A Bioinspired Elastic Hydrogel for Solar-Driven Water Purification.

The global demand for clean and safe water will continue to grow well into the 21st century. Moving forward, the lack of access to clean water, which threatens human health and strains precious energy resources, will worsen as the climate changes. Therefore, future innovations that produce potable water from contaminated sources must be sustainable. Inspired by nature, a solar absorber gel (SAG) is developed to purify water from contaminated sources using only natural sunlight. The SAG is composed of an elastic thermoresponsive poly(N-isopropylacrylamide) (PNIPAm) hydrogel, a photothermal polydopamine (PDA) layer, and a sodium alginate (SA) network. Production of the SAG is facile; all processing is aqueous-based and occurs at room temperature. Remarkably, the SAG can purify water from various harmful reservoirs containing small molecules, oils, metals, and pathogens, using only sunlight. The SAG relies on solar energy to drive a hydrophilic/hydrophobic phase transformation at the lower critical solution temperature. Since the purification mechanism does not require water evaporation, an energy-intensive process, the passive solar water-purification rate is the highest reported. This discovery can be transformative in the sustainable production of clean water to improve the quality of human life.

Interfacial Engineering to Tailor the Properties of Multifunctional Ultralight Weight hBN-Polymer Composite Aerogels.

A common feature of aerogels is that they are brittle and suffer from poor mechanical properties. The development of high-performance, lightweight, and mechanically robust polymer composite aerogels may find use in a broad range of applications such as packaging, transportation, construction, electronics, and aerospace. Most aerogels are made of ceramic materials, such as silica, alumina, and carbide. These aerogels are dense and brittle. Two-dimensional (2D) layered nanostructures such as graphene, graphene oxide and hexagonal boron nitride (hBN) have promising potential in emerging technologies including those involved in extreme environmental conditions because they can withstand high temperatures, harsh chemical environments, and corrosion. Here, we report the development of highly porous, ultralightweight, and flexible aerogel composites made by the infiltration of various polymers into 2D hBN aerogels. The 2D hBN aerogels in which pore size could be controlled were fabricated using a unique self-assembly approach involving polystyrene nanoparticles as templates for ammonia borane into desired structures. We have shown that the physical, mechanical, and thermal properties of hBN-polymer composite aerogels can be tuned by the infiltration of different additives. We also performed theoretical calculations to gain insight into the interfacial interactions between the hBN-polymer structure, as the interface is critical in determining key material properties.

Nature inspired solid-liquid phase amphibious adhesive.

Here we report a new class of bio-inspired solid-liquid adhesive, obtained by simple mechanical dispersion of PVDF (polyvinylidene fluoride) (solid spheres) into PDMS (polydimethylsiloxane) (liquid). The adhesive behavior arises from strong solid-liquid interactions. This is a chemical reaction free adhesive (no curing time) that can be repeatedly used and is capable of instantaneously joining a large number of diverse materials (metals, ceramic, and polymer) in air and underwater. The current work is a significant advance in the development of amphibious multifunctional adhesives and presents potential applications in a range of sealing applications, including medical ones.

Graphene Supported MoS2 Structures with High Defect Density for an Efficient HER Electrocatalysts.

The development of novel efficient and robust electrocatalysts with sufficient active sites is one of the key parameters for hydrogen evolution reactions (HER) catalysis, which plays a key role in hydrogen production for clean energy harvesting. Recently, two-dimensional (2D) materials, especially those based upon transition metal dichalcogenides such as molybdenum disulfide (MoS2), have gained attention for the catalysis of hydrogen production because of their exceptional properties. Innovative strategies have been developed to engineer these material systems for improvements in their catalytic activity. Toward this aim, the facile growth of MoS2 clusters by sulfurization of molybdenum dioxide (MoO2) particles supported on reduced graphene oxide (rGO) foams using the chemical vapor deposition (CVD) method is reported. This approach created various morphologies of MoS2 with large edges and defect densities on the basal plane of rGO supported MoS2 structures, which are considered as active sites for HER catalysis. In addition, MoS2 nanostructures on the surface of the porous rGO network show robust physical interactions, such as van der Waals and π-π interactions between MoS2 and rGO. These features result in an improved process to yield a suitable HER catalyst. In order to gain a better understanding of the improvement of this MoS2-based HER catalyst, fully atomistic molecular dynamics (MD) simulations of different defect geometries were also performed.

Interface and defect engineering of hybrid nanostructures toward an efficient HER catalyst.

