was further confirmed from the change of mRNA expression levels. Thus, targeting regulatory pathways within the TME by an affinity adsorbent that selectively depletes immunosuppressive cytokines is potentially a new and promising strategy for cancer therapy.

Functionalized Carbon Nanotube-Embedded Poly(vinyl alcohol) Microspheres for Efficient Removal of Tumor Necrosis Factor-α.

Tumor necrosis factor (TNF)-α has an important role in the pathogenesis of autoimmune and inflammatory diseases such as rheumatoid and septic arthritis. Removal of excess tumor necrosis factor-α (TNF-α) is a promising treatment. In this study, a series of functionalized carbon nanotube-embedded poly(vinyl alcohol) (PVA) nanocomposite adsorbents were prepared for TNF-α removal for the first time. The resulting nanocomposites were characterized by scanning electron microscopy and Raman spectroscopy, which demonstrated that carbon nanotubes were well-dispersed on the surface of PVA macroporous microspheres. Adsorption tests showed that the carboxylated carbon nanotube-embedded composite microspheres (PVA/MWCNTs-COOH) possessed much better adsorption capacity for TNF-α in both simulated serum solution and rat plasma compared to the aminated (PVA/MWCNTs-NH2) and raw carbon nanotube-embedded microspheres (PVA/MWCNTs-raw). In addition, the effects on hemolytic activity, the anticoagulant property, and the components of blood were negligible, indicating the excellent blood compatibility of composite beads. Our findings suggest that the carboxylated carbon nanotube-embedded composite microspheres may be potentially useful for the treatment of autoimmune and inflammatory diseases by removing TNF-α from the blood.

Selective adsorption of bilirubin against albumin to alkylamine functionalized PVA microspheres.

Adsorbents are widely used in hemoperfusion for bilirubin removal. However, their performance is often compromised by the presence of plasma proteins. In this study, the bilirubin adsorption capacity of polyvinyl alcohol microspheres (PVAm) functionalized with different amino-alkane ligands has been investigated, with the aim of gaining binding selectivity over albumin. Octylamine-functionalized PVA microspheres (PVAm-8) exhibited an excellent adsorption capacity for bilirubin (75% and 3.95 mg/mL in PBS vs 72% and 3.84 mg/mL in albumin solution) when compared to the clinical adsorbent BPR (92% and 4.84 mg/mL in PBS vs 71%, and 3.80 mg/mL in albumin solution). The bilirubin adsorption capacities of PVAm-8 were largely unaffected by the presence of albumin. Adsorption of bilirubin to PVAm-8 occurs mainly through hydrophobic effects, with adsorption consistent with the monolayer model and the pseudo-first-order model operating in both PBS and albumin solution. The effects of PVAm-8 on hemolytic activity, blood component stability and coagulant activity were negligible, indicating that PVAm-8 has good potential as a high-affinity bilirubin adsorbent for hemoperfusion applications.

Bead-type polystyrene/nano-CaCO3 (PS/nCaCO3) composite: a high-performance adsorbent for the removal of interleukin-6.

A novel nano-CaCO3 (nCaCO3) particle composite-derived polystyrene (PS) resin was successfully synthesized by a suspension polymerization method. The nCaCO3 reinforced PS material (PS/nCaCO3) possessed a structure with abundant mesopores of high porosity, high specific surface area (828.3 m2 g-1) and large pore volume (1.83 cm3 g-1). It was revealed that the incorporation of nCaCO3 into the PS matrix enhanced both the mechanical strength which can prevent the fragmentation and its adsorption capacity for interleukin-6 (IL-6, MW = 24.0 kDa) from human plasma. The adsorption isotherm could be described by the Langmuir model and classified as S-3 type, showing an IL-6 uptake of up to 25.6 ng g-1 at an equilibrium concentration of about 500 ng L-1. The adsorption capacity for IL-6 of PS/nCaCO3 is not only significantly higher than that of PS (without nCaCO3), but also superior to those of currently available adsorbents that are under clinical studies (e.g., CytoSorb™ towards cytokines). In addition, the PS/nCaCO3 adsorbent also had good hemocompatibility and showed no leakage of nCaCO3 in the plasma in a flowing model system. Therefore, the synthesized PS/nCaCO3 nano-composite has a great potential to be used as an efficient adsorbent for the removal of interleukin-6 (IL-6) from blood of inflammatory and auto-immune disease patients through hemoperfusion.

Computer-aided design of short peptide ligands targeting tumor necrosis factor-alpha for adsorbent applications.