The hydrogen evolution reaction (HER) plays a key role in hydrogen production for clean energy harvesting. Designing novel efficient and robust electrocatalysts with sufficient active sites and excellent conductivity is one of the key parameters for hydrogen production using water splitting devices. Recently, low-dimensional carbon materials have gained attention as metal-free catalysts for hydrogen production. Such nanostructures need to be engineered to improve their catalytic activity. Here, we designed and synthesized a B and N doped carbon nanostructure (CNS)-hBN heterostructure as an improved HER catalyst. The hBN layers on CNS could provide exposed defects and edges that act as active sites for proton adsorption and reduction. The composition, structure and chemical properties of the B and N doped CNS-hBN heterostructure were tuned to obtain excellent HER activity. Detailed morphological, structural and electrochemical characterization demonstrated that the synergistic effect rising from the interaction between B and N doped CNS and hBN structures contributes to enhance the electrocatalytic performances. To get more insight into the role of defects and doping, we performed density functional theory (DFT) calculations on the CNS-hBN heterostructure.

Synthesis and 3D Interconnected Nanostructured h-BN-Based Biocomposites by Low-Temperature Plasma Sintering: Bone Regeneration Applications.

Recent advances and demands in biomedical applications drive a large amount of research to synthesize easily scalable low-density, high-strength, and wear-resistant biomaterials. The chemical inertness with low density combined with high strength makes h-BN one of the promising materials for such application. In this work, three-dimensional hexagonal boron nitride (h-BN) interconnected with boron trioxide (B2O3) was prepared by easily scalable and energy efficient spark plasma sintering (SPS) process. The composite structure shows significant densification (1.6-1.9 g/cm3) and high surface area (0.97-14.5 m2/g) at an extremely low SPS temperature of 250 °C. A high compressive strength of 291 MPa with a reasonably good wear resistance was obtained for the composite structure. The formation of strong covalent bonds between h-BN and B2O3 was formulated and established by molecular dynamics simulation. The composite showed significant effect on cell viability/proliferation. It shows a high mineralized nodule formation over the control, which suggests its use as a possible osteogenic agent in bone formation.

MoS2 -Carbon Nanotube Porous 3 D Network for Enhanced Oxygen Reduction Reaction.

Future generation power requirement triggers the increasing search for electrocatalysts towards oxygen reduction, which is the pivotal part to enhance the activity of metal-air batteries and fuel cells. The present article reports a novel 3 D composite structure weaving 1 D carbon nanotubes (CNT) and 2 D MoS2 nanosheets. The MoS2 -CNT composite exhibits excellent electrocatalytic activity for the oxygen reduction reaction (ORR) in alkaline environment. Measurements show better methanol immunity and higher durability than Pt/C, which is considered the state-of-the-art catalyst for ORR. Experimental results suggest that the hybridization of 1 D functionalized multiwalled CNTs (MWCNTs) and exfoliated 2 D MoS2 nanosheet results significant synergistic effect, which greatly promotes the ORR activity. This work presents a new avenue to rationally design a 3 D porous composite out of 1 D and 2 D interlaced components and demonstrate appreciable electrochemical performance of the materials towards ORR activity for fuel cells as well as metal-air batteries.

Lightweight Hexagonal Boron Nitride Foam for CO2 Absorption.

Weak van der Waals forces between inert hexagonal boron nitride (h-BN) nanosheets make it easy for them to slide over each other, resulting in an unstable structure in macroscopic dimensions. Creating interconnections between these inert nanosheets can remarkably enhance their mechanical properties. However, controlled design of such interconnections remains a fundamental problem for many applications of h-BN foams. In this work, a scalable in situ freeze-drying synthesis of low-density, lightweight 3D macroscopic structures made of h-BN nanosheets chemically connected by poly(vinyl alcohol) (PVA) molecules via chemical cross-link is demonstrated. Unlike pristine h-BN foam which disintegrates upon handling after freeze-drying, h-BN/PVA foams exhibit stable mechanical integrity in addition to high porosity and large surface area. Fully atomistic simulations are used to understand the interactions between h-BN nanosheets and PVA molecules. In addition, the h-BN/PVA foam is investigated as a possible CO2 absorption and as laser irradiation protection material.

Bacteria as Bio-Template for 3D Carbon Nanotube Architectures.

It is one of the most important needs to develop renewable, scalable and multifunctional methods for the fabrication of 3D carbon architectures. Even though a lot of methods have been developed to create porous and mechanically stable 3D scaffolds, the fabrication and control over the synthesis of such architectures still remain a challenge. Here, we used Magnetospirillum magneticum (AMB-1) bacteria as a bio-template to fabricate light-weight 3D solid structure of carbon nanotubes (CNTs) with interconnected porosity. The resulting porous scaffold showed good mechanical stability and large surface area because of the excellent pore interconnection and high porosity. Steered molecular dynamics simulations were used to quantify the interactions between nanotubes and AMB-1 via the cell surface protein MSP-1 and flagellin. The 3D CNTs-AMB1 nanocomposite scaffold is further demonstrated as a potential substrate for electrodes in supercapacitor applications.