Tumor necrosis factor alpha (TNF-α) is a pro-inflammatory cytokine active in the bodily immune response and serious inflammatory diseases. Traditional ligands targeting TNF-α focus on antibodies and receptors, which always associate with low efficacy and specificity. In the present study, two peptide ligands (T1: Ac-RKEM-NH2 and T2: Ac-RHCLS-NH2) were designed by computer simulation technology considering the weak interactions between TNF-α and its receptor TNFR1. Calculations of binding free energy (BFE) were made by the Molecular Mechanics Poisson-Boltzmann Surface Area (MM-PBSA) method between T1 or T2 and TNF-α (-22.68 and -14.23 kcal mol-1, respectively). To assess the affinity levels, short peptide ligands were fixed on polyvinyl alcohol (PVA) microspheres; adsorption tests showed a stronger affinity of both PVA-T1 and PVA-T2 to TNF-α in PBS buffer than PVA microspheres (79.20 ± 1.32 and 74.27 ± 1.10 vs. 39.03 ± 1.25 pg mg-1, respectively). Moreover, PVA-T1 (74.8%, 17.60 ± 2.98 pg mg-1) and PVA-T2 (63.2%, 15.30 ± 4.81 pg mg-1) exhibit significantly enhanced TNF-α adsorption from the plasma of rats with sepsis to blank PVA and commercial XAD-7 resin. In conclusion, our results show that T1 designed by computer-aided molecular design (CAMD) exhibits a stronger affinity to TNF-α and it can significantly enhance PVA microsphere adsorption efficiency of TNF-α in plasma.

Preparation of chitosan/amino multiwalled carbon nanotubes nanocomposite beads for bilirubin adsorption in hemoperfusion.

Chitosan-carbon nanotube composite beads combines the advantages of chitosan in forming a stable biocompatible framework and carbon nanotube that provide nanometer effects (high strength and high specific surface area etc.). In this study, chitosan/amino multiwalled carbon nanotubes (CS/AMWCNT) composite beads was prepared by phase-inversion method, in which CS and AMWCNT was crosslinked by ethylene glycol diglycidyl ether (EGDE). The CS/AMWCNT nanocomposite beads produced has been characterized by BET, SEM, TGA, and Raman spectroscopy which exhibited enhanced thermal stability due to the incorporation of AMWCNT. Mechanical test results showed that mechanical strength of the CS/AMWCNT composite beads was significantly enhanced when comparing to unmodified chitosan beads, the breakage percentage decreased from 34.1% to 0.67%. The adsorption capacity for bilirubin was measured in PBS and BSA solutions, and the CS/AMWCNT composite beads with 5 wt% AMWCNT showed much higher adsorption capacity (12.7 mg/g in PBS and 7.6 mg/g in BSA) to bilirubin than chitosan beads (8.5 mg/g in PBS and 4.2 mg/g in BSA). Our nanocomposite beads with excellent hemocompatibility has a high potential application in blood purification as an efficient adsorbent for bilirubin. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part B: Appl Biomater, 106B: 96-103, 2018.

Preparation of PVA/amino multi-walled carbon nanotubes nanocomposite microspheres for endotoxin adsorption.

A novel polyvinyl alcohol-amino multi-walled carbon nanotube (PVA-AMWCNT) nanocomposite microsphere was prepared successfully for the first time and used for endotoxin removal. The resulting AMWCNT modified PVA microsphere was characterized by SEM, Raman spectrum and fluorescence image, which indicated AMWCNT was dispersed into the macropores of PVA microsphere uniformly. The PVA-AMWCNT microspheres showed better adsorption capability and faster adsorption equilibrium for endotoxin in aqueous solution when compared to the PVA microsphere with polymyxin B (PMB) as ligand. More noteworthy, the PVA based microspheres had little nonspecific adsorption in simulated serum. Therefore, PVA-AMWCNT nanocomposite microsphere with an excellent haemocompatibility has a great potential application in clinical blood purification.

Preparation of nano-CaCO3/polystyrene nanocomposite beads for efficient bilirubin removal.

A novel nano-CaCO3/polystyrene nanocomposite adsorbent (NPS-8) was synthesized for efficient bilirubin removal from human plasma. A comparison with the polystyrene adsorbent (PS-8), which was without the incorporation of nano-CaCO3, revealed that NPS-8 had superior bilirubin adsorption capacity and mechanical strength. The resulting nano-CaCO3 reinforced PS-8 (NPS-8) was tested by transmission electron microscopy (TEM), scanning electron microscopy (SEM), mechanical strength test, and bilirubin adsorption assays. The adsorption results indicated that NPS-8 displayed better adsorption capacity for bilirubin (91%) than that of PS-8 (75.88%). The mechanical strength of NPS-8 was significantly greater than that of PS-8. In addition, both PS-8 and NPS-8 possessed good blood compatibility properties (a negligible hemolytic activity and platelet adhesion). Therefore, a conclusion could be drawn that NPS-8 has a high potential as an efficient bilirubin adsorbent for blood purification in clinical practice. At the same time, the success of organic-inorganic nanocomposite adsorbents might provide a new insight into the improvement of adsorbents in hemoperfusion.