Velcro-Inspired SiC Fuzzy Fibers for Aerospace Applications.

The most recent and innovative silicon carbide (SiC) fiber ceramic matrix composites, used for lightweight high-heat engine parts in aerospace applications, are woven, layered, and then surrounded by a SiC ceramic matrix composite (CMC). To further improve both the mechanical properties and thermal and oxidative resistance abilities of this material, SiC nanotubes and nanowires (SiCNT/NWs) are grown on the surface of the SiC fiber via carbon nanotube conversion. This conversion utilizes the shape memory synthesis (SMS) method, starting with carbon nanotube (CNT) growth on the SiC fiber surface, to capitalize on the ease of dense surface morphology optimization and the ability to effectively engineer the CNT-SiC fiber interface to create a secure nanotube-fiber attachment. Then, by converting the CNTs to SiCNT/NWs, the relative morphology, advantageous mechanical properties, and secure connection of the initial CNT-SiC fiber architecture are retained, with the addition of high temperature and oxidation resistance. The resultant SiCNT/NW-SiC fiber can be used inside the SiC ceramic matrix composite for a high-heat turbo engine part with longer fatigue life and higher temperature resistance. The differing sides of the woven SiCNT/NWs act as the "hook and loop" mechanism of Velcro but in much smaller scale.

Role of Atomic Layer Functionalization in Building Scalable Bottom-Up Assembly of Ultra-Low Density Multifunctional Three-Dimensional Nanostructures.

Building three-dimensional (3D) structures from their constituent zero-, one-, and two-dimensional nanoscale building blocks in a bottom-up assembly is considered the holey grail of nanotechnology. However, fabricating such 3D nanostructures at ambient conditions still remains a challenge. Here, we demonstrate an easily scalable facile method to fabricate 3D nanostructures made up of entirely zero-dimensional silicon dioxide (SiO2) nanoparticles. By combining functional groups and vacuum filtration, we fabricate lightweight and highly structural stable 3D SiO2 materials. Further synergistic effect of material is shown by addition of a 2D material, graphene oxide (GO) as reinforcement which results in 15-fold increase in stiffness. Molecular dynamics (MD) simulations are used to understand the interaction between silane functional groups (3-aminopropyl triethoxysilane) and SiO2 nanoparticles thus confirming the reinforcement capability of GO. In addition, the material is stable under high temperature and offers a cost-effective alternative to both fire-retardant and oil absorption materials.

Ballistic Fracturing of Carbon Nanotubes.

Advanced materials with multifunctional capabilities and high resistance to hypervelocity impact are of great interest to the designers of aerospace structures. Carbon nanotubes (CNTs) with their lightweight and high strength properties are alternative to metals and/or metallic alloys conventionally used in aerospace applications. Here we report a detailed study on the ballistic fracturing of CNTs for different velocity ranges. Our results show that the highly energetic impacts cause bond breakage and carbon atom rehybridizations, and sometimes extensive structural reconstructions were also observed. Experimental observations show the formation of nanoribbons, nanodiamonds, and covalently interconnected nanostructures, depending on impact conditions. Fully atomistic reactive molecular dynamics simulations were also carried out in order to gain further insights into the mechanism behind the transformation of CNTs. The simulations show that the velocity and relative orientation of the multiple colliding nanotubes are critical to determine the impact outcome.

3D Porous Graphene by Low-Temperature Plasma Welding for Bone Implants.

3D scaffolds of graphene, possessing ultra-low density, macroporous microstructure, and high yield strength and stiffness can be developed by a novel plasma welding process. The bonding between adjacent graphene sheets is investigated by molecular dynamics simulations. The high degree of biocompatibility along with high porosity and good mechanical properties makes graphene an ideal material for use as body implants.

Synthesis of ultralow density 3D graphene-CNT foams using a two-step method.

Here, we report a highly scalable two-step method to produce graphene foams with ordered carbon nanotube reinforcements. In our approach, we first used solution assembly methods to obtain graphene oxide foam. Next, we employed chemical vapor deposition to simultaneously grow carbon nanotubes and thermally reduce the 3D graphene oxide scaffold. The resulting structure presented increased stiffness, good mechanical stability and oil absorption properties. Molecular dynamics simulations were carried out to further elucidate failure mechanisms and to understand the enhancement of the mechanical properties. The simulations showed that mechanical failure is directly associated with bending of vertical reinforcements, and that, for similar length and contact area, much more stress is required to bend the corresponding reinforcements of carbon nanotubes, thus explaining the experimentally observed enhanced mechanical properties.

The structural and dynamical aspects of boron nitride nanotubes under high velocity impacts.

This communication report is a study on the structural and dynamical aspects of boron nitride nanotubes (BNNTs) shot at high velocities (∼5 km s(-1)) against solid targets. The experimental results show unzipping of BNNTs and the formation of hBN nanoribbons. Fully atomistic reactive molecular dynamics simulations were also carried out to gain insights into the BNNT fracture patterns and deformation mechanisms. Our results show that longitudinal and axial tube fractures occur, but the formation of BN nanoribbons from fractured tubes was only observed for some impact angles. Although some structural and dynamical features of the impacts are similar to the ones reported for CNTs, because BNNTs are more brittle than CNTs this results in a larger number of fractured tubes but with fewer formed nanoribbons.

Strain Rate Dependent Shear Plasticity in Graphite Oxide.

Graphene oxide film is made of stacked graphene layers with chemical functionalities, and we report that plasticity in the film can be engineered by strain rate tuning. The deformation behavior and plasticity of such functionalized layered systems is dominated by shear slip between individual layers and interaction between functional groups. Stress-strain behavior and theoretical models suggest that the deformation is strongly strain rate dependent and undergoes brittle to ductile transition with decreasing strain rate.

Indentation Tests Reveal Geometry-Regulated Stiffening of Nanotube Junctions.

Here we report a unique method to locally determine the mechanical response of individual covalent junctions between carbon nanotubes (CNTs), in various configurations such as "X", "Y", and "Λ"-like. The setup is based on in situ indentation using a picoindenter integrated within a scanning electron microscope. This allows for precise mapping between junction geometry and mechanical behavior and uncovers geometry-regulated junction stiffening. Molecular dynamics simulations reveal that the dominant contribution to the nanoindentation response is due to the CNT walls stretching at the junction. Targeted synthesis of desired junction geometries can therefore provide a "structural alphabet" for construction of macroscopic CNT networks with tunable mechanical response.

Synthesis of Low-Density, Carbon-Doped, Porous Hexagonal Boron Nitride Solids.

Here, we report the scalable synthesis and characterization of low-density, porous, three-dimensional (3D) solids consisting of two-dimensional (2D) hexagonal boron nitride (h-BN) sheets. The structures are synthesized using bottom-up, low-temperature (∼300 °C), solid-state reaction of melamine and boric acid giving rise to porous and mechanically stable interconnected h-BN layers. A layered 3D structure forms due to the formation of h-BN, and significant improvements in the mechanical properties were observed over a range of temperatures, compared to graphene oxide or reduced graphene oxide foams. A theoretical model based on Density Functional Theory (DFT) is proposed for the formation of h-BN architectures. The material shows excellent, recyclable absorption capacity for oils and organic solvents.

Ambient solid-state mechano-chemical reactions between functionalized carbon nanotubes.

Carbon nanotubes can be chemically modified by attaching various functionalities to their surfaces, although harsh chemical treatments can lead to their break-up into graphene nanostructures. On the other hand, direct coupling between functionalities bound on individual nanotubes could lead to, as yet unexplored, spontaneous chemical reactions. Here we report an ambient mechano-chemical reaction between two varieties of nanotubes, carrying predominantly carboxyl and hydroxyl functionalities, respectively, facilitated by simple mechanical grinding of the reactants. The purely solid-state reaction between the chemically differentiated nanotube species produces condensation products and unzipping of nanotubes due to local energy release, as confirmed by spectroscopic measurements, thermal analysis and molecular dynamic simulations.

Chemical Makeup and Hydrophilic Behavior of Graphene Oxide Nanoribbons after Low-Temperature Fluorination.

Here we investigated the fluorination of graphene oxide nanoribbons (GONRs) using H2 and F2 gases at low temperature, below 200 °C, with the purpose of elucidating their structure and predicting a fluorination mechanism. The importance of this study is the understanding of how fluorine functional groups are incorporated in complex structures, such as GONRs, as a function of temperature. The insight provided herein can potentially help engineer application-oriented materials for several research and industrial sectors. Direct (13)C pulse magic angle spinning (MAS) nuclear magnetic resonance (NMR) confirmed the presence of epoxy, hydroxyl, ester and ketone carbonyl, tertiary alkyl fluorides, as well as graphitic sp(2)-hybridized carbon. Moreover, (19)F-(13)C cross-polarization MAS NMR with (1)H and (19)F decoupling confirmed the presence of secondary alkyl fluoride (CF2) groups in the fluorinated graphene oxide nanoribbon (FGONR) structures fluorinated above 50 °C. First-principles density functional theory calculations gained insight into the atomic arrangement of the most dominant chemical groups. The fluorinated GONRs present atomic fluorine percentages in the range of 6-35. Interestingly, the FGONRs synthesized up to 100 °C, with 6-19% of atomic fluorine, exhibit colloidal similar stability in aqueous environments when compared to GONRs. This colloidal stability is important because it is not common for materials with up to 19% fluorine to have a high degree of hydrophilicity